Alchemist spins the visions of discerning guitarists into gold.

The Bogner Alchemist 40W/20W Tube Guitar Amp Head boasts sparkling, articulate cleans, touch-sensitive leads and a bright and colorful crunch. Bogner Alchemist amplifiers offer you a modern take on vintage tube amp design. The Bogner Alchemist amp head owes its remarkable tonality to a 6L6 class-AB power section, and a five-12AX7 preamp. Its timeless appeal, though, comes from modern sonic ingenuity.

Bogner Alchemist amps have a 2-channel design. Each channel has its own voice and identity. Beginning clean and fast, featuring an open top-end and tight bottom-end, Channel 1 opens gradually to present simmering blues tones that churn like spirits in a cauldron. Advancing toward saturation, Crunch mode turns up the heat adding the perfect touch of nastiness with added pick response and increased tonal complexity. Channel 2, achieving critical mass, invokes the famous white-hot Bogner gain—creamy, modern and screaming with sustain—offering everything from Brit rock right through to modern metal. Plus, with variable Bright settings, each channel can be customized to match the tone of your guitar and rig.

The Alchemist tube amp head's power section is selectable from 40 to 20 watts. When switched to 20W, Alchemist undergoes a complete sonic metamorphosis, changing its harmonic complexity and feel to conjure the essence of the legendary Brown sound.

Reverb and Delay, in variable styles and levels, run in parallel separate from the original signal. The result is a rich, living and breathing, fully realized resonance capable of producing a complete tonal landscape.

Bogner includes a 4-button footswitch with the Alchemist 40w tube amp head.

Bogner Alchemist Series Tube Guitar Amp Head Features:

• 6L6 class-AB power section and five-12AX7 preamp; selectable power section (40 or 20 watts)
• Channel 1 (gold): Gain, Treble, Mid, Bass, Volume, Crunch mode, variable Bright, Deep switch; Channel 2 (mercury): Gain, Treble, Mid, Bass, Volume, variable Bright, Mid Shift; Shared: in parallel, Reverb Type, Reverb Level, Delay Type, Delay Level, Delay Repeats (Feedback), Tap Tempo
• Included 4-button footswitch controls Channel Select, Boost, Delay and Reverb
• Eye-catching retro-modern fit-and-finish

Get the right chemistry on stage. Call or click now to order.

A front end that rivals the most respected hi-gain amps!

This channel-switching amp incorporates a powerful 30W EL84 output section with a super-modified hi-gain front end. Its voicing is that of a hybrid AC30/Plexi with a super fluid hi-gain preamp circuit. The Super Drive 30 delivers over-the-top gain with such clarity and articulation that pick attack is audible in every note played. 30W class AB, 4 EL84 power tubes, 3 12AX7 preamp tubes, 5U4 rectifier, custom wound transformers. Controls include Treble, Mid, Bass, Drive, and Master Volume. Other features include Effects Loop, Slave Out, Multiple Speaker Outs with impedance selector switch, and the Lead Link Cabinet Switching system for routing signals to extension speakers. 30 lbs.

Save BIG when you buy today!

Discover the magic tone of Budda's ultimate Hi-Gain Amp.

The Superdrive 45 represents years of research culminating in the design of the ultimate KT66 hi gain amp. The bite and complex overtones of Budda's KT66 circuit puts this amp in the realm of a newly discovered tone. The upper mid range bite combined with the tube rectifier sag makes for a very expressive amplifier, super sensitive to touch and pick attack. The bass response is earth shattering and sheer volume will have all the guitar players sniffing around your rig.

Budda Superdrive 45 Series II Amp Head Specifications:

• Dimensions:
• 30" x 14.5" x 14.5"
• 48 lbs
  
  45 watts
  
  

Budda Superdrive 45 Series II Amp Head Features:

• 2 KT66 Power Tubes
• Treble, Mid, and Bass controls
• Rhythm Volume, Master Volume
• Pull Bright on Rhythm Volume
• Drive Control
• 2 Channels, Rhythm and Hi Gain
• Selectable Tube and Solid State Rectifier Switch
• Effects Loop
• Slave Out
• Pull/Modern Mid Eq function
• Custom Wound Transformer with 4-8 OHM Switch
• Multiple Speaker Outs
• 4-8-16 Ohm Selector Switch
  
  Dimensions:
• 30" x 14.5" x 14.5"
• 48 lbs
  
  45 watts
  
  

Save BIG when you buy today!

An amp to more than please the serious tone freak.

With an 80W, 4 - 6L6 power section and a custom-wound transformer, the Superdrive 80 is tight and beefy with plenty of headroom. It gets the tone of the gods and exceptional pick dynamics even at conversation level. In the preamp section, 12AX7s and a 5U4 rectifier tube deliver a tight and articulate clean channel and a lusciously creamy overdrive channel. Controls for treble, mid, and bass EQ; rhythm volume; hi-gain drive; and master volume. The transformer can be switched from 4, eight, and sixteen ohms to match your speaker setup. Effects loop and a slave out connection are provided.

Budda Superdrive 80 Series II Head Features:

• 80W of power from four 6L6s
• preamp tubes are 12AX7s
• Custom-wound transformer
• Two channels (clean and overdrive)
• Treble, mid, and bass EQ knobs
• Rhythm volume and hi-gain drive controls
• Master volume
• Effects loop and slave out connections
• Transformer can be switched for four, eight, and sixteen-ohm operation

Order today and do the Budda boogie!

A low wattage powerhouse!

The Superdrive Series II 18 head is designed for the clubs and project studio. This lightweight two-channel EL-84 driven amp offers sparkling rhythm complexity with super sensitive hi gain articulation. The jewel in this amp is apparent when the power section heats up and the dual 84's are being pushed to the point of no return. There something to be said about getting the power tubes to act like a preamp cranked where the sag of the circuit is creamy and the hang time on the note is forever at your fingertip. The Superdrive 18 is voiced for modern vintage styles of music.

Budda Superdrive Series II 18 Head Specifications:

• 30" x 14.5" x 14.5"
• 41 lbs
• 18 watts
• 2 EL84's and a 5U4 rectifier tube
• Treble, mid, and bass controls
• Rhythm volume, master volume
• Pull bright on rhythm volume
• Drive control
• 2 channels, rhythm and hi gain
• Effects loop
• Slave out
• Pull/modern mid function
• 12AX7 high grade preamp tubes
• Custom wound transformer with 4-8 ohm switch

Rub the belly, click the mouse or place the call. Order today.

A low wattage powerhouse!

The Superdrive Series II 18 head is designed for the clubs and project studio. This lightweight two-channel EL-84 driven amp offers sparkling rhythm complexity with super sensitive hi gain articulation. The jewel in this amp is apparent when the power section heats up and the dual 84's are being pushed to the point of no return. There something to be said about getting the power tubes to act like a preamp cranked where the sag of the circuit is creamy and the hang time on the note is forever at your fingertip. The Superdrive 18 is voiced for modern vintage styles of music.

Budda Blem Superdrive Series II 18 Head Specifications:

• 30" x 14.5" x 14.5"
• 41 lbs
• 18 watts
• 2 EL84's and a 5U4 rectifier tube
• Treble, mid, and bass controls
• Rhythm volume, master volume
• Pull bright on rhythm volume
• Drive control
• 2 channels, rhythm and hi gain
• Effects loop
• Slave out
• Pull/modern mid function
• 12AX7 high grade preamp tubes
• Custom wound transformer with 4-8 ohm switch

Rub the belly, click the mouse or place the call. Order today.

With new black and silver cosmetics matching the BV150 and BV300, the Crate Blue Voodo BV120HB is stacked with 120 Groove Tube Watts. Generating enough power to run a full stack of eight 12" speakers to their breaking point and still have room for pie, the BV120H has been designed to perform on a professional level. Each BV 120 Head uses four 6L6/5881 and four 12AX7 tubes for solid tube tone and classic breakup. Player Type: A favorite amp of professional musicians, the BV120 is respected for its ability to deliver outstanding tone, while standing up on the road. Dial in your settings, then stand back!

The supernova power of the Blue Voodoo BV120HB makes this award-winning tube amp some serious ordnance. Its sparkling clean tones, throaty rhythm contours and gain-fueled drive dramatically expand the potential of the sought-after tube sound.

Crate Blue Voodoo BV120HB Guitar Amp Head Specifications:

• Output Power Rating: BV-60H 50 watts RMS, BV-120H 120 watts RMS, @ 5% THD 8 or 16 ohm load, 120 VAC
• Gain: Channel 1 66dB, tones at "10" @ 1kHz
• Channel 2 101dB, tones @ "10" @ 1kHz
• Tone Control Range: Channel 1 Low 16dB @ 100Hz; Mid 20dB @ 300Hz; High 10dB @ 10kHz Channel 2 Low 15dB @ 100Hz; Mid 13dB @ 500Hz; High 10dB @ 10kHz; Presence 5dB @ 10kHz
• Input Impedance: 1M ohm
• Maximum Input Signal Level Accepted: 2.8V peak to peak
• Tube Types: Preamp 12AX7A (3); Power Amp BV-60H 12AX7A (1), 6L6GT/5881 (2);
• BV-120H 12AX7A (1), 6L6GT/5881 (4)
• Line Out Level: 1.2V RMS nominal
• Power Requirements: BV-60H 120VAC, 60Hz, 110VA; 100/115VAC, 50/60Hz, 110VA; 230VAC, 50/60Hz, 110VA BV-120H 120VAC, 60Hz, 180VA; 100/115VAC, 50/60Hz, 180VA; 230VAC, 50/60Hz, 180VA
• Size and Weight: 12"H x 30.25"W x 10"D, 50lbs.

Get wicked! Call or click today to order.

A tonal range from crystal clear to screaming high gain.

FlexWave120H is the perfect stage guitar stack top for the pro or semi-pro gigging musician who needs driving power, multiple channels and built-in effects. Its FlexWave™ Evolution 5 preamp uses patented Sequential Cascading Gain™ technology to pump 120W of fat, driving tone through your speaker cab. Variable 3-channel operation allows you to switch among crystal clear clean, red-hot overdrive and screaming high gain channels from the included remote. A built-in tuner ensures you're constantly in tune. With DSP effects, Channel Tracking of effects settings, and a proprietary Shape Control circuit for creating wicked custom leads, it's suited perfectly to the Crate G412A/B 4x12 cabinets.

More than 25 years of award-winning engineering prowess led Crate to develop the remarkably responsive FlexWave Evolution 5. Sequential Cascading Gain™ technology that yields rich, articulate tone that's fully customizable with onboard effects. Get everything from crystal clear cleans to white-knuckle distortion. For sweet tone and roadworthy construction, it's hard to find a better value.

Crate FlexWave Series FW120H 120W Guitar Amp Head Features:

• 3 channels
• 120 watts
• Evolution 5 preamp
• DSP effects
• Onboard tuner

Catch the wave! Order today.

A tonal range from crystal clear to screaming high gain.

FlexWave120H is the perfect stage guitar stack top for the pro or semi-pro gigging musician who needs driving power, multiple channels and built-in effects. Its FlexWave™ Evolution 5 preamp uses patented Sequential Cascading Gain™ technology to pump 120W of fat, driving tone through your speaker cab. Variable 3-channel operation allows you to switch among crystal clear clean, red-hot overdrive and screaming high gain channels from the included remote. A built-in tuner ensures you're constantly in tune. With DSP effects, Channel Tracking of effects settings, and a proprietary Shape Control circuit for creating wicked custom leads, it's suited perfectly to the Crate G412A/B 4x12 cabinets.

More than 25 years of award-winning engineering prowess led Crate to develop the remarkably responsive FlexWave Evolution 5. Sequential Cascading Gain™ technology that yields rich, articulate tone that's fully customizable with onboard effects. Get everything from crystal clear cleans to white-knuckle distortion. For sweet tone and roadworthy construction, it's hard to find a better value.

Crate FlexWave Series FW120H 120W Guitar Amp Head - Scratch 'n' Dent Features:

• 3 channels
• 120 watts
• Evolution 5 preamp
• DSP effects
• Onboard tuner

Catch the wave! Order today.

Stereo power, programmable DSP, and vintage styling.

The VTX200SH is a great sounding, stereo guitar amp head with total control over the DSP section and vintage styling. The effect section of the VTX200SH is designed to take advantage of the STEREO power section to give a huge, spacious sound to your tone. Crate has created special stereo versions of many of the most popular effects on the VTX models. These effects add drama with incredible clarity and tone.

Pumping 100 watts per channel, the VTX200SH amp head combines great sounding analog with total control over the DSP section and vintage styling. This amplifier is designed for the player who is into the vibe and styling of the V-Series, but wants up to a three channel analog amp with "tweakable" digital effects and the ability to program up to six effects in the three channels.

The DSP section includes 30 different highly-customizable effects including Reverb, Delay, Chorus, Flange, Phaser, Octave and Wah. Bypass included.

Crate VTX Series VTX200SH 2 x 100W Stereo Guitar Amp Head Specifications:

• Output Power Rating: 70W per side @5% THD, 8 ohm load
• 100W per side @5 percent THD, 4 ohm load
• Maximum Input Signal Accepted 5 volts peak-to-peak min. @ 1kHz
• Total System Gain: Ch 1 74dB, all controls @10
• Ch 2 88dB, all controls @10
• Ch 3 103dB, all controls @10
• Channel 1: Low Control 26dB range @ 70Hz
• Mid Control 10dB range @ 900Hz
• High Control 20dB range @ 10kHz
• Channel 2: Low Control 26dB range @ 70Hz
• Mid Control 10dB range @ 900Hz
• High Control 20dB range @ 10kHz
• Channel 3: Low Control 17dB range @ 100Hz
• Mid Control 16dB range @ 1kHz
• High Control 12dB range @ 7kHz
• Internal Speaker: (2) Custom Design 12", 8
• Input Impedance 470k
• Power Requirements: 120 VAC, 60Hz, 95VA
• 100/115VAC, 50/60Hz, 95VA;
• 230VAC, 50/60Hz, 95VA

Crate VTX Series VTX200SH 2 x 100W Stereo Guitar Amp Head Features:

• 3-channels
• Stereo 2 x 100W
• 30 customizable DSP effects, plus bypass.

Power and style - make it yours. Order now.

The choice of big-time bassists.

The EBS Fafner Bass Head has a tube-armed preamp and is the choice of rock professionals the world over. This good-looking, unmistakable amp is exceptionally easy to use. Equipped with an accelerated MOSFET power amp, it delivers an awesome 600W of clear articulate sound. The Fafner is geared toward the sound conscious bass player who is looking for a crunchy, powerful, and authentic tube sound with a mighty punch.

EBS Fafner Bass Head Specifications:

• Height: 3U / 13 cm
• Width: 19"
• Depth: 10"
• Weight: 24 lbs

EBS Fafner Bass Head Features:

• 9-Volt Phantom Power System
• Tube-like compressor
• Easy-to-use filter section
• Hi and Lo-boost filters
• Tube overdrive/distortion
• Unique tube Character switch
• Floating balanced XLR output

Order today and put the Fafner in charge of your groove.

The choice of big-time bassists.

The EBS Fafner Bass Head has a tube-armed preamp and is the choice of rock professionals the world over. This good-looking, unmistakable amp is exceptionally easy to use. Equipped with an accelerated MOSFET power amp, it delivers an awesome 600W of clear articulate sound. The Fafner is geared toward the sound conscious bass player who is looking for a crunchy, powerful, and authentic tube sound with a mighty punch.

EBS Fafner Bass Head - Scratch 'n' Dent Specifications:

• Height: 3U / 13 cm
• Width: 19"
• Depth: 10"
• Weight: 24 lbs

EBS Fafner Bass Head - Scratch 'n' Dent Features:

• 9-Volt Phantom Power System
• Tube-like compressor
• Easy-to-use filter section
• Hi and Lo-boost filters
• Tube overdrive/distortion
• Unique tube Character switch
• Floating balanced XLR output

Order today and put the Fafner in charge of your groove.

A pro rig that's got the tone, the power, and the versatility you need.

An ultracompact and light bass head loaded with useful features for the player who demands clout and versatility without fuss. Has superb dynamics and consistent quality throughout the entire frequency range, from the lowest sub-bass to the highest treble timbres. It's loaded with a compressor/limiter, powerful 4-band EQ,tube and speaker simulator, bright filter, an overdrive stage and a powerful accelerated 350W MOSFET power amp with a highly efficient cooling system. Other pro features: erial and parallel effects loop, floating balanced XLR output, speaker simulator, and 9V phantom power.

EBS HD-350 High Definition Bass Head Specifications:

• Height: 9 cm
• Width: 48 cm
• Depth: 30 cm
• Weight: 20 lbs

EBS HD-350 High Definition Bass Head Features:

• 100% Solid State Design
• Drive control
• Tube Emulated Drive Control
• Compressor/Limiter .
• Powerful 4-band EQ
• Serial and Parallel Effects loop
• Floating balanced XLR output
• Built-in speaker simulator
• 9 volt EBS Phantom Power System
• Active Intelligent cooling system
• 350w pure MOSFET power

It's a gigging musicians dream amp. Order today and live the dream.

Big watts and astounding versatility.

The EBS TD650 is a compact and powerful package, loaded with tube, solid state, and MOSFET technology. This no-compromise amp will satisfy every demand of the most versatile bass player.

The TD650 includes a 3-band equalizer with sweepable midrange, notch filter, compressor, bright filter, pure overdrive section and extras that include the unique EBS Phantom Power System, floating balanced XLR output, character filter, speaker simulator, line out and a serial/parallel effects loop. The overdrive section can be selected in tube or solid-state mode, employing either pure tube drive or solid-state tube emulation, to create your sound.

EBS TD650 Tube Definition Bass Head Specifications:

• Height: 3U / 13 cm
• Width: 19"
• Depth: 14"
• Weight: 27 lbs

EBS TD650 Tube Definition Bass Head Features:

• Switchable tube/solid State
• Drive control
• Unique tube suspension system
• Compressor/Limiter .
• Extremely powerful 4-band EQ
• Serial and parallel effects loop
• Floating balanced XLR output
• Built-in speaker simulator
• 9-volt EBS Phantom Power System
• Active intelligent cooling system
• 650W pure MOSFET power

It's a great head. Order today with the assurance of our 45-day lowest price and total satisfaction guarantees!

Eden's most sophisticated integrated amp ever.

The WT1205 World Tour Bass Head features dual 7025 preamp tubes to drive 2 separate channels that can be used individually or blended for dual channel instruments such as The Stick. Each channel features Dynamic Bass and Treble boosters, a unique EQ center (4-band on Channel 1, 3-band with sweepable mid on Channel 2), pre- and post-effects loops, and variable compression. Using automix technology, the studio-quality DI (selectable pre- or post-EQ) always sends the active channel(s) to the console.

Dial in your sounds and then use its 1200W of RMS power to drive a variety of compatible multiple-speaker arrays. Execute changes on the fly with the included footswitch for mute, channel switching, master gain booster (the solo button), and enhance bypass.

Eden WT1205 World Tour Bass Head Specifications:

• Power: 2x500/600 RMS @ 4 and 2 ohms
• Power Mono Bridged: 1200/1000W RMS @ 4 and 8 ohms
• Distortion: <.05%
• Frequency Response: 10Hz-20KHz ±2dB
• Headroom: 3dB
• Dimension: 17"W X 3-1/2"H X 13"D
• Weight: 26 lbs.

Eden WT1205 World Tour Bass Head Features:

• 7025 preamp tubes per channel
• 2 independent channels
• Each channel features Dynamic Bass and Treble boost
• 4-band on Ch. 1
• 3-band with sweepable mid on Ch. 2
• Pre- and post-effects loops on each channel
• Variable compression
• Studio-quality DI (selectable pre- or post-EQ) with automix technology
• 1200W of power to drive multiple speaker arrays

The WT1205 offers the discriminating bassist more power, more versatility, and more musicality. Buy it and play big.

Eden's most sophisticated integrated amp ever.

The WT1205 World Tour Bass Head features dual 7025 preamp tubes to drive 2 separate channels that can be used individually or blended for dual channel instruments such as The Stick. Each channel features Dynamic Bass and Treble boosters, a unique EQ center (4-band on Channel 1, 3-band with sweepable mid on Channel 2), pre- and post-effects loops, and variable compression. Using automix technology, the studio-quality DI (selectable pre- or post-EQ) always sends the active channel(s) to the console.

Dial in your sounds and then use its 1200W of RMS power to drive a variety of compatible multiple-speaker arrays. Execute changes on the fly with the included footswitch for mute, channel switching, master gain booster (the solo button), and enhance bypass.

Eden WT1205 World Tour Bass Head - Scratch 'n' Dent Specifications:

• Power: 2x500/600 RMS @ 4 and 2 ohms
• Power Mono Bridged: 1200/1000W RMS @ 4 and 8 ohms
• Distortion: <.05%
• Frequency Response: 10Hz-20KHz ±2dB
• Headroom: 3dB
• Dimension: 17"W X 3-1/2"H X 13"D
• Weight: 26 lbs.

Eden WT1205 World Tour Bass Head - Scratch 'n' Dent Features:

• 7025 preamp tubes per channel
• 2 independent channels
• Each channel features Dynamic Bass and Treble boost
• 4-band on Ch. 1
• 3-band with sweepable mid on Ch. 2
• Pre- and post-effects loops on each channel
• Variable compression
• Studio-quality DI (selectable pre- or post-EQ) with automix technology
• 1200W of power to drive multiple speaker arrays

The WT1205 offers the discriminating bassist more power, more versatility, and more musicality. Buy it and play big.

Studio sound at any volume level.

Eden's Time Traveler bass amplifier produces warm, studio sound quality and very low noise levels. A redesigned sloped front panel allows easy access to the simplified control section with mid shift and bypass. A dbx style compressor with adjustable threshold is coupled to dual inputs and the renowned Eden Enhance control. The Time Traveler has an entirely new feature, an optically-coupled dynamic Smart Booster for bass and treble. This allows for the bass and highs to be solid and well defined from a whisper to a roar. It automatically compensates for playing level so that the sound quality is consistent. Additional features include multiple patch points, auxiliary inputs, variable distortion, pre/post DI section, mute to tune function, and a built-in practice mode.

Eden WT405 Time Traveler Bass Head Specifications:

• Power (@8/4/2 ohms):250/405/620W RMS
• Distortion: <.05%
• Frequency Response: 10Hz - 15KHz ±2dB
• Headroom: 3dB
• Dimensions: 13"W x 3-1/2"H x 12"D
• Weight: 15 lbs.

Eden WT405 Time Traveler Bass Head Features:

• Warm, studio sound quality
• Very low noise levels
• Sloped front panel for easy access
• dbx-style compressor with adjustable threshold
• Dual bass inputs
• Eden Enhance control
• Multiple patch points
• Auxiliary inputs
• Variable distortion
• Pre/post DI section
• Mute to tune function
• Built-in practice mode
• Optically-coupled dynamic Smart Booster

The WT405 Time Traveler is one sweet bass amp compact, well-powered, fully equipped, and loaded with tone that'll have you licking your chops. Order today.

Studio sound at any volume level.

Eden's Time Traveler bass amplifier produces warm, studio sound quality and very low noise levels. A redesigned sloped front panel allows easy access to the simplified control section with mid shift and bypass. A dbx style compressor with adjustable threshold is coupled to dual inputs and the renowned Eden Enhance control. The Time Traveler has an entirely new feature, an optically-coupled dynamic Smart Booster for bass and treble. This allows for the bass and highs to be solid and well defined from a whisper to a roar. It automatically compensates for playing level so that the sound quality is consistent. Additional features include multiple patch points, auxiliary inputs, variable distortion, pre/post DI section, mute to tune function, and a built-in practice mode.

Eden WT405 Time Traveler Bass Head - Scratch 'n' Dent Specifications:

• Power (@8/4/2 ohms):250/405/620W RMS
• Distortion: <.05%
• Frequency Response: 10Hz - 15KHz ±2dB
• Headroom: 3dB
• Dimensions: 13"W x 3-1/2"H x 12"D
• Weight: 15 lbs.

Eden WT405 Time Traveler Bass Head - Scratch 'n' Dent Features:

• Warm, studio sound quality
• Very low noise levels
• Sloped front panel for easy access
• dbx-style compressor with adjustable threshold
• Dual bass inputs
• Eden Enhance control
• Multiple patch points
• Auxiliary inputs
• Variable distortion
• Pre/post DI section
• Mute to tune function
• Built-in practice mode
• Optically-coupled dynamic Smart Booster

The WT405 Time Traveler is one sweet bass amp compact, well-powered, fully equipped, and loaded with tone that'll have you licking your chops. Order today.

For the professional bassist who's going places.

You'll find the Eden WT550 Traveler to be unsurpassed in its combination of compact size and big power. The hybrid tube design is rated at 750W at 2 ohms with a minimum of 3dB of headroom. Standard features include low-noise circuitry design, -12dB input pad, switchable automatic compression, 5-way semi-parametric tone control, mono pre and stereo post tone control effects loops, stereo aux inputs, DI out with ground lift, headphone out, tuner out, and a thermostatically controlled fan.

Eden WT550 Traveler Bass Head Specifications:

• Power (8, 4, 2 ohms): 300/500/750W RMS
• Distortion: <.05%
• Frequency Response: 10Hz - 15KHz ±2dB
• Headroom: 3dB
• Dimensions: 12"W x 3-1/2"H x 12"D
• Weight: 20 lbs.

Eden WT550 Traveler Bass Head Features:

• 300/500/750W RMS power @ 8, 4, and 2 ohms
• 3dB of headroom
• Low-noise circuitry
• -12dB input pad
• Switchable automatic compression
• 5-way semi-parametric tone control
• Mono pre and stereo post tone control effects loops
• Stereo aux inputs
• DI out with ground lift
• Headphone out
• Tuner out
• Thermostatically controlled fan

A bass amp of class and distinction, plus it's practical, too. Order the WT550 today.

The perfect choice for the touring professional!

The powerhouse Eden WT800 World Tour Bass Amp Head features a tube hybrid stereo amplifier design with a conservative rating of 440W per side into 4 ohms, 880W bridged into eight ohms, and 3dB of headroom. If you need to move a lot of air, this is a bass head that will do it. The Eden WT800 bass amp head also has a -12dB input pad, switchable automatic compression, 5-way semi-parametric tone control, mono pre- and stereo-post tone control effects loops, stereo aux inputs, a DI out with ground lift, headphone out, tuner out, and a thermostatically controlled fan.

Eden WT800 World Tour Bass Amp Head Features:

• 440W per side into four ohms
• 880W bridged into eight ohms
• 3dB of headroom
• -12dB input pad
• Switchable automatic compression
• Five-way semi-parametric tone control
• Mono pre- and stereo-post tone control effects loops
• Stereo aux inputs, a DI out with ground lift
• Headphone out
• Tuner out
• Thermostatically controlled fan

Be ready for that world tour you may soon be going on. Order today. You never know when the call may come.