Designed by George Lynch to go with his signature MTS Lynch Box head.

With this MTS Series cab, Randall introduces the George Lynch Signature Series Lynch Box guitar speaker cabinet. To reproduce the Lynch Box tone, George developed the exact speaker cabinet specifications he was looking for, resulting in a huge sounding guitar speaker cab with thick, smooth mid-range and defined highs. This slightly oversized rear port speaker cabinet is constructed by hand using a combination of void-free birch plywood and a high density fiberboard for tight projecting tone. If you're a fan of the Lynch tone this is the guitar cab you've been waiting for.

Randall MTS Series Lynch Box Signature 300W 4x12 Guitar Extension Cabinet Features:

• 300 Watts RMS
• Signature Eminence Super V speakers
• 3/4" void free birch
• 8 Ohm mono input

Get the right speaker cabinet for your MTS amp. Order today!

A speaker cabinet crafted for your MTS amp!

The MTS R112C cabinet is made to complement the flexible MTS amp line from Randall. All Randall cabinets are hand crafted in-house out of top quality 7-ply, 3/4" void free birch. All speaker cabinets are outfitted with various Celestion speakers. All MTS cab now includes the new crossover Mic Eliminator.

Randall MTS Series R112C 25W 1x12 Guitar Extension Cabinet Features:

• 25 Watts RMS
• 3/4" birch plywood construction
• Celestion Greenback speaker
• 8 ohm mono input

Get the right speaker cabinet for your MTS amp. Order today!

A speaker cabinet crafted for your MTS amp!

The MTS R112C cabinet is made to complement the flexible MTS amp line from Randall. All Randall cabinets are hand crafted in-house out of top quality 7-ply, 3/4" void free birch. All speaker cabinets are outfitted with various Celestion speakers. All MTS cab now includes the new crossover Mic Eliminator.

Randall MTS Series R112C 25W 1x12 Guitar Extension Cabinet - Scratch 'n' Dent Features:

• 25 Watts RMS
• 3/4" birch plywood construction
• Celestion Greenback speaker
• 8 ohm mono input

Get the right speaker cabinet for your MTS amp. Order today!

The MTS cabinet is made to complement the flexible amp line. All Randall cabinets are hand crafted in-house out of top quality 7-ply, 3/4" void free birch. Outfitted with Celestion Greenback speakers.

All MTS Cabs now include the new crossover "Mic Eliminator".

Randall MTS Series R112C 60W 1x12 Guitar Extension Cabinet Specifications:

• 60 Watts RMS
• 3/4" birch plywood construction
• Celestion Greenback speaker
• 8 ohm mono input

Get the right speaker cabinet for your MTS amp. Order today!

The MTS cabinet is made to complement the flexible amp line. All Randall cabinets are hand crafted in-house out of top quality 7-ply, 3/4" void free birch. All cabinets are outfitted with various Celestion speakers.

All MTS Cabs now include the new crossover "Mic Eliminator".

Randall MTS Series R212NXT 160W 2x12 Guitar Extension Cabinet Specifications:

• Black cloth front
• Front loaded with custom Celestion® Neodymium Speakers
• 160W
• Closed back with 1/3 removable back panel
• 29.5W x 14"D x 20"H
• 38 Lbs.

Get the right speaker cabinet for your MTS amp. Order today!

Take amplifier sound versatility to the next level.

Designed for ultimate flexibility, this revolutionary fully loaded 100-watt modular tube combo provides easy mobility without sacrificing the punchy tone of a closed back cabinet. Because it's an MTS series amp and can be loaded with any number of tube preamps, it had to be a cabinet that would work well for both rock and metal, as well as spankin' country and blues.

To do this, Randall designed the guitar amplifier with a dual back option. The amp comes from the factory basically sealed giving you the punch and tightness of a closed 2 x 12, but it also includes a 1/3 removable top panel to achieve the looser, more boomy low end found in traditional semi-open back combos.

The RM100 features a unique Palomino covering (RM100CP2) with tweed grille cloth, and comes preloaded with 3 modules! Blackace, Plexi, and XTC.

Blackface - (Based on the preamp circuit of a Fender® Blackface Twin™. Legendary clean tone with cutting mid-range and sparking highs. The standard for a wide-range of cleans.)

Plexi - (Based on the preamp circuit of a classic Marshall® Plexi. Anywhere from Page, to Angus, to Gibbons. The amp that defines 70's rock and punk tone. )

XTC - (Based on the preamp circuit of a Bogner® Ecstasy red channel. An all around great hi-gain tone with tight low end and cutting mid-range. It will cover any rock to metal tone. This one screams!)

The all tube series of amps, preamps, and combos offers incredible flexibility. The swappable MTS modular preamp components allow you to customize your set-up for a sound that's all yours.

With fourteen modules to choose from and more in the works, having an amp is as simple as plugging in a new module. Start with as few as one, or as many as you like and have all your favorite tones right at your fingertips. All modules can be used for the RM4 preamp, RM combos and RM heads. All modules utilize the same panel layout, which includes Gain, Bass, Mid, Treble and Master controls.

A bright switch is included directly under each Bass control. Each preamp module houses two 12AX7 tubes which can be easily changed or replaced. Use the thumbscrewa to remove or secure each module to the front panel of every MTS amplifier.

Randall MTS Series RM100 100W 2x12 Guitar Combo Amp with Modules Features:

• 3 module spaces
• 2 x 12" design with 2 16Ohm Celestion G12T-75s
• 100 watts
• New for 2006 - 6L6 power tubes
• Master volume
• Master density & presence
• MIDI in/thru
• Tube buffered parallel effects loops with front panel mix control
• Series effects loop
• Rear panel bias test points
• Slave output
• Includes 3 button MIDI foot controller
• World voltage AC input selector (100/120/220/240)

Get the amp that can change with you! Order today.

A half-stack's nightmare!

Designed for ultimate flexibility, this fully loaded 100-watt modular tube combo provides easy mobility without sacrificing the punchy tone of a closed-back speaker cabinet. Because it's an MTS series amp and can be loaded with any number of tube preamps, it had to be a cabinet that would work well for both rock and metal, as well as spankin' country and blues.

To do this Randall designed the amp with a black covering (RM100C) and a dual back option. The amp comes from the factory basically sealed giving you the punch and tightness of a closed 2 x 12, but it also includes a 1/3 removable top panel to achieve the looser, more boomy low end found in traditional semi-open back combos.

Randall MTS Series RM100 100W 2x12 Guitar Combo Amp without Modules Features:

• 3 module spaces
• 2 x 12" design with 2 16Ohm Celestion G12T-75s
• 100 watts
• 6L6 power tubes
• Master volume
• Master density & presence
• MIDI in/thru
• Tube buffered parallel effects loops with front panel mix control
• Series effects loop
• Rear panel bias test points
• Slave output
• Includes 3 button MIDI foot controller
• World voltage AC input selector (100/120/220/240)

Get the amp that can change with you! Order today.

A single channel with replaceable module versatility.

The Randall MTS RM20 is a 15W guitar amp head with a single channel, and JJ EL84 power tubes. This Randall amp head employs both traditional and modern technology rolled into one amplifier. The modular channel can be loaded with your choice of available tube preamp modules. Load it up with a preamp tone that fits your needs with the ability to expand your arsenal anytime a new tone is needed. Don't purchase an amplifier because you like only its clean or hi-gain tone. Equip the Randal MTS RM20 amp with your custom set-up. With more than a dozen tube preamps always available from Randall, a new tone is just a module away.

Change and bias your own power tubes. Enjoy the ease of replacing your power tubes anytime you like with the very user friendly power tube bias section found on each Randall MTS amplifier. If a tube fails, no problem, the amp will kick that tube out of the circuit and a small LED will light by the tube that fails. Replace only the small protection fuse and tube using a small voltage meter and small screwdriver to adjust each individual bias point. If you like experimenting with different tube types, the bias section allows you to pop in and bias a new set of tubes in just a few minutes.

The RM20 features a tube boost function with Gain and Level controls as well as Master Presence and Density. Choose between live mode or silent mode for direct recording using the included "Mic Eliminator" XLR output. Other pro features include a Series Effects loop, tube bias section. Includes boost footswitch.

Choose between two coverings: black (RM20HB) or palomino (RM20HP).

Randall MTS Series RM20 15W Guitar Amp Head without Modules Features:

• Single channel
• Black cloth front
• 15 watts
• EL84 tube
• Tube boost function w/Gain and Level controls
• Master volume
• Master density & presence
• Series effects loop
• Rear panel bias test points
• Includes boost footswitch
• World voltage AC input selector (100/120/220/240)

Get the amp that can change with you as your tonal needs evolve! Order today.

Don't model—MODULE with the MTS system!

The Randall MTS Series RM50HP2 is both traditional and modern technology rolled into one amplifier head. First, you have 2 independent modular channels that can be loaded with your choice and combination of the available tube preamp modules. Load each channel with a preamp tone that fits only your needs with the ability to expand your arsenal anytime a new tone is needed. Don't purchase an amplifier because you like only it's clean or high-gain tone. Build this amp with your clean, your rhythm, and your high-gain tone for a complete custom set up. With more than a dozen tube preamps always available, chances are you'll have a hard time picking just two.

Change and bias your own power tubes! Enjoy the ease of replacing your power tubes anytime you like with the very user friendly power tube bias section found on each MTS amplifier. If a tube fails, no problem, the amp will kick that tube out of the circuit and a small LED will light by the tube that fails. Replace only the small protection fuse and tube using a small voltage meter and small screwdriver to adjust each individual bias point. If you like experimenting with different tube types, the bias section allows you to pop-in and bias a new set of tubes in just a few minutes.

MIDI channel switching and capability! Connect your RM50 to any MIDI capable external processing and program individual effects to each channel. With the MIDI in/thru jacks simply select your channel and external effect, using the included MIDI footswitch, press and hold the channel switch button on the head for two seconds, and hit the store button of the processor to save the preset. The included footswitch will then select both the RM50 channel and effect you want at the same time.

The RM50HP2 features a unique Palomino covering with tweed grille cloth and comes preloaded with two modules! Blackface and Plexi.

Blackface - Based on the preamp circuit of a Fender® Blackface Twin™. Legendary clean tone with cutting mid-range and sparking highs. The standard for a wide-range of cleans.

Plexi - Based on the preamp circuit of a classic Marshall® Plexi. Anywhere from Page, to Angus, to Gibbons. The amp that defined '70s rock and punk tone.

The most flexible all-tube series of amps, preamps, and combos ever created. The swappable MTS modular preamp components allow you to customize your set up for a sound that's all yours.

You choose the tone! With 14 modules to choose from and more in the works, having a new amp is as simple as plugging in a new module. Start with as few as one or as many as you like, and have all your favorite tones right at your fingertips. All modules can be used for the RM4 preamp, RM combos, and RM heads. All modules utilize the same panel layout, which includes Gain, Bass, Mid, Treble, and Master controls.

A bright switch is included directly under each Bass control. Each preamp module houses two 12AX7 tubes which can easily be changed or replaced. Use the thumbscrew to remove or secure each module to the front panel of every MTS amplifier.

Randall MTS Series RM50HP2 50W Guitar Amp Head with Modules Features:

• 2 modules Blackface, Plexi
• 50 watts 6L6 tube
• Tweed cloth front
• Master volume
• Master density & presence
• Accutronics spring reverb
• Tube buffered parallel effects loops with front panel mix control
• Series effects loop
• Slave output
• Rear panel bias test points
• Master volume input (for volume pedals)
• Footswitch included
• World voltage AC input selector (100/120/220/240)

Get the amp that can change with you! Order today.

The perfect mate for the Vmax head.

The Randall R412XLT Speaker Cabinet has a straight-front 4 x 12" cab with angled baffle. Powder-coated protective metal grille. 7-ply 3/4" void-free birch construction. 4/16-ohm mono and 8-ohm stereo operation. Celestion Vintage 30 speakers. 280W handling. 29.5"W x 29.5"H x 14"D. 97 lbs.

Randall R412XLT Speaker Cabinet Features:

• Straight-front 4 x 12" cab with angled baffle
• Powder-coated protective metal grille
• 7-ply 3/4" void-free birch construction
• 4/16-ohm mono and 8-ohm stereo operation
• Celestion Vintage 30 speakers
• 280W handling
• 29.5"W x 29.5"H x 14"D
• 97 lbs.

Connect this baby up to the Vmax head and rip them a new one. Order today.

Rule the room.

With its four 12" Celestion speakers combining for 400W of power handling, Randall's R412XLT100 is a powerful cabinet that projects a huge wall of sound with a focused tight low end. It features Randall's useful Mic eliminator along with the choice of 4- or 16-ohm mono or 8-ohm stereo inputs. Birch construction with a powdercoated heavy metal grille front.

Randall R412XLT100 Cabinet Features:

• 400W power handling
• Four Celestion G12H-100 speakers
• Powdercoated heavy metal grille front
• Void-free birch construction
• 4 & 16 ohm mono & 8 ohm stereo inputs
• Mic eliminator XLR direct stereo outs with voicing switches

It isn't a Randall rig without a Randall cab. Order today.

A heavy hitter with power to spare!

The rugged, handcrafted cab is constructed with 3 4" 5-ply birch and is rear-loaded with Celestion Vintage 30s for big-time SPLs. Durable metal grille.

Randall RA412XL 4x12 Angled/Straight Guitar Cabinet Specifications:

• Angled cab: 29-1/2" x 29 1/2" x 14" 94 lbs.
• Straight cab: 29-1/2" x 29 1/2" x 14" 96 lbs.

Randall RA412XL 4x12 Angled/Straight Guitar Cabinet Features:

• Four Celestion Vintage 30 speakers
• 3/4" birch plywood construction

Click or call to put this bad boy in your backline!

With its four 12" Celestion speakers combining for 400 watts of power, Randall's RA412XL100 is a powerful cabinet that projects a huge wall of sound with a focused tight low end. It features Randall's useful Mic eliminator along with the choice of 4- or 16-ohm mono or 8-ohm stereo inputs. Birch construction with a black grille cloth front.

Randall RA412XL100 Cabinet Features:

• 400W power handling
• Four Celestion G12H-100 speakers
• Angled black grille cloth front
• Void-free birch construction
• 4 & 16 ohm mono & 8 ohm stereo inputs
• Mic eliminator XLR direct stereo outs with voicing switches

Save BIG when you buy today!

Randall integrity, Celestion tone, HUGE volume.

Engineered to deliver scorching tone and great looks while standing up to the rigors of touring. Loaded with 4 - 12" Celestion high-output, Vintage 30 drivers. 3/4" birch ply cab handcrafted in U.S. Metal grille. 29-1/2"H x 14"D x 29-1/2"W. 97 lbs.

Randall RA412XLT 4x12 Angled/Straight Guitar Cabinet Specifications:

• Angled: 97 lbs.
• 29-1/2"W x 29-1/2"H x 14"D
• Straight: 100 lbs.

Randall RA412XLT 4x12 Angled/Straight Guitar Cabinet Features:

• 4 Celestion 12" speakers
• Super-sturdy design
• Heavy metal grille over cloth

Say it loud and clear with full 4 x 12 impact. Make it yours today!

Tube richness combined with the solid performance of a MOSFET power amp!

100 watts come courtesy of the Valve-Dynamic power section, which combines the warmth, feel, and character of power tubes with the durability of a MOSFET power amp. 2 - 12" Celestion G12P-80 speakers provide crisp, cutting tone. The clean channel has a boost option, while the gain channel lets you choose between classic and modern voicings. Spring reverb, dual 3-band EQs, effects loop with level controls, and a line out round out the features of this powerful, expressive combo amp. Includes RF4G3 foot controller.

Randall RG100G3 G3 Series Guitar Combo Amp Features:

• 100W
• 2 - 12" Celestion G12P-80 speakers
• Valve-Dynamic tube/MOSFET power section
• Clean channel with boost
• Gain channel with classic and modern voicings and contour control
• Spring reverb
• Dual 3-band EQs
• Effects loop with level controls
• Line out

Randall tone with a new twist that makes it more versatile than ever! Call or click to order now.

Lead-style powerhouse with 4-mode versatility.

The Randal RG50TC 50W 1x12 Guitar Combo Amp puts out 50W of power from 2 EL34EH tubes to drive a 12" Celestion speaker. 2-channels with 4 modes: overdrive channel with 2 gain stages, vintage and modern hi-gain stages for the overdrive channel; footswitchable boost mode on the clean channel. External speaker outs and effects loop. Includes 4-button footswitch.

Randall RG50TC 50W 1x12 Guitar Combo Amp Features:

• 50W tube power
• 2 EL34EH power tubes
• 12" Celestion speaker
• 2 channels with 4 modes
• Vintage and modern hi-gain stages on overdrive channel
• Footswitchable boost on clean channel
• External speaker outs
• Effects loop
• Includes 4-button foot switch
• 26"W x 20"H x 14"D
• 45 lbs.

You'll the power, love the tone, and you'll love the price. Order today and treat yourself to a real amp.

The convenience of solid state, the sound of tube power.

The Randall RG75DG3 G3 Guitar Combo is a sweet combo amplifier with impressive Valve-Dymanic technology, combining the best of tube sound and solid state convenience. A 12" Celestion Seventy 80 speaker sounds killer with any one of the many settings you can choose. Includes an effects loop and a foot controller to maximize your control without taking your hands off the guitar.

Randall RG75DG3 G3 Guitar Combo Amp Features:

• 75W combo with new "Valve-Dynamic" power
• 1 x 12" Celestion Seventy 80
• 2 channels w/3 modes
• Gain 1: Classic hi-gain
• Gain 2: Modern hi-gain
• Voicing and Contour controls
• Clean channel w/boost option
• Dual 3-band EQ's
• 12AT7 tube driven MOSFET power circuit
• Effects loop w/level controls
• Line out
• RF4G3 foot controller included

Call or click today to order.

The convenience of solid state, the sound of tube power.

The Randall RG75DG3 G3 Guitar Combo is a sweet combo amplifier with impressive Valve-Dymanic technology, combining the best of tube sound and solid state convenience. A 12" Celestion Seventy 80 speaker sounds killer with any one of the many settings you can choose. Includes an effects loop and a foot controller to maximize your control without taking your hands off the guitar.

Randall RG75DG3 G3 Guitar Combo Amp Factory B-Stock Features:

• 75W combo with new "Valve-Dynamic" power
• 1 x 12" Celestion Seventy 80
• 2 channels w/3 modes
• Gain 1: Classic hi-gain
• Gain 2: Modern hi-gain
• Voicing and Contour controls
• Clean channel w/boost option
• Dual 3-band EQ's
• 12AT7 tube driven MOSFET power circuit
• Effects loop w/level controls
• Line out
• RF4G3 foot controller included

Call or click today to order.

The RH150DG3 represents a new twist on hybrid amps plus killer digital effects!

The RH150DG3 guitar amplifier will take your tone to new places with its 150W Valve-Dynamic tube/MOSFET power section and built-in digital effects. The clean channel has a boost option, while the gain channel lets you choose between classic and modern voicings. 16 - 24-bit digital effects, dual 3-band EQs, effects loop with level controls, and a line out round out the features of this powerful, expressive amp. Includes 4-button footswitch.

Randall RH150DG3 G3 Series Guitar Amp Head Features:

• 150W
• 2 channels
• Valve-Dynamic tube/MOSFET power section
• Clean channel with boost
• Gain channel with classic and modern voicings and contour control
• 16 - 24-bit digital effects
• Dual 3-band EQs
• Effects loop with level controls
• Line out

Tons of versatile power and digital effects to take your music to the next level. Call or click to order now!