Specifically designed for acoustic-electric bass.

The AB50 Bass Combo Amp is the first amplifier specifically designed for Acoustic-Electric Bass. The 50W AB50 is a 1x10 amplifier that offers you simple operation, great bass tone and dashing looks. Two combination XLR/1/4" input jacks so that you can plug a high or low impedance device into either channel. Stereo 1/8" Line-in and headphone jack enables you to jam with your favorite CDs or MP3s right through your amp, without ticking the neighbors off.

Acoustic brand amps have always been known for their durability and simplicity. Designed by musicians, they sport unique and useful features, have outstanding tone, and are louder and more powerful than many similarly priced amps.

Acoustic AB50 Acoustic Bass Combo Amplifier Features:

• First amp designed for use with an acoustic bass
• 50W
• 10" speaker + tweeter
• Tilt-back wedge shaped cabinet
• 2 dual purpose inputs (1/4" & XLR Mic)
• Independent volume controls
• 1/8" Stereo Line-in & Headphone
• Simple operation
• Tolex covering
• Nickel corners
• Aluminum capped knobs
• Rubber strap handle
• Rubber feet
• Poly-cone, rubber surround with high-frequency tweeter
• Blue accents, white type
• Blue LED
• Grey speaker cones
• Black grille
• White piping

Amplify your acoustic-electric bass with an amp made specifically for the job. Order today.

Dial up great sound in an instant.

The Acoustic AG15 acoustic amp is the perfect starter piece for acoustic guitar players looking to amplify their instrument, especially for those playing small clubs and coffee houses, looking to cart around a light but reasonably loud amplifier.

With its angled-up wedge shape, the AG15 acoustic amplifier is designed to maximize projection. For warm, full frequency sound, it features an 8 studio monitor style speaker for soft mid and low-frequency response and a coaxial tweeter for ultra-clear, sparkling high end. The front panel is simple and easy to use, but intended to give you satisfying control over your tone, with a volume control and 3-Band EQ. Also included is a built-in chorus effect with its own depth knob and on/off switch.

For quiet playing, use the included an 1/8 stereo headphone jack, and for pre-recorded accompaniment, the AG15 amp has an 1/8 stereo aux input. Plug in a CD or MP3 player and play along. Finally, a Line Out affords you the opportunity to send your signal to a PA, for amplification in larger spaces.

Acoustic AG15 15W 1x8 Acoustic Guitar Combo Amp Specifications:

• Power: 15W RMS
• Equalizer: Low - &plumn;15dB at 80Hz, Med - ± 15dB at 650Hz, High - ±15dB at 10kHz
• Channels: 1
• Speaker: 8" Coax Studio Monitor Style
• Dimensions: 16" x 15" x 16.8"
• Weight: 32 lbs.

Acoustic AG15 15W 1x8 Acoustic Guitar Combo Amp Features:

• Built in chorus effect
• 1/8 MP3 Aux in
• 1/8 stereo headphone in/speaker mute
• Line Out
• Heavyweight cloth grill
• Heavy-duty 8" coax studio monitor-style speaker
• Angled monitor-style cabinet projects sound upward
• Rugged and comfortable handle
• Easy-to-read control panel
• Protective, long-lasting covering

Save BIG when you buy today!

Fast-Tone technology allows you to dial up great sound in an instant.

The Acoustic AG30 acoustic amp is perfect for performing singer/songwriters looking for an easy and excellent way to amplify their instrument and voice without having to cart around multiple pieces of gear.

The AG30 is designed to maximize projection, with its angled, floor-monitor style cabinet. For warm, full frequency sound, the cabinet features an 8 studio monitor style speaker for soft mid and low-frequency response and a coaxial tweeter for ultra-clear, sparkling high end. Each of the two channels has a combination input that allows you to plug an instrument into the 1/4' unbalanced plug or a microphone into the XLR balanced plug. The 3 band EQ with sweepable mid band provides satisfying control over your tone. Also included is a selectable effects section, with 16 high-quality digital effects, including reverbs, delays and choruses. A chart detailing each effect is located on top of your acoustic amp, so you ll never lose it.

For quiet playing, use the 1/8 stereo headphone jack, and for pre-recorded accompaniment, the AG30 amp has an 1/8 stereo aux input. Plug in a CD or MP3 player and play along. Finally, a Line Out affords you the opportunity to send your signal to a PA, for amplification in larger spaces.

Acoustic AG30 30W 1x8 Acoustic Guitar Combo Amp Specifications:

• Power: 30W RMS
• Equalizer: Low - &plumn;15dB at 80Hz, Med - ± 15dB at 500Hz, High - ± 15dB at 10kHz
• Channels: 2 — each with combo input jacks and volume controls
• Speaker: 8" Coax Studio Monitor Style
• Dimensions: 18.3" x 17" x 18.8"
• Weight: 44 lbs.

Acoustic AG30 30W 1x8 Acoustic Guitar Combo Amp Features:

• 16 high-quality digital effects,
• Two channels - combination input 1/4' unbalanced plug or a microphone into the XLR balanced plug
• 1/8 stereo headphone jack
• 1/8 stereo aux input
• Line Out
• Heavyweight cloth grill
• Heavy-duty 8" coax studio monitor-style speaker
• Angled monitor-style cabinet projects sound upward
• Rugged and comfortable handle
• Easy-to-read control panel
• Protective, long-lasting covering

Save BIG when you buy today!

Project the very best of your musical voice.

The AG60 acoustic guitar amp is simple to operate, simple to maintain, and its Fast-Tone technology allows you to dial up great sound in an instant.

The AG60 amplifier features 2 8" studio monitor style speakers with polypropylene cone speakers and rubber surrounds. This produces a very soft, warm, low frequency response. Additionally, the coaxial tweeter provides a chime-like clarity to your high frequencies.

Designed to sound great with any acoustic instrument, the AG60 amplifier's select components allow you quickly find the voice of your instrument and project it beyond your personal performance space.

No matter what your style of playing or choice of acoustic instrument, you will find that the Acoustic AG60 amp will capture and project the very best of your musical voice.

Acoustic AG60 60W 2x8 Acoustic Guitar Combo Amp Specifications:

• Power: 60W RMS
• Equalizer: Low - &plumn;15dB at 80Hz, Med - ± 15dB sweepable from 500Hz, to 1.2kHz, High - ± 15dB at 10kHz
• Channels: 2 — each with dual input jacks and volume controls
• Speakers: Twin 8" Coax Studio Monitor Style
• Dimensions: 21.3" x 15" x 20.8"
• Weight: 58 lbs.

Acoustic AG60 60W 2x8 Acoustic Guitar Combo Amp Features:

• Heavyweight cloth grill
• Heavy-duty 8" coax studio monitor-style speaker
• Angled monitor-style cabinet projects sound upward
• Rugged and comfortable handle
• Easy-to-read control panel
• Protective, long-lasting covering

Save BIG when you buy today!

A seriously powerful amp for serious bassists.

The Acoustic B100 combo is designed for club and live applications where the sound of its 15" bass driver will fill the room with warmth and punch. It pumps 100 watts RMS into the internal speaker, delivering the classic Acoustic pro's tone in a portable, powerful design.

The two bass inputs are designed to accommodate both active and passive bass instruments while the Gain and Volume controls give you complete authority over the character of your tone. Increase the Gain for some old-school rock tones, or lower it and turn up the volume for great, clean classic or funk tones. The preamp includes a very natural and tube-like compression as well as a harmonically rich distortion circuit, which keeps your tone musical-even at high volume levels.

The B100 also includes a notch filter to tailor your mids and a four-band EQ that provides total control over your tone. The parallel Effects Loop allows you to use your bass effects in the signal chain, or you can use theEffect Send as a Line Out to a recording or live mixing board. The series extension speaker jack provides an output for an additional cabinet such as the Acoustic B115 or B410.

The heritage of Acoustic comes through loud and clear in the B100.

Acoustic B100 100W 1x15 Bass Combo Features:

• Extra goodies: Ground Lift, Effect Loop
  
  Options:
  
• B115 1x15 bass cabinet
• B410 4x10 bass cabinet

Save BIG when you buy today!

Classic warm Acoustic amp tone.

The Acoustic B115 bass cabinet has a professional enclosure designed for large clubs and live applications where it will fill any stage with depth and definition. Used in conjunction with the Acoustic B200H head, the B115 cabinet will easily handle the power of the amplifier and provide wall-shaking lows and a massive bottom end. Although conservatively rated at 250 Watts RMS, any combination of B115 or B410 cabinets may be used for larger venues.

The B115 bass cabinet features a rock-solid, tuned and ported design with heavy internal bracing, caster sockets and professional spring-loaded touring handles with rubber grips. Heavy-duty rubber feet allow secure stacking and ensure solid placement on any floor surface. Rear panel features include a recessed jackplate with parallel dual 1/4" jacks and a horn on/off switch.

Classic Acoustic cosmetics include nickel corners, black grille cloth with white piping, heavy-duty road-worthy covering material and steel trim strips with understated blue accent color. It all adds to the durability (and legacy vibe) of this great cabinet.

The heritage of Acoustic comes through loud and clear in the B115- a seriously professional stage enclosure for serious bassists.

Acoustic B115 250w 1x15 Bass Cabinet Specifications:

• 24"W x 25"H x 16"D
• 63 lbs.

Acoustic B115 250w 1x15 Bass Cabinet Features:

• Power: 250W power handling
• Speaker: 15" heavy-duty speaker, high-frequency horn with on/off switch
• Impedance: 8 ohms
• Input: parallel 1/4" input jacks
• Heavy-duty spring-loaded touring handles
• Damage resistant vinyl covering
• Caster sockets (casters sold separately)

Order today and get equipped to pound down the groove.

Great tone for practice or low level jams.

The B20 bass combo amp from Acoustic offers you simple operation, great bass tone and dashing looks. Dual 1/4" input jacks mean you don't have to search for adapters or direct boxes anymore. Stereo 1/8" Line-in and headphone jack let you to jam with your favorite CDs or MP3s right through your amp, without ticking the neighbors off.

Acoustic brand amps have always been known for their durability and simplicity. Designed by musicians, they sport unique and useful features, have outstanding tone, and are louder and more powerful than many similarly priced amps.

Acoustic B20 1x12 Bass Combo Amplifier Features:

• 20W
• 12" speaker
• Mp3 player input
• Headphone out
• Dual 1/4" input jacks
• 1/8" Stereo Line-in & Headphone
• Simple operation
• Tolex covering
• Nickel corners
• Aluminum capped knobs
• Acoustic branded strap handle
• Rubber feet
• Full range bass driver
• Blue accents, white type
• Blue LED
• Grey speaker cones
• Black grille
• White piping

Order today and enjoy a simple, inexpensive, but very likable amp.

A seriously powerful amp for serious bassists.

The Acoustic B200 professional combo is designed for large club and live applications where the sound of its 15" bass driver and horn will fill the stage with warmth and punch. That's because it pounds a massive 200 watts RMS into the internal 15" speaker, delivering the classic Acoustic pro's tone in a portable, professional design.

The two bass inputs are designed to accommodate both active and passive bass instruments while the Gain and Volume controls give you complete control over the character of your tone. Increase the gain for some old school rock tones, or lower it and turn up the volume for great clean, classic or funk tones. The preamp includes a very natural and tube-like compression as well as a harmonically rich distortion circuit, which keeps your tone musical-even at high volume levels. The B200 also includes a frequency sweepable -10dB notch filter to tailor your mids, and a six-band EQ for exact control over every nuance of your bass's tone.

Rear panel features include a parallel effects loop, tweeter on/off switch, and XLR balanced Line Out with Level Control and Ground Lift. The series extension speaker jack provides an output for an additional cabinet such as the Acoustic B115 or B410.

The heritage of Acoustic comes through loud and clear in the B200-a seriously professional amp for serious bassists.

Acoustic B200 200W 1x15 With Tweeter Bass Combo Specifications:

• 20"W x 24-3/4"H x 15"D
• 75 lbs.

Acoustic B200 200W 1x15 With Tweeter Bass Combo Features:

• Extra goodies:
• Ground Lift, Effect Loop
  
  Options:
• B115 1x15 Bass Cabinet
• B410 4x10 Bass Cabinet
• Power: 200 Watts @ 4 Ohms
• Speaker: 15" Heavy-duty speaker, built-in horn
• Channels: 1
• EQ: 6-Band EQ - sweepable
• Frequency notch filter
• Inputs: dual inputs (passive & active)
• Outs: XLR direct out
• Caster sockets (casters sold separately)

A classic bass amp name returns in style! Order today and live the legend.

A seriously powerful amp for serious bassists.

The Acoustic B200H professional head is designed for large club and live applications where it will fill any stage with depth and definition. Used in conjunction with the B115 and/or B410 enclosures, the B200H will easily drive either one or two cabinets in any combination of your choice.

The two bass inputs are designed to accommodate both active and passive bass instruments while the Gain and Volume controls give you complete control over the character of your tone. Increase the gain for some old school rock tones, or lower it and turn up the volume for great clean, classic or funk tones. The preamp includes a very natural and tube-like compression as well as a harmonically rich distortion circuit, which keeps your tone musical-even at high volume levels. The B200H also includes a notch filter to tailor your mids, and a six-band EQ for exact control over every nuance of your bass's tone.

Rear panel features include a parallel Effects Loop, and XLR balanced Line Out with Level Control and Ground Lift. The two speaker output jacks allow you to directly connect to each enclosure (such as the B115 and/or B410) to maximize your tone and power.

The heritage of Acoustic comes through loud and clear in the B200H-a seriously professional stage head for serious bassists.

Acoustic B200H 200W Bass Head Features:

• Extra goodies:
• Ground Lift, Effect Loop
  
  Options:
• B115 1x15 Bass Cabinet
• B410 4x10 Bass Cabinet
• Power: 200 Watts @ 4 Ohms
• Speaker: 15" Heavy-duty speaker, built-in horn
• Channels: 1
• EQ: 6-Band EQ - sweepable
• Frequency notch filter
• Inputs: dual inputs (passive & active)
• Outs: XLR direct out

A classic bass amp name returns in style! Order today and live the legend.

A serious head and a wicked cab: together at last.

Now get both the B200H bass head and B115 1x15 cabinet as a package deal. With these two monsters in your arsenal, there's no venue you can't shake up.

The B200H 200W Bass Head:

The Acoustic B200H professional head is designed for large club and live applications where it will fill any stage with depth and definition. Used in conjunction with the B115, the B200H will easily drive either one or two cabinets in any combination of your choice.

The two bass inputs are designed to accommodate both active and passive bass instruments while the Gain and Volume controls give you complete control over the character of your tone. Increase the gain for some old school rock tones, or lower it and turn up the volume for great clean, classic or funk tones. The preamp includes a very natural and tube-like compression as well as a harmonically rich distortion circuit, which keeps your tone musical — even at high volume levels. The B200H also includes a notch filter to tailor your mids, and a six-band EQ for exact control over every nuance of your bass's tone.

Rear panel features include a parallel Effects Loop, and XLR balanced Line Out with Level Control and Ground Lift. The two speaker output jacks allow you to directly connect to each enclosure (such as the B115 and/or B410) to maximize your tone and power.

The heritage of Acoustic comes through loud and clear in the B200H-a seriously professional stage head for serious bassists.

The B115 250W 1x15 Bass Cabinet

The Acoustic B115 bass cabinet has a professional enclosure designed for large clubs and live applications. Used in conjunction with the Acoustic B200H head, the B115 cabinet will easily handle the power of the amplifier and provide wall-shaking lows and a massive bottom end. Although conservatively rated at 250 Watts RMS, any combination of B115 or B410 cabinets may be used for larger venues.

The B115 bass cabinet features a rock-solid, tuned and ported design with heavy internal bracing, caster sockets and professional spring-loaded touring handles with rubber grips. Heavy-duty rubber feet allow secure stacking and ensure solid placement on any floor surface. Rear panel features include a recessed jackplate with parallel dual 1/4" jacks and a horn on/off switch.

Classic Acoustic cosmetics include nickel corners, black grille cloth with white piping, heavy-duty roadworthy covering material, and steel trim strips with understated blue accent color. It all adds to the durability (and legacy vibe) of this great cabinet.

The heritage of Acoustic comes through loud and clear in the B115 — a seriously professional stage enclosure for serious bassists.

Acoustic B200H 200W Bass Head and B115 250W 1x15 Bass Cab Package Specifications:

• B115 Cabinet:
• 24"W x 25"H x 16"D
• 63 lbs.

Acoustic B200H 200W Bass Head and B115 250W 1x15 Bass Cab Package Features:

• B200H Head:
  
  Extra goodies:
• Ground Lift
• Effect Loop
  
  Options:
• Power: 200 Watts @ 4 Ohms
• Speaker: 15" Heavy-duty speaker, built-in horn
• Channels: 1
• EQ: 6-Band EQ - sweepable
• Frequency notch filter
• Inputs: dual inputs (passive & active)
• Outs: XLR direct out
  
  B115 Cabinet:
  
  Other goodies: Heavy-duty spring-loaded touring handles
• Damage-resistant vinyl covering
• Caster sockets
  
  Power: 250 watts power handling
• Speaker: 15" heavy-duty speaker, high-frequency horn with on/off switch
• Impedance: 8 ohms
• Input: parallel 1/4" input jacks

Save BIG when you buy today!

Wall-shaking lows with tons of punch.

The Acoustic B410 bass cabinet has a professional enclosure designed for large clubs and live applications where it will fill any stage with depth and definition. Used in conjunction with the Acoustic B200H head, the B410 cabinet will easily handle the power of the amplifier and provide wall-shaking lows and massive bottom end. Although conservatively rated at 400 watts RMS, any combination of B115 or B410 cabinets may be used for larger venues.

The B410 bass cabinet features a rock-solid, sealed design with heavy internal bracing, caster sockets and professional spring-loaded touring handles with rubber grips. Heavy-duty rubber feet allow secure stacking and ensure solid placement on any floor surface. Rear panel features include a recessed jackplate with parallel dual 1/4" jacks and a horn on/off switch.

Classic Acoustic cosmetics include nickel corners, black grille cloth with white piping, heavy-duty road-worthy covering material and steel trim strips with understated blue accent color. It all adds to the durability (and legacy vibe) of this great cabinet.

The heritage of Acoustic comes through loud and clear in the B410-a seriously professional stage enclosure for serious bassists.

Acoustic B410 400W 4x10 Bass Cabinet Features:

• Power: 400 watts power handling
• Speaker: 4 x 10" heavy-duty speakers, high-frequency with on/off switch
• Impedance: 8 Ohms
• Input: Parallel 1/4" Input Jacks
• Other goodies: heavy-duty tour handles, damage resistant vinyl covering, caster sockets (casters sold separately)

Order today and pound down the groove.

Wall-shaking lows with tons of punch.

The Acoustic B410 bass cabinet has a professional enclosure designed for large clubs and live applications where it will fill any stage with depth and definition. Used in conjunction with the Acoustic B200H head, the B410 cabinet will easily handle the power of the amplifier and provide wall-shaking lows and massive bottom end. Although conservatively rated at 400 watts RMS, any combination of B115 or B410 cabinets may be used for larger venues.

The B410 bass cabinet features a rock-solid, sealed design with heavy internal bracing, caster sockets and professional spring-loaded touring handles with rubber grips. Heavy-duty rubber feet allow secure stacking and ensure solid placement on any floor surface. Rear panel features include a recessed jackplate with parallel dual 1/4" jacks and a horn on/off switch.

Classic Acoustic cosmetics include nickel corners, black grille cloth with white piping, heavy-duty road-worthy covering material and steel trim strips with understated blue accent color. It all adds to the durability (and legacy vibe) of this great cabinet.

The heritage of Acoustic comes through loud and clear in the B410-a seriously professional stage enclosure for serious bassists.

Acoustic B410 400W 4x10 Bass Cabinet - Scratch 'n' Dent Features:

• Power: 400 watts power handling
• Speaker: 4 x 10" heavy-duty speakers, high-frequency with on/off switch
• Impedance: 8 Ohms
• Input: Parallel 1/4" Input Jacks
• Other goodies: heavy-duty tour handles, damage resistant vinyl covering, caster sockets (casters sold separately)

Order today and pound down the groove.

The best has just gotten better.

The AER AcousticCube 3 Guitar Amp is an amazing feat in a small box like this. For more than 10 years this little giant has set standards and AER have done their best to push the limits further and further.

In its 3rd generation now, AER have implemented advanced dynamic control technology and have extended the dynamic range substantially. The two-way speaker system is an incredible improvement. It allows a much clearer and defined bass response and much lighter, more vivid reproduction of the complete range up to finest texture.

The Cube 3 amplifier is a full two-channel version now allowing identical features on both channels. It needed a face-lift for more operational clarity and to allow additional important controls on the front panel.

In essence AER has combined all the suggestions of Cube enthusiasts over the years with all their knowledge and experience without compromise and are now pleased with version 3's improvements to sound, dynamics, presence, and natural sound. Not to mention the features.

Tone Control:
The AcoustiCube 3 amp's three band tone controls are active and constructed to fulfill the specific requirements of both acoustic instruments and other sources. The color switches activate a mid-cut-treble-boost-filter that especially suits finger picking.

AER DSP 4 Digital Effect internal effect The AcoustiCube 3 has a built-in (internal) digital 32bit AER-effect processor. With the effect program endless-encoder you can choose between 100 (0-99) effect programs (factory settings: chapter 6). The number of the chosen effect can be seen in the two-digit display. The direction in which you turn the control does not matter.

You can connect your AER AcoustiCube with a computer via USB-cable, change the effect program parameters that suit your requirements, make combinations and store them under a new name. Two of the 100 effects can be stored and recalled via the AER footswitch. You can select an effect and by pressing the program-encoder on your AcoustiCube amp, this effect is stored.

New for version 3
• Two identical channels • Bass-reflex cabinet separated from the electronics • Two-way speaker system • 44V dynamic reserve in pre-amp EQ range • Separately adjustable and stabilized power source • Pre-amp matrix: three pre-amps, two phantom power, combi-modus • 32bit digital processor with USB-interface for parameter adjustment manipulation • Aux in, mute, insert

AER AcoustiCube 3 Guitar Combo Amp Specifications:

• Channel 2 same as channel 1
• Input 2: input channel 2
• Input 1: input channel 1
  
  LED chain: chain display for status and pre-amp choice
• Clip: overload indicator
• Mute: channel mute indicator
• Piezo: sources with piezo level, instruments with passive pick-up systems only
• Line: sources with line-level, instruments with active pre-amps and/or magnetic pickups
• 9V: phantom supply for line function is switched on when mode switch is pressed in line modus for three seconds
• Mic: sources with mic-level, balanced and unbalanced
• 48V: phantom supply 48V for mic function is switched on when mode switch is pressed in mic modus for three seconds
• E/P: Electret-microphone/Piezo pick-up
  
  Mode: tip switch for input mode section
• Pad: switch to adjust input sensitivity
• Gain: input level control
• Color: switch to activate mid-range contour filter
• Mute: mute control switch
• Bass: tone control for bass
• Middle: tone control for mid-range
• Treble: tone control for treble
• Program: continuous program-selector encoder with memory-function, internal effect
  
  Channel pan: effect panorama control - left: channel 1, mid: channel 1+2, right: channel 2
• Return: effect return control, adds internal effect
• Power: power indicator
• Pre master: level control for L-out, R-out and record ch1/ch 2 out
• Master: level control for the overall
  
  Rear Module (from left to right)
• Tuner: tuner output without tone control and effects
• Phones: stereo-headphone output including effects and aux-in signal. Use stereo plugs only!
• Sub: 6.3 mm jack as an output to drive an active sub-bass, AER SUB 12/400A
• Line: output for active loudspeaker box including tone control and effect, dependent on the master-control
• L-out: line-out, adjustable via pre-master with tone control, effect, stereo reproduction of external effect and aux-in
• R-out: line-out, adjustable via pre master with tone control, effect, stereo reproduction of external effect and aux-in
• Record ch1/ch2: stereo jack, tip: channel 1 and ring: channel 2, including tone control, without effect, pre-master
• Master insert: effect loop: input->return = ring / output -> send = tip, for serial effect looping or connection of AER amps via link-function (chapter10)
• Aux in: cinch-input L/R for e.g. CD player
• Aux-return: aux-return-control, mixes the aux-in signal to the overall signal
• Presence: presence-control, treble attenuation from 4kHz
• DI-level DI-level-control, controls the level of the DI-signal
• DI pre/post: DI-signal pre or post effect
• DI balanced: XLR-output, pre-master, no tone control
• Notch: notch-filter, center-frequency 120Hz, for attenuation of feedback or instrument interference
• USB: USB-port, connection of the AER DSPs with your computer for changing the effect parameters
• Master ctrl.: Multipin-DIN-jack for connecting the AER footswitch
• Effect 2 (external effect): send output with EQ for external effect unit
• Pan: effect channel control for external effect (left: channel 1, middle: channel 1 + 2, right: channel 2), internal effect
• Return: stereo jack for external effect unit or other signal-source
• Ser/par: switch for serial or parallel effect mode
• mic input: balanced and unbalanced, parallel with front panel input 2
  
  Back Panel (left to right)
• Power: power jack with fuse holder
• Voltage selector: voltage selector switch 115/230V
• Ground lift: ground lift switch that disconnects signal ground from protective conductor
• Speaker out: socket for passive bass box, e.g. AER SUB 12/250P
  
  Channel 1/2
• Piezo: balanced/unbalanced
• Sensitivity: -26dBV, -11dBV with
• Pad switch: on
• Noise: < -82dBV
• Line/EP: unbalanced
• Sensitivity: -28dBV, -13dBV with
• Pad switch: on, Switchable 9V phantom power on ring ( 2x100mA max)
• Noise < -80dBV
• Mic balanced
• Sensitivity -38dBV
• Noise: < -80dBV, Switchable 48V phantom power
• Aux in: L/R Cinch, unbalanced , 2x560mV >5 k ohms(impedance depending on "return" setting),
• Effect 2: return Jack, stereo, unbalanced, 2x 750 mV, >5 k ohms(impedance depending on "return" setting, left channel on internal speaker
• Clip indicator: Headroom 6 dB
  
  OUTPUT
• Tuner jack: 1.3V, 100 ohms
• Phones jack: stereo, max. 1.7 V RMS, max. 2x 100 mW into 32 ohms, for headphones only. Do not connect to other devices, do not use mono plugs.
• DI out XLR: adjustable 60-240 mV, 100 ohms, balanced, pre/post effect
• Sub bass jack: max. 1.4V (post master), 100 ohms, with left channel of effects Activates 200 Hz active crossover for built-in speaker
• Line out jack: max. 1.4V (post master), 100 ohms, with right channel of effects
• L out, R out jack: adjustable 0 1.4 V, 100 ohms,
  
  Stereo effects, balanced
• Record out: channel 1/2, Jack, 1.2V, 100 ohms
• Effect 2 send jack: max. 1.2V depending on "pan" setting, 100 ohms
  
  Speaker out
• Subwoofer output: jack, max. 120 W into 8 ohms, Use only 8 ohms passive subwoofer, with built-in 200 Hz crossover (AER Sub10/200P). Not suitable for full-range external speaker.
  
  Master control: 8-pin DIN socket , for Acousticube IIa footswitch, features:
• Ch. 1/2: volume control / mute (max 40dB gain reduction)
• Effects memory: 1/2 toggle
• Effect 1/2: on/off
  
  EQ Channel 1
  
• Bass: ñ10 dB / 60 Hz
• Middle: ñ6 dB / 600 Hz
• Treble: ñ13 dB / 13 kHz
• Color: 3 dB bei 100 Hz, +6 dB bei 10 kHz
  
  Channel 2
  
• Bass: ñ12 dB / 100 Hz
• Middle: ñ12 dB / 1 kHz
• Treble ñ12 dB / 10 kHz
• Presence filter: +0/ 16 dB / 10 kHz
• Notch filter: -24 dB at 120 Hz BW-12 dB= 36 Hz
• Analog signal processing: AER low-distortion limiter, subsonic filter
• Built-in effects: AER 32-bit digital effects processor, 100 presets
• Power amp: 120 W sine-wave into 8 ohms, discrete bipolar transistor design
• Limiter: threshold 100 W
• Speaker system: 2-way speaker
• 8" (20 cm): low-midrange Hexacone driver, Neodym magnet
• 1" (25 mm): dome tweeter Neodym magnet
• AC power: AC 115/230 V (switchable), 50 60 Hz, max. 200 W
• Mains fuse: slow 3.15 A, 5x20 mm
• Cabinet: 15 mm (0.59") birch plywood, Finish water based acrylic, black spatter finish
• Dimensions 330 x 330 x 265 mm (13"x13"x10.4") W x H x D
• Weight 13.00 kg (28,66 lbs)
  
  Notes<BR />
• Input and output voltages refer to 1 kHz sine-wave test signal.
• Input voltages refer to 100 Watts output into 8 ohms.
• Piezo input sensitivities refer to 500 pF source capacitance and are given
• as open-loop source voltages.
• Output voltages refer to 50 mV at channel 1, line input. Impedance
• values for inputs and outputs are inner impedances (not source or load
• impedances - except for power.
• Noise measured at line output with filter 22-22.000Hz, Gain at max. position, pad off, EQ flat, all returns at min. position, input shorted, Master position refer to 100Watts output into 8 Ohm ( 1.2V at sub bass )
• Specifications and appearance subject to change without notice.

All you need in acoustic amplification and more! Order today.

The best has just gotten better.

The AER AcousticCube 3 Guitar Amp is an amazing feat in a small box like this. For more than 10 years this little giant has set standards and AER have done their best to push the limits further and further.

In its 3rd generation now, AER have implemented advanced dynamic control technology and have extended the dynamic range substantially. The two-way speaker system is an incredible improvement. It allows a much clearer and defined bass response and much lighter, more vivid reproduction of the complete range up to finest texture.

The Cube 3 amplifier is a full two-channel version now allowing identical features on both channels. It needed a face-lift for more operational clarity and to allow additional important controls on the front panel.

In essence AER has combined all the suggestions of Cube enthusiasts over the years with all their knowledge and experience without compromise and are now pleased with version 3's improvements to sound, dynamics, presence, and natural sound. Not to mention the features.

Tone Control:
The AcoustiCube 3 amp's three band tone controls are active and constructed to fulfill the specific requirements of both acoustic instruments and other sources. The color switches activate a mid-cut-treble-boost-filter that especially suits finger picking.

AER DSP 4 Digital Effect internal effect The AcoustiCube 3 has a built-in (internal) digital 32bit AER-effect processor. With the effect program endless-encoder you can choose between 100 (0-99) effect programs (factory settings: chapter 6). The number of the chosen effect can be seen in the two-digit display. The direction in which you turn the control does not matter.

You can connect your AER AcoustiCube with a computer via USB-cable, change the effect program parameters that suit your requirements, make combinations and store them under a new name. Two of the 100 effects can be stored and recalled via the AER footswitch. You can select an effect and by pressing the program-encoder on your AcoustiCube amp, this effect is stored.

New for version 3
• Two identical channels • Bass-reflex cabinet separated from the electronics • Two-way speaker system • 44V dynamic reserve in pre-amp EQ range • Separately adjustable and stabilized power source • Pre-amp matrix: three pre-amps, two phantom power, combi-modus • 32bit digital processor with USB-interface for parameter adjustment manipulation • Aux in, mute, insert

AER AcoustiCube 3 Guitar Combo Amp - Scratch 'n' Dent Specifications:

• Channel 2 same as channel 1
• Input 2: input channel 2
• Input 1: input channel 1
  
  LED chain: chain display for status and pre-amp choice
• Clip: overload indicator
• Mute: channel mute indicator
• Piezo: sources with piezo level, instruments with passive pick-up systems only
• Line: sources with line-level, instruments with active pre-amps and/or magnetic pickups
• 9V: phantom supply for line function is switched on when mode switch is pressed in line modus for three seconds
• Mic: sources with mic-level, balanced and unbalanced
• 48V: phantom supply 48V for mic function is switched on when mode switch is pressed in mic modus for three seconds
• E/P: Electret-microphone/Piezo pick-up
  
  Mode: tip switch for input mode section
• Pad: switch to adjust input sensitivity
• Gain: input level control
• Color: switch to activate mid-range contour filter
• Mute: mute control switch
• Bass: tone control for bass
• Middle: tone control for mid-range
• Treble: tone control for treble
• Program: continuous program-selector encoder with memory-function, internal effect
  
  Channel pan: effect panorama control - left: channel 1, mid: channel 1+2, right: channel 2
• Return: effect return control, adds internal effect
• Power: power indicator
• Pre master: level control for L-out, R-out and record ch1/ch 2 out
• Master: level control for the overall
  
  Rear Module (from left to right)
• Tuner: tuner output without tone control and effects
• Phones: stereo-headphone output including effects and aux-in signal. Use stereo plugs only!
• Sub: 6.3 mm jack as an output to drive an active sub-bass, AER SUB 12/400A
• Line: output for active loudspeaker box including tone control and effect, dependent on the master-control
• L-out: line-out, adjustable via pre-master with tone control, effect, stereo reproduction of external effect and aux-in
• R-out: line-out, adjustable via pre master with tone control, effect, stereo reproduction of external effect and aux-in
• Record ch1/ch2: stereo jack, tip: channel 1 and ring: channel 2, including tone control, without effect, pre-master
• Master insert: effect loop: input->return = ring / output -> send = tip, for serial effect looping or connection of AER amps via link-function (chapter10)
• Aux in: cinch-input L/R for e.g. CD player
• Aux-return: aux-return-control, mixes the aux-in signal to the overall signal
• Presence: presence-control, treble attenuation from 4kHz
• DI-level DI-level-control, controls the level of the DI-signal
• DI pre/post: DI-signal pre or post effect
• DI balanced: XLR-output, pre-master, no tone control
• Notch: notch-filter, center-frequency 120Hz, for attenuation of feedback or instrument interference
• USB: USB-port, connection of the AER DSPs with your computer for changing the effect parameters
• Master ctrl.: Multipin-DIN-jack for connecting the AER footswitch
• Effect 2 (external effect): send output with EQ for external effect unit
• Pan: effect channel control for external effect (left: channel 1, middle: channel 1 + 2, right: channel 2), internal effect
• Return: stereo jack for external effect unit or other signal-source
• Ser/par: switch for serial or parallel effect mode
• mic input: balanced and unbalanced, parallel with front panel input 2
  
  Back Panel (left to right)
• Power: power jack with fuse holder
• Voltage selector: voltage selector switch 115/230V
• Ground lift: ground lift switch that disconnects signal ground from protective conductor
• Speaker out: socket for passive bass box, e.g. AER SUB 12/250P
  
  Channel 1/2
• Piezo: balanced/unbalanced
• Sensitivity: -26dBV, -11dBV with
• Pad switch: on
• Noise: < -82dBV
• Line/EP: unbalanced
• Sensitivity: -28dBV, -13dBV with
• Pad switch: on, Switchable 9V phantom power on ring ( 2x100mA max)
• Noise < -80dBV
• Mic balanced
• Sensitivity -38dBV
• Noise: < -80dBV, Switchable 48V phantom power
• Aux in: L/R Cinch, unbalanced , 2x560mV >5 k ohms(impedance depending on "return" setting),
• Effect 2: return Jack, stereo, unbalanced, 2x 750 mV, >5 k ohms(impedance depending on "return" setting, left channel on internal speaker
• Clip indicator: Headroom 6 dB
  
  OUTPUT
• Tuner jack: 1.3V, 100 ohms
• Phones jack: stereo, max. 1.7 V RMS, max. 2x 100 mW into 32 ohms, for headphones only. Do not connect to other devices, do not use mono plugs.
• DI out XLR: adjustable 60-240 mV, 100 ohms, balanced, pre/post effect
• Sub bass jack: max. 1.4V (post master), 100 ohms, with left channel of effects Activates 200 Hz active crossover for built-in speaker
• Line out jack: max. 1.4V (post master), 100 ohms, with right channel of effects
• L out, R out jack: adjustable 0 1.4 V, 100 ohms,
  
  Stereo effects, balanced
• Record out: channel 1/2, Jack, 1.2V, 100 ohms
• Effect 2 send jack: max. 1.2V depending on "pan" setting, 100 ohms
  
  Speaker out
• Subwoofer output: jack, max. 120 W into 8 ohms, Use only 8 ohms passive subwoofer, with built-in 200 Hz crossover (AER Sub10/200P). Not suitable for full-range external speaker.
  
  Master control: 8-pin DIN socket , for Acousticube IIa footswitch, features:
• Ch. 1/2: volume control / mute (max 40dB gain reduction)
• Effects memory: 1/2 toggle
• Effect 1/2: on/off
  
  EQ Channel 1
  
• Bass: ñ10 dB / 60 Hz
• Middle: ñ6 dB / 600 Hz
• Treble: ñ13 dB / 13 kHz
• Color: 3 dB bei 100 Hz, +6 dB bei 10 kHz
  
  Channel 2
  
• Bass: ñ12 dB / 100 Hz
• Middle: ñ12 dB / 1 kHz
• Treble ñ12 dB / 10 kHz
• Presence filter: +0/ 16 dB / 10 kHz
• Notch filter: -24 dB at 120 Hz BW-12 dB= 36 Hz
• Analog signal processing: AER low-distortion limiter, subsonic filter
• Built-in effects: AER 32-bit digital effects processor, 100 presets
• Power amp: 120 W sine-wave into 8 ohms, discrete bipolar transistor design
• Limiter: threshold 100 W
• Speaker system: 2-way speaker
• 8" (20 cm): low-midrange Hexacone driver, Neodym magnet
• 1" (25 mm): dome tweeter Neodym magnet
• AC power: AC 115/230 V (switchable), 50 60 Hz, max. 200 W
• Mains fuse: slow 3.15 A, 5x20 mm
• Cabinet: 15 mm (0.59") birch plywood, Finish water based acrylic, black spatter finish
• Dimensions 330 x 330 x 265 mm (13"x13"x10.4") W x H x D
• Weight 13.00 kg (28,66 lbs)
  
  Notes<BR />
• Input and output voltages refer to 1 kHz sine-wave test signal.
• Input voltages refer to 100 Watts output into 8 ohms.
• Piezo input sensitivities refer to 500 pF source capacitance and are given
• as open-loop source voltages.
• Output voltages refer to 50 mV at channel 1, line input. Impedance
• values for inputs and outputs are inner impedances (not source or load
• impedances - except for power.
• Noise measured at line output with filter 22-22.000Hz, Gain at max. position, pad off, EQ flat, all returns at min. position, input shorted, Master position refer to 100Watts output into 8 Ohm ( 1.2V at sub bass )
• Specifications and appearance subject to change without notice.

All you need in acoustic amplification and more! Order today.

Small, smart, and surprisingly loud.

The AER Alpha is a compact combo amp for acoustic instruments. It has one channel with 2 individual inputs that allow parallel use of instrument and microphone, even though the instrument is the main focus. Inputs each have their own gain knob. Birch plywood cabinet provides great tone projection and is road tough. Dynamic controlled 40 Watts RMS and the 8" twin-cone speaker system give perfect performance at all sound pressure levels. On board reverb, external effects loop and headphone out.

The Alpha amplifier defines the starting point of serious acoustic amplification at AER. Based on the success and the experience with the Compact 60 they have developed an even smaller, lightweight model that has no difficulties living up to the rigors of the road. Amazingly reduced, without losing what is essential for superb performance - the Alpha is a full size member of the AER product family. Open sounding and quick in response, this guitar amp masters different ranges and is not afraid of bigger instruments.

Effects
The AER Alpha has an integrated (internal) digital reverb effect on board. The return control determines the intensity of the effect (as far to the left as possible means no effect). Furthermore, a supplementary effect device can be connected (external effect). For this purpose, use the sockets send and return at the rear of Alpha to connect the external device (send to the input, return from the output of the external effect). The intensity will then be set by the controls of external effect device. A standard double foot switch can be connected to the footswitch socket on the rear of the amp with a stereo cable. This switch can be used to turn the internal and external effects on and off.

AER Alpha 40W 2x8 Acoustic Guitar Combo Amp Specifications:

• Input one: XLR Combi
• Line: unbalanced, 1 MEG, mic: balanced, 600 Ohm, Voice filter 300 Hz
• Input two: line: unbalanced, 2.2 MEG, pad: -10dBV, eff.return: -10dBV/10k
• Outputs: line: 0dBV, DI: -20dBV, send: -10dBV
• Foot switch tip: built in effect, ring: external effect, sleeve: ground
• EQ: bass: ñ8 dB/100 Hz, middle: ñ3 dB/550 Hz, treble: ñ11 dB/ 10 kHz
• Analog signal processor: limiter, subsonic filter and enhancer
• Effect: digital reverb
• power amp: power consumption - 220-240 V / 50-60Hz / 55 VA (110V / 50-60Hz)
• Rating: 40 Watt / 4 ohm RMS
• Mains Fuse: 1 A slow
• Speaker: 8" twin-cone speaker-system (96 dB 1w/1m, freq. range 60Hz-18kHz)
• Cabinet: 0.47" (12 mm) birch plywood
• Dimension: 10.24' (260 mm) high, 10.43' (265 mm) wide, 9.25' (235 mm) deep
• Finish: water based acrylic, black spatter finish
• Weight: 14.33 (6.5 kg)
• *** 0dB/V ~ 1V
• *** specifications and appearance subject to change without notice

AER Alpha 40W 2x8 Acoustic Guitar Combo Amp Features:

• Front panel
• Combination XLR male and 1/4" inch input with individual gain knob
• Line/mic preamp mode selector switch line: sources with line level, instruments with active preamplifiers and magnetic sound pick-ups, mic: symmetrical microphone input with 24 V phantom source
• 1/4" input 2 line level with individual gain knob
• Pad switch to adjust input sensitivity up position: standard line level down position: reduction by 10 db/V
• LED Clip overload indicator for both channels
• Color mid-range contour filter, only active for input 2
• Bass, middle, treble, effect return and master levels for both inputs
• On LED
  
  Outputs
• Phones: headphone output
• Line-out: preamplifier output post-master control
• DI-out: XLR output pre master control effect loop mono, parallel send: output, to input of an external device
• Return: input, from output of an external device or from another signal source, e.g. CD player
• Footswitch: connection to a double foot switch-to-switch internal and external effect on and off
• Power: combined mains switch with a mains socket and a fuse holder (1 a slow blow)
• Accessory: 3/8" microphone stand adapter
• Carrying bag

Size really doesn't matter when you build it right. Order today.

The range and power to amplify acoustic guitars and basses right.

The Basic Performer Acoustic Guitar Amp with its specially designed construction and its 4 x 60 watt power is an ideal tool for acoustic and electric bass-amplification. More than that, it suits very well for all instruments with strength in the low register, e.g.: cello, harp etc. Apart from its two channels with three-band tone- control and mute-switch it offers a compressor and a notch filter.

Long scale lengths, huge body sizes, and resonance problems are only some trouble zones of the acoustic instrument. The small twin-cone system is perfect - it is fast, provides a superior coverage for the critical mid-range and has got enough substance in the bass range. The AER Basic Performer has four 8"-twin-cone speakers which are individually powered by four 60W power amps provide for the required surface area and the necessary sound pressure level.

The special AER band-pass / bass-reflex cabinet design supports the reproduction of even the lowest frequencies with definition. Hi-end preamps, proper filters and additional professional sound design make the Basic Performer amplifier a multitalented all-round solution.

The sound characteristics of this AER amp are full range, open and light - breathing as well as grumbling and surprisingly appropriate for far more instruments than the bass-related instruments such as harp, cello, accordion or even try a jazz guitar.

AER Basic Performer Acoustic Guitar Combo Amp Specifications:

• Inputs: Ch 1:
• Line: unbalanced, 1 MEG
• Mic: balanced, 600 Ohm
• Ch 2:
• Line: unbalanced, 1 MEG
• Mic: balanced, 600 Ohm
• Eff.Return: -10dBV/10k
• Tape-In: -10dBV/10k
• Outputs: Tuner: -10dBV
• Line: 0dBV
• DI: -20dBV
• Send: -10dBV
• Phones: stereo, 300 mV / 32 Oh
  
  Footswitch Effect External effect = Tip, ground = Sleeve
• Footswitch Mute: Ch 1 = Tip, Ch 2 = Ring
• Footswitch Master: Solo = Tip, Ensemble = Ring
• EQ: Channel 1:
• Bass: ñ18 dB/ 100 Hz
• Middle: ñ13 dB/ 550 Hz
• Treble: ñ11 dB/ 10 kHz
• Channel 2:
• Bass: ñ10 dB/ 80 Hz
• Middle: ñ10 dB/ 200 Hz - 1kHz
• Treble: ñ10 dB/ 10 kHz
• Colour: - 3 dBV/ 700 Hz and + 10 dBV/ 10kHz
  
  Analog Signal
• Processor: Limiter, Subsonic Filter und
• Enhancer
• Power Amp: Powerconsumption: 220-240 V / 50-60Hz / 300 VA (110V / 50-60Hz)
• Rating: 200 Watt / 4 ohm rms
• Mains Fuse: 3.1 A slow
• Speaker: 4 x 8' twin-cone speaker system (98 dB 1w/1m, freq. range
• 60 Hz - 18 kHz)
• Cabinet: 0.59' 3(15 mm) birch plywood
• Dimension: 20.87' (530 mm) high, 14.17' (360 mm) wide, 15.75' (400 mm) deep
• Finish: waterbased acrylic, black spatter finish
• Weight: 50.72 (23 kg)
• 0dB/V ~ 1V
• Specifications and appearance subject to change without notice

AER Basic Performer Acoustic Guitar Combo Amp Features:

• Channels 1 + 2:
• Input: XLR-combination-socket with a socket for a 6.3 mm jack-plug and an XLR-mle-socket
• Channel Mute: switch to mute the channel
• Line/Mic: switch to adjust input sensitivity
• Line: sources with line level, instruments with active preamplifiers and magnetic sound pick-ups
• Mic: symmetrical microphone input with 24 V phantom power
• Clip: overload indicator
• Gain: input level control
• Bass: tone control for bass
• Middle: tone control for mid-range
• Treble: tone control for treble
• Input: socket for a 6.3 mm jack plug
• Channel Mute: switch to mute the channel
• Pad: damp-switch
• Clip: overload indicator
• Gain: input level control
• Color: mid-range contour filter, switchable
• Contour: control for mixing-in internally generated harmonics
• Bass: tone control for bass
• Middle: tone control for mid-range
• Frequency: mid-range frequency selection
• Treble: tone control for treble
  
  Front, bottom (from left to right):
  
  DI Pre/Post: DI-switch pre/post EQ
• 24V Phantom: 24 volt-phantom-power on/off
• 9V Phantom: 9 volt-phantom-power on/off
• Compressor: switches compressor on/off
• Threshold: control for the operational level
• Active: compressor operational
• Ratio: control for the compression-ratio
• ñ1dB: indicates the reduction of amplification in dB
• ñ3dB: indicates the reduction of amplification in dB
• ñ6dB: indicates the reduction of amplification in dB
• ñ12dB: indicates the reduction of amplification in dB
  
  Notch Filter: filter on/off
• Frequency: level-control for the frequency-selection
• Aux Return: level-control for aux return
• Effect Return: level-control for effect return
• Power: power indicator lamp
• Master: Solo - level-control for the overall volume, solo-setting, Ensemble - level-control for the overall volume, ensemble-setting
  
  Rear:
  
  Tape In: stereo input for CD and tape
• Phones: headphone output, stereo
• Tuner: output for a tuner
• Insert: insert-point, Tip = Send, Ring = Return, Line Out line-output
• DI Out: XLR-output pre-master
• Send: output for an external effect device
• Return: input for an external effect device or other signal, for example CD-player
• FS-Effect: footswitch effect on/off
• FS-Master: socket for a stereo footswitch, master-selection solo/ensemble
• FS-Mute: socket for a stereo footswitch to mute the channels
• Voltage Select: voltage selection switch
• Power: power supply with line-socket and fuse-holder

Get the right tool for the job and you'll never be sorry. Call us or click today to order.

A work horse combo for the touring professional.

The AER Compact 60 has two channels that make it possible to operate a microphone and an instrument independently of each other. The dynamically controlled power amplifier and the broad-spectrum loudspeaker system guarantee distortion-free reproduction even at high volumes.

The Compact 60 guitar amp was developed after and based on the Acousticube, and it helped substantially to break out of the boutique corner. AER were able to prove to a bigger and increasingly more interested public that an all-round, small, powerful and yet simple complete solution for stage, studio and home use does exist and that it works up to the highest demands and standards.

Known as Bingo or Compact 60, it has found many friends around the world with its size - smiled at in the beginning - being its second strongest side. Tried out during live performance it has become standard equipment of musicians who value sound, simplicity and independence.

This system, with its 8"-twin-cone speaker-system, 60 watts of power and fully developed dynamic control within the models small dimensions has not only found much appreciation but has also become the basis for a whole line of step by step, developed and refined AER acoustic amplification systems.

Level control:
You can use the High/Low switch and the Gain control to adjust the various pick-up systems and signal sources to AER Compact 60 amp. The clip indicator shows that the input signal is too high.

Tone controls:
The three and two band tone controls of your Compact 60 are designed to fulfill the special requirements of acoustic instruments and the general demands of other sources. The Color switch in Channel 1 activates a mid-cut treble-boost filter that is particularly appropriate for fingerstyle techniques.

Effects:
The Compact 60 has an integrated (internal) digital effect permitting you to choose between four effects by using the select push button. The select button allows you to choose between the four build-in-effects. They are indicated by the LEDs between the return and master controls. Pos. 1 is a warm hall reverb, pos. 2 is a bright hall reverb, pos. 3 is a chorus with reverb and pos. 4 is a flanger.

The Return knob determines the intensity of the effect (as far to the left as possible means no effect). Furthermore, a supplementary effect device can be connected (external effect). For this purpose, use the sockets at the rear of Compact 60 Send and Return (send to the input, return from the output of the external effect). The intensity will then be set by the external effect device. Using the Effect-Pan control, you can mix continuously variable effect portions into the channels.

AER Compact 60 60W 1x8 Acoustic Guitar Combo Amp Specifications:

• Inputs Ch1: Line: unbalanced., 2.2 MEG
• High/Low -10 dbV
• Ch2: Line: unbalanced., 1MEG _ Mic: balanced., 600 Ohm
• Eff. Return: -10dBV/10k
• Outputs: Tuner: -10dBV
• Line: 0dBV
• DI: -20dBV
• Send: -10dbV
• Foot switch Tip: built in effect
• Ring: external effect
• Sleeve: ground
• EQ:
• Ch1: Bass: +- 8 dB/ 100 Hz
• Middle: +- 3 dB/ 550 Hz
• Treble: +- 11 dB/ 10 kHz
• Ch2: Bass: +- 8 dB/ 100 Hz
• Treble: +- 11 dB/ 10 kHz
• Analog Signal
• Processor: Limiter, Subsonic Filter and Enhancer
• Effect: Four build-in effects, hall, bright hall, reverb/chorus, flanger
• Power Amp: Power consumption: 220-240 V / 50-60Hz / 70 VA (110V / 50-60Hz)
• Rating: 60 Watt / 4 ohm RMS
• Mains Fuse: 1A slow
• Speaker: 8" twin-cone speaker-system (96 dB 1w/1m, freq. range 60Hz-18kHz )
• Cabinet: 0.59" 3(15 mm) birch plywood
• Dimension: 10.24" 3(260 mm) high, 13.00"
• 3(330 mm) wide, 19.06" 3(230 mm) deep
• Finish: water based acrylic, black spatter finish
• Weight: 18.74 (8.5 kg)
• 0dB/V ~ 1V
• specifications and appearance subject to change without notice

AER Compact 60 60W 1x8 Acoustic Guitar Combo Amp Features:

• Front (from left to right):
• Channel 1:
• Input socket for a 6.3 mm jack plug
• High/Low switch to adjust input sensitivity High impedance only instruments with a piezoelectric pick-up, Low for instruments with active preamplifiers and magnetic sound pick-ups
• Clip overload indicator
• Gain input level control
• Color mid-range contour filter
• Bass tone control for bass
• Middle tone control for mid-range
• Treble tone control for treble
• Input XLR combination with a socket for a 6.3 mm jack plug and XLR male socket
• Line/Mic switch to adjust input sensitivity
• Line sources with line level, instruments with active preamplifiers and magnetic
• sound pick-ups, Mic: symmetrical microphone input with 30V phantom source
• Clip overload indicator
• Gain input level control
• Bass tone control for bass
• Treble tone control for treble
• Eff. Pan panorama control to distribute the effects between the channels
• Select push button for the selection of four effects, indicated by the LEDs between return and master (pos.1 warm hall, pos. 2 bright hall reverb, pos. 3 chorus with reverb, pos. 4 flanger)
• Return level control for the internal effect
• Power indicator lamp
• Master level control for the overall volume
  
  Rear (from left to right):
• Phones headphone output
• Tuner output for a tuner after the master control
• Line out preamplifier output after the master control
• DI-out XLR output before the master control
• Send output for an external effect device
• Return input for an external effect device or another signal source, for example CD player
• F/S connection for a double foot switch with which the effects can be switched on and off (See 4. Summary of Operations).
• Power combined mains switch with a mains socket and a fuse holder (1 A slowblow)

Pack it up, pack it in, put it in the cart and get ready to roll.

A combo amp ideally suited to classical instruments and styles.

The Compact Classic Pro amplifier is for classical players and their instruments. Based on the Compact 60 power amp, the Compact Classic Pro benefits from an improved 2-way-speaker system, a more complex 3-band EQ with parametric bass and the use of the AER 32-bit effects-processor with carefully designed presets for classical instruments.

All features of the AER Compact Classic Pro combine nicely to accurately reproduce the finer tonal texture of a classical instrument throughout the full audio band, enhance the low frequency response without increasing the feedback risk and create beautiful ambiance that supports the tone.

Having an acoustic guitar amp with one simple single setting is nice, but it really doesn't work, especially for more demanding classical instruments. For the right sound, it takes a little work, learning how to dial it in. AER believes that giving you a wide variety of settings will pay off in the end.

One channel - two individual inputs allow parallel use with any kind of pickup and microphone and allow two sound sources with the instrument. Dynamic controlled 60-Watts RMS and the 8" twin-cone tweeter speaker system give perfect performance at all sound pressure levels.

AER Compact Classic Pro Acoustic Guitar Combo Amp Specifications:

• Input 2: socket for a 6.3 mm jack plug, line level
• Clip: overload indicator, red overload
• Gain: input level control
• Piezo / line: input stage selector
• Up position: piezo mode
• Down position: line mode
• Mute: mute switch with indicator aside, yellow mute active
• EQ: both inputs at the time. bass parametric tone control for bass, amplitude. Freq: frequency selector, 60 400 Hz
• Bandwidth: filter characteristics mute of the parametric bass EQ
• U - up position broad
• V - down pos. - narrow
• Middle: tone control for mid-range
• Treble: tone control for treble
• Effect: pan - pans build in effect between input 1 and input 2. return effect Level control. program effect preset selector, 16 reverb/ambience presets
  
  Power: power indicator lamp
• Master: level control for the overall volume
  
  Rear
• Inputs: aux in: RCA connectors, non adjustable
• Return: effect return, mono
• Insert: insert return, stereo ring
  
  Outputs
• Phones: headphone output
• Tuner: tuner output
• Insert: insert send, stereo tip
• LIneout: preamplifier output post-master control
• Left out: master out
• Right out: master out
• Send: effect send, mono
  
  DI-out: XLR output, pre master control
• DI level: DI level adjustment
• DI pre/post effect: DI mode switch pre or post effect
• Effect loop: mono, parallel
• Send: output, to input of an external device
• Return: input, from output of an external device or from another signal source, e.g. CD player
• FS effect: stereo jack socket for double foot switch to turn internal and External effect on and off
• FS mute: stereo jack socket for double foot switch to mute input 1 and 2
  
  Presence: presence control
• Dip switch
• Power: combined mains switch with a mains socket and a fuse holder (1 A slow Blow)
• Accessory: 3/8" microphone stand adapter, carrying bag

Get the right tool for the job and you'll never regret it. Call us or click today.

High-quality acoustic sound in an amp you can play anywhere.

The Compact Mobile acoustic guitar amp was developed to give musicians a system for acoustic instruments which provides AER sound and quality everywhere, independent of AC power. Based on the Compact 60, and identical in sound, but with adapted technology and slightly changed dimensions, you can play without AC power for three to four hours whether you chose to play in the old town or on a glacier. The sound is clear and omnipresent.

Get used to people turning their heads. In case of insufficient battery power, the Compact Mobile's intelligent power control gives a warning and thus saves you from lack of power during performance. It also prevents the batteries from being completely exhausted. Besides the features of the Compact 60, the Compact Mobile has got an AUX input that can be used to mix a battery-powered CD player to the sound.

The AER Compact Mobile amp has two channels that make it possible to operate a microphone and a musical instrument independently of each other. The dynamically controlled power amplifier and the broad-spectrum loudspeaker system guarantee distortion-free reproduction even at high volumes.

The Compact Mobile was developed after and was also based on the Acousticube, and it helped substantially to break out of the boutique corner. AER was able to prove to a bigger and increasingly more interested public that an all-round, small, powerful and yet simple complete amplification solution for stage, studio and home use does exist and that it works up to the highest demands and standards.

It has found many friends around the world with its size - smiled at in the beginning - being its second strongest side. Tried out during live performance it has become standard equipment of musicians who value sound, simplicity and independence.

This system, with its 8"-twin-cone speaker-system, 60 watts of power and fully developed dynamic control within the models small dimensions has not only found much appreciation but has also become the basis for a whole line of step by step, developed and refined AER acoustic systems.

Level control:
You can use the High/Low switch and the Gain control to adjust the various pick-up systems and signal sources to Compact Mobile. The clip indicator shows that the input signal is too high.

Tone controls:
The three and two band tone controls of your Compact Mobile amp are designed to fulfill the special requirements of acoustic instruments and the general demands of other sources. The Color switch in Channel 1 activates a mid-cut treble-boost filter that is particularly appropriate for fingerstyle techniques.

Effects:
The AER Compact Mobile has an integrated (internal) digital effect permitting you to choose between four effects by using the select push button. The select button allows you to choose between the four build-in-effects. They are indicated by the LEDs between the return and master controls. Pos. 1 is a warm hall reverb, pos. 2 is a bright hall reverb, pos. 3 is a chorus with reverb and pos. 4 is a flanger.

The Return knob determines the intensity of the effect (as far to the left as possible means no effect). Furthermore, a supplementary effect device can be connected (external effect). For this purpose, use the sockets at the rear of Compact Mobile Send and Return (send to the input, return from the output of the external effect). The intensity will then be set by the external effect device. Using the Effect-Pan control, you can mix continuously variable effect portions into the channels.

AER Compact Mobile CPM-AKKU Acoustic Guitar Combo Amp Specifications:

• Inputs Ch1: Line: unbalanced., 2.2 MEG
• High/Low -10 dbV
• Ch2: Line: unbalanced., 1MEG _ Mic: balanced., 600 Ohm
• Eff. Return: -10dBV/10k
• Outputs: Tuner: -10dBV
• Line: 0dBV
• DI: -20dBV
• Send: -10dbV
• AUX CD input
• Foot switch Tip: built in effect
• Ring: external effect
• Sleeve: ground
• EQ:
• Ch1: Bass: +- 8 dB/ 100 Hz
• Middle: +- 3 dB/ 550 Hz
• Treble: +- 11 dB/ 10 kHz
• Ch2: Bass: +- 8 dB/ 100 Hz
• Treble: +- 11 dB/ 10 kHz
• Analog Signal
• Processor: Limiter, Subsonic Filter and Enhancer
• Effect: Four build-in effects, hall, bright hall, reverb/chorus, flanger
• Power Amp: Power consumption: 220-240 V / 50-60Hz / 70 VA (110V / 50-60Hz)
• Rating: 60 Watt / 4 ohm RMS
• Mains Fuse: 1A slow
• Speaker: 8" twin-cone speaker-system (96 dB 1w/1m, freq. range 60Hz-18kHz )
• Cabinet: 0.59" 3(15 mm) birch plywood
• Dimension: 10.24" 3(260 mm) high, 13.00"
• 3(330 mm) wide, 19.06" 3(230 mm) deep
• Finish: water based acrylic, black spatter finish
• Weight: 18.74 (8.5 kg)
• 0dB/V ~ 1V
• specifications and appearance subject to change without notice

AER Compact Mobile CPM-AKKU Acoustic Guitar Combo Amp Features:

• Channel 1:
• Input socket for a 6.3 mm jack plug
• High/Low switch to adjust input sensitivity High impedance only instruments with a piezoelectric pickup, Low for instruments with active preamplifiers and magnetic sound pickups
• Clip overload indicator
• Gain input level control
• Color mid-range contour filter
• Bass tone control for bass
• Middle tone control for mid-range
• Treble tone control for treble
• Input XLR combination with a socket for a 6.3 mm jack plug and XLR male socket
• Line/Mic switch to adjust input sensitivity
• Line sources with line level, instruments with active preamplifiers and magnetic
• sound pickups, Mic: symmetrical microphone input with 30V phantom source
• Clip overload indicator
• Gain input level control
• Bass tone control for bass
• Treble tone control for treble
• Eff. Pan panorama control to distribute the effects between the channels
• Select push button for the selection of four effects, indicated by the LEDs between return and master (pos.1 warm hall, pos. 2 bright hall reverb, pos. 3 chorus with reverb, pos. 4 flanger)
• Return level control for the internal effect
• Power indicator lamp
• Master level control for the overall volume
• AUX input for CD player, etc.
  
  Rear (from left to right):
• Phones headphone output
• Tuner output for a tuner after the master control
• Line out preamplifier output after the master control
• DI-out XLR output before the master control
• Send output for an external effect device
• Return input for an external effect device or another signal source, for example CD player
• F/S connection for a double foot switch with which the effects can be switched on and off (See 4. Summary of Operations).
• Power combined mains switch with a mains socket and a fuse holder (1 A slowblow)

Pack it up, pack it in, put it in the cart and get ready to roll.