The thunderous voice of millions of players.

When music store owner and drum teacher Jim Marshall set to work designing an amp to realize the musical vision of local guitarists, he laid the very foundations of rock music. After playing the sixth prototype of 'Number 1', which would later become the JTM45, Jim said, "That's it! That's going to be the Marshall sound from now on!" And so it was. Since the 1960s Marshall amps have been the first choice of rock's greatest guitarists.

The entire Jim Marshall story is told in the authorized biography Jim Marshall: The Father of Loud, by Rich Maloof (published by Backbeat Books), which features a foreword written by guitar hero and personal friend of Jim's — Slash. The tale is a captivating one, broken down into 2 main parts. The first section traces Jim's story from childhood as a young boy diagnosed with a rare bone disease to his stage success as a singer and big-band drummer, onto the development of the iconic Marshall stack and Marshall's rise to prominence in the amplifier industry. It profiles a man dedicated to listening to his customers and inventing new ways of satisfying them, constantly improving and fine-tuning his designs and, from the beginning, a believer in the value of teamwork.

The second half of the book delves into the amplifiers themselves, including a well-illustrated section on amp anatomy, with inside shots of the amps, plus a Top 11 list of Jim's favorite models over the years. There's a tour of the factory, a fascinating collection of comments from Marshall owners, detailed rig diagrams of 6 Marshall greats from the 1960s to the 2000s, and other Marshallabilia that will please Marshall owners and guitarists of all ages. There's also a view of Marshall in the 21st century, and an appendix on dating Marshall amps by serial number.

Now in his eighth decade, Jim is still pursuing his goal of bringing musical visions to life, on a worldwide scale. This book honors the man and encourages the reader to do the same - most importantly, by pursuing their own musical dreams.

Marshall Jim Marshall - The Father of Loud Book Features:

• 200 pages
• 7" x 9"
• Cloth bound

Order now and get to know one of the electric guitarists' best friends.

The amp that started it all!

The Marshall JTM45 Amp Head is a lovingly created reproduction of Jim Marshall's first amplifier. Now the classic JTM45 is accessible to all who enjoy its glassy, clean tone and fluid, warm sustain.

By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45's glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smolder beneath every note you play.

Marshall JTM45 Amp Head Specifications:

• Output (RMS): 30 watts
• Preamp valves: 3 x ECC83
• Power amp valves: 2 x 5881
• GZ34 valve rectifier
• 3-band EQ
• Presence control
• Dimensions: 26"W x 10-1/4"H x 8"D
• Weight: 32 lbs.

Marshall JTM45 Amp Head Features:

• 30W head
• Clean tone
• Warm sustain
• Classic design

Buy the JTM45 TODAY, and relive the magic of your youth!

The amp that started it all!

This half stack includes the Marshall JTM45 Amp Head and Marshall 1960AX or 1960BX 100W 4x12 Guitar Extension Cabinet.

Marshall JTM45 Amplifier Head
The Marshall JTM45 Amp Head is a lovingly created reproduction of Jim Marshall's first amplifier. Now the classic JTM45 is accessible to all who enjoy its glassy, clean tone and fluid, warm sustain.

By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45's glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smolder beneath every note you play.

Marshall 1960AX or 1960BX 100W 4x12 Guitar Extension Cabinet
The Marshall 1960X consists of 4 separate birch ply speaker enclosures, each loaded with a Celestion G12M Greenback 12" speaker and has a 100W power handling rating. Tonally this speaker cabinet falls between the 1960A's brightness and the 1960TV's warmth. Greenback G12M speakers have a very distinctive sound with a fast, snappy response that adds detail and dynamics to both clean and distorted playing. The 1960X Extension Speaker Cabinet uses the early '70s LC checkered grille cloth and a less-textured vinyl covering. If used as a half stack with a 100W head, a power brake is recommended.

Marshall JTM45 and 1960AX or 1960BX Half Stack Features:

• Marshall JTM45 Amp Head
• 30W head
• Clean tone
• Warm sustain
• Classic design
• Output (RMS): 30 watts
• Preamp valves: 3 x ECC83
• Power amp valves: 2 x 5881
• GZ34 valve rectifier
• 3-band EQ
• Presence control
• Dimensions: 26"W x 10-1/4"H x 8"D
• Weight: 32 lbs.
  
  Marshall 1960AX or 1960BX 100W 4x12 Guitar Extension Cabinet
• 4 - 12" Celestion Greenback G12M speakers
• 100W handling
• Checkered grille cloth
• Straight or Angled front
• 100 lbs

Buy the JTM45 Half Stack TODAY, and relive the magic of your youth!

A rig powered by Jim Marshall's original head design!

Marshall JTM45 Amp Head
A lovingly created reproduction of Jim Marshall's first amplifier. Now the classic JTM45 is accessible to all who enjoy its glassy, clean tone and fluid, warm sustain.
By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45's glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smolder beneath every note you play.

Marshall 1960TV Cabinet
Has an angled front; four 12" Greenback speakers; and a warmer, thicker sound than the 1960A. This 100W, mono, 16-ohm cabinet is 3 inches taller than a standard 1960A 4x12 cabinet which results in well defined mid range and a lowered resonant frequency for more prominent lows. The 25W Greenbacks are less in your face than the 75W Celestions in the 1960A. Although not a reissue-it was never offered in the past-this cab recreates the classic look and tones of yesteryear.

Marshall JTM45 and 1960TV Half Stack Specifications:

• Marshall JTM45 Amp Head
• Output (RMS): 30 watts
• Preamp valves: 3 x ECC83
• Power amp valves: 2 x 5881
• GZ34 valve rectifier
• 3-band EQ
• Presence control
• 26"W x 10-1/4"H x 8"D
• 32 lbs.
  
  Marshall 1960TV Cabinet
• Handles 100W
• 16 ohms
• 29-3/5"W x 35-1/2"H x 14-4/5"D
• 97 lbs.

Marshall JTM45 and 1960TV Half Stack Features:

• Marshall JTM45 Amp Head
• 30W head
• Clean tone
• Warm sustain
• Classic design
  
  Marshall 1960TV Cabinet
• Angled front
• Four 12" 25W Greenback speakers for warmer, thicker sound than the 1960A
• Original grille cloth
• 3" taller than standard 4x12 cabs

Get the sound that launched a thousand rock hits! Order with the protection of our 45-day lowest price and total satisfaction guarantees!

A fire-breathing stack based on Jim Marshall's first amp!

This full stack includes one JTM45 amp head, one 1960AX angled guitar extension cab, and one 1960BX straight guitar extension cab.

Marshall JTM45 Amp Head
A lovingly created reproduction of Jim Marshall's first amplifier. Now the classic JTM45 amplifier head is accessible to all who enjoy its glassy, clean tone and fluid, warm sustain.


By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45's glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smolder beneath every note you play.

Marshall 1960AX & 1960BX 100W 4x12 Guitar Extension Cabinets
Each speaker cab consists of 4 separate birch ply enclosures, each loaded with a Celestion G12M Greenback 12" speaker and has a 100W power handling rating. Tonally, these speaker cabinets fall between the 1960A's brightness and the 1960TV's warmth. Greenback G12M speakers have a very distinctive sound with a fast, snappy response that adds detail and dynamics to both clean and distorted playing. These cabinets use the early '70s LC checkered grille cloths and a less-textured vinyl covering.

Marshall JTM45, 1960AX and 1960BX Full Stack Specifications:

• Marshall JTM45 Amp Head
• Output (RMS): 30 watts
• Preamp valves: 3 x ECC83
• Power amp valves: 2 x 5881
• GZ34 valve rectifier
• 3-band EQ
• Presence control
• Dimensions: 26"W x 10-1/4"H x 8"D
• Weight: 32 lbs.
  
  

Marshall JTM45, 1960AX and 1960BX Full Stack Features:

• Marshall JTM45 Amp Head
• 30W head
• Clean tone
• Warm sustain
• Classic design
  
  Marshall 1960AX & 1960BX 100W 4x12 Guitar Extension Cabinets
• Four 12" Celestion Greenback G12M speakers
• each
• 100W handling
• Checkered grille cloths
• 100 lbs. each

Crave real British tube sound? Here's the rig that'll scratch your itch. Order today with the protection of our 45-day lowest price and total satisfaction guarantees!

In a nutshell, the Marshall all-valve, 2-channel JVM205C 50-Watt tube combo amp is a 2-channel version of the most versatile Marshall amplifier ever made. Each of this combo amp's 2 channels are completely independent of each other, and they boast 3 Modes, all 6 of which are footswitchable and feature their own unique gain structure. It makes the JVM 2-channel effectively 6 Marshalls in one!

The JVM205C has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

An ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 4-way footswitch boasts LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM205C all-valve combo amp will give you whatever tone you need right when you need it.

Marshall JVM Series JVM205C 50W 2x12 Tube Combo Amp Specifications:

• 27" x 20" x 10.5" (690x510x265mm)
• 65 lbs. (29.5kg)

Marshall JVM Series JVM205C 50W 2x12 Tube Combo Amp Features:

• 50W power
• All-valve, with 5 x ECC83s, and 2 x EL34s
• 1x Vintage 12" + 1x Heritage 12" Speaker
• 2 totally independent, footswitchable channels
• Each channel has 3 footswitchable modes
• Footswitchable, studio-quality digital reverb
• Independent reverb controls for each channel
• 2 footswitchable master volumes
• 2 FX loops, one series, and one parallel
• Parallel FX loop is footswitchable on/off
• Speaker emulated XLR output
• 4-way footswitch (with memory) supplied
• All switching can be done via MIDI
• Made in England

Order today and rock Marshall style.

A 2-channel, 50W version of the JVM410H Head

In a nutshell, the Marshall all-valve, 2-channel JVM205H 50W tube head is a 2-channel, 50W version of the most versatile Marshall amplifier ever made, the JVM410H. Each of its 2 channels are completely independent of each other, and they boast 3 Modes, all 6 of which are footswitchable and feature their own unique gain structure. It makes the JVM 2-channel effectively 6 Marshalls in one!

The JVM205H has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

An ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 4-way footswitch boasts LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM205H all-valve amp head will give you whatever tone you need right when you need it.

Marshall JVM Series JVM205H 50W Tube Guitar Amp Head Features:

• 50W power
• All-valve, with 5 x
• 12AX7s and 2 x EL34s
• 2 totally independent, footswitchable channels
• Each channel has 3 footswitchable modes
• Footswitchable, studio-quality digital reverb
• Independent reverb controls for each channel
• 2 footswitchable master volumes
• 2 FX loops, one series, and one parallel
• Parallel FX loop is footswitchable on/off
• Speaker emulated XLR output
• 4-way footswitch (with memory) supplied
• All switching can be done via MIDI
• Made in England

Order today and rock Marshall style.

A 2-channel version of the JVM410C Combo

In a nutshell, the Marshall all-valve, 2-channel JVM210C combo is a 2-channel version of the most versatile Marshall amplifier ever made, the JVM410C. It also boasts more gain than any other Marshall to date-and that's really saying something!

Each of its 2 channels are completely independent of each other, and they boast 3 Modes, all 6 of which are footswitchable and feature their own unique gain structure. It makes the JVM 2-channel effectively 6 Marshalls in one!

The JVM210C has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

An ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 4-way footswitch boasts LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM210C all-valve combo will give you whatever tone you need right when you need it.

Marshall JVM Series JVM210C 100W 2x12 Tube Combo Amp Features:

• 100W power
• All-valve, with 5 x
• 12AX7s and 4 x EL34s
• 2 x 12" Celestion speakers
• 2 totally independent, footswitchable channels
• Each channel has 3 footswitchable modes
• Footswitchable, studio-quality digital reverb
• Independent reverb controls for each channel
• 2 footswitchable master volumes
• 2 FX loops, one series, and one parallel
• Parallel FX loop is footswitchable on/off
• Speaker emulated XLR output
• 4-way footswitch (with memory) supplied
• All switching can be done via MIDI
• Made in England

Order today and rock Marshall style.

A 2-channel version of the JVM410C Combo

In a nutshell, the Marshall all-valve, 2-channel JVM210C combo is a 2-channel version of the most versatile Marshall amplifier ever made, the JVM410C. It also boasts more gain than any other Marshall to date-and that's really saying something!

Each of its 2 channels are completely independent of each other, and they boast 3 Modes, all 6 of which are footswitchable and feature their own unique gain structure. It makes the JVM 2-channel effectively 6 Marshalls in one!

The JVM210C has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

An ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 4-way footswitch boasts LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM210C all-valve combo will give you whatever tone you need right when you need it.

Marshall JVM Series JVM210C 100W 2x12 Tube Combo Amp - Scratch 'n' Dent As Is Features:

• 100W power
• All-valve, with 5 x
• 12AX7s and 4 x EL34s
• 2 x 12" Celestion speakers
• 2 totally independent, footswitchable channels
• Each channel has 3 footswitchable modes
• Footswitchable, studio-quality digital reverb
• Independent reverb controls for each channel
• 2 footswitchable master volumes
• 2 FX loops, one series, and one parallel
• Parallel FX loop is footswitchable on/off
• Speaker emulated XLR output
• 4-way footswitch (with memory) supplied
• All switching can be done via MIDI
• Made in England

Order today and rock Marshall style.

A 2-channel addition to Marshall's flagship series.

In a nutshell, the Marshall all-valve, 2-channel JVM210H 100-Watt tube head is a 2-channel version of the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall to date-and that's really saying something!

Each of its 2 channels are completely independent of each other, and they boast 3 Modes, all 6 of which are footswitchable and feature their own unique gain structure. It makes the JVM 2-channel effectively 6 Marshalls in one!

The JVM210H has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

An ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 4-way footswitch boasts LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM210H all-valve amp head will give you whatever tone you need right when you need it.

Marshall JVM Series JVM210H 100W Tube Guitar Amp Head Features:

• 100W power
• All-valve, with 5 x
• 12AX7s and 4 x EL34s
• 2 totally independent, footswitchable channels
• Each channel has 3 footswitchable modes
• Footswitchable, studio-quality digital reverb
• Independent reverb controls for each channel
• 2 footswitchable master volumes
• 2 FX loops, one series, and one parallel
• Parallel FX loop is footswitchable on/off
• Speaker emulated XLR output
• 4-way footswitch (with memory) supplied
• All switching can be done via MIDI
• Made in England

Order today and rock Marshall style.

A 2-channel, 50W version of the JVM410C Combo

In a nutshell, the Marshall all-valve, 2-channel JVM215C is a 2-channel, 50W version of the most versatile Marshall amplifier ever made, the JVM410C. Each of its 2 channels are completely independent of each other, and they boast 3 Modes, all 6 of which are footswitchable and feature their own unique gain structure. It makes the JVM 2-channel effectively 6 Marshalls in one!

The JVM215C has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

An ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 4-way footswitch boasts LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM215C all-valve combo will give you whatever tone you need right when you need it.

Marshall JVM Series JVM215C 50W 1x12 Tube Combo Amp Features:

• 50W power
• All-valve, with 5 x
• 12AX7s and 2 x EL34s
• 12" Celestion speaker
• 2 totally independent, footswitchable channels
• Each channel has 3 footswitchable modes
• Footswitchable, studio-quality digital reverb
• Independent reverb controls for each channel
• 2 footswitchable master volumes
• 2 FX loops, one series, and one parallel
• Parallel FX loop is footswitchable on/off
• Speaker emulated XLR output
• 4-way footswitch (with memory) supplied
• All switching can be done via MIDI
• Made in England

Order today and rock Marshall style.

A 2-channel, 50W version of the JVM410C Combo

In a nutshell, the Marshall all-valve, 2-channel JVM215C is a 2-channel, 50W version of the most versatile Marshall amplifier ever made, the JVM410C. Each of its 2 channels are completely independent of each other, and they boast 3 Modes, all 6 of which are footswitchable and feature their own unique gain structure. It makes the JVM 2-channel effectively 6 Marshalls in one!

The JVM215C has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

An ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 4-way footswitch boasts LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM215C all-valve combo will give you whatever tone you need right when you need it.

Marshall JVM Series JVM215C 50W 1x12 Tube Combo Amp - Scratch 'n' Dent As Is Features:

• 50W power
• All-valve, with 5 x
• 12AX7s and 2 x EL34s
• 12" Celestion speaker
• 2 totally independent, footswitchable channels
• Each channel has 3 footswitchable modes
• Footswitchable, studio-quality digital reverb
• Independent reverb controls for each channel
• 2 footswitchable master volumes
• 2 FX loops, one series, and one parallel
• Parallel FX loop is footswitchable on/off
• Speaker emulated XLR output
• 4-way footswitch (with memory) supplied
• All switching can be done via MIDI
• Made in England

Order today and rock Marshall style.

The most versatile Marshall ever.

In a nutshell, the Marshall all-valve, 4-channel JVM410C 100-Watt, 2x12" combo is the most versatile Marshall amplifier ever made. It also boasts more Gain than any other Marshall to date and that's really saying something!!

Each of its 4-channels Clean, Crunch, OD1 & OD2 are not only completely independent of each other, they all boast three Modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshalls in one!

The JVM410C has built-in, studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to controls Volume, Bass, Middle, Treble & Gain accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls 2 master volumes plus Resonance and Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410C all-valve combo amp will give you whatever tone you need right when you need it.

Marshall JVM Series JVM410C Tube Combo Amp Features:

• 100-Watt valve, 2x12" combo
• Celestion 12" speakers
• Valve compliment: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable Digital Reverb with level controls for all 4 channels.
• 2 footswitchable Master Volumes
• Two FX loops Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England

Call or click today to order with the assurance of Dual Guarantees. You've gotta love it and get the best deal going, or your money back.

The most versatile Marshall ever.

In a nutshell, the Marshall all-valve, 4-channel JVM410C 100-Watt, 2x12" combo is the most versatile Marshall amplifier ever made. It also boasts more Gain than any other Marshall to date and that's really saying something!!

Each of its 4-channels Clean, Crunch, OD1 & OD2 are not only completely independent of each other, they all boast three Modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshalls in one!

The JVM410C has built-in, studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to controls Volume, Bass, Middle, Treble & Gain accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls 2 master volumes plus Resonance and Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410C all-valve combo amp will give you whatever tone you need right when you need it.

Marshall JVM Series JVM410C Tube Combo Amp - Scratch 'n' Dent As Is Features:

• 100-Watt valve, 2x12" combo
• Celestion 12" speakers
• Valve compliment: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable Digital Reverb with level controls for all 4 channels.
• 2 footswitchable Master Volumes
• Two FX loops Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England

Call or click today to order with the assurance of Dual Guarantees. You've gotta love it and get the best deal going, or your money back.

More channels, more gain, more versatility.

There's nothing to lose and a lot of gain with this Marshall JVM410H Tube Amp Head and 1936 2 x 12 Half Stack kit, a foot-stomping deal if there ever was one.

JVM410H Tube Amp Head
In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-Watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall to date-and that's really saying something!

Each of its 4 channels Clean, Crunch, OD1 & OD2 are not only completely independent of each other, they all boast 3 Modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshall amps in one!

The JVM410H has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to controls Volume, Bass, Middle, Treble & Gain-accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls-2 Master Volumes plus Resonance & Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410H all-valve amp head will give you whatever tone you need right when you need it.

1936 2x12 Cabinet
The Marshall 1936 2x12 Cabinet has two 12" Celestion G12T75 speakers to handle 150W. Size matches full-size Marshall heads. Offers mono or stereo option (eight ohms mono; sixteen ohms stereo). Marshall constructs the 1936 Speaker Cabinet with locking joints; smooth ABS plastic corners; and heavy-duty, ergonomically recessed grab handles.

Marshall JVM Series JVM410H and 1936 2x12 Half Stack Features:

• JVM410H Tube Amp Head
• 100-Watt valve head
• Valve complement: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels-Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable digital reverb with level controls for all 4 channels.
• 2 footswitchable master volumes
• Two FX loops-Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England
  
  1936 2x12 Cabinet
• Two 12" Celestion G12T75 speakers
• 150W handling
• Mono or stereo option
• Size matches full-size heads

Order today with the protection of our 45-day lowest price and total satisfaction guarantees!

JVM410H Tube Amp Head

In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall guitar amp head to date-and that's really saying something.

Each of its 4 channels-Clean, Crunch, OD1 & OD2-are not only completely independent of each other, they all boast 3 modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshalls in one.

The JVM410H amp head has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to control-Volume, Bass, Middle, Treble & Gain-accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls-2 Master Volumes plus Resonance & Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amplifier's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410H all-valve guitar amp head will give you whatever tone you need right when you need it.

1960A and 1960B 300W 4x12 Guitar Extension Cabinet

The Marshall 1960 Speaker Cabinet puts out beautiful tone at any volume. The addition of an impedance (4 or 16 ohm) mono/stereo switching mechanism has transformed the "industry standard" 1960 into the ultimate speaker cab. These 300W Marshall speaker cabinets are loaded with Celestion Vintage speakers. The 1960A cab is angled. The 1960B cab is straight.

Marshall JVM Series JVM410H and 1960A or 1960B Half Stack Features:

• Head:
• 100-watt valve head
• Valve complement: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable digital reverb with level controls for all 4 channels.
• 2 footswitchable master volumes
• Two FX loops Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England
  
  Cabinet:
• Speaker type: Celestion G12T-75W
• Speaker configuration: 4x12"
• Power (RMS): 300W
• Selectable mono/stereo: Yes
• Impedance stereo/mono: 8 Ohm, 16/4 Ohm
• 30"W x 32-3/4"H x 14-1/4"D
• 82 lbs.

Save BIG when you buy today!

More channels, more gain, more versatility.

This half stack includes the Marshall JVM410H Tube Amp Head and 1960V Vintage Speaker Cabinet.

JVM410H Tube Amp Head
In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-Watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall to date and that's really saying something!

Each of its 4 channels Clean, Crunch, OD1 & OD2 are not only completely independent of each other, they all boast 3 Modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshalls in one!

The JVM410H amp head has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to controls Volume, Bass, Middle, Treble & Gain accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls 2 Master Volumes plus Resonance & Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410H all-valve amp head will give you whatever tone you need right when you need it.

1960V Vintage Speaker Cabinet
The Marshall 1960V Vintage Speaker Cabinet puts out beautiful tone at any volume. The addition of an impedance (4 or 16 ohm) mono/stereo switching mechanism has transformed the "industry standard" 1960 into the ultimate speaker cab. This 280W Marshall cab is loaded with Celestion Vintage 30 speakers.

Marshall JVM Series JVM410H and 1960AV or 1960BV Half Stack Features:

• JVM410H Tube Amp Head
• 
  
• 100-Watt valve head
• Valve complement: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable digital reverb with level controls for all 4 channels.
• 2 footswitchable master volumes
• Two FX loops Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England
  
  1960V Vintage Speaker Cabinet
  
• 280W handling
• 4 - 12" Celestion Vintage 30 speakers
• Impedance (4 or 16 ohm) and mono/stereo switching

No backline would be complete without the legendary Marshall head and 4x12 cab. Order now.

More channels, more gain, more versatility.

In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-Watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall to date-and that's really saying something!

Each of its 4 channels-Clean, Crunch, OD1 & OD2 are not only completely independent of each other, they all boast 3 Modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshalls in one!

The JVM410H has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to controls Volume, Bass, Middle, Treble & Gain-accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls-2 Master Volumes plus Resonance & Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410H all-valve amp head will give you whatever tone you need right when you need it.

Marshall JVM Series JVM410H Tube Amp Head Features:

• 100-Watt valve head
• Valve complement: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels-Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable digital reverb with level controls for all 4 channels.
• 2 footswitchable master volumes
• Two FX loops Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England

Call or click today to order.

Superb construction, sound, and features.

This Marshall full stack includes one JVM410H Tube Amp Head and a 1960A angled cab with a 1960B straight cab for some serious stage presence.

JVM410H Tube Amp Head
In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-Watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall to date-and that's really saying something!

Each of its 4 channels Clean, Crunch, OD1 & OD2 are not only completely independent of each other, they all boast 3 Modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshalls in one!

The JVM410H amp head has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to controls Volume, Bass, Middle, Treble & Gain-accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls-2 Master Volumes plus Resonance & Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410H all-valve amp head will give you whatever tone you need right when you need it.

1960A and 1960B 300W 4x12 Guitar Extension Cabinet
The Marshall 1960 Speaker Cabinet puts out beautiful tone at any volume. The addition of an impedance (4 or 16 ohm) mono/stereo switching mechanism has transformed the "industry standard" 1960 into the ultimate speaker cab. These 280W Marshall cabs are loaded with Celestion Vintage speakers. The bottom cabinet is traditionally square-shaped with casters while the top speaker has an angled front.

Marshall JVM Series JVM410H, 1960A and 1960B Full Stack Specifications:

• 1960A and 1960B 300W 4x12 Guitar Extension Cabinet
• \Speaker Type: Celestion G12T-75W
• Speaker Configuration: 4 x12
• Power (RMS): 300W
• Selectable Mono/Stereo: Yes
• Impedance Stereo/Mono: 8 ohm, 16/4 ohm
• 30"W x 32-3/4"H x 14-1/4"D
• 82 lbs.

Marshall JVM Series JVM410H, 1960A and 1960B Full Stack Features:

• JVM410H Tube Amp Head
• 100-Watt valve head
• Valve complement: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels-Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable digital reverb with level controls for all 4 channels.
• 2 footswitchable master volumes
• Two FX loops-Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England
  
  1960A or 1960B 300W 4x12 Guitar Extension Cabinets
• Bottom cabinet is square with caster wheels
• Top cabinet's front angles back and rests on on top of other cabinet.

Get a start on a super stack. Order today.

A rock standard, now with impedance switching!

Get more punch and crunch with this Marshall full stack featuring a JVM410H Tube Amp Head with a 1960AV/1960BV Full Stack.

JVM410H Tube Amp Head
In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-Watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall to date-and that's really saying something!

Each of its 4 channels Clean, Crunch, OD1 & OD2 are not only completely independent of each other, they all boast 3 Modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshalls in one!

The JVM410H amp head has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to controls Volume, Bass, Middle, Treble & Gain-accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls-2 Master Volumes plus Resonance & Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410H all-valve amp head will give you whatever tone you need right when you need it.JVM410H Tube Amp Head
In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-Watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall to date-and that's really saying something!

1960AV and 1960BV 280W 4x12 Guitar Extension Cabinet
The Marshall 1960V Vintage Speaker Cabinet puts out beautiful tone at any volume. The addition of an impedance (4 or 16 ohm) mono/stereo switching mechanism has transformed the "industry standard" 1960 into the ultimate speaker cab. This 280W Marshall cab is loaded with Celestion Vintage 30 speakers.

Marshall JVM Series JVM410H, 1960AV and 1960BV Full Stack Specifications:

• 1960AV and 1960BV 280W 4x12 Guitar Extension Cabinet
• 280W handling
• 4 x 12" Celestion Vintage 30 speakers
• Impedance (4 or 16 ohm) And mono/stereo switching

Marshall JVM Series JVM410H, 1960AV and 1960BV Full Stack Features:

• JVM410H Tube Amp Head
• 100-Watt valve head
• Valve complement: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels-Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable digital reverb with level controls for all 4 channels.
• 2 footswitchable master volumes
• Two FX loops-Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England
  
  1960AV and 1960BV 280W 4x12 Guitar Extension Cabinet
• Bottom cabinet has casters and straight front
• Top cab easily stacks on top and has an angled front

No backline would be complete without the legendary Marshall 4x12 cab. Order now.