You can take Marshall tone and vibe with you with the Marshall MS-2 Mini Amp. Classic Marshall grille cloth; crunchy distortion; and plenty of volume for good, clean fun. Controls for overdrive, tone, and volume. Powered by one 9V battery. The Marshall MS-2 Mini Amp includes belt clip and headphone jack. 5-3/4" high.

Marshall MS-2 Mini Amp Features:

• Authentic Marshall look
• Crankin' overdrive
• Tone and volume controls
• Headphone jack

Don't leave home without your Marshall, make it yours!

The Marshall MS-4 Micro Stack features 2 speaker cabs with a head, and it stands only 9-3/4" high. Includes fully functioning Gain, Volume, and Tone controls. The Marshall Micro Stack is powered by a 9V battery.

Marshall MS-4 Micro Stack Features:

• Smokin' stack design
• Screamin' stack sound
• Functional gain, volume, and tone controls

Here's a stack you don't need two roadies to carry. Put it in the cart.

The Marshall MS-4 Micro Stack features 2 speaker cabs with a head, and it stands only 9-3/4" high. Includes fully functioning Gain, Volume, and Tone controls. The Marshall Micro Stack is powered by a 9V battery.

Marshall MS-4 Micro Stack - Scratch 'n' Dent As Is Features:

• Smokin' stack design
• Screamin' stack sound
• Functional gain, volume, and tone controls

Here's a stack you don't need two roadies to carry. Put it in the cart.

The Tube Head Tote is a padded bag emblazoned with the Marshall logo and features dual carry handles plus a zippered outer accessory pocket.

Click or call now to order.

Built as only Marshall know how, the VBC810 bass cabinet features one piece construction to give extra strength and minimize the possibility of any unwanted cabinet rattle. These speaker cabs also have sound absorbent padding to damp internal resonances. Internal partitioning further damps resonance and aids smooth performance. The custom designed loudspeakers have been specially selected to handle the power of the VBA400 amplifier and will give superb professional performance.

Marshall VBC810 8X10" Bass Speaker Cabinet Features:

• Heavy-duty one-piece construction
• Internal partitioning
• Internal sound absorbent padding
• Custom designed high performance loudspeakers
• Removable front baffles
• High quality fittings and hardware

Get the right bass cabinet for the right sound and response - order now!

This half stack includes the Marshall Vintage Modern 2266 Tube Amp Head and Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet.

Marshall Vintage Modern 2266 Tube Amplifier Head
The Marshall Vintage Modern 2266 50 Watt Head is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effect to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.

The cosmetics on the Marshall 2266 amp head are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet
The Marshall Vintage Modern 425A angled cab and 425B straight guitar speaker extension cabinets are traditional Marshall 4 x 12 speaker cabs in design. These cabs are mono/stereo switchable and are loaded with G12C 25 Watt Celestion Greenbacks. These were specifically developed for the Limited Edition Jimi Hendrix Super100JH stack and are voiced to give that rich and balanced harmonic timbre that complements vintage tone and the Vintage Modern Series perfectly.

The cosmetics on the Marshall speaker cab are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2266 and 425A or 425B Half Stack Features:

• Marshall Vintage Modern 2266 Tube Amp Head
• 50-Watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England
• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
• Weight: 39.6 lbs (18 kg)
  
  Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet
• 100-Watt, 4x12" cabinet
• Angled front
• Loaded with Celestion G12C 25 Greenbacks
• Mono or Stereo switchable
• 16 Ohms/4 Ohms mono
• 8 Ohms stereo
• Birch ply construction
• "finger-locking" joints
• Made in England
• Impedance
• Mono 16 Ohms/4 Ohms
• Stereo 8 Ohms/8 Ohms
• Dimensions 30.5" x 30" x 14.5" (770 x 755 x 365 mm)
• Weight
• 425A: 79 lbs. (36 kg)
• 425B: 81.5 lbs (37 kg)

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

The Marshall Vintage Modern 2266 50 Watt Head is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effect to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2266 Tube Amp Head Specifications:

• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
• Weight: 39.6 lbs (18 kg)

Marshall Vintage Modern 2266 Tube Amp Head Features:

• 50-Watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

The Marshall Vintage Modern 2266 50 Watt Head is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effect to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2266 Tube Amp Head - Scratch 'n' Dent As Is Specifications:

• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
• Weight: 39.6 lbs (18 kg)

Marshall Vintage Modern 2266 Tube Amp Head - Scratch 'n' Dent As Is Features:

• 50-Watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

The Marshall Vintage Modern 2266C 50 Watt 2 x 12 is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility of tonal shaping for individual guitars and styles while the power amplifier is heavily based on the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effect to further enhance their sound. Loop levels of 10dB and +4dB are catered for via rear panel switch as well as the option to completely bypass this feature if it is not required.

The Combo comes fitted with two Celestion G12C 25 Watt greenback speakers enabling stand-alone performance. There is a facility for using an extension cab if required.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2266 Tube Combo Amp Specifications:

• Dimensions: 27" x 22-1/2" x 10-1/2" (690 x 570 x 270 mm)
• Weight: 66 lbs. (30 kg)

Marshall Vintage Modern 2266 Tube Combo Amp Features:

• 50-Watt valve 2x12" combo
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Celestion G12C 25 Greenbacks*
• Made in England
  
  *Note: the speakers developed especially for the Limited Edition Jimi Hendrix Super100JH stack

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

The Marshall Vintage Modern 2266C 50 Watt 2 x 12 is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility of tonal shaping for individual guitars and styles while the power amplifier is heavily based on the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effect to further enhance their sound. Loop levels of 10dB and +4dB are catered for via rear panel switch as well as the option to completely bypass this feature if it is not required.

The Combo comes fitted with two Celestion G12C 25 Watt greenback speakers enabling stand-alone performance. There is a facility for using an extension cab if required.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2266 Tube Combo Amp Factory B-Stock Specifications:

• Dimensions: 27" x 22-1/2" x 10-1/2" (690 x 570 x 270 mm)
• Weight: 66 lbs. (30 kg)

Marshall Vintage Modern 2266 Tube Combo Amp Factory B-Stock Features:

• 50-Watt valve 2x12" combo
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Celestion G12C 25 Greenbacks*
• Made in England
  
  *Note: the speakers developed especially for the Limited Edition Jimi Hendrix Super100JH stack

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

This Marshall full stack includes one 2266 amp head, one 425A angled speaker cab, and one 425B straight speaker cab.

Marshall Vintage Modern 2266 Tube Amp Head
This head is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.
Two frequency selective Pre-amp Volumes (Gains)-Body and Detail-facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.
A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.
Finally, a series FX loop is provided for those players who wish to use outboard effect to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.
The cosmetics are also a carefully crafted hybrid of old and new styles-made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 425A & 425B 4x12 Extension Speaker Cabinets
These cabinets are traditional Marshall 4 x 12 speaker cabs in design. These cabs are mono/stereo switchable and are loaded with G12C 25 Watt Celestion Greenbacks. These were specifically developed for the Limited Edition Jimi Hendrix Super100JH stack and are voiced to give that rich and balanced harmonic timbre that complements vintage tone and the Vintage Modern Series perfectly.
The cosmetics are also a carefully crafted hybrid of old and new styles-made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2266, 425A and 425B Full Stack Specifications:

• Marshall Vintage Modern 2266 Tube Amp Head
• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230mm)
• Weight: 39.6 lbs. (18 kg)
  
  Marshall Vintage Modern 425A & 425B 4x12 Extension Speaker Cabinets
• Dimensions: 30.5" x 30" x 14.5" (770 x 755 x 365mm)
• 425A weight: 79 lbs. (36 kg)
• 425B weight: 81.5 lbs. (37 kg)

Marshall Vintage Modern 2266, 425A and 425B Full Stack Features:

• Marshall Vintage Modern 2266 Tube Amp Head
• 50-watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp
• Master Volume with two Gain Controls-Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England
  
  Marshall Vintage Modern 425A & 425B 4x12 Extension Speaker Cabinets
• 100-watt cabinets
• Loaded with Celestion G12C 25 Greenbacks
• Mono or Stereo switchable
• 16 ohms/4 ohms mono
• 8 ohms stereo
• Birch ply construction
• "finger-locking" joints
• Made in England

Make an investment in your sound that will pay dividends for years to come. Order now with the protection of our 45-day lowest price and total satisfaction guarantees

The Marshall Vintage Modern 2466 Tube Amp Head is an all-valve amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with four KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effects to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2466 Tube Amp Head Specifications:

• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
• Weight: 49.6 lbs (22.5 kg)

Marshall Vintage Modern 2466 Tube Amp Head Features:

• 100-Watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 4 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

The Marshall Vintage Modern 2466 Tube Amp Head is an all-valve amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with four KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effects to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2466 Tube Amp Head - Scratch 'n' Dent As Is Specifications:

• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
• Weight: 49.6 lbs (22.5 kg)

Marshall Vintage Modern 2466 Tube Amp Head - Scratch 'n' Dent As Is Features:

• 100-Watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 4 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

The Marshall Vintage Modern 2466 Tube Amp Head is an all-valve amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with four KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effects to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2466 Tube Amp Head Factory B-Stock Specifications:

• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
• Weight: 49.6 lbs (22.5 kg)

Marshall Vintage Modern 2466 Tube Amp Head Factory B-Stock Features:

• 100-Watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 4 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

The Marshall Vintage Modern 425A angled cab and 425B straight guitar speaker extension cabinets are traditional Marshall 4 x 12 speaker cabs in design. These cabs are mono/stereo switchable and are loaded with G12C 25 Watt Celestion Greenbacks. These were specifically developed for the Limited Edition Jimi Hendrix Super100JH stack and are voiced to give that rich and balanced harmonic timbre that complements vintage tone and the Vintage Modern Series perfectly.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 425 4x12 Speaker Cabinet Straight Factory B-Stock Specifications:

• Impedance
• Mono 16 Ohms/4 Ohms
• Stereo 8 Ohms/8 Ohms
• Dimensions 30.5" x 30" x 14.5" (770 x 755 x 365 mm)
  
  Weight
• 425A: 79 lbs. (36 kg)
• 425B: 81.5 lbs (37 kg)

Marshall Vintage Modern 425 4x12 Speaker Cabinet Straight Factory B-Stock Features:

• 100-Watt, 4x12" cabinet
• Angled front
• Loaded with Celestion G12C 25 Greenbacks
• Mono or Stereo switchable
• 16 Ohms/4 Ohms mono
• 8 Ohms stereo
• Birch ply construction
• "finger-locking" joints
• Made in England

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

The Marshall Vintage Modern 425A angled cab and 425B straight guitar speaker extension cabinets are traditional Marshall 4 x 12 speaker cabs in design. These cabs are mono/stereo switchable and are loaded with G12C 25 Watt Celestion Greenbacks. These were specifically developed for the Limited Edition Jimi Hendrix Super100JH stack and are voiced to give that rich and balanced harmonic timbre that complements vintage tone and the Vintage Modern Series perfectly.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet Specifications:

• Impedance
• Mono 16 Ohms/4 Ohms
• Stereo 8 Ohms/8 Ohms
• Dimensions 30.5" x 30" x 14.5" (770 x 755 x 365 mm)
  
  Weight
• 425A: 79 lbs. (36 kg)
• 425B: 81.5 lbs (37 kg)

Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet Features:

• 100-Watt, 4x12" cabinet
• Angled front
• Loaded with Celestion G12C 25 Greenbacks
• Mono or Stereo switchable
• 16 Ohms/4 Ohms mono
• 8 Ohms stereo
• Birch ply construction
• "finger-locking" joints
• Made in England

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

The Marshall Vintage Modern 425A angled cab and 425B straight guitar speaker extension cabinets are traditional Marshall 4 x 12 speaker cabs in design. These cabs are mono/stereo switchable and are loaded with G12C 25 Watt Celestion Greenbacks. These were specifically developed for the Limited Edition Jimi Hendrix Super100JH stack and are voiced to give that rich and balanced harmonic timbre that complements vintage tone and the Vintage Modern Series perfectly.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet - Scratch 'n' Dent As Is Specifications:

• Impedance
• Mono 16 Ohms/4 Ohms
• Stereo 8 Ohms/8 Ohms
• Dimensions 30.5" x 30" x 14.5" (770 x 755 x 365 mm)
  
  Weight
• 425A: 79 lbs. (36 kg)
• 425B: 81.5 lbs (37 kg)

Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet - Scratch 'n' Dent As Is Features:

• 100-Watt, 4x12" cabinet
• Angled front
• Loaded with Celestion G12C 25 Greenbacks
• Mono or Stereo switchable
• 16 Ohms/4 Ohms mono
• 8 Ohms stereo
• Birch ply construction
• "finger-locking" joints
• Made in England

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

Generous padding in the Marshall Wheeled Tube Head Carrying Bag protects your Marshall head from bumps and bruises. Convenient accessory pouch to store your amp's power cable and speaker cord.

Marshall Wheeled Tube Head Carrying Bag Features:

• Heavy-duty tote
• Wheels
• Retractable handle
• Generous padding
• Accessory pouch

Don't leave your head exposed. Take the right step today!

There's nothing micro about Zakk Wylde, but even Zakk doesn't always haul his full-sized Marshall everywhere he goes - like backstage to warm up. This 15W head and 2 cabs each with a 10" speaker create a stack that is only 15"W x 37"H x 9"D, but the Marshall MG15MSZW Microstack puts out a tone that's far from miniature. The head has all the standard MG features: control for clean volume; overdrive gain and volume; reverb level; and 3-way EQ with bass, treble, and a contour that lets you fine-tune the mids. It also boasts a CD input, an emulated line out, and a headphone jack that mutes the speakers.

Conceived by Dr. Jim Marshall after he and Zakk had shared a few whiskeys, this Zakk Wylde version of the Microstack sports salt & pepper grille cloth and a custom Zakk control panel with the famous bullseye pattern.

Marshall Zakk Wylde MG15MSZW Limited Edition Micro Stack Features:

• 15W head
• Angled & straight 1x10" cabinets
• Replicates the exact look of Zakk's legendary "Wall of Doom
• 2 channels - clean and "crushing" overdrive
• Spring Reverb
• Bass, treble, and contour EQ controls
• CD/MP3 input
• Emulated line out
• Headphone jack with speaker muting
• Zakk Wylde Bullseye control panel
• Salt & Pepper grille cloth

Marshall Zakk Wylde MG15MSZW Limited Edition Micro Stack Includes:

• Signature picks and poster

Think small but sound big. Order your Zakk Wylde MG Microstack today!