Amplification and volume control for up to 4 headsets.

Most home recordings involve from one to four people, any or all of whom are going to need headphone monitoring. The monitor amp would be connected to the tape deck's headphone output or a mixer output so that the performers can hear themselves and each other. Of course the same application can apply to band rehearsals and even home entertainment. HeadAMP provides amplification and individual volume control for up to 4 headsets. It can be driven by either line-level or headphone amplifier signals (mono or stereo).

ART HeadAMP 4 Stereo Headphone Amp Specifications:

• Signal To Noise Ratio: >90dB
• IMD (SMPTE): 0.01%
• Maximum Input Level: +14dBV
• Maximum Output Level: 20dB per channel
• Output Impedance: 51 Ohms per channel
• Output Connectors: Four stereo 1/4" headphone outputs
• Power Requirements: 12V DC (Adapter included)
• Total Harmonic Distortion: <0.01%
• Power: Power on LED
• Dimensions: 4.5" x 2.875" x 1.5" (150mm x 75mm x 38mm)
• Weight: 1.3 lbs. (590g)

ART HeadAMP 4 Stereo Headphone Amp Features:

• 4 channel headphone amp
• Stereo outputs
• Individual level controls

Get the HeadAMP for amplification and volume control for up to 4 headsets in your studio!

The HeadAmp6 Pro headphone amp by ART delivers six independent headphone outputs, each with bass and treble controls. Each channel offers an extensive feature set and routing capabilities that make the HeadAmp6Pro the ultimate headphone monitoring and distribution system.

ART HeadAmp 6 Pro 6 Channel Headphone Amp Features:

• Six independent high-power amplifier channels
• Bass and treble EQ per channel
• Dual function pan/mix control per channel
• Stereo aux input for each channel
• Multiple monitoring settings per channel
• Precision eight-segment LED bargraph per channel
• Front panel main insert jack
• Front- and rear-mounted headphone jacks
• XLR and 1/4" main inputs and outputs
• Parallel main outputs for multiple unit use

Save BIG when you buy today!

Flexible signal routing and personalized headphone mixes for your studio!

The Behringer AMP800 MiniAMP Stereo Headphone Amplifier boasts 4 totally independent stereo high-power amplifier sections. You can use the phones level control plus the accurate 6-digit LED output meter per channel for easy level monitoring. There are 2 balanced stereo main inputs with independent Level and Balance controls for individual mixes, selectable for all 4 headphone amplifiers. An accurate 6-digit LED main input meter is provided for precise level indication of both line inputs. Dual headphone outputs on each channel on front and rear panel allow for connecting a total of 8 headphones at the same time. A parallel Link Output enables cascading several headphone amplifiers. Long-term reliability is guaranteed with the high-quality potentiometers and illuminated switches, and ultra low-noise audio operational amplifiers offer outstanding sound performance. In addition, all Mini Series Behringer audio processors can be stacked on top of each other to create an ultra-compact signal processing solution.

Behringer AMP800 MiniAMP 4-Channel Stereo Headphone Amplifier Specifications:

• INPUT
• Type 1/4" TRS connector, balanced
• Impedance approx. 20 kohms, balanced
• approx. 10 kohms, unbalanced
• CMRR 40 dB typ. @ 1 kHz
  
• PHONES OUT
• Type 1/4" TRS connector, stereo
• Impedance min. 100 ohms
• Max. output level +13 dBu @ 100 ohms load
  
• LINK OUT A
• Type 1/4" TRS connector, balanced
  
• SYSTEM SPECIFICATIONS
• Frequency response 10 Hz to 120 kHz, -3 dB
• Dynamic range 108 dB, 10 Hz to 22 kHz (100 ohms load)
• Distortion 0.007 % typ. (100 ohms load)
• Crosstalk < 80 dBu @ 1 kHz
• Signal-to-noise ratio 10 Hz to 22 kHz < 95 dB @ 0 dBu, a-weighted
  
• AMPLIFIER
• Max. output level +21 dBm / 124 mW (100 ohms load)
• Min. output impedance 47 ohms
  
• POWER SUPPLY
• Mains connection external power supply, 9 V~ / 750 mA
• Mains voltage
• USA/Canada 120 V~, 60 Hz
• U.K./Australia 240 V~, 50 Hz
• China 220 V~, 50 Hz
• Europe 230 V~, 50 Hz
• Japan 100 V~, 50 - 60 Hz
• Power consumption 11 W
  
• DIMENSIONS/WEIGHT
• Dimensions (H x W x D) approx. 1.89" (48 mm) x 9.55" (242.6 mm) x 4.72" (120 mm)
• Weight approx. 1.09 lbs. (0,495 kg )
  
• BEHRINGER constantly strives to maintain the highest quality standards. Modifications may be made, if necessary, without prior notice. The specifications and appearance of the equipment may therefore differ from those listed or illustrated.

Behringer AMP800 MiniAMP 4-Channel Stereo Headphone Amplifier Features:

• Ultra-compact 9.5" headphone amplifier system for studio and stage applications
• 4 totally independent stereo high-power amplifier sections
• Highest sonic quality with virtually all types of headphones even at maximum volume
• Phones Level control plus accurate 6-digit LED output meter per channel for easy level monitoring
• 2 balanced stereo main inputs with independent Level and Balance controls for individual mixes, selectable for all 4 headphone amplifiers
• Accurate 6-digit LED main input meter for precise level indication of both line inputs
• Dual headphone outputs on each channel on front and rear panels allow a total of 8 headphones to be connected at the same time
• Parallel Link Output allows cascading of several headphone amplifiers
• High-quality potentiometers and illuminated switches for long-term reliability
• Ultra low-noise audio operational amplifiers offer outstanding sound performance
• All Mini Series models can be stacked on top of each other to create an ultra-compact signal processor solution
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

Get this ultra-compact but ultra-flexible headphone amplifier system, and you will absolutely love it! Order today!

Give each performer their own monitor mix.

The Behringer Powerplay PRO-8 HA-8000 Headphone Amp is a professional, high-power multipurpose 8-channel headphone distribution amplifier. It features 8 totally independent stereo high-power amplifier sections in one rackspace, 2 separate main inputs, 2 headphone outputs per channel and even a dedicated direct input for each channel. It offers the highest sonic quality with virtually all types of headphones, even at maximum volume.

Behringer Powerplay PRO-8 HA-8000 Headphone Amp Features:

• 8-channel headphone distribution amplifier
• Eight totally independent stereo high-power amplifier sections
• 2 separate main inputs
• 2 headphone outputs per channel
• Dedicated direct input for each channel
• Highest sonic quality with virtually all types of headphones

Order today so all the studio cats can hear.

Give each performer their own monitor mix.

The Behringer Powerplay PRO-8 HA-8000 Headphone Amp is a professional, high-power multipurpose 8-channel headphone distribution amplifier. It features 8 totally independent stereo high-power amplifier sections in one rackspace, 2 separate main inputs, 2 headphone outputs per channel and even a dedicated direct input for each channel. It offers the highest sonic quality with virtually all types of headphones, even at maximum volume.

Behringer Powerplay PRO-8 HA-8000 Headphone Amp - Scratch 'n' Dent Features:

• 8-channel headphone distribution amplifier
• Eight totally independent stereo high-power amplifier sections
• 2 separate main inputs
• 2 headphone outputs per channel
• Dedicated direct input for each channel
• Highest sonic quality with virtually all types of headphones

Order today so all the studio cats can hear.

Hear it exactly the way you want to.

The Behringer POWERPLAY PRO-XL HA4700 is a headphone amp that makes a perfect addition to your studio setup. This professional headphone amp has 4 quiet, powerful channels that can drive loads down to 8 ohms and offer improved sound performance, comprehensive signal routing, and mixing functions. Each section offers mono/stereo operation, balancing, left/right mute, LED output meter, high and low EQ, balance and volume controls in one rack space. Servo-balanced, gold-plated XLR and 1/4" TRS I/O include 3 headphone outputs per channel, 2 XLR and 2 - 1/4" TRS inputs, and 2 XLR and 2 - 1/4" TRS outputs.

Behringer POWERPLAY PRO-XL HA4700 Headphone Amp Specifications:

• Frequency response: 10Hz - 150kHz, +/- 3dB
• Signal to noise: 22Hz to 22kHz >90dB @ 0dBu
• Dynamic range: 22Hz - 22kHz: 110dB
• THD: 0.006%

Behringer POWERPLAY PRO-XL HA4700 Headphone Amp Features:

• 4-channel headphone amplifier
• Independent amplifier sections with individual controls
• Aux input for each channel
• Stereo/mono operation
• High and low EQ
• LED output monitor
• Left/right mute
• One front and 2 rear 1/4" TRS outs
• I/O servo-balanced and gold-plated
• 2 XLR and 2 - 1/4" TRS inputs
• 2 XLR and 2 - 1/4" TRS outputs

Don't settle for hearing the music any other way than exactly how you like it. Order now.

Get the most out of your Pocket Rock-It.

Kit includes: stereo 1/8" to 1/4" conversion plug for plugging your 1/8" headphone plug into the Pocket Rock-It's 1/4" headphone in, 1/8" headphone splitter plug so 2 people can listen at once, and a 6' long 1/8" to 1/8" interconnect cable to connect your MP3 player or CD player for jamming along.

C Tech Pocket Rock-It Cable Kit Features:

• 1/8" female to 1/4" TRS male stereo adapter
• 1/8" stereo male to 1/8" stereo male 6' cable
• 1/8" stereo male to 2 - 1/8" stereo female adapter

Order today and get into all the great things you can do with your Pocket Rock-It.

The battery-powered Pocket Rock-It S1 Headphone Amp allows you to practice silently in any location, and to have great tones at your disposal. The rotating input plug has 90 degrees of motion, so the S1 headphone amp can plug into any guitar jack-no cable needed!

The Pocket Rock-It headphone amp gives you 1 clean and 2 dirty settings for lots of tonal versatility. The Filter control is a continuously variable EQ that adjusts high and mid-range frequencies of the amp emulation model selected.

If you do decide to let the rest of the world in on your Pocket Rock-it S1 sessions, use the line out for recording or preamp applications. Jam with your CDs or MP3s with the headphone amp's line in.

The C Tech Pocket Rock-It S1 is designed, developed and engineered in the USA.

C Tech Pocket Rock-It S1 Standard Guitar Headphone Amp Features:

• Instrument Input: 1/4" male plug T/S
• Instrument Impedance: 1.0 M ohms
• CD/Line in: 1/8" jack T/R/S
• Line input impedance: >100 K ohms
• Line level input: 1.0 volts RMS
• Headphone/Line out: 1/8" jack T/R/S
• Headphone/Line out load: 8 Ohms min
• Battery (Alkaline or rechargeable): 9V
• Approx. Battery life: 20-24 hours
• Size: 3.3" x 2.3" x 1.4"
• Filter Control: 12db Mid/High Adjust
• Processor: 16 bit
• Headphones (included): 32 ohm, 44mm driver

Plug in anywhere! Call or click today to order.

The battery-powered Pocket Rock-It S1b is a bass headphone amp that allows you to practice silently in any location, and have great tones at your disposal. The rotating input plug has 90 degrees of motion, so the S1b headphone amp can plug into any bass guitar jack - no cable needed!

With a "big" or "tite" setting, you'll always have the tone you need for the style you're playing. The Filter control is a continuously variable EQ that adjusts high and mid-range frequencies of the amp emulation model selected.

If you do decide to let the rest of the world in on your Poacket Rock-it S1b sessions, use the line out for recording or preamp applications. Jam with your CDs or MP3s with the bass Pocket Rock-It's line in.

the Pocket Rock-It S1b Bass Headphone Amplifier was designed, developed and engineered in the USA.

C Tech Pocket Rock-It S1b Standard Bass Headphone Amp Features:

• Instrument Input: 1/4" male plug T/S
• Instrument Impedance: 1.0 M ohms
• CD/Line in: 1/8" jack T/R/S
• Line input impedance: >100 K ohms
• Line level input: 1.0 volts RMS
• Headphone/Line out: 1/8" jack T/R/S
• Headphone/Line out load: 8 Ohms min
• Battery (Alkaline or rechargeable): 9V
• Approx. Battery life: 10-15 hours
• Size: 3.3" x 2.3" x 1.4"
• Filter Control: 12db Mid/High Adjust
• Processor: 16 bit
• Headphones (included): 32 ohm, 44mm driver

Plug in anywhere! Call or click today to order.

The battery-powered Pocket Rock-It V1 is a headphone amp for guitar that allows you to practice silently in any location, and to have great tones at your disposal. The rotating input plug has 90 degrees of motion, so the V1 headphone amp can plug into any guitar jack-no cable needed!

Two clean and two dirty settings, with separate effects for double and chorus give you tons of tone versatility. The Filter control is a continuously variable EQ that adjusts high and mid-range frequencies of the Pocket Rock-It amp emulation model selected.

If you do decide to let the rest of the world in on your Pocket Rock-It V1 sessions, use the line out for recording or preamp applications. Jam with your CDs or MP3s with the line in or connect two Pocket Rock-Its and jam with a buddy (adapters and cables included).

The Pocket Rock-It V1 Guitar Headphone Amplifier was designed, developed and engineered in the USA.

C Tech Pocket Rock-It V1 Guitar Headphone Amp Features:

• Instrument Input: 1/4" male plug T/S
• Instrument Impedance: 1.0 M ohms
• CD/Line in: 1/8" jack T/R/S
• Line input impedance: >100 K ohms
• Line level input: 1.0 volts RMS
• Headphone/Line out: 1/8" jack T/R/S
• Headphone/Line out load: 8 Ohms min
• Battery (Alkaline or rechargeable): 9V
• Approx. Battery life: 10-15 hours
• Size: 3.3" x 2.3" x 1.4"
• Filter Control: 12db Mid/High Adjust
• Processor: 16 bit
• Headphones (included): 32 ohm, 44mm driver
• Also included: Stereo 1/8" (male) to dual 1/8" (female) headphone splitter, Stereo 1/8" (male) to stereo 1/4" (female) adapter, Stereo 1/8" (male) to stereo 1/8" (male) cable (6' long), Mono 1/4" (female) to mono 1/4" (female) adapter.

Plug in anywhere! Call or click today to order.

The battery-powered Pocket Rock-It V1b Bass Headphone Amp allows you to practice silently in any location, and to have great tones at your disposal. The rotating input plug has 90 degrees of motion, so the V1 from C Tech can plug into any bass guitar jack-no cable needed!

The Pocket Rock-It Bass Headphone Amp's 2 "big" and 2 "tite" settings, with separate settings for active and passive pickup simulation give you tons of tone versatility. The Filter control is a continuously variable EQ that adjusts high and mid-range frequencies of the amp emulation model selected.

If you do decide to let the rest of the world in on your V1b headphone amp sessions, use the line out for recording or preamp applications. Jam with your CDs or MP3s with the line in or connect two Pocket Rock-Its and jam with a buddy (adapters and cables included).

The C Tech Pocket Rock-It V1b Bass Headphone Amp is designed, developed and engineered in the USA.

C Tech Pocket Rock-It V1b Bass Headphone Amp Features:

• Instrument Input: 1/4" male plug T/S
• Instrument Impedance: 1.0 M ohms
• CD/Line in: 1/8" jack T/R/S
• Line input impedance: >100 K ohms
• Line level input: 1.0 volts RMS
• Headphone/Line out: 1/8" jack T/R/S
• Headphone/Line out load: 8 Ohms min
• Battery (Alkaline or rechargeable): 9V
• Approx. Battery life: 10-15 hours
• Size: 3.3" x 2.3" x 1.4"
• Filter Control: 12db Mid/High Adjust
• Processor: 16 bit
• Headphones (included): 32 ohm, 44mm driver
• Also included: Stereo 1/8" (male) to dual 1/8" (female) headphone splitter, Stereo 1/8" (male) to stereo 1/4" (female) adapter, Stereo 1/8" (male) to stereo 1/8" (male) cable (6' long), Mono 1/4" (female) to mono 1/4" (female) adapter.

Plug in anywhere! Call or click today to order.

2-hour fast charge of 2 NiMh batteries.

Keep charged up so your Pocket Rocket is always ready. Order today.

Rechargeable batteries to power your Rockit and beyond.

These 8.4V Nimh rechargeable batteries are suitable for use in all 9V applications and feature a nominal capacity of 200mah. A flat discharge curve and high nominal voltage ensure that your sound will always remain consistent. Recharge with the C-Tech 9V Nimh Battery Charger.

A great choice for all for your audio needs. Click or call to order today!

The Pocket Rockit Gig bag is the perfect place to store and carry your Pocket Rockit headphone amp. It includes storage space for your Pocket Rockit, headphones, batteries, charger, and cables. There is even a place to store your extra strings.

Order today and have your Pocket Rockit in the bag.

The world's smallest full-featured guitar amp.

The C Tech V2 Pocket Rockit Headphone Amplifier captures the tonal heritage of 50 years of guitar amp design. It combines analog and digital signal processing to reproduce classic tube amp tones. A proprietary DSP engine provides awesome digital effects such as reverb, delay, chorus, and flange, while an analog front end generates classic amp emulation tones.

You don't even need a cable. Like all Pocket Rockit products, the V2 plugs directly into any guitar. Just plug it in, put on your headphones and you're ready to rock 'n' roll. You can even play along with your favorite CD. Best of all, the V2 sounds better than many full-blown amplifiers.

The C Tech V2's amp emulation circuitry models vintage and current classics. The Clean amp button scrolls through 3 clean or slightly over-driven tones. The Dirty amp button scrolls through 3 gnarly, positively nasty high-gain selections. Sounds reminiscent of classic Fender, Marshall, Soldano and other amps are at your fingertips.

This headphone amp has 2 independent DSP effect banks: a delay bank with straight delay, flange, and chorus: and a reverb bank that includes arena reverb, small-hall reverb, and an echo effect. Use any effect independently, or use one from each bank simultaneously.

A digital tuner features audible low-E, A, D, G, B and high-E notes. Tri-colored LED indicates flat, sharp, or in tune. It's a perfect tool for improving your ear. A built-in click track/metronome has a naturally- sampled snare drum hit - there's no annoying buzz or tone. The Pocket Rockit's metronome has adjustable tempos between 60 -180 bpm provides a great way to work on your time.

C Tech Pocket Rockit V2 Guitar Headphone Amplifier Features:

• Plugs directly into your guitar no cables
• Built-in tuner and metronome
• 2 DSP effects engines provide reverb, delay, chorus, and flange effects (2 simultaneous)
• Models of vintage and current amplifier classics
• Analog front end
• Rotating input plug design (fits any guitar)

Most importantly, the Pocket Rockit sounds killer! Order today and practice big.

The world's smallest full-featured guitar amp.

The C Tech V2 Pocket Rockit Headphone Amplifier captures the tonal heritage of 50 years of guitar amp design. It combines analog and digital signal processing to reproduce classic tube amp tones. A proprietary DSP engine provides awesome digital effects such as reverb, delay, chorus, and flange, while an analog front end generates classic amp emulation tones.

You don't even need a cable. Like all Pocket Rockit products, the V2 plugs directly into any guitar. Just plug it in, put on your headphones and you're ready to rock 'n' roll. You can even play along with your favorite CD. Best of all, the V2 sounds better than many full-blown amplifiers.

The C Tech V2's amp emulation circuitry models vintage and current classics. The Clean amp button scrolls through 3 clean or slightly over-driven tones. The Dirty amp button scrolls through 3 gnarly, positively nasty high-gain selections. Sounds reminiscent of classic Fender, Marshall, Soldano and other amps are at your fingertips.

This headphone amp has 2 independent DSP effect banks: a delay bank with straight delay, flange, and chorus: and a reverb bank that includes arena reverb, small-hall reverb, and an echo effect. Use any effect independently, or use one from each bank simultaneously.

A digital tuner features audible low-E, A, D, G, B and high-E notes. Tri-colored LED indicates flat, sharp, or in tune. It's a perfect tool for improving your ear. A built-in click track/metronome has a naturally- sampled snare drum hit - there's no annoying buzz or tone. The Pocket Rockit's metronome has adjustable tempos between 60 -180 bpm provides a great way to work on your time.

C Tech Pocket Rockit V2 Guitar Headphone Amplifier - Scratch 'n' Dent Features:

• Plugs directly into your guitar no cables
• Built-in tuner and metronome
• 2 DSP effects engines provide reverb, delay, chorus, and flange effects (2 simultaneous)
• Models of vintage and current amplifier classics
• Analog front end
• Rotating input plug design (fits any guitar)

Most importantly, the Pocket Rockit sounds killer! Order today and practice big.

Expandable four-channel headphone amplifier with built-in talkback feature.

The Matrix Y by CME is a 4-channel headphone amplifier for your home project studio. It's also got a unique talkback function that and an extra set of outputs so you can stack multiple units to expand your system.

Each of the headphone outputs have their own individual level control so everyone in the studio sets the perfect listening volume for themselves. So what do you do if you have more than 4 people in your band or classroom? No problem because the Line Outputs on one Matrix Y can be connected to the Line Ins on another expanding your headphone system in groups of 4.

The unique built-in talkback Mic allows for easy communication between everyone wearing headphones. Simply push the talkback button and every one can hear you clearly because the Line In signal is automatically attenuated by 20 dB. No more pulling the headphones off after every take or talking too loud because you can't hear yourself ! This simple to use yet powerful feature also make the Matrix Y a must have in many situations beside recording for example enjoying your favorite music together, band rehearsals or group lesson class room situations.

Anytime people need to listen to audio over headphones and still communicate with each other, the Matrix Y is the perfect solution.

CME Audio Matrix System 4-Channel Headphone Amp Specifications:

• Frequency response: 20Hz~20kHz +0.05dB, -0.35dB
• Noise level: -94.8dB
• Dynamic range: 94.7dB
• THD: 0.0028%
• IMD + Noise: 0.0069%
• Stereo crosstalk: -95.7dB
• IMD at 10 kHz: 0.027%

CME Audio Matrix System 4-Channel Headphone Amp Features:

• High quality 4-channel powerful headphone amplifier
• Built-in professional talkback microphone
• Balanced stereo inputs and outputs for connections to external equipment and system expansion
• 4 x TRS (1/4") headphone jacks with powerful headphone amplifier for headphone at all impedance
• 4 separate headphone level knobs
• 1 talkback switcher, 1 LED indicator, when talkback is on the signal at line-in will be attenuated by 20dB
• 2 x TRS (1/4") line inputs, automatically compatible with balanced/unbalanced source (+4dB/-10dB), for external audio source
• 2 x TRS (1/4") line outputs, automatically compatible with balanced/unbalanced source (+4dB/-10dB), for external audio connection like monitor speakers
  
  

Now you can have cue mix monitoring and talkback without having to buy a separate monitor management system.

Retro styling and vintage tone in a mini amp!

This little hot rod can crank and has a great clean or overdriven sound. Also features a real leather handle, belt clip, headphone jack, volume, tone, and overdrive controls. Powered by 9-volt battery (included) or a Danelectro DA-1 adapter.

Danelectro Honeytone N-10 Guitar Mini Amp Features:

• Great clean and overdrive tones
• Leather handle
• Belt clip
• Headphone jack
• Volume, tone, and overdrive

It's dinky, but it ain't wimpy! Order yours today.

Practice so quietly only you will know how good you're getting.

The Dean Bass in a Box Bass Headphone Amp lets you plug in your bass, put on the headphones, and start playing. You'll hear the coolest, punchiest bass tones you've ever heard. Has a flat/normal/bright selector.

Dean Bass in a Box Bass Headphone Amplifier Features:

• Includes headphones
• Has flat/normal/bright selector

This is the least costly way in the world to get great bass tone. Order today.

Amazingly loud and cool-sounding little practice amp that clips on your belt.

Blasting overdrive sounds like a micro wall of amps. Ported cab, 3W peak power, distortion switch, volume and tone controls, headphone jack, LED power indicator, and DC adapter jack make it loads of fun.

Dean Markley GT1000 Micro Amp Features:

• Fantastic overdrive tone
• High-efficiency 3" speaker
• Ported cabinet
• 3 watts peak power
• Distortion switch
• Volume control
• Tone control
• Headphone jack
• LED power indicator
• On/off switch
• Input jack
• DC adapter jack
• Belt clip

Is this cool or what? Chuck it in the cart, you'll have a blast with it.