Marshall roar - 1967 style.

This half stack includes the Marshall 1959HW Handwired Plexi Amp Head and Marshall 1960AHW or 1960BHW 120W 4x12 Extension Cabinet.

Marshall 1959HW Handwired Plexi Amplifier Head
The 1959HW is a handwired reissue of a circa 1967 100W Superlead head. Since 1967 when the JMP (Jim Marshall Products) Plexi panels were introduced, the Superlead head has been the benchmark for all-tube distortion and tight crunch. Tube lineup includes 4 EL34s in the power section and 3 ECC83s in the preamp. True bypass effects loop, 3-band EQ, and presence control.

Marshall 1960AHW or 1960BHW 120W 4x12 Extension Cabinet
The Marshall 1960 AHW or 1960BHW Extension Speaker Cabinet is a hand-soldered, 120W, mono, 16-ohm 4x12" guitar speaker cabinet with salt 'n' pepper grille cloth, metal handles, loaded with reissue 30W Celestion G12H speakers.

Marshall 1959HW and 1960AHW or 1960BHW Half Stack Features:

• Marshall 1959HW Handwired Plexi Head
• Handwired reissue of 1967 Superlead
• 100W
• 4 EL34 power tubes
• 3 ECC83 preamp tubes
• True bypass effects loop
• 3-band EQ
• Presence control
  
  Marshall 1960AHW or 1960BHW 120W 4x12 Extension Cabinet
• Hand soldered
• 4x12" cabinet
• 120W
• Mono
• 16 ohm
• Salt 'n' pepper grille
• Metal handles
• Reissue 30W Celestion G12H speakers

Thirsty for more power and tube tone? Get the original quencher for a dry guitar tone. Order today.

The sound that started it all.

1959SLPX Vintage Series 100W Tube Head

This all-tube Marshall 1959SLPX half-stack tone machine cranks out fabulous lead distortion and tight crunch exactly like the original model from the 1967 to 1969 era. This guitar amp head features 100W of power from 4 EL34s and 3 ECC83s in the preamp-the exact configuration of the original. True bypass series FX loop, 3-band EQ, and presence control.

1960AX and 1960BX 100W 4x12 Guitar Extension Cabinet

The Marshall 1960AX and 1960BX speaker cabs consist of 4 separate birch ply enclosures each. They are loaded with a Celestion G12M Greenback 12" speaker and have a 100W power handling rating. Tonally these speaker cabinets falls between the 1960AX's brightness and the 1960TV's warmth. Greenback G12M speakers have a very distinctive sound with a fast, snappy response that adds detail and dynamics to both clean and distorted playing. The 1960X Extension Cabinet uses the early '70s LC checkered grille cloth and a less-textured vinyl covering. A power brake is recommended. The 1960AX is an angled cab. The 1960BX is a straight cab.

Marshall 1959SLP and 1960AX or 1960BX Half Stack Features:

• Head:
• 100W
• 4 EL34s in the power stage
• 3 ECC83s in the preamp
• True bypass series FX loop
• 3-band EQ
• Presence control
  
  Cabinet:
• Four 12" Celestion Greenback G12M speakers
• 100W handling
• Checkered grille cloth
• Straight or angled front
• 100 lbs.

Order today and rule.

A rig designed to meet the needs of Edward Van Halen.

The 5150III™ amp's flexible feature set allows creation of tones from clean to crunch to full-out distortion, inspiring limitless artistic expression; the matching 412 enclosure with custom Celestion EVH signature speakers delivers richness and power. Truly roadworthy, EVH® amps feature no-compromise construction promising peak performance for years to come.

EVH 5150 III HD and 4x12 Half Stack Specifications:

• Head
• COVERING: Textured vinyl covering (black or ivory), EVH® striped metal grille
• WEIGHT: 55 lbs. (25 kg)
• DIMENSIONS:
• Height 10.25" (26 cm)
• Width: 29.75" (75.5 cm)
• Depth: 11.5" (29.3 cm)
• OUTPUT: 100 watts RMS
• TUBES: Four 6L6 output tubes, eight 12AX7 preamp tubes
• SHIPPING WEIGHT: 60 lbs. (27.2 kg) including packaging
• INTRODUCED: July 1, 2007
• FOOTSWITCH: Four-button footswitch included (P/N 007-0926-000)
  
  Enclosure
• WEIGHT: 88 lbs. (40 kg)
  
  DIMENSIONS
• Height: 30" (76.2 cm)
• Width: 29.25" (74.3 cm)
• Depth: 14" (35.5 cm)
• POWER HANDLING: 100 watts RMS
• SHIPPING. WEIGHT: 98 lbs. (44.4 kg) including packaging
• ACCESSORIES: Pop-out swivel casters included, P/N 005-6483-000

EVH 5150 III HD and 4x12 Half Stack Features:

• Enclosure
• OHMS: 16 ohms
• SPEAKERS Four 12" 15-ohm Celestion® G12EVH, P/N 007-3326-000
  
  FEATURES: Premium birch-ply construction
• Large-radius rounded edges
• Metal corners
• Recessed metal handles
• Single 1/4" input
• COVERING: Textured vinyl covering, heavy woven black grille cloth

Save BIG when you buy today!

A rock standard now with impedance switching!

If you want to keep it simple, this half stack kit which includes the JCM800 2203 Vintage Series 100W Tube Head and 1960AV or 1960BV 280W 4X12 Guitar Extension Cabinet is the kit to get you going.

JCM800 2203 Vintage Series 100W Tube Head
The all-valve JCM800 2203 is one of the most highly respected 100W Marshall heads in the company's long history. Evolving from the legendary Plexi head, it was one of the first Marshall amps to feature a master volume control. The essence of simplicity, the JCM800 is a one-channel, all-valve amp with no reverb or effects. Its easy control panel, distinctive roar, and larger-than-life edge immediately set the standard by which all other rock amps were judged and it remained the industry benchmark throughout the entire 16 years of its production life. Now it's back by popular demand and features a Series Effects Loop with true bypass that takes the loop completely out of the circuit ensuring the original tone isn't compromised in any shape or form.

1960AV or 1960BV 280W 4x12 Guitar Extension Cabinet
The Marshall 1960V Vintage Speaker Cabinet puts out beautiful tone at any volume. The addition of an impedance (4 or 16 ohm) mono/stereo switching mechanism has transformed the "industry standard" 1960 into the ultimate speaker cab. This 280W Marshall cab is loaded with Celestion Vintage 30 speakers.

Marshall JCM800 2203X and 1960AV or 1960BV Half Stack Specifications:

• JCM800 2203 Vintage Series 100W Tube Head
• 100W
• 30"W x 9"H x 12"D
• 41 lbs.
  
  1960AV or 1960BV 280W 4x12 Guitar Extension Cabinet
• 280W handling
• Impedance (4 or 16 ohm) with Mono/Stereo switching

Marshall JCM800 2203X and 1960AV or 1960BV Half Stack Features:

• JCM800 2203 Vintage Series 100W Tube Head
• 4 EL34s in the power stage
• 3 ECC83s in the preamp
• True bypass series FX loop
• 3-band EQ
• Presence control
  
  1960AV or 1960BV 280W 4x12 Guitar Extension Cabinet
• 4 x 12 Celestion Vintage 30 speakers

No backline would be complete without the legendary Marshall 4x12 cab. Order now.

Inspired by Pete Townshend's quest for power, this is a half-stack for heavy hitters.

Marshall 1959SLPX Vintage Series 100W Tube Head
This all-tube tone machine cranks out fabulous lead distortion and tight crunch exactly like the original model from the 1967 to 1969 era. Inspired by Pete Townshend's unquenchable thirst for volume, this guitar amp head features 100W of power from 4 EL34s and 3 ECC83s in the preamp-the exact configuration of the original. True bypass series FX loop, 3-band EQ, and presence control.

Marshall 1960TV Cabinet
The 1960TV speaker cab has an angled front; four 12" Greenback speakers; and a warmer, thicker sound than the 1960A. This 100W, mono, 16-ohm cabinet is 3 inches taller than a standard 1960A 4x12 cabinet which results in well defined mid range and a lowered resonant frequency for more prominent lows. The 25W Greenbacks are less in your face than the 75W Celestions in the 1960A. Although not a reissue-it was never offered in the past-this cab recreates the classic look and tones of yesteryear.

Marshall 1959SLPX and 1960TV Half Stack Specifications:

• Marshall 1960TV Cabinet
• Handles 100W
• 16 ohms
• 29-3/5"W x 35-1/2"H x 14-4/5"D
• 97 lbs.

Marshall 1959SLPX and 1960TV Half Stack Features:

• Marshall 1959SLPX Vintage Series 100W Tube Head
• 4 EL34s in the power stage
• 3 ECC83s in the preamp
• True bypass series FX loop
• 3-band EQ
• Presence control
  
  Marshall 1960TV Cabinet
• Angled front
• Four 12" 25W Greenback speakers for warmer, thicker sound than the 1960A
• Original grille cloth
• 3" taller than standard 4x12 cabs

Order today with the protection of our 45-day lowest price and total satisfaction guarantees!

More channels, more gain, more versatility.

This half stack includes the Marshall JVM410H Tube Amp Head and 1960V Vintage Speaker Cabinet.

JVM410H Tube Amp Head
In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-Watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall to date and that's really saying something!

Each of its 4 channels Clean, Crunch, OD1 & OD2 are not only completely independent of each other, they all boast 3 Modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshalls in one!

The JVM410H amp head has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to controls Volume, Bass, Middle, Treble & Gain accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls 2 Master Volumes plus Resonance & Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410H all-valve amp head will give you whatever tone you need right when you need it.

1960V Vintage Speaker Cabinet
The Marshall 1960V Vintage Speaker Cabinet puts out beautiful tone at any volume. The addition of an impedance (4 or 16 ohm) mono/stereo switching mechanism has transformed the "industry standard" 1960 into the ultimate speaker cab. This 280W Marshall cab is loaded with Celestion Vintage 30 speakers.

Marshall JVM Series JVM410H and 1960AV or 1960BV Half Stack Features:

• JVM410H Tube Amp Head
• 
  
• 100-Watt valve head
• Valve complement: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable digital reverb with level controls for all 4 channels.
• 2 footswitchable master volumes
• Two FX loops Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England
  
  1960V Vintage Speaker Cabinet
  
• 280W handling
• 4 - 12" Celestion Vintage 30 speakers
• Impedance (4 or 16 ohm) and mono/stereo switching

No backline would be complete without the legendary Marshall head and 4x12 cab. Order now.

JVM410H Tube Amp Head

In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall guitar amp head to date-and that's really saying something.

Each of its 4 channels-Clean, Crunch, OD1 & OD2-are not only completely independent of each other, they all boast 3 modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshalls in one.

The JVM410H amp head has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to control-Volume, Bass, Middle, Treble & Gain-accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls-2 Master Volumes plus Resonance & Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amplifier's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410H all-valve guitar amp head will give you whatever tone you need right when you need it.

1960A and 1960B 300W 4x12 Guitar Extension Cabinet

The Marshall 1960 Speaker Cabinet puts out beautiful tone at any volume. The addition of an impedance (4 or 16 ohm) mono/stereo switching mechanism has transformed the "industry standard" 1960 into the ultimate speaker cab. These 300W Marshall speaker cabinets are loaded with Celestion Vintage speakers. The 1960A cab is angled. The 1960B cab is straight.

Marshall JVM Series JVM410H and 1960A or 1960B Half Stack Features:

• Head:
• 100-watt valve head
• Valve complement: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable digital reverb with level controls for all 4 channels.
• 2 footswitchable master volumes
• Two FX loops Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England
  
  Cabinet:
• Speaker type: Celestion G12T-75W
• Speaker configuration: 4x12"
• Power (RMS): 300W
• Selectable mono/stereo: Yes
• Impedance stereo/mono: 8 Ohm, 16/4 Ohm
• 30"W x 32-3/4"H x 14-1/4"D
• 82 lbs.

Save BIG when you buy today!

Real all-tube vintage flavor from the original maker.

This half stack includes the Marshall 1987XL Vintage Series 50W Tube Head and Marshall 1960AX or 1960BX 100W 4x12 Guitar Extension Cabinet.

1987XL Vintage Series 50W Tube Head
The Marshall 1987XL Vintage Series 50W Tube Head gives you all the fabulous tube tone of the original 1987X from the 1966 to 1969 era plus a true bypass series FX loop. 3 ECC83 tubes in the preamp and 2 EL34s in the power section dish out that delicious, nasty overdrive behind Hendrix, Townshend, and scores of other greats. 3-band EQ and presence controls provide all the tweakage necessary to get the most out of this classic screamer. 50W. 26"W x 8"H x 10"D. 34 lbs.

Marshall 1960X 100W 4x12 Guitar Extension Cabinet
The Marshall 1960X cab consists of 4 separate birch ply speaker enclosures, each loaded with a Celestion G12M Greenback 12" speaker and has a 100W power handling rating. Tonally this speaker cabinet falls between the 1960A's brightness and the 1960TV's warmth. Greenback G12M speakers have a very distinctive sound with a fast, snappy response that adds detail and dynamics to both clean and distorted playing. The 1960X Extension Cabinet uses the early '70s LC checkered grille cloth and a less-textured vinyl covering. If used as a half stack with a 100W head, a power brake is recommended.

Marshall 1987XL and 1960AX or 1960BX Half Stack Features:

• 1987XL Vintage Series 50W Tube Head
• 50W of classic all-tube power
• 3 ECC83 tubes in the preamp
• 2 EL34s in the power section
• 3-band EQ
• Presence control
  
  Marshall 1960X 100W 4x12 Guitar Extension Cabinet
• 4 - 12" Celestion Greenback G12M speakers
• 100W handling
• Checkered grille cloth
• Straight or Angled front
• 100 lbs

To get the real sound, go for the real deal. Order today!

100 watts of insane power and Slayer tone!

This half stack includes the Marshall 2203KK Kerry King Signature JCM800 Guitar Amp Head and 1960V Vintage Speaker Cabinet.

Marshall 2203KK Kerry King Signature JCM800 Guitar Amp Head
The all-valve Kerry King Signature JCM800 2203KK is the essence of simplicity-a single-channel tube amplifier head with no reverb or effects. It's easy control panel, distinctive roar, and larger than life edge has set the standard by which many rock amps are judged.

This Kerry King model features a switchable Kerry King signature sound section called "The Beast" that has two adjustable controls -"Assault" & "Gate." "Assault" intensity controls the extent of Kerry's signature EQ boost, and "Gate" is an adjustable, studio-quality, ultra-fast noise reduction unit. You'll still find a Series Effects Loop with true bypass that takes the loop completely out of the circuit, ensuring the original tone isn't compromised in any shape or form. The 3-band EQ gives you plenty of control, but the base tone of this amp is patterned after the reverse-shape EQ setting used by Kerry himself! Eye-catching tribal graphics blaze from the front panel and baffle. Jim Marshall and Kerry King's signature's on the control panel identify its pedigree.

One of the nicest surprises: Marshall has added functionality to the amplifier, while lowering the price!

1960V Vintage Speaker Cabinet
The Marshall 1960V Vintage Speaker Cabinet puts out beautiful tone at any volume. The addition of an impedance (4 or 16 ohm) mono/stereo switching mechanism has transformed the "industry standard" 1960 into the ultimate speaker cab. This 280W Marshall cab is loaded with Celestion Vintage 30 speakers.

Marshall JCM800 2203KK and 1960AV or 1960BV Half Stack Features:

• Marshall 2203KK Kerry King Signature JCM800 Guitar Amp Head
• 
  
• 100W valve head
• 4 KT88s in the power stage
• 3 ECC83s in the preamp
• Master Volume
• Preamp Volume
• Standby Switch
• True bypass series FX loop
• 3-band EQ
• Presence control
• "The Beast" Boost
• Gate Threshold
• Assault Intensity
• Jim Marshall and Kerry King signatures on control panel
• Made in England
• 30"W x 9"H x 12"D
• 41 lbs.
  
  1960V Vintage Speaker Cabinet
  
• 280W handling
• 4 - 12" Celestion Vintage 30 speakers
• Impedance (4 or 16 ohm) and mono/stereo switching

Don't wait! Call or click today to order.

The amp that started it all!

This half stack includes the Marshall JTM45 Amp Head and Marshall 1960AX or 1960BX 100W 4x12 Guitar Extension Cabinet.

Marshall JTM45 Amplifier Head
The Marshall JTM45 Amp Head is a lovingly created reproduction of Jim Marshall's first amplifier. Now the classic JTM45 is accessible to all who enjoy its glassy, clean tone and fluid, warm sustain.

By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45's glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smolder beneath every note you play.

Marshall 1960AX or 1960BX 100W 4x12 Guitar Extension Cabinet
The Marshall 1960X consists of 4 separate birch ply speaker enclosures, each loaded with a Celestion G12M Greenback 12" speaker and has a 100W power handling rating. Tonally this speaker cabinet falls between the 1960A's brightness and the 1960TV's warmth. Greenback G12M speakers have a very distinctive sound with a fast, snappy response that adds detail and dynamics to both clean and distorted playing. The 1960X Extension Speaker Cabinet uses the early '70s LC checkered grille cloth and a less-textured vinyl covering. If used as a half stack with a 100W head, a power brake is recommended.

Marshall JTM45 and 1960AX or 1960BX Half Stack Features:

• Marshall JTM45 Amp Head
• 30W head
• Clean tone
• Warm sustain
• Classic design
• Output (RMS): 30 watts
• Preamp valves: 3 x ECC83
• Power amp valves: 2 x 5881
• GZ34 valve rectifier
• 3-band EQ
• Presence control
• Dimensions: 26"W x 10-1/4"H x 8"D
• Weight: 32 lbs.
  
  Marshall 1960AX or 1960BX 100W 4x12 Guitar Extension Cabinet
• 4 - 12" Celestion Greenback G12M speakers
• 100W handling
• Checkered grille cloth
• Straight or Angled front
• 100 lbs

Buy the JTM45 Half Stack TODAY, and relive the magic of your youth!

A rig powered by Jim Marshall's original head design!

Marshall JTM45 Amp Head
A lovingly created reproduction of Jim Marshall's first amplifier. Now the classic JTM45 is accessible to all who enjoy its glassy, clean tone and fluid, warm sustain.
By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45's glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smolder beneath every note you play.

Marshall 1960TV Cabinet
Has an angled front; four 12" Greenback speakers; and a warmer, thicker sound than the 1960A. This 100W, mono, 16-ohm cabinet is 3 inches taller than a standard 1960A 4x12 cabinet which results in well defined mid range and a lowered resonant frequency for more prominent lows. The 25W Greenbacks are less in your face than the 75W Celestions in the 1960A. Although not a reissue-it was never offered in the past-this cab recreates the classic look and tones of yesteryear.

Marshall JTM45 and 1960TV Half Stack Specifications:

• Marshall JTM45 Amp Head
• Output (RMS): 30 watts
• Preamp valves: 3 x ECC83
• Power amp valves: 2 x 5881
• GZ34 valve rectifier
• 3-band EQ
• Presence control
• 26"W x 10-1/4"H x 8"D
• 32 lbs.
  
  Marshall 1960TV Cabinet
• Handles 100W
• 16 ohms
• 29-3/5"W x 35-1/2"H x 14-4/5"D
• 97 lbs.

Marshall JTM45 and 1960TV Half Stack Features:

• Marshall JTM45 Amp Head
• 30W head
• Clean tone
• Warm sustain
• Classic design
  
  Marshall 1960TV Cabinet
• Angled front
• Four 12" 25W Greenback speakers for warmer, thicker sound than the 1960A
• Original grille cloth
• 3" taller than standard 4x12 cabs

Get the sound that launched a thousand rock hits! Order with the protection of our 45-day lowest price and total satisfaction guarantees!

A killer package that'll save you a C-note.

The 1987XL head:

All the fabulous tube tone of the original 1987X from the 1966 to 1969 era plus a true bypass series FX loop. 3 ECC83 tubes in the preamp and 2 EL34s in the power section dish out that delicious, nasty overdrive behind Hendrix, Townshend, and scores of other greats. 3-band EQ and presence controls provide all the tweakage necessary to get the most out of this classic screamer. 50W. 26"W x 8"H x 10"D. 34 lbs.

The 1960TV cab:

This classic cab has an angled front; 4 - 12" Greenback speakers; and a warmer, thicker sound than the 1960A. The midrange is well-defined and a more rounded high-end sparkles without being overly bright. The 25W Greenbacks are less in your face than the 75W Celestions in the 1960A. It has reissue original grille cloth and is 3" taller than standard 4x12 cabs. Handles 100W. 29-3/5"W x 35-1/2"H x 14-4/5"D.

Marshall 1987XL Head and 1960TV Cab Half Stack Features:

• The head:
• 50W of classic all-tube power
• 3 ECC83 tubes in the preamp
• 2 EL34s in the power section
• 3-band EQ
• Presence control
• 1960TV:
• Angled front
• 4 - 12" 25W Celestion Greenback speakers
• Original grille cloth
• 3" taller than standard 4x12 cabs
• Handles 100W
• 29-3/5"W x 35-1/2"H x 14-4/5"D.
• 97 lbs.

Save $100 when you buy the 2 together. Order now!

More channels, more gain, more versatility.

There's nothing to lose and a lot of gain with this Marshall JVM410H Tube Amp Head and 1936 2 x 12 Half Stack kit, a foot-stomping deal if there ever was one.

JVM410H Tube Amp Head
In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-Watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall to date-and that's really saying something!

Each of its 4 channels Clean, Crunch, OD1 & OD2 are not only completely independent of each other, they all boast 3 Modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshall amps in one!

The JVM410H has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to controls Volume, Bass, Middle, Treble & Gain-accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls-2 Master Volumes plus Resonance & Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410H all-valve amp head will give you whatever tone you need right when you need it.

1936 2x12 Cabinet
The Marshall 1936 2x12 Cabinet has two 12" Celestion G12T75 speakers to handle 150W. Size matches full-size Marshall heads. Offers mono or stereo option (eight ohms mono; sixteen ohms stereo). Marshall constructs the 1936 Speaker Cabinet with locking joints; smooth ABS plastic corners; and heavy-duty, ergonomically recessed grab handles.

Marshall JVM Series JVM410H and 1936 2x12 Half Stack Features:

• JVM410H Tube Amp Head
• 100-Watt valve head
• Valve complement: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels-Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable digital reverb with level controls for all 4 channels.
• 2 footswitchable master volumes
• Two FX loops-Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England
  
  1936 2x12 Cabinet
• Two 12" Celestion G12T75 speakers
• 150W handling
• Mono or stereo option
• Size matches full-size heads

Order today with the protection of our 45-day lowest price and total satisfaction guarantees!

20W of tube-tone heaven.

Harken back to the golden age of rock and roll with this Marshall Half Stack featuring two classics together, the 2061X Handwired 20W Amp Head and a 2061CX 2x12 Extension Cabinet.

2061X Handwired 20W Amp Head
The Marshall 2061X 20W Amp Head is a hand-wired reissue of the model 2061, a "Lead and Bass" head originally produced from 1967 to 1973. With 20W of power, it churned out golden crunchy tones with depth and character. The Marshall 2061X head comes with 2 EL84 tubes in the power amp, 2 ECC83s in the preamp, and a solid state rectifier.

2061CX 2x12 Extension Cabinet
The Marshall 2061CX cab is a hand-soldered, 60W, 2x12" angled speaker cabinet that matches the 2061X. Loaded with reissue 30W Celestion G12H speakers.

Marshall 2061X and 2061CX 2x12 Half Stack Features:

• 2061X Handwired 20W Amp Head
• Hand-wired reissue of the 2061 "Lead and Bass" head
• 20W
• 2 EL84 tubes in the power amp
• 2 ECC83s in the preamp
• Solid state rectifier
  
  2061CX 2x12 Extension Cabinet
• Hand soldered
• 60W
• 2x12" reissue 30W Celestion G12H speakers

The sound you've dreamed of, delivered to your door. Order today.

Are you tough enough for Kerry King's Slayer rig?

All hail the King, Kerry King that is. This Marshall amp and cabinet package is for those who love to shred. Pairing the 2203 Kerry King Signature JCM800 Guitar Amp Head with the 1960A or 1960B 300W 4 x12 Guitar Extension Cabinet you'll be able to achieve the same intense crunch as Slayer's formidable axeman, at a price that won't have you selling your soul. Unless you want to of course.

2203KK Kerry King Signature JCM800 Guitar Amp Head
The all-valve Kerry King Signature JCM800 2203KK is the essence of simplicity-a single-channel tube amp with no reverb or effects. It's easy control panel, distinctive roar, and larger than life edge has set the standard by which many rock amps are judged.

This Kerry King model features a switchable Kerry King signature sound section called "The Beast" that has two adjustable controls-"Assault" & "Gate." "Assault" intensity controls the extent of Kerry's signature EQ boost, and "Gate" is an adjustable, studio-quality, ultra-fast noise reduction unit. You'll still find a Series Effects Loop with true bypass that takes the loop completely out of the circuit, ensuring the original tone isn't compromised in any shape or form. The 3-band EQ gives you plenty of control, but the base tone of this amp is patterned after the reverse-shape EQ setting used by Kerry himself! Eye-catching tribal graphics blaze from the front panel and baffle. Jim Marshall and Kerry King's signature's on the control panel identify its pedigree.

1960A or 1960B 300W 4x12 Guitar Extension Cabinet
The Marshall 1960 Speaker Cabinet puts out beautiful tone at any volume. The addition of an impedance (4 or 16 ohm) mono/stereo switching mechanism has transformed the "industry standard" 1960 into the ultimate speaker cab. These 280W Marshall cabs are loaded with Celestion Vintage speakers.

Marshall JCM800 2203KK and 1960A or 1960B Half Stack Specifications:

• 2203KK Kerry King Signature JCM800 Guitar Amp Head
• 30"W x 9"H x 12"D
• 41 lbs.
  
  1960A or 1960B 300W 4x12 Guitar Extension Cabinet
• Speaker Type: Celestion G12T-75W
• Speaker Configuration: 4 x12"
• Power (RMS): 300W
• Selectable Mono/Stereo: Yes
• Impedance Stereo/Mono: 8 ohm, 16/4 ohm
• 30"W x 32-3/4"H x 14-1/4"D
• 82 lbs.

Marshall JCM800 2203KK and 1960A or 1960B Half Stack Features:

• 2203KK Kerry King Signature JCM800 Guitar Amp Head
• 100W valve head
• 4 KT88s in the power stage
• 3 ECC83s in the preamp
• Master Volume
• Preamp Volume
• Standby Switch
• True bypass series FX loop
• 3-band EQ
• Presence control
• "The Beast" Boost
• Gate Threshold
• Assault Intensity
• Jim Marshall and Kerry King signatures on control panel
• Made in England
  
  1960A or 1960B 300W 4x12 Guitar Extension Cabinet

Order today with the protection of our 45-day lowest price and total satisfaction guarantees!

Classic tube tone from the days of huge guitar!

This half stack includes the Marshall JCM800 2203 Vintage Series 100W Tube Head and Marshall 1960A or 1960B 300W 4x12 Guitar Extension Cabinet.

Marshall JCM800 2203 Vintage Series 100W Tube Head
The all-valve JCM800 2203 is one of the most highly respected 100W Marshall heads in the company's long history. Evolving from the legendary Plexi head, it was one of the first Marshall amps to feature a master volume control. The essence of simplicity, the JCM800 is a one-channel, all-valve amp head with no reverb or effects. Its easy control panel, distinctive roar, and larger-than-life edge immediately set the standard by which all other rock amps were judged and it remained the industry benchmark throughout the entire 16 years of its production life. Now it's back by popular demand and just like the 1959SLP and 1987X it has a Series Effects Loop with true bypass that takes the loop completely out of the circuit ensuring the original tone isn't compromised in any shape or form. 30"W x 9"H x 12"D. 41 lbs.

Marshall 1960A or 1960B 300W 4x12 Guitar Extension Cabinet
The Marshall 1960 Speaker Cabinet puts out beautiful tone at any volume. The addition of an impedance (4 or 16 ohm) mono/stereo switching mechanism has transformed the "industry standard" 1960 into the ultimate speaker cab. These 280W Marshall cabs are loaded with Celestion Vintage speakers.

Marshall JCM800 2203X and 1960A or 1960B Half Stack Features:

• Marshall JCM800 100W
• 4 EL34s in the power stage
• 3 ECC83s in the preamp
• True bypass series FX loop
• 3-band EQ
• Presence control
  
  Marshall 1960A or 1960B 300W 4x12 Guitar Extension Cabinet
• Speaker Type: Celestion G12T-75W
• Speaker Configuration: 4"x12"
• Power (RMS): 300W
• Selectable Mono/Stereo: Yes
• Impedance Stereo/Mono: 8 Ohm, 16/4 Ohm
• 30"W x 32-3/4"H x 14-1/4"D
• 82 lbs.

Talent and a lot of hard work can get you far, but if you want to play like the big boys, you've got to play what the big boys play. Order today and get serious.

Vintage rock tones with modern features and high gain!

The Marshall Vintage Modern 2466 Half-Stack includes the Vintage Modern 2466 Tube Amp Head and Vintage Modern 425A angled speaker enclosure.

The Marshall Vintage Modern 2466 Tube Amp Head is an all-valve amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range delivers the performance you would expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with four KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effects to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

The Marshall Vintage Modern 425A angled speaker cab is a traditional Marshall 4 x 12 speaker cabinet in design. Mono/stereo switchable and loaded with G12C 25 Watt Celestion Greenbacks, this was specifically developed for the Limited Edition Jimi Hendrix Super100JH stack and are voiced to give that rich and balanced harmonic timbre that complements vintage tone and the Vintage Modern Series perfectly.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall 2466 and 425A or 425B Half Stack Specifications:

• Head Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
• Weight: 49.6 lbs (22.5 kg)
  
  Cabinet
• Impedance
• Mono 16 Ohms/4 Ohms
• Stereo 8 Ohms/8 Ohms
• Dimensions 30.5" x 30" x 14.5" (770 x 755 x 365 mm)
• Weight
• 425A: 79 lbs. (36 kg)

Marshall 2466 and 425A or 425B Half Stack Features:

• 100-Watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 4 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England
  
  100-Watt, 4x12" cabinet
• Angled front
• Loaded with Celestion G12C 25 Greenbacks
• Mono or Stereo switchable
• 16 Ohms/4 Ohms mono
• 8 Ohms stereo
• Birch ply construction
• "finger-locking" joints
• Made in England

This half-stack rocks with its classic Marshall sound and modern high-gain edge! Make it yours. Order today.

If you're looking for the perfect marriage of classic, vintage rock tones with modern feature and levels of gain, your search is over!

This half stack includes the Marshall Vintage Modern 2266 Tube Amp Head and Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet.

Marshall Vintage Modern 2266 Tube Amplifier Head
The Marshall Vintage Modern 2266 50 Watt Head is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effect to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.

The cosmetics on the Marshall 2266 amp head are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet
The Marshall Vintage Modern 425A angled cab and 425B straight guitar speaker extension cabinets are traditional Marshall 4 x 12 speaker cabs in design. These cabs are mono/stereo switchable and are loaded with G12C 25 Watt Celestion Greenbacks. These were specifically developed for the Limited Edition Jimi Hendrix Super100JH stack and are voiced to give that rich and balanced harmonic timbre that complements vintage tone and the Vintage Modern Series perfectly.

The cosmetics on the Marshall speaker cab are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2266 and 425A or 425B Half Stack Features:

• Marshall Vintage Modern 2266 Tube Amp Head
• 50-Watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England
• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
• Weight: 39.6 lbs (18 kg)
  
  Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet
• 100-Watt, 4x12" cabinet
• Angled front
• Loaded with Celestion G12C 25 Greenbacks
• Mono or Stereo switchable
• 16 Ohms/4 Ohms mono
• 8 Ohms stereo
• Birch ply construction
• "finger-locking" joints
• Made in England
• Impedance
• Mono 16 Ohms/4 Ohms
• Stereo 8 Ohms/8 Ohms
• Dimensions 30.5" x 30" x 14.5" (770 x 755 x 365 mm)
• Weight
• 425A: 79 lbs. (36 kg)
• 425B: 81.5 lbs (37 kg)

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

Tube flexibility and punch with easy-to-get modern screaming distortion.

This Half-Stack includes the Peavey JSX Joe Satriani Signature guitar amp Head and the JSX 412 Speaker Cabinet.

The Peavey JSX Joe Satriani Signature Head tears up the competition. Joe Satriani is undoubtedly one of the greatest guitar players of all time, and Peavey has built him an amp with the sound, feel, and flexibility he's always sought. With a punchy gain structure that boosts your playing with authority, this amp delivers sounds ranging from Classic 50 to vintage British, modern Triple XXX, and all the in-between tones.

The versatile and comprehensive control section supplies a master volume pot and independent volume knobs for each of the three channels (Ultra, Crunch, and Clean). Tone shaping is accomplished through passive controls for Bass, Mid, and Treble on the Clean channel, while the Ultra and Crunch channels use active Bottom, Body, and Hair (lo, mid, hi) controls. The Clean channel is pristine yet warm and is specifically voiced to work well with effects pedals. The Ultra and Crunch channels have gain controls and fat switches to further assist in taming this thunderous tube-powered beast while achieving killer sound.

Global resonance and presence knobs increase control of high-end tones, while a noise gate on the Crunch and Ultra channels cuts down on the excess noise generated by running the gain and EQ controls on high settings. Since the gate is fully adjustable, you can really clamp down, leave it slightly open, or just turn it off.

The JSX uses 3 - 12AX7 preamp tubes and 4 - EL34 power amp tubes. The power amp section delivers an earth-quaking 120W of pure tube power and can be converted to 4 - 6L6GC. It is also designed to work equally well into 4-, 8-, or 16-ohm loads.

With 400W of continuous power handling and four 12" custom JSX speakers, the Peavey JSX 412 Speaker Cabinet is the perfect compliment to the JSX amplifier. Co-designed by guitar legend Joe Satriani, the JSX 412 speaker cab features a microphone-simulated XLR direct output so you get Joe's live, onstage tone (speakers remain active when direct output is used) without using a separate mic and stand.

Peavey JSX Half-Stack Specifications:

• JSX Joe Satriani Signature Head
  
  26-5/8"W x 11-1/4"H x 11"D
• 50-3/4 lbs.
  
  JSX 412 Speaker Cabinet
  
  30.062"W x 31.875"H x 14.25"D
• 93 lbs.

Peavey JSX Half-Stack Features:

• JSX Joe Satriani Signature Head
  
  Designed to Joe Satriani's specifications
• Global Resonance and Presence controls
• 120W of pure tube power
• 3 channels: Ultra, Clean, and Crunch
• 3-band EQ on each channel
• Punchy high-gain structure on the Crunch and Ultra channels
• Comes with EL34 tubes, but can be configured for 6L6 tubes
• Fully adjustable noise gate for the Crunch and Ultra channels
• Separate Fat switches on the Crunch and Ultra channels
• All controls located on the front panel
• Noise gate
• Uses 3 - 12AX7 preamp tubes and 4 - 6L6GC power amp tubes
• Master volume
• Independent volume knobs
• Passive controls for bass, mid, and treble on the Clean channel
• Ultra and Crunch channels use active Bottom, Body, and Hair (lo, mid, hi) controls
• 4-, 8-, or 16-ohm loads
  
  JSX 412 Speaker Cabinet
  
  400Ws continuous power handling
• 16 ohms mono
• Four 12" custom JSX speakers (rear-mounted)
• 11-ply birch baffle
• Microphone-simulated XLR direct output
• Black weave grille cloth with JSX logo

If you're serious about your tone and need a highly versatile all-tube half-stack, look no further. This one has it all—order now!

The ultimate shred half stack.

This Line 6 half stack includes the HD147 300W Guitar Amp Head and a slant Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinet.

HD147 300W Guitar Amp Head
The Line 6 HD147 Guitar Amp Head starts with models of 10 essential modern high-gain amps and 8 vintage power favorites. Then the Line 6 designers took the best attributes of every great high-gain amp to create 14 Line 6 custom amps that are truly outrageous. With 300W of power, it delivers everything from the obscene to the sparkly clean with headroom to spare. All encased in a beautiful chrome chassis.

Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinet
The Spider Valve 412VS speaker cab from Line 6 features Premium Celestion® Vintage 30 speakers for superior tone of the highest-definition. This closed-back cab really lets you open up your Line 6 HD147 head and the Spider Valve's rugged construction and upgraded finish will look great behind you onstage at the club, the hall, or the stadium!

Line 6 Line 6 HD147 and 412VS Half Stack Features:

• HD147 300W Guitar Amp Head
  
• Evolved Tone
• 8 coveted vintage amp models
• 10 essential modern tones
• 14 otherworldly custom tones from crystal clean to grinding mayhem
• Mix and match cabinet models
• Award-winning amp tone available at the stereo XLR direct outputs
  
  Obscenely Loud
• 300W stereo current based power amp
• Thick 'n' fast low end
• Miles of headroom
  
  Premium Effects
• 12 vintage effect models based on award-winning Line 6 Delay and Modulation Modeler pedals
  
  Connectivity
• MIDI compatibility allowing access to deep editing and the ToneTransfer Library (coming soon)
  
  Add an FBV Shortboard foot controller:
• Access to 36 presets on the HD147
• Dedicated, hands-free channel switches
• Dedicated reverb and FX loop On/Off switches
• Wah / Volume pedal with toe switch On/Off
• Expression pedal input for separate Volume control
• Chromatic tuner
• Program patch Naming
• Powered by the HD147
  
  Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinet
  
• Celestion® Vintage 30 4x12
  
  Weight: 83 lbs.
• Dimensions: 29" L x 30" H x 15" D

Equip yourself with enough explosive power to stop a Bradley Fighting Vehicle in its tracks. Order today.