Shape it to your exact tonal preferences by configuring the RM100C1 with any of 18 preamps 3 at a time!

Includes all-tube Clean, Treadplate, and Ultra plug-in preamp modules. A pair of Celestion G12T-75s translate all that tubal purity into rich tone! Cab comes fully closed-back with removable panel to make it semi-open back.

This highly versatile 3-channel combo melds tradition and technology. 3 independent channels can be loaded with your choice of any of the available tube preamp modules. Set this head up with tones that exactly fit your needs, then expand your arsenal anytime you like.

Enjoy the ease of replacing your power tubes anytime you like, with the very user-friendly power tube bias section. If a tube fails, no problem, the amp will kick that tube out of the circuit, and a small LED will light by the tube that fails.

Connect your RM100B to any MIDI-capable external processor and program individual effects to each channel. With the MIDI in/thru, simply select your channel and external effect, using the included RF3 MIDI footswitch. The footswitch will select both the RM100 channel and effect you want at the same time.

So, if you need the volume and power only a head will offer, choose one that will adapt to your styles.

All modules include 2 - 12AX7 preamp tubes, 3 band EQ with bright switch, and level control.

See recommended accessories on this page to choose from the following modules to build your own custom combination of tones:

Ultra Module Brown Module Clean Module SL+ Module Plexi Module JTM Module Top Boost Module Tweed Module Blackface Module DLX Module

Randall RM100C1 Tube Combo Amp Features:

• Holds any 3 of Randall's preamp modules
• 100 Watts
• Slotted grille front
• EL34 Ruby Power tubes
• 2 x 12" Celestion G12T-75 speakers
• Semi-open or closed-back cab
• MIDI in/thru
• Master Volume, Presence, Density controls
• Parallel loop with front panel mix control
• Series loop
• Rear tube bias section
• Slave out
• 3-button MIDI footswitch included
• 29"W x 23"H x 14"D
• 72 lbs.

Versatility and authenticity! Order today with the assurance of our Dual Guarantees!

Shape it to your exact tonal preferences by configuring the RM100C2 with any of 18 preamps 3 at a time!

Includes all-tube Blackface, Plexi, and XTC plug-in preamp modules. A pair of Celestion G12T-75s translate all that tubal purity into rich tone! Cab comes fully closed-back with removable panel to make it semi-open back.

This highly versatile 3-channel combo melds tradition and technology. 3 independent channels can be loaded with your choice of any of the available tube preamp modules. Set this head up with tones that exactly fit your needs, then expand your arsenal anytime you like.

Enjoy the ease of replacing your power tubes anytime you like, with the very user-friendly power tube bias section. If a tube fails, no problem, the amp will kick that tube out of the circuit, and a small LED will light by the tube that fails.

Connect your RM100B to any MIDI-capable external processor and program individual effects to each channel. With the MIDI in/thru, simply select your channel and external effect, using the included RF3 MIDI footswitch. The footswitch will select both the RM100 channel and effect you want at the same time.

So, if you need the volume and power only a head will offer, choose one that will adapt to your styles.

All modules include 2 - 12AX7 preamp tubes, 3 band EQ with bright switch, and level control.

See recommended accessories on this page to choose from the following modules to build your own custom combination of tones:

Ultra Module Brown Module Clean Module SL+ Module Plexi Module JTM Module Top Boost Module Tweed Module Blackface Module DLX Module

Randall RM100C2 100 Watt 2x12 Tube Combo Amp with Blackface, Plexi, and XTC Preamp Modules Features:

• Holds any 3 of Randall's preamp modules
• 100 Watts
• Slotted grille front
• EL34 Ruby Power tubes
• 2 - 12" Celestion G12T-75 speakers
• Semi-open or closed-back cab
• MIDI in/thru
• Master Volume, Presence, Density controls
• Parallel loop with front panel mix control
• Series loop
• Rear tube bias section
• Slave out
• 3-button MIDI footswitch included
• 29"W x 23"H x 14"D
• 72 lbs.

Versatility and authenticity! Order today with the assurance of our Dual Guarantees!

Take amplifier sound versatility to the next level.

Designed for ultimate flexibility, this revolutionary fully loaded 100-watt modular tube combo provides easy mobility without sacrificing the punchy tone of a closed back cabinet. Because it's an MTS series amp and can be loaded with any number of tube preamps, it had to be a cabinet that would work well for both rock and metal, as well as spankin' country and blues.

To do this, Randall designed the guitar amplifier with a dual back option. The amp comes from the factory basically sealed giving you the punch and tightness of a closed 2 x 12, but it also includes a 1/3 removable top panel to achieve the looser, more boomy low end found in traditional semi-open back combos.

The RM100 features a unique Palomino covering (RM100CP2) with tweed grille cloth, and comes preloaded with 3 modules! Blackace, Plexi, and XTC.

Blackface - (Based on the preamp circuit of a Fender® Blackface Twin™. Legendary clean tone with cutting mid-range and sparking highs. The standard for a wide-range of cleans.)

Plexi - (Based on the preamp circuit of a classic Marshall® Plexi. Anywhere from Page, to Angus, to Gibbons. The amp that defines 70's rock and punk tone. )

XTC - (Based on the preamp circuit of a Bogner® Ecstasy red channel. An all around great hi-gain tone with tight low end and cutting mid-range. It will cover any rock to metal tone. This one screams!)

The all tube series of amps, preamps, and combos offers incredible flexibility. The swappable MTS modular preamp components allow you to customize your set-up for a sound that's all yours.

With fourteen modules to choose from and more in the works, having an amp is as simple as plugging in a new module. Start with as few as one, or as many as you like and have all your favorite tones right at your fingertips. All modules can be used for the RM4 preamp, RM combos and RM heads. All modules utilize the same panel layout, which includes Gain, Bass, Mid, Treble and Master controls.

A bright switch is included directly under each Bass control. Each preamp module houses two 12AX7 tubes which can be easily changed or replaced. Use the thumbscrewa to remove or secure each module to the front panel of every MTS amplifier.

Randall MTS Series RM100 100W 2x12 Guitar Combo Amp with Modules Features:

• 3 module spaces
• 2 x 12" design with 2 16Ohm Celestion G12T-75s
• 100 watts
• New for 2006 - 6L6 power tubes
• Master volume
• Master density & presence
• MIDI in/thru
• Tube buffered parallel effects loops with front panel mix control
• Series effects loop
• Rear panel bias test points
• Slave output
• Includes 3 button MIDI foot controller
• World voltage AC input selector (100/120/220/240)

Get the amp that can change with you! Order today.

The first ever Hammett head!

The Randall MTS Series RM100KH amp head was developed with one of the world's most influential guitar players to produce each all-tube tone of Kirk's illustrious career. This all-tube 100W Randall amp head includes three modular tube preamps including the KH1, Kirk's signature clean, the KH2, Kirk's classic rhythm tone, and the KH3, Kirk's modern lead and rhythm tone. Based on the revolutionary MTS design, this guitar tube amp head includes 3 fully modular channels that can also be changed or reconfigured to hold any of Randall's MTS tube preamp modules.

Randall Kirk Hammett Signature Series RM100KH 100W Tube Guitar Amp Head Features:

• Preamp channels: 3 Modular Channels
• KH1, KH2 & KH3 tube preamps
• Master ControlsVolume, Density & Presen: ce
• Power Amp: 100 Watts
• 4 x JJ 6L6GC Power tubes
  
  Rear Panel Features:
• Series EFX Loop
• Parallel EFX Loop w/front panel Mix control
• MIDI In/Thru
• Tube Bias Section w/bias individual adjustments
• World Voltage Selector
  
  Included RF3 MIDI foot controller

Randall Kirk Hammett Signature Series RM100KH 100W Tube Guitar Amp Head Includes:

• RF3 MIDI foot controller

Hear for yourself why Kirk chose Randall MTS as his first Signature tube amplifier. Order now.

Shape it to your exact tonal preferences by configuring the RM100M with any of 18 preamps 3 at a time!

Includes all-tube Blackface, Plexi, and XTC plug-in preamp modules.

This highly versatile 3-channel head melds tradition and technology. 3 independent channels can be loaded with your choice of any of the available tube preamp modules. Set this head up with tones that exactly fit your needs, then expand your arsenal anytime you like.

Enjoy the ease of replacing your power tubes anytime you like, with the very user-friendly power tube bias section. If a tube fails, no problem, the amp will kick that tube out of the circuit, and a small LED will light by the tube that fails.

Connect your RM100B to any MIDI-capable external processor and program individual effects to each channel. With the MIDI in/thru, simply select your channel and external effect, using the included RF3 MIDI footswitch. The footswitch will select both the RM100 channel and effect you want at the same time.

So, if you need the volume and power only a head will offer, choose one that will adapt to your styles.

All modules include 2 - 12AX7 preamp tubes, 3 band EQ with bright switch, and level control.

See recommended accessories on this page to choose from the following modules to build your own custom combination of tones:

Ultra Module Brown Module Clean Module SL+ Module Plexi Module JTM Module Top Boost Module Tweed Module Blackface Module DLX Module

Randall RM100M2 100-Watt Tube Amp Head with Blackface, Plexi, and XTC Preamp Modules Features:

• Includes all-tube Blackface, Plexi, and XTC plug-in preamp modules
• Holds any 3 of Randall's preamp modules
• 100 Watts
• Slotted grille front
• EL34 Ruby Power tubes
• MIDI in/thru
• Master Volume, Presence, Density controls
• Parallel loop with front panel mix control
• Series loop
• Rear tube bias section
• Slave out
• 3-button MIDI footswitch included
• 29"W x 12"H x 11"D
• 35 lbs.

Versatility and authenticity! Order today with the assurance of our Dual Guarantees!

Shape it to your exact tonal preferences by configuring the RM100M with any of 18 preamps 3 at a time!

Includes all-tube Clean, Treadplate, and Ultra plug-in preamp modules.

This highly versatile 3-channel head melds tradition and technology. 3 independent channels can be loaded with your choice of any of the available tube preamp modules. Set this head up with tones that exactly fit your needs, then expand your arsenal anytime you like.

Enjoy the ease of replacing your power tubes anytime you like, with the very user-friendly power tube bias section. If a tube fails, no problem, the amp will kick that tube out of the circuit, and a small LED will light by the tube that fails.

Connect your RM100B to any MIDI-capable external processor and program individual effects to each channel. With the MIDI in/thru, simply select your channel and external effect, using the included RF3 MIDI footswitch. The footswitch will select both the RM100 channel and effect you want at the same time.

So, if you need the volume and power only a head will offer, choose one that will adapt to your styles.

All modules include 2 - 12AX7 preamp tubes, 3 band EQ with bright switch, and level control.

See recommended accessories on this page to choose from the following modules to build your own custom combination of tones:

Ultra Module Brown Module Clean Module SL+ Module Plexi Module JTM Module Top Boost Module Tweed Module Blackface Module DLX Module

Randall RM100M1 Tube Amp Head Features:

• Holds any 3 of Randall's preamp modules
• 100 Watts
• Slotted grille front
• EL34 Ruby Power tubes
• MIDI in/thru
• Master Volume, Presence, Density controls
• Parallel loop with front panel mix control
• Series loop
• Rear tube bias section
• Slave out
• 3-button MIDI footswitch included
• 29"W x 12"H x 11"D
• 35 lbs.

Versatility and authenticity! Order today with the assurance of our Dual Guarantees!

Shape it to your exact tonal preferences by configuring the RM100C2 with any of 18 preamps 3 at a time!

Includes all-tube Blackface, Plexi, and XTC plug-in preamp modules. A pair of Celestion G12T-75s translate all that tubal purity into rich tone! Cab comes fully closed-back with removable panel to make it semi-open back.

This highly versatile 3-channel combo melds tradition and technology. 3 independent channels can be loaded with your choice of any of the available tube preamp modules. Set this head up with tones that exactly fit your needs, then expand your arsenal anytime you like.

Enjoy the ease of replacing your power tubes anytime you like, with the very user-friendly power tube bias section. If a tube fails, no problem, the amp will kick that tube out of the circuit, and a small LED will light by the tube that fails.

Connect your RM100B to any MIDI-capable external processor and program individual effects to each channel. With the MIDI in/thru, simply select your channel and external effect, using the included RF3 MIDI footswitch. The footswitch will select both the RM100 channel and effect you want at the same time.

So, if you need the volume and power only a head will offer, choose one that will adapt to your styles.

All modules include 2 - 12AX7 preamp tubes, 3 band EQ with bright switch, and level control.

See recommended accessories on this page to choose from the following modules to build your own custom combination of tones:

Ultra Module Brown Module Clean Module SL+ Module Plexi Module JTM Module Top Boost Module Tweed Module Blackface Module DLX Module

Randall RM100C2 100 Watt 2x12 Tube Combo Amp with Blackface, Plexi, and XTC Preamp Modules - Scratch 'n' Dent Features:

• Holds any 3 of Randall's preamp modules
• 100 Watts
• Slotted grille front
• EL34 Ruby Power tubes
• 2 - 12" Celestion G12T-75 speakers
• Semi-open or closed-back cab
• MIDI in/thru
• Master Volume, Presence, Density controls
• Parallel loop with front panel mix control
• Series loop
• Rear tube bias section
• Slave out
• 3-button MIDI footswitch included
• 29"W x 23"H x 14"D
• 72 lbs.

Versatility and authenticity! Order today with the assurance of our Dual Guarantees!

Get the legendary Lynch sound!

Designed and based around the current RM100 electronics, the George Lynch Signature Series Lynch Box amplifier head is a culmination of Lynch's legendary signature guitar tones from the past to the present, and includes three modules.

Modules

Mr. Scary: What you've been waiting for! It's the Lynch heavy rhythm and lead tone of Dokken and Lynch Mob era. It has similar voicing to that of the Brahma with additional gain and punch. The standard 80's high gain tone with tight low end and impressive gain.
Grail: A modern Lynch lead and rhythm tone. A true Rectifier feel with thicker lower mid-range than the "Mr. Scary" preamp. A modern lead tone from the Lynch Mob to current era.
Brahma: A mouthwatering classic hi-gain tone that represents George's signature rhythm sound. This preamp has the classic British voicing with signature American tone modifications. It's Lynch's variation of the vintage Plexi tone.

Randall MTS Series Lynch Box 100W Amp Head with Modules Features:

• 3 modular channels
• 100 watts all tube
• JJ E34L power tubes
• Custom Dark Forest Alligator vinyl
• Gold piping
• Master Volume
• Master Presence
• Master Density
• Series loop
• Parallel loop w/front panel mix control
• MIDI in/thru
• Rear panel tube bias section
• World Voltage selector
• MIDI footswitch included

George Lynch's custom-tuned guitar rig can be yours with a simple click or call. Do it now!

A half-stack's nightmare!

Designed for ultimate flexibility, this fully loaded 100-watt modular tube combo provides easy mobility without sacrificing the punchy tone of a closed-back speaker cabinet. Because it's an MTS series amp and can be loaded with any number of tube preamps, it had to be a cabinet that would work well for both rock and metal, as well as spankin' country and blues.

To do this Randall designed the amp with a black covering (RM100C) and a dual back option. The amp comes from the factory basically sealed giving you the punch and tightness of a closed 2 x 12, but it also includes a 1/3 removable top panel to achieve the looser, more boomy low end found in traditional semi-open back combos.

Randall MTS Series RM100 100W 2x12 Guitar Combo Amp without Modules Features:

• 3 module spaces
• 2 x 12" design with 2 16Ohm Celestion G12T-75s
• 100 watts
• 6L6 power tubes
• Master volume
• Master density & presence
• MIDI in/thru
• Tube buffered parallel effects loops with front panel mix control
• Series effects loop
• Rear panel bias test points
• Slave output
• Includes 3 button MIDI foot controller
• World voltage AC input selector (100/120/220/240)

Get the amp that can change with you! Order today.

The unparalleled flexibility of removable all-tube preamps 2 at a time.

Includes Blackface and Plexi all-tube plug-in preamp modules and a slick-looking Titanium silver grille cloth. 18 independent hot-swappable plug-in preamps are available. Physically designed after the preamp sections of the world's greatest amps, they generate unparalleled purity of tone in all styles. The RM50B accommodates any combination of 2 classic or modern amps, simply by plugging in your choice of tube preamp modules. Designed for the club professional who is looking for an all-tube amp with multiple tones. The RM50 gives you 50W of power using Ruby 6L6 tubes, a 12" Celestion G12 Century speaker, and 2 modular channels for plugging in Randall preamps. Controls include master volume, master density and presence controls, and front panel mix control. Connections include a tube-buffered parallel effects loop, series effects loop, slave out, rear master input (for volume pedal), and rear bias test points.

Randall RM50S2 50-Watt 1x12" Modular Tube Combo Amp with Blackface and Plexi Preamp Modules. Features:

• Blackface and Plexi preamp modules
• Titanium silver grille cloth
• 50W of power using Ruby 6L6 tubes
• 12" Celestion G12 Century speaker
• 2 modular channels for plugging in Randall preamps
• Master volume, master density and presence controls, and front panel mix control
• Tube-buffered parallel effects loop
• Series effects loop
• World voltage AC input selector
• Slave out
• Rear master input (for volume pedal)
• Rear bias test points
• 19"W x 25"H x 13"D
• 55 lbs.

Go modular and start collecting your favorite preamps.

Get the George Lynch sound with this amazing, customizeable amp head.

Randall introduces the MTS Series George Lynch Signature Series Lynch Box head. Reunited as partners after nearly two decades, Randall is proud to launch the Lynch Box 100-watt modular tube head. Designed and based around the current RM100 electronics, the new Lynch Box is a culmination of Lynch's legendary signature guitar tones from the past to the present. Choose between 4 new signature tube preamps, each capturing a span of his illustrious career, and simply load them into any of the 3 Lynch Box channels. All Signature modules are 100% compatible with each MTS series amp. If you're a fan of the Lynch tone this is the amp you've been waiting for.

•Don't forget to order MTS Signature George Lynch modules for your new modular amp head!

Randall MTS Series Lynch Box 100W Amp Head without Modules Features:

• 3 Modular Channels
• 100 Watts all tube
• JJ E34L power tubes
• Custom Dark Forest Alligator vinyl
• Gold piping
• Master Volume
• Master Presence
• Master Density
• Series loop
• Parallel loop w/front panel mix control
• MIDI in/thru
• Rear panel tube bias section
• World Voltage selector
• MIDI footswitch included

Get the amp that can change with you! Order today.

Don't model—MODULE with the MTS system!

The Randall MTS Series RM50HP2 is both traditional and modern technology rolled into one amplifier head. First, you have 2 independent modular channels that can be loaded with your choice and combination of the available tube preamp modules. Load each channel with a preamp tone that fits only your needs with the ability to expand your arsenal anytime a new tone is needed. Don't purchase an amplifier because you like only it's clean or high-gain tone. Build this amp with your clean, your rhythm, and your high-gain tone for a complete custom set up. With more than a dozen tube preamps always available, chances are you'll have a hard time picking just two.

Change and bias your own power tubes! Enjoy the ease of replacing your power tubes anytime you like with the very user friendly power tube bias section found on each MTS amplifier. If a tube fails, no problem, the amp will kick that tube out of the circuit and a small LED will light by the tube that fails. Replace only the small protection fuse and tube using a small voltage meter and small screwdriver to adjust each individual bias point. If you like experimenting with different tube types, the bias section allows you to pop-in and bias a new set of tubes in just a few minutes.

MIDI channel switching and capability! Connect your RM50 to any MIDI capable external processing and program individual effects to each channel. With the MIDI in/thru jacks simply select your channel and external effect, using the included MIDI footswitch, press and hold the channel switch button on the head for two seconds, and hit the store button of the processor to save the preset. The included footswitch will then select both the RM50 channel and effect you want at the same time.

The RM50HP2 features a unique Palomino covering with tweed grille cloth and comes preloaded with two modules! Blackface and Plexi.

Blackface - Based on the preamp circuit of a Fender® Blackface Twin™. Legendary clean tone with cutting mid-range and sparking highs. The standard for a wide-range of cleans.

Plexi - Based on the preamp circuit of a classic Marshall® Plexi. Anywhere from Page, to Angus, to Gibbons. The amp that defined '70s rock and punk tone.

The most flexible all-tube series of amps, preamps, and combos ever created. The swappable MTS modular preamp components allow you to customize your set up for a sound that's all yours.

You choose the tone! With 14 modules to choose from and more in the works, having a new amp is as simple as plugging in a new module. Start with as few as one or as many as you like, and have all your favorite tones right at your fingertips. All modules can be used for the RM4 preamp, RM combos, and RM heads. All modules utilize the same panel layout, which includes Gain, Bass, Mid, Treble, and Master controls.

A bright switch is included directly under each Bass control. Each preamp module houses two 12AX7 tubes which can easily be changed or replaced. Use the thumbscrew to remove or secure each module to the front panel of every MTS amplifier.

Randall MTS Series RM50HP2 50W Guitar Amp Head with Modules Features:

• 2 modules Blackface, Plexi
• 50 watts 6L6 tube
• Tweed cloth front
• Master volume
• Master density & presence
• Accutronics spring reverb
• Tube buffered parallel effects loops with front panel mix control
• Series effects loop
• Slave output
• Rear panel bias test points
• Master volume input (for volume pedals)
• Footswitch included
• World voltage AC input selector (100/120/220/240)

Get the amp that can change with you! Order today.

3 channels of hybrid versatility and huge power.

Designed and inspired by Arch Enemy lead guitarist Michael Amott and developed for the guitarist who likes multiple tone shaping options, the highly flexible V2 Ninja amp head can basically produce any tone you want using a full tube preamp as well as a classic Randall solid-state preamp. A Tube driven Mosfet power section called "Valve-Dynamic" powers the V2 Ninja with so much reaction and feel that you would swear it had a full set of power tubes driving the amp. This 12AT7 driven power circuit not only has the feel, but also an accurate frequency response found only in a full tube power section. The Randall V2 Ninja head offers a three channel head which includes a classic solid state clear channel, a classic Randall overdrive channel and an all-tube pre amp channel with "Attack" & "Bright". It also features a midi assignable 6-band graphic EQ and parallel effects loop, a master volume control, power amp density and presence controls and RUBY 12AX7AC5HG preamp tube.

Randall XL Series V2 Ninja V2NH 400W Hybrid Guitar Amp Head Features:

• 400W @ 4 Ohms, 280W @ 8 Ohms, 500W@2 Ohms
  
  3-MIDI programmable channels:
• Ch.3: All-tube preamp with 3-12AX7 preamp tubes. Includes "Attack" switch for tight and loose feel, and "Bright" switch.
• Ch. 2- Classic Randall S.S. channel with push/pull "Sustain Boost".
• Ch. 1- Classic full clean with big headroom.
  
  MIDI Assignable 6-band Graphic EQ with single On/Off switch. Can be activated for any/all channels then stored and recalled by the included 5-button MIDI foot controller.
• Assignable "Series" or "Parallel" Effects loop with single On/Off switch. Can also be activated for any/all channels then stored and recalled by the included MIDI foot controller.
• Master front "Volume" control
• Master "Density" control. Adjusts the power amp low end dynamics.
• Master "Presence" control. Adjusts the power amp extreme high end dynamics
• MIDI in/thru
• Mic Eliminator XLR direct recording output
• World voltage AC inlet

Take advantage of our dual guarantees and order today.

The unparalelled flexibility of removeable all-tube preamps 2 at a time.

Includes Blackface and Plexi all-tube plug-in preamp modules. 18 independent hot-swappable plug-in preamps are available. Physically designed after the preamp sections of the world's greatest amps, they generate unparalleled purity of tone in all styles. The Randall RM50HB2 becomes any combination of classic or modern amps, simply by plugging in your choice of tube preamp modules. Designed for the club professional who is looking for an all-tube amp with multiple tones. The RM50B gives you 50W of power using Ruby 6L6 tubes and 2 modular channels for plugging in Randall preamps. Controls include master volume, master density and presence controls, and front panel mix control. Connections include a tube-buffered parallel effects loop, series effects loop, slave out, rear master input (for volume pedal), and rear bias test points.

Randall RM50HB2 50-Watt Modular Tube Amp Head with Blackface and Plexi Modules Features:

• Includes Blackface and Plexi all-tube plug-in preamp modules
• 50W of power using Ruby 6L6 tubes
• 2 modular channels for plugging in Randall preamps
• Master volume, master density and presence controls, and front panel mix control
• Tube-buffered parallel effects loop
• Series effects loop
• Slave out
• Rear master input (for volume pedal)
• Rear bias test points
• World voltage AC input selector
• 25"W x 13"H x 10"D
• 32 lbs.

Go modular and start collecting your favorite preamps.

Classic Randall hi-gain with MIDI programmability.

The Randall V2 Amp Head was developed for the guitarist who likes multiple tone-shaping options. The V2 amplifier head can produce almost any tone you can imagine, using a full tube preamp as well as a classic Randall solid-state preamp. Holding true to hi-gain roots, Randall pushed the boundaries of modern design that has resulted in this original take on hybrid guitar amplification.

A revolutionary new tube-driven MOSFET power section called "Valve-Dynamic" powers the V2 with so much reaction and feel that you would swear it was a full set of power tubes driving the amp. This 12AT7 driven power circuit not only has the feel, but also an accurate frequency response found only in a full tube power section.

Product Details
400W @ 4 Ohms, 280W @ 8 Ohms, 500W@2 Ohms
3-MIDI programmable channels:
Ch.3: All tube preamp with 3-12AX7 preamp tubes. Includes "Attack" switch for tight and loose feel, and "Bright" switch.
Ch. 2- Classic Randall S.S. channel with push/pull "Sustain Boost".
Ch. 1- Classic full clean with big headroom.
MIDI Assignable 6-band Graphic EQ with single On/Off switch. Can be activated for any/all channels then stored and recalled by the included 5-button MIDI foot controller.
Assignable "Series" or "Parallel" Effects loop with single On/Off switch. Can also be activated for any/all channels then stored and recalled by the included MIDI foot controller.
Master front "Volume" control
Master "Density" control. Adjusts the power amp low end dynamics.
Master "Presence" control. Adjusts the power amp extreme high end dynamics
MIDI in/thru
Mic Eliminator XLR direct recording output
World voltage AC inlet

Randall V2 Guitar Amp Head Features:

• 400W power @ 4 ohms
• Tube-driven MOSFET power section
• 3 MIDI-switching channels: all-tube preamp with 3-12AX7 preamp tubes, classic Randall S.S. channel, and full clean with big headroom and MIDI assignable 6-band graphic
• Included MIDI foot controller
• Programmable "Series" or "Parallel" Effects loop with single on/off switch
• Gain and Level controls for both channels
• Master Density control
• Master Presence control
• Mic Eliminator XLR direct recording output

With its incredible versatility, this may be the only amp you'll ever want. Order today with the assurance of our dual guarantees.

Shape it to your exact tonal preferences by configuring the RM100M with YOUR choice of 3 preamps!

This highly versatile Randall RM100M 100 Watt 3-channel Guitar Amplifier Head melds tradition and technology. 3 independent channels can be loaded with your choice of any of the available tube preamp modules from Randall (modules sold separately). Set this head up with tones that exactly fit your needs, then expand your arsenal anytime you like.

Enjoy the ease of replacing your power tubes anytime you like, with the very user-friendly power tube bias section. If a tube fails, no problem, the amplifier will kick that tube out of the circuit, and a small LED will light by the tube that fails.

Connect your RM100M amp head to any MIDI-capable external processor and program individual effects to each channel. With the MIDI in/thru, simply select your channel and external effect, using the included RF3 MIDI footswitch. The footswitch will select both the RM100 channel and effect you want at the same time.

So, if you need the volume and power only a head will offer, choose one that will adapt to your styles.

All optional modules include 2 - 12AX7 preamp tubes, 3 band EQ with bright switch, and level control.

Choose from the following modules to build your own custom combination of tones:
Ultra Module
Brown Module
Clean Module
Dual Treadplate Style Preamp Module
SL+ Module
Plexi Module
JTM Module
Top Boost Module
Tweed Module
Blackface Module
DLX Module

Randall RM100M Empty 3 Module 100W Guitar Amp Head Features:

• Holds any 3 of Randall's preamp modules
• 100 Watts
• Slotted grille front
• EL34 Ruby Power tubes
• MIDI in/thru
• Master Volume, Presence, Density controls
• Parallel loop with front panel mix control
• Series loop
• Rear tube bias section
• Slave out
• 3-button MIDI footswitch included

Versatility and authenticity! Order today with the assurance of our Dual Guarantees!

The perfect power amp for pairing with the RM4 preamp.

The Randall RT2-50 is a 50W/50W 2-channel stereo power amp. It can switched via MIDI or is footswitchable with RF4 foot controller. Comes with 6L6s in Channel 1, and EL34s in Channel 2. Each channel has master volume, presence, and density controls; MIDI in/thru; and 4-, 8-, or 16-ohm switch. Paired with RM4 preamps, the switchable channels with different tube arrays let you create classic amp sounds with even greater realism.

Randall RT2-50 50w/50w Stereo Tube Power Amplifier Features:

• 50W/50W
• 2-channels
• Footswitchable with the RF4 foot controller or via MIDI
• 6L6s in Channel 1
• EL34s in Channel 2
• Each channel has master volume, presence, and density controls
• MIDI in/thru
• 4, 8, or 16-ohm switch

Order today and pair it with RM4 preamps for a killer rig.

Big, deadly, and totally equipped.

Designed with a simple, straight ahead
front panel layout and a shorter, less complex signal path, the Randall T2 Amp Head produces an extremely powerful, punishing tone. A true 3-mode amplifier, the T2 offers a wide range of tones to fit any playing style while seriously catering to those who hunger for gain.

A revolutionary power circuit called "Valve-Dynamic" is the engine that drives this new high-powered head. This tube driven MOSFET power section is driven by a 12AT7 for natural tube feel and compression, but the key to this power circuit is the accuracy in frequency response of a full 100W tube power amp, resulting in dynamic all-tube tone, feel, and response.

Product Details
A 2-channel all-tube preamp with 3 modes
Mode 3: A boosted overdrive with punishing gain and liquid sustain.
Mode 2: Classic overdrive channel for vintage to modern tube tone .
Mode 1: Full tube clean with warm tone and big headroom.
400W @ 4 Ohms, 280W @ 8 Ohms, 500W @ 2 Ohms
3 MIDI-switching channels
Programmable "Series" or "Parallel" Effects loop with single on/off switch. Can also be activated for any/all channels then stored and recalled by the included MIDI foot controller.
Gain and Level controls for both channels.
Master "Density" control. Adjusts the power amp low-end dynamics.
Master "Presence" control. Adjusts the power amp extreme high end dynamics
MIDI in/thru
Mic Eliminator XLR direct recording output
World voltage selector/AC inlet

Randall T2 Amp Head Features:

• 400W power @ 4 ohms
• A true 3-mode amplifier
• Tube-driven Mosfet power section
• 2-channel all-tube preamp
• 3 MIDI-switching channels
• Included MIDI foot controller
• Programmable "Series" or "Parallel" Effects loop with single on/off switch
• Gain and Level controls for both channels
• Master Density control
• Master Presence control
• Mic Eliminator XLR direct recording output

Call or click today to order.

The perfect power amp for pairing with the RM4 preamp.

The Randall RT2-50 is a 50W/50W 2-channel stereo power amp. It can switched via MIDI or is footswitchable with RF4 foot controller. Comes with 6L6s in Channel 1, and EL34s in Channel 2. Each channel has master volume, presence, and density controls; MIDI in/thru; and 4-, 8-, or 16-ohm switch. Paired with RM4 preamps, the switchable channels with different tube arrays let you create classic amp sounds with even greater realism.

Randall RT2-50 50w/50w Stereo Tube Power Amplifier - Scratch 'n' Dent Features:

• 50W/50W
• 2-channels
• Footswitchable with the RF4 foot controller or via MIDI
• 6L6s in Channel 1
• EL34s in Channel 2
• Each channel has master volume, presence, and density controls
• MIDI in/thru
• 4, 8, or 16-ohm switch

Order today and pair it with RM4 preamps for a killer rig.

The unparalleled flexibility of removable all-tube preamps 2 at a time.

18 independent hot-swappable plug-in preamps are available. Physically designed after the preamp sections of the world's greatest amps, they generate unparalleled purity of tone in all styles. The RM50B accommodates any combination of 2 classic or modern amps, simply by plugging in your choice of tube preamp modules. Designed for the club professional who is looking for an all-tube amp with multiple tones. The RM50 gives you 50W of power using Ruby 6L6 tubes, a 12" Celestion G12 Century speaker, and 2 modular channels for plugging in Randall preamps. Controls include master volume, master density and presence controls, and front panel mix control. Connections include a tube-buffered parallel effects loop, series effects loop, slave out, rear master input (for volume pedal), and rear bias test points.

Randall RM50B 50-Watt 1x12" Modular Tube Combo Amp Features:

• 50W of power using Ruby 6L6 tubes
• 12" Celestion G12 Century speaker
• 2 modular channels for plugging in Randall preamps
• Master volume, master density and presence controls, and front panel mix control
• Tube-buffered parallel effects loop
• Series effects loop
• World voltage AC input selector
• Slave out
• Rear master input (for volume pedal)
• Rear bias test points
• 19"W x 25"H x 13"D
• 55 lbs.

Go modular and start collecting your favorite preamps.