Professional recording quality and features at project studio prices from Apogee.

The Apogee Mini-MP preamplifier takes the reference quality of the Trak2 and the premium Mini-Me preamps to the next level.

The preamp offers an amazing-sounding, affordable, portable mic preamp that is an ideal addition to Apogee conversion systems, mobile studios and pro recording facilities. Just like its Mini-Series siblings, the Mini-MP gives you Apogee quality, without compromise, that you can take anywhere.

You've Got Gain
The Mini-MP features two individual ultra-fast, high-gain and low-distortion preamps, each providing an awesome 75 dB of gain. Adjustment is step-less via a single control knob, so there's no need for pads or other types of noisy switch mode gain adjustments. Another great advantage of a stepless gain control is the ability to adjust levels on the fly without pops and other audible gain. The ultra-linear gain control is also a very useful tool for those who like to "ride" the gain, making the unit a perfect solution for both studio and on-location recording.

Additionally, the Mini-MP Preamp provides a stereo master output gain control. This enables the Mini-MP to feed all types of audio equipment, balanced or unbalanced, from consumer to professional grade.

Keep the Noise Down
A problem with many mic preamplifiers is the noise and distortion they add to the signal. Not the Mini-MP. To maintain a crystal clear, ultra-low distortion audio path, all required switching is accomplished by gas-filled relays, and the use of capacitors in the audio chain has been limited to separating phantom power from the active circuitry only. This results in a considerable reduction in unwanted distortion and provides the clean sound you'd expect from a premium pre-amp.

Ins and Outs
The microphone inputs on the Mini-MP can handle levels up to +18dBu, giving you plenty of headroom. The Mini-MP also offers auto-selected High-Z inputs for instruments and consumer level equipment. This is a great feature for going direct from guitar, bass (or direct out from an amp), and keyboard to your recording device.

On the output side, the Mini-MP uses Apogee's newly developed electronically balanced line drivers which were designed for the Mini-DAC and simulate true transformer behavior. The result is perfect symmetry when used in balanced mode (even with an unsymmetrical load) and no increased distortion when used unbalanced. This circuitry is an ultra low output impedance, high current driver, capable of running levels up to 26dBu to the most complex or low impedance loads, as found in many recording studios utilizing vintage audio-equipment.

Middle-Side Mode
Another exciting feature of the Mini-MP is the selectable Mid-Side (MS) matrix decoder mode. MS is great for recording audio using an MS-configured mic setup, preserving total mono-compatibility or for changing the stereo width of existing L-R recorded material.

The Apogee Mini-MP can run as two completely individual pre-amps or in the Mid-Side mode, where the left channel will be the "Mid" and the right channel the "Side. " In this mode the left output is the "sum" and the right output the "difference. "

Phase, Phantom Power and High-pass filter
The Mini-MP Preamplifier includes a phase switch, phantom power, and a selectable 80Hz High-pass filter with a roll-off of 18dB/oct per channel. Mini-MP's High Pass filter works wonders for vocals, eliminating unwanted lows.

Easy on Energy
The Mini-MP has been specially designed for both field and studio recording, resulting in a premium pre-amp with low power consumption. The Apogee Mini-MP is not critical about its power-supply at all; any DC voltage 6-14 Volt at 1 amp will be sufficient. This gives the Mini-MP owner total flexibility to select from many battery and third party power pack options and the freedom to record any place, anywhere.

Apogee Mini-MP 2-Channel Analog Mic/Instrument Preamp Specifications:

• Pre-amp gain: 0 70 dB
• Output gain: nominal +6 dB
  
  Max input level: +18 dBu
• Max output level, ll @ THD+N <= -98 dB:
• 26 dBu in 100k Ohms
• 24 dBu in 600 Ohms
• 21 dBu in 300 Ohms
  
  THD+N:
• -105 dB at 0 dB of gain
• -96 dB at 40 dB
• -85 dB at 60 dB
  
  Bandwidth:
• 2.5 - > 200kHz(-.5 dB) at 0 dB gain
• 4 160 kHz (-3 dB) at 40 dB
• 4 92 kHz (-3 dB) at 60 dB
  
  EIN: <124 (22-22 kHz) 150 Ohms
  
  < strong>Input impedance:
• Balanced: 1.6k Ohms
• Unbalanced HI-Z: 2.2 M Ohms
  
  Output Impedance: 25 Ohms
  
  HPF:
• 18 dB/oct ( 3rd order Butterworth)
• -3dB at 80 Hz
  
  Phantom power: 48 Volt
• Power: 6 14 VDC, 3W

Apogee Mini-MP 2-Channel Analog Mic/Instrument Preamp Features:

• Superb two-channel microphone preamplifier with phantom power and HI-Z instrument inputs
• Low distortion pre-amps with 75dB of gain. THD+N: 105 dB at unity, -85 dB at 60 dB of gain
• Ultra-linear gain control
• Mid-Side (MS) feature
• 80 Hz Hi-pass filter with a roll off of +18dB/oct
• Low power consumption allowing the use of several types of batteries and third party power packs
• Inputs: 2, combi-jack mic/line inputs (Hi-Z)
• Outputs: 2, XLR analog out

Order with the protection of our 45-day lowest price and total satisfaction guarantees!

More volume, more dynamics, an extended frequency range and greater versatility.

Central to the performance of the compact, 350-Watt, 1 x 15 Neo MINI 15 cabinet is the use of a custom developed Neodymium speaker that incorporates a number of advanced features including a cast aluminium chassis with thin brackets to avoid sound wave reflections, a magnet circuit with heat sink rims to ensure rapid heat dissipation and decompression holes in the cone. The result is an ultra-lightweight bass driver that just keeps getting louder as the level is increased, delivering a powerful, consistent bass tone at all volume levels and with no power loss over long performances.

Ashdown NEO Mini 15 1 X 15 Bass Cab Specifications:

• Power Output (RMS): 350W
• Speaker Configuration: 1 x 15 Neo
• Impedance: 8 Ohms
• H x W x D (mm): 585 x 475 x 335
• Weight (kg): 21

Get the one that's built smart and you'll sound smart. Call or click now to order.

More volume, more dynamics, an extended frequency range and greater versatility.

Central to the performance of the compact, 1000-Watt, 4 x 8 Neo MINI 48 cabinet is the use of custom developed Neodymium speakers that incorporate a number of advanced features including a cast aluminium chassis with thin brackets to avoid sound wave reflections, a magnet circuit with heat sink rims to ensure rapid heat dissipation and decompression holes in the cone. The result is a ultra-lightweight bass driver that just keep getting louder as the level is increased, delivering a powerful, consistent bass tone at all volume levels and with no power loss over long performances.

Ashdown NEO Mini 48 4 x 8 Bass Cab Specifications:

• Power Output (RMS): 1000W
• Speaker Configuration: 4 x 8 Neo
• Impedance: 8 Ohms
• H x W x D (mm): 585 x 475 x 335
• Weight (kg): 25

Get the one that's built smart and you'll sound smart. Call or click now to order.

Get the most out of your Pocket Rock-It.

Kit includes: stereo 1/8" to 1/4" conversion plug for plugging your 1/8" headphone plug into the Pocket Rock-It's 1/4" headphone in, 1/8" headphone splitter plug so 2 people can listen at once, and a 6' long 1/8" to 1/8" interconnect cable to connect your MP3 player or CD player for jamming along.

C Tech Pocket Rock-It Cable Kit Features:

• 1/8" female to 1/4" TRS male stereo adapter
• 1/8" stereo male to 1/8" stereo male 6' cable
• 1/8" stereo male to 2 - 1/8" stereo female adapter

Order today and get into all the great things you can do with your Pocket Rock-It.

The battery-powered Pocket Rock-It S1 Headphone Amp allows you to practice silently in any location, and to have great tones at your disposal. The rotating input plug has 90 degrees of motion, so the S1 headphone amp can plug into any guitar jack-no cable needed!

The Pocket Rock-It headphone amp gives you 1 clean and 2 dirty settings for lots of tonal versatility. The Filter control is a continuously variable EQ that adjusts high and mid-range frequencies of the amp emulation model selected.

If you do decide to let the rest of the world in on your Pocket Rock-it S1 sessions, use the line out for recording or preamp applications. Jam with your CDs or MP3s with the headphone amp's line in.

The C Tech Pocket Rock-It S1 is designed, developed and engineered in the USA.

C Tech Pocket Rock-It S1 Standard Guitar Headphone Amp Features:

• Instrument Input: 1/4" male plug T/S
• Instrument Impedance: 1.0 M ohms
• CD/Line in: 1/8" jack T/R/S
• Line input impedance: >100 K ohms
• Line level input: 1.0 volts RMS
• Headphone/Line out: 1/8" jack T/R/S
• Headphone/Line out load: 8 Ohms min
• Battery (Alkaline or rechargeable): 9V
• Approx. Battery life: 20-24 hours
• Size: 3.3" x 2.3" x 1.4"
• Filter Control: 12db Mid/High Adjust
• Processor: 16 bit
• Headphones (included): 32 ohm, 44mm driver

Plug in anywhere! Call or click today to order.

The battery-powered Pocket Rock-It S1b is a bass headphone amp that allows you to practice silently in any location, and have great tones at your disposal. The rotating input plug has 90 degrees of motion, so the S1b headphone amp can plug into any bass guitar jack - no cable needed!

With a "big" or "tite" setting, you'll always have the tone you need for the style you're playing. The Filter control is a continuously variable EQ that adjusts high and mid-range frequencies of the amp emulation model selected.

If you do decide to let the rest of the world in on your Poacket Rock-it S1b sessions, use the line out for recording or preamp applications. Jam with your CDs or MP3s with the bass Pocket Rock-It's line in.

the Pocket Rock-It S1b Bass Headphone Amplifier was designed, developed and engineered in the USA.

C Tech Pocket Rock-It S1b Standard Bass Headphone Amp Features:

• Instrument Input: 1/4" male plug T/S
• Instrument Impedance: 1.0 M ohms
• CD/Line in: 1/8" jack T/R/S
• Line input impedance: >100 K ohms
• Line level input: 1.0 volts RMS
• Headphone/Line out: 1/8" jack T/R/S
• Headphone/Line out load: 8 Ohms min
• Battery (Alkaline or rechargeable): 9V
• Approx. Battery life: 10-15 hours
• Size: 3.3" x 2.3" x 1.4"
• Filter Control: 12db Mid/High Adjust
• Processor: 16 bit
• Headphones (included): 32 ohm, 44mm driver

Plug in anywhere! Call or click today to order.

The battery-powered Pocket Rock-It V1 is a headphone amp for guitar that allows you to practice silently in any location, and to have great tones at your disposal. The rotating input plug has 90 degrees of motion, so the V1 headphone amp can plug into any guitar jack-no cable needed!

Two clean and two dirty settings, with separate effects for double and chorus give you tons of tone versatility. The Filter control is a continuously variable EQ that adjusts high and mid-range frequencies of the Pocket Rock-It amp emulation model selected.

If you do decide to let the rest of the world in on your Pocket Rock-It V1 sessions, use the line out for recording or preamp applications. Jam with your CDs or MP3s with the line in or connect two Pocket Rock-Its and jam with a buddy (adapters and cables included).

The Pocket Rock-It V1 Guitar Headphone Amplifier was designed, developed and engineered in the USA.

C Tech Pocket Rock-It V1 Guitar Headphone Amp Features:

• Instrument Input: 1/4" male plug T/S
• Instrument Impedance: 1.0 M ohms
• CD/Line in: 1/8" jack T/R/S
• Line input impedance: >100 K ohms
• Line level input: 1.0 volts RMS
• Headphone/Line out: 1/8" jack T/R/S
• Headphone/Line out load: 8 Ohms min
• Battery (Alkaline or rechargeable): 9V
• Approx. Battery life: 10-15 hours
• Size: 3.3" x 2.3" x 1.4"
• Filter Control: 12db Mid/High Adjust
• Processor: 16 bit
• Headphones (included): 32 ohm, 44mm driver
• Also included: Stereo 1/8" (male) to dual 1/8" (female) headphone splitter, Stereo 1/8" (male) to stereo 1/4" (female) adapter, Stereo 1/8" (male) to stereo 1/8" (male) cable (6' long), Mono 1/4" (female) to mono 1/4" (female) adapter.

Plug in anywhere! Call or click today to order.

The battery-powered Pocket Rock-It V1b Bass Headphone Amp allows you to practice silently in any location, and to have great tones at your disposal. The rotating input plug has 90 degrees of motion, so the V1 from C Tech can plug into any bass guitar jack-no cable needed!

The Pocket Rock-It Bass Headphone Amp's 2 "big" and 2 "tite" settings, with separate settings for active and passive pickup simulation give you tons of tone versatility. The Filter control is a continuously variable EQ that adjusts high and mid-range frequencies of the amp emulation model selected.

If you do decide to let the rest of the world in on your V1b headphone amp sessions, use the line out for recording or preamp applications. Jam with your CDs or MP3s with the line in or connect two Pocket Rock-Its and jam with a buddy (adapters and cables included).

The C Tech Pocket Rock-It V1b Bass Headphone Amp is designed, developed and engineered in the USA.

C Tech Pocket Rock-It V1b Bass Headphone Amp Features:

• Instrument Input: 1/4" male plug T/S
• Instrument Impedance: 1.0 M ohms
• CD/Line in: 1/8" jack T/R/S
• Line input impedance: >100 K ohms
• Line level input: 1.0 volts RMS
• Headphone/Line out: 1/8" jack T/R/S
• Headphone/Line out load: 8 Ohms min
• Battery (Alkaline or rechargeable): 9V
• Approx. Battery life: 10-15 hours
• Size: 3.3" x 2.3" x 1.4"
• Filter Control: 12db Mid/High Adjust
• Processor: 16 bit
• Headphones (included): 32 ohm, 44mm driver
• Also included: Stereo 1/8" (male) to dual 1/8" (female) headphone splitter, Stereo 1/8" (male) to stereo 1/4" (female) adapter, Stereo 1/8" (male) to stereo 1/8" (male) cable (6' long), Mono 1/4" (female) to mono 1/4" (female) adapter.

Plug in anywhere! Call or click today to order.

2-hour fast charge of 2 NiMh batteries.

Keep charged up so your Pocket Rocket is always ready. Order today.

Rechargeable batteries to power your Rockit and beyond.

These 8.4V Nimh rechargeable batteries are suitable for use in all 9V applications and feature a nominal capacity of 200mah. A flat discharge curve and high nominal voltage ensure that your sound will always remain consistent. Recharge with the C-Tech 9V Nimh Battery Charger.

A great choice for all for your audio needs. Click or call to order today!

The Pocket Rockit Gig bag is the perfect place to store and carry your Pocket Rockit headphone amp. It includes storage space for your Pocket Rockit, headphones, batteries, charger, and cables. There is even a place to store your extra strings.

Order today and have your Pocket Rockit in the bag.

The world's smallest full-featured guitar amp.

The C Tech V2 Pocket Rockit Headphone Amplifier captures the tonal heritage of 50 years of guitar amp design. It combines analog and digital signal processing to reproduce classic tube amp tones. A proprietary DSP engine provides awesome digital effects such as reverb, delay, chorus, and flange, while an analog front end generates classic amp emulation tones.

You don't even need a cable. Like all Pocket Rockit products, the V2 plugs directly into any guitar. Just plug it in, put on your headphones and you're ready to rock 'n' roll. You can even play along with your favorite CD. Best of all, the V2 sounds better than many full-blown amplifiers.

The C Tech V2's amp emulation circuitry models vintage and current classics. The Clean amp button scrolls through 3 clean or slightly over-driven tones. The Dirty amp button scrolls through 3 gnarly, positively nasty high-gain selections. Sounds reminiscent of classic Fender, Marshall, Soldano and other amps are at your fingertips.

This headphone amp has 2 independent DSP effect banks: a delay bank with straight delay, flange, and chorus: and a reverb bank that includes arena reverb, small-hall reverb, and an echo effect. Use any effect independently, or use one from each bank simultaneously.

A digital tuner features audible low-E, A, D, G, B and high-E notes. Tri-colored LED indicates flat, sharp, or in tune. It's a perfect tool for improving your ear. A built-in click track/metronome has a naturally- sampled snare drum hit - there's no annoying buzz or tone. The Pocket Rockit's metronome has adjustable tempos between 60 -180 bpm provides a great way to work on your time.

C Tech Pocket Rockit V2 Guitar Headphone Amplifier Features:

• Plugs directly into your guitar no cables
• Built-in tuner and metronome
• 2 DSP effects engines provide reverb, delay, chorus, and flange effects (2 simultaneous)
• Models of vintage and current amplifier classics
• Analog front end
• Rotating input plug design (fits any guitar)

Most importantly, the Pocket Rockit sounds killer! Order today and practice big.

It's a mini amp built into a pedal!

It's a mini amp built into a pedal! It even has its own speaker, great tone, and amazing power. Plug it into a regular amp and it's a cool distortion box.

Save BIG when you buy today!

Retro styling and vintage tone in a mini amp!

This little hot rod can crank and has a great clean or overdriven sound. Also features a real leather handle, belt clip, headphone jack, volume, tone, and overdrive controls. Powered by 9-volt battery (included) or a Danelectro DA-1 adapter.

Danelectro Honeytone N-10 Guitar Mini Amp Features:

• Great clean and overdrive tones
• Leather handle
• Belt clip
• Headphone jack
• Volume, tone, and overdrive

It's dinky, but it ain't wimpy! Order yours today.

Practice so quietly only you will know how good you're getting.

The Dean Bass in a Box Bass Headphone Amp lets you plug in your bass, put on the headphones, and start playing. You'll hear the coolest, punchiest bass tones you've ever heard. Has a flat/normal/bright selector.

Dean Bass in a Box Bass Headphone Amplifier Features:

• Includes headphones
• Has flat/normal/bright selector

This is the least costly way in the world to get great bass tone. Order today.

Amazingly loud and cool-sounding little practice amp that clips on your belt.

Blasting overdrive sounds like a micro wall of amps. Ported cab, 3W peak power, distortion switch, volume and tone controls, headphone jack, LED power indicator, and DC adapter jack make it loads of fun.

Dean Markley GT1000 Micro Amp Features:

• Fantastic overdrive tone
• High-efficiency 3" speaker
• Ported cabinet
• 3 watts peak power
• Distortion switch
• Volume control
• Tone control
• Headphone jack
• LED power indicator
• On/off switch
• Input jack
• DC adapter jack
• Belt clip

Is this cool or what? Chuck it in the cart, you'll have a blast with it.

It's a huge wall of stadium-flattening amps, all in your head.

With crystal-clean tones, grinding overdrive, and screaming distortion, the little Dean Stack in a Box Guitar Headphone Amp is guaranteed to hurt a lot. Speaker simulation gives it that real giant-stack tone, but the tiny size lets the Dean Headphone Amp fit in your case. Headphones and battery included. Hook the tiny Dean amp up to most stereos and put a hurt on everybody ELSE too!

Dean Stack in a Box Guitar Headphone Amp Features:

• Clean, overdrive, and distortion
• Speaker simulator
• Small size
• Small price

A virtual-reality sonic battleground. You need it now. Buy it now.

The portable Dragonfly Stethoscope Headphone Amplifier needs no power supply to give busy musicians a convenient way to learn guitar or bass anywhere without disturbing others. Operates like a stethoscope to provide amplification direct from your guitar or bass guitar to your ears via the included headset. Mounts easily to the back of your instrument. Easy removal, too.

Dragonfly Stethoscope Headphone Amplifier Features:

• Suction cup attachment
• No batteries
• No cords
• Silent practice

Enjoy practicing without the hassles of batteries or guitar cords. Call or click today to order.

A classic Lilliputian powerhouse perfect for the office or game room!

The Mini '57 Twin is a super-cool little jammer with a realistic vintage visual vibe. The genuine tweed-covered wood cab contains built-in distortion; power, volume, and tone controls; plus one serious watt of power and 2 - 2" speakers. A 9V power adapter jack can be used in place of the 9V battery. Plug into the 1/4" headphone jack to get genuinely cool tone for practicing or even use it as a line out to a power amp or recording gear.

Fender '57 Mini Twin Amp Features:

• Super-realistic look
• One watt
• 2 - 2" speakers
• Tweed-covered wood cab
• Built-in distortion
• Power, volume, and tone controls
• 9V power adapter jack
• 1/4" headphone jack

The Fender '57 Twin Mini Amp: '50s tweed for your desktop with huge tone (OK maybe not "huge"). It rules! Order now.

Like a Hot Rod Deluxe that's been shrunk!

The Fender Mini Deluxe Amp has a level of detail unmatched by any other mini amplifier. Functional "dogbone" handle, chrome control plate, mini chicken-head knobs. And the Mini Deluxe has Fender tone, too!

Fender Mini Deluxe Amp Features:

• One watt of power
• Single 8 ohm, two-inch speaker
• Nine-volt AC in
• Headphone out

Grab one now. Later it'll be a collector's item.