Randall has broken the barrier between tube and solid-state.

The RH300G3 guitar amplifier takes guitar tone to new and exciting levels with its 300W Valve-Dynamic tube/MOSFET power section. The clean channel has a boost option, while the gain channel lets you choose between classic and modern voicings. Onboard spring reverb, dual 3-band EQs, effects loop with level controls, and a line out round out the features of this powerful, expressive amp. Includes 4-button footswitch.

Randall RH300G3 G3 Series Guitar Amp Head - Scratch 'n' Dent Features:

• 300W
• Valve-Dynamic tube/MOSFET power section
• Clean channel with boost
• Gain channel with classic and modern voicings and contour control
• Spring reverb
• Dual 3-band EQs
• Effects loop with level controls
• Line out

Randall tone with a new twist that makes it more versatile than ever! Call or click to order now.

Shape it to your exact tonal preferences by configuring the RM100C1 with any of 18 preamps 3 at a time!

Includes all-tube Clean, Treadplate, and Ultra plug-in preamp modules. A pair of Celestion G12T-75s translate all that tubal purity into rich tone! Cab comes fully closed-back with removable panel to make it semi-open back.

This highly versatile 3-channel combo melds tradition and technology. 3 independent channels can be loaded with your choice of any of the available tube preamp modules. Set this head up with tones that exactly fit your needs, then expand your arsenal anytime you like.

Enjoy the ease of replacing your power tubes anytime you like, with the very user-friendly power tube bias section. If a tube fails, no problem, the amp will kick that tube out of the circuit, and a small LED will light by the tube that fails.

Connect your RM100B to any MIDI-capable external processor and program individual effects to each channel. With the MIDI in/thru, simply select your channel and external effect, using the included RF3 MIDI footswitch. The footswitch will select both the RM100 channel and effect you want at the same time.

So, if you need the volume and power only a head will offer, choose one that will adapt to your styles.

All modules include 2 - 12AX7 preamp tubes, 3 band EQ with bright switch, and level control.

See recommended accessories on this page to choose from the following modules to build your own custom combination of tones:

Ultra Module Brown Module Clean Module SL+ Module Plexi Module JTM Module Top Boost Module Tweed Module Blackface Module DLX Module

Randall RM100C1 Tube Combo Amp Features:

• Holds any 3 of Randall's preamp modules
• 100 Watts
• Slotted grille front
• EL34 Ruby Power tubes
• 2 x 12" Celestion G12T-75 speakers
• Semi-open or closed-back cab
• MIDI in/thru
• Master Volume, Presence, Density controls
• Parallel loop with front panel mix control
• Series loop
• Rear tube bias section
• Slave out
• 3-button MIDI footswitch included
• 29"W x 23"H x 14"D
• 72 lbs.

Versatility and authenticity! Order today with the assurance of our Dual Guarantees!

Shape it to your exact tonal preferences by configuring the RM100C2 with any of 18 preamps 3 at a time!

Includes all-tube Blackface, Plexi, and XTC plug-in preamp modules. A pair of Celestion G12T-75s translate all that tubal purity into rich tone! Cab comes fully closed-back with removable panel to make it semi-open back.

This highly versatile 3-channel combo melds tradition and technology. 3 independent channels can be loaded with your choice of any of the available tube preamp modules. Set this head up with tones that exactly fit your needs, then expand your arsenal anytime you like.

Enjoy the ease of replacing your power tubes anytime you like, with the very user-friendly power tube bias section. If a tube fails, no problem, the amp will kick that tube out of the circuit, and a small LED will light by the tube that fails.

Connect your RM100B to any MIDI-capable external processor and program individual effects to each channel. With the MIDI in/thru, simply select your channel and external effect, using the included RF3 MIDI footswitch. The footswitch will select both the RM100 channel and effect you want at the same time.

So, if you need the volume and power only a head will offer, choose one that will adapt to your styles.

All modules include 2 - 12AX7 preamp tubes, 3 band EQ with bright switch, and level control.

See recommended accessories on this page to choose from the following modules to build your own custom combination of tones:

Ultra Module Brown Module Clean Module SL+ Module Plexi Module JTM Module Top Boost Module Tweed Module Blackface Module DLX Module

Randall RM100C2 100 Watt 2x12 Tube Combo Amp with Blackface, Plexi, and XTC Preamp Modules Features:

• Holds any 3 of Randall's preamp modules
• 100 Watts
• Slotted grille front
• EL34 Ruby Power tubes
• 2 - 12" Celestion G12T-75 speakers
• Semi-open or closed-back cab
• MIDI in/thru
• Master Volume, Presence, Density controls
• Parallel loop with front panel mix control
• Series loop
• Rear tube bias section
• Slave out
• 3-button MIDI footswitch included
• 29"W x 23"H x 14"D
• 72 lbs.

Versatility and authenticity! Order today with the assurance of our Dual Guarantees!

Shape it to your exact tonal preferences by configuring the RM100C2 with any of 18 preamps 3 at a time!

Includes all-tube Blackface, Plexi, and XTC plug-in preamp modules. A pair of Celestion G12T-75s translate all that tubal purity into rich tone! Cab comes fully closed-back with removable panel to make it semi-open back.

This highly versatile 3-channel combo melds tradition and technology. 3 independent channels can be loaded with your choice of any of the available tube preamp modules. Set this head up with tones that exactly fit your needs, then expand your arsenal anytime you like.

Enjoy the ease of replacing your power tubes anytime you like, with the very user-friendly power tube bias section. If a tube fails, no problem, the amp will kick that tube out of the circuit, and a small LED will light by the tube that fails.

Connect your RM100B to any MIDI-capable external processor and program individual effects to each channel. With the MIDI in/thru, simply select your channel and external effect, using the included RF3 MIDI footswitch. The footswitch will select both the RM100 channel and effect you want at the same time.

So, if you need the volume and power only a head will offer, choose one that will adapt to your styles.

All modules include 2 - 12AX7 preamp tubes, 3 band EQ with bright switch, and level control.

See recommended accessories on this page to choose from the following modules to build your own custom combination of tones:

Ultra Module Brown Module Clean Module SL+ Module Plexi Module JTM Module Top Boost Module Tweed Module Blackface Module DLX Module

Randall RM100C2 100 Watt 2x12 Tube Combo Amp with Blackface, Plexi, and XTC Preamp Modules - Scratch 'n' Dent Features:

• Holds any 3 of Randall's preamp modules
• 100 Watts
• Slotted grille front
• EL34 Ruby Power tubes
• 2 - 12" Celestion G12T-75 speakers
• Semi-open or closed-back cab
• MIDI in/thru
• Master Volume, Presence, Density controls
• Parallel loop with front panel mix control
• Series loop
• Rear tube bias section
• Slave out
• 3-button MIDI footswitch included
• 29"W x 23"H x 14"D
• 72 lbs.

Versatility and authenticity! Order today with the assurance of our Dual Guarantees!

Shape it to your exact tonal preferences by configuring the RM100M with YOUR choice of 3 preamps!

This highly versatile Randall RM100M 100 Watt 3-channel Guitar Amplifier Head melds tradition and technology. 3 independent channels can be loaded with your choice of any of the available tube preamp modules from Randall (modules sold separately). Set this head up with tones that exactly fit your needs, then expand your arsenal anytime you like.

Enjoy the ease of replacing your power tubes anytime you like, with the very user-friendly power tube bias section. If a tube fails, no problem, the amplifier will kick that tube out of the circuit, and a small LED will light by the tube that fails.

Connect your RM100M amp head to any MIDI-capable external processor and program individual effects to each channel. With the MIDI in/thru, simply select your channel and external effect, using the included RF3 MIDI footswitch. The footswitch will select both the RM100 channel and effect you want at the same time.

So, if you need the volume and power only a head will offer, choose one that will adapt to your styles.

All optional modules include 2 - 12AX7 preamp tubes, 3 band EQ with bright switch, and level control.

Choose from the following modules to build your own custom combination of tones:
Ultra Module
Brown Module
Clean Module
Dual Treadplate Style Preamp Module
SL+ Module
Plexi Module
JTM Module
Top Boost Module
Tweed Module
Blackface Module
DLX Module

Randall RM100M Empty 3 Module 100W Guitar Amp Head Features:

• Holds any 3 of Randall's preamp modules
• 100 Watts
• Slotted grille front
• EL34 Ruby Power tubes
• MIDI in/thru
• Master Volume, Presence, Density controls
• Parallel loop with front panel mix control
• Series loop
• Rear tube bias section
• Slave out
• 3-button MIDI footswitch included

Versatility and authenticity! Order today with the assurance of our Dual Guarantees!

Shape it to your exact tonal preferences by configuring the RM100M with any of 18 preamps 3 at a time!

Includes all-tube Clean, Treadplate, and Ultra plug-in preamp modules.

This highly versatile 3-channel head melds tradition and technology. 3 independent channels can be loaded with your choice of any of the available tube preamp modules. Set this head up with tones that exactly fit your needs, then expand your arsenal anytime you like.

Enjoy the ease of replacing your power tubes anytime you like, with the very user-friendly power tube bias section. If a tube fails, no problem, the amp will kick that tube out of the circuit, and a small LED will light by the tube that fails.

Connect your RM100B to any MIDI-capable external processor and program individual effects to each channel. With the MIDI in/thru, simply select your channel and external effect, using the included RF3 MIDI footswitch. The footswitch will select both the RM100 channel and effect you want at the same time.

So, if you need the volume and power only a head will offer, choose one that will adapt to your styles.

All modules include 2 - 12AX7 preamp tubes, 3 band EQ with bright switch, and level control.

See recommended accessories on this page to choose from the following modules to build your own custom combination of tones:

Ultra Module Brown Module Clean Module SL+ Module Plexi Module JTM Module Top Boost Module Tweed Module Blackface Module DLX Module

Randall RM100M1 Tube Amp Head Features:

• Holds any 3 of Randall's preamp modules
• 100 Watts
• Slotted grille front
• EL34 Ruby Power tubes
• MIDI in/thru
• Master Volume, Presence, Density controls
• Parallel loop with front panel mix control
• Series loop
• Rear tube bias section
• Slave out
• 3-button MIDI footswitch included
• 29"W x 12"H x 11"D
• 35 lbs.

Versatility and authenticity! Order today with the assurance of our Dual Guarantees!

Shape it to your exact tonal preferences by configuring the RM100M with any of 18 preamps 3 at a time!

Includes all-tube Blackface, Plexi, and XTC plug-in preamp modules.

This highly versatile 3-channel head melds tradition and technology. 3 independent channels can be loaded with your choice of any of the available tube preamp modules. Set this head up with tones that exactly fit your needs, then expand your arsenal anytime you like.

Enjoy the ease of replacing your power tubes anytime you like, with the very user-friendly power tube bias section. If a tube fails, no problem, the amp will kick that tube out of the circuit, and a small LED will light by the tube that fails.

Connect your RM100B to any MIDI-capable external processor and program individual effects to each channel. With the MIDI in/thru, simply select your channel and external effect, using the included RF3 MIDI footswitch. The footswitch will select both the RM100 channel and effect you want at the same time.

So, if you need the volume and power only a head will offer, choose one that will adapt to your styles.

All modules include 2 - 12AX7 preamp tubes, 3 band EQ with bright switch, and level control.

See recommended accessories on this page to choose from the following modules to build your own custom combination of tones:

Ultra Module Brown Module Clean Module SL+ Module Plexi Module JTM Module Top Boost Module Tweed Module Blackface Module DLX Module

Randall RM100M2 100-Watt Tube Amp Head with Blackface, Plexi, and XTC Preamp Modules Features:

• Includes all-tube Blackface, Plexi, and XTC plug-in preamp modules
• Holds any 3 of Randall's preamp modules
• 100 Watts
• Slotted grille front
• EL34 Ruby Power tubes
• MIDI in/thru
• Master Volume, Presence, Density controls
• Parallel loop with front panel mix control
• Series loop
• Rear tube bias section
• Slave out
• 3-button MIDI footswitch included
• 29"W x 12"H x 11"D
• 35 lbs.

Versatility and authenticity! Order today with the assurance of our Dual Guarantees!

A world of plug-in possibilities for the pro who doesn't need to blast the walls down.

PA amps produce a gazillion watts so your guitar rig doesn't have to. If, like most of us who've been playing awhile, you find too often that people complain about your volume when you turn the amp up loud enough to perform at its best, the Randall RM20B is your cup of tea. 15 all-tube watts come out of Ruby EL84s and run through a 12" Celestion Greenback for pure tube brilliance and ready response. Best of all is the preamp slot that handles any one of 18 available Randall all-tube plug-in preamps physically built after the preamps of the world's greatest amps.

Other high-end features include master density and presence controls, footswitchable tube boost function, boost gain and level controls, standby switch, series effects loop, XLR mic eliminator direct out, 8/16 ohm extension speaker output, slave output, rear panel tube bias test points for biasing your own tubes, and world voltage AC input selector (100/120/220/240).

Featuring a single modular channel with a footswitchable tube boost, the RM20 can take a lower to mid-gain module from pristine clean to sustaining lead tone at the click of a switch by simply activating the included tube boost function. Use the tube boost gain control to add a desired amount of additional saturation then adjust the boost level control for the desired boost volume.

For all modules, especially the higher gain tones, the tube boost function can be used as a volume boost without adding additional saturation by simply rolling out the boost gain and adjusting the amount of boost volume.

Randall RM20B 15-Watt 1x12 Modular Tube Combo Amp Features:

• Preamp slot handles one of 18 available Randall all-tube plug-in preamps
• 15W from Ruby EL84s
• 12" Celestion Greenback speaker
• Master density and presence controls
• Footswitchable tube boost function
• Boost gain and level controls
• Standby switch
• Series effects loop
• XLR mic eliminator direct out
• 8/16 ohm extension speaker output
• Slave output
• Rear panel tube bias test points
• World voltage AC input selector
• 20"W x 22"H x 13"D
• 35 lbs.

Buy this one amp today and you've opened the door to buying 18 classics for relatively little outlay.

The unparalleled flexibility of removable all-tube preamps 2 at a time.

18 independent hot-swappable plug-in preamps are available. Physically designed after the preamp sections of the world's greatest amps, they generate unparalleled purity of tone in all styles. The RM50B accommodates any combination of 2 classic or modern amps, simply by plugging in your choice of tube preamp modules. Designed for the club professional who is looking for an all-tube amp with multiple tones. The RM50 gives you 50W of power using Ruby 6L6 tubes, a 12" Celestion G12 Century speaker, and 2 modular channels for plugging in Randall preamps. Controls include master volume, master density and presence controls, and front panel mix control. Connections include a tube-buffered parallel effects loop, series effects loop, slave out, rear master input (for volume pedal), and rear bias test points.

Randall RM50B 50-Watt 1x12" Modular Tube Combo Amp Features:

• 50W of power using Ruby 6L6 tubes
• 12" Celestion G12 Century speaker
• 2 modular channels for plugging in Randall preamps
• Master volume, master density and presence controls, and front panel mix control
• Tube-buffered parallel effects loop
• Series effects loop
• World voltage AC input selector
• Slave out
• Rear master input (for volume pedal)
• Rear bias test points
• 19"W x 25"H x 13"D
• 55 lbs.

Go modular and start collecting your favorite preamps.

The unparalleled flexibility of removable all-tube preamps 2 at a time.

18 independent hot-swappable plug-in preamps are available. Physically designed after the preamp sections of the world's greatest amps, they generate unparalleled purity of tone in all styles. The Randall RM50HB becomes any combination of classic or modern amps, simply by plugging in your choice of tube preamp modules. Designed for the club professional who is looking for an all-tube amp with multiple tones. The RM50B gives you 50W of power using Ruby 6L6 tubes and 2 modular channels for plugging in Randall preamps. Controls include master volume, master density and presence controls, and front panel mix control. Connections include a tube-buffered parallel effects loop, series effects loop, slave out, rear master input (for volume pedal), and rear bias test points.

Randall RM50HB 50-Watt Modular Tube Amp Head Features:

• 50W of power using Ruby 6L6 tubes
• 2 modular channels for plugging in Randall preamps
• Master volume, master density and presence controls, and front panel mix control
• Tube-buffered parallel effects loop
• Series effects loop
• Slave out
• Rear master input (for volume pedal)
• Rear bias test points
• World voltage AC input selector
• 25"W x 13"H x 10"D
• 32 lbs.

Go modular and start collecting your favorite preamps.

The unparalelled flexibility of removeable all-tube preamps 2 at a time.

Includes Blackface and Plexi all-tube plug-in preamp modules. 18 independent hot-swappable plug-in preamps are available. Physically designed after the preamp sections of the world's greatest amps, they generate unparalleled purity of tone in all styles. The Randall RM50HB2 becomes any combination of classic or modern amps, simply by plugging in your choice of tube preamp modules. Designed for the club professional who is looking for an all-tube amp with multiple tones. The RM50B gives you 50W of power using Ruby 6L6 tubes and 2 modular channels for plugging in Randall preamps. Controls include master volume, master density and presence controls, and front panel mix control. Connections include a tube-buffered parallel effects loop, series effects loop, slave out, rear master input (for volume pedal), and rear bias test points.

Randall RM50HB2 50-Watt Modular Tube Amp Head with Blackface and Plexi Modules Features:

• Includes Blackface and Plexi all-tube plug-in preamp modules
• 50W of power using Ruby 6L6 tubes
• 2 modular channels for plugging in Randall preamps
• Master volume, master density and presence controls, and front panel mix control
• Tube-buffered parallel effects loop
• Series effects loop
• Slave out
• Rear master input (for volume pedal)
• Rear bias test points
• World voltage AC input selector
• 25"W x 13"H x 10"D
• 32 lbs.

Go modular and start collecting your favorite preamps.

The unparalleled flexibility of removable all-tube preamps 2 at a time.

Includes Blackface and Plexi all-tube plug-in preamp modules and a slick-looking Titanium silver grille cloth. 18 independent hot-swappable plug-in preamps are available. Physically designed after the preamp sections of the world's greatest amps, they generate unparalleled purity of tone in all styles. The RM50B accommodates any combination of 2 classic or modern amps, simply by plugging in your choice of tube preamp modules. Designed for the club professional who is looking for an all-tube amp with multiple tones. The RM50 gives you 50W of power using Ruby 6L6 tubes, a 12" Celestion G12 Century speaker, and 2 modular channels for plugging in Randall preamps. Controls include master volume, master density and presence controls, and front panel mix control. Connections include a tube-buffered parallel effects loop, series effects loop, slave out, rear master input (for volume pedal), and rear bias test points.

Randall RM50S2 50-Watt 1x12" Modular Tube Combo Amp with Blackface and Plexi Preamp Modules. Features:

• Blackface and Plexi preamp modules
• Titanium silver grille cloth
• 50W of power using Ruby 6L6 tubes
• 12" Celestion G12 Century speaker
• 2 modular channels for plugging in Randall preamps
• Master volume, master density and presence controls, and front panel mix control
• Tube-buffered parallel effects loop
• Series effects loop
• World voltage AC input selector
• Slave out
• Rear master input (for volume pedal)
• Rear bias test points
• 19"W x 25"H x 13"D
• 55 lbs.

Go modular and start collecting your favorite preamps.

About as crunch-capable as a single box can get.

The Randall RS125CX 2X12" 1X15" Speaker Cabinet is loaded with 2 - 12" Eminence Legends on top and a 15" Eminence Legend on the bottom. Deep front ports provide extended yet tight low-end bass response. 240W RMS power handling. Rugged, void-free birch ply cabinet. 30"W x 33"H x 14"D. 88 lbs.

Randall RS125CX 2X12" 1X15" Speaker Cabinet Specifications:

• 240W RMS power handling
• 30"W x 33"H x 14"D
• 88 lbs.

Randall RS125CX 2X12" 1X15" Speaker Cabinet Features:

• 2 - 12" Eminence Legends on top
• 15" Eminence Legend on the bottom
• Deep front ports for extended, tight low-end Rugged, void-free birch ply cabinet

One cab that can handle anything you might come up against. Order today and be ready.

Think big.

The RS412XC is a roadworthy cabinet with a huge, defined tone with an extended low end. Four Celestion Seventy 80 speakers combine for 320 watts of power in a rugged plywood enclosure with a black cloth front. Features 8 ohm mono and 4 ohm stereo inputs.

Randall RS412XC 4 x 12 Speaker Cabinet Features:

• 320W power handling
• 4 Celestion Seventy 80 speakers
• Straight front with black cloth
• Plywood construction
• 8 ohm mono and 4 ohm stereo inputs

Order RS412XC and get even with all those bullies who made you suffer.

Rule the room.

With its 4 - 12" Celestion speakers combining for 400W of power, Randall's RS412XL100 is a powerful cabinet that projects a huge wall of sound with a focused, tight low end. It features Randall's useful Mic eliminator for recording along with the choice of 4- or 16-ohm mono or 8-ohm stereo inputs. Birch construction with a black grille cloth front.

Randall RS412XL100 Cabinet Features:

• 400W power handling
• Four Celestion G12H-100 speakers
• Straight black grille cloth front
• Void-free birch construction
• 4 & 16 ohm mono & 8 ohm stereo inputs
• Mic eliminator XLR direct stereo outs with voicing switches

It isn't a Randall rig without a Randall cab. Order today.

Rule the room.

With its four 12" Celestion speakers combining for 400 watts of power handling, Randall's RS412XLT100 is a powerful cabinet that projects a huge wall of sound with a focused, tight low end. It features Randall's useful Mic eliminator for recording along with the choice of 4- or 16-ohm mono or 8-ohm stereo inputs. Birch construction with a powder coated heavy metal grille front.

Randall RS412XLT100 Cabinet Features:

• 400W power handling
• Four Celestion G12H-100 speakers
• Straight powdercoated heavy metal grille front
• Void-free birch construction
• 4 & 16 ohm mono & 8 ohm stereo inputs
• Mic eliminator XLR direct stereo outs with voicing switches

It isn't a Randall rig without a Randall cab. Order today.

The perfect power amp for pairing with the RM4 preamp.

The Randall RT2-50 is a 50W/50W 2-channel stereo power amp. It can switched via MIDI or is footswitchable with RF4 foot controller. Comes with 6L6s in Channel 1, and EL34s in Channel 2. Each channel has master volume, presence, and density controls; MIDI in/thru; and 4-, 8-, or 16-ohm switch. Paired with RM4 preamps, the switchable channels with different tube arrays let you create classic amp sounds with even greater realism.

Randall RT2-50 50w/50w Stereo Tube Power Amplifier Features:

• 50W/50W
• 2-channels
• Footswitchable with the RF4 foot controller or via MIDI
• 6L6s in Channel 1
• EL34s in Channel 2
• Each channel has master volume, presence, and density controls
• MIDI in/thru
• 4, 8, or 16-ohm switch

Order today and pair it with RM4 preamps for a killer rig.

The perfect power amp for pairing with the RM4 preamp.

The Randall RT2-50 is a 50W/50W 2-channel stereo power amp. It can switched via MIDI or is footswitchable with RF4 foot controller. Comes with 6L6s in Channel 1, and EL34s in Channel 2. Each channel has master volume, presence, and density controls; MIDI in/thru; and 4-, 8-, or 16-ohm switch. Paired with RM4 preamps, the switchable channels with different tube arrays let you create classic amp sounds with even greater realism.

Randall RT2-50 50w/50w Stereo Tube Power Amplifier - Scratch 'n' Dent Features:

• 50W/50W
• 2-channels
• Footswitchable with the RF4 foot controller or via MIDI
• 6L6s in Channel 1
• EL34s in Channel 2
• Each channel has master volume, presence, and density controls
• MIDI in/thru
• 4, 8, or 16-ohm switch

Order today and pair it with RM4 preamps for a killer rig.

A gig-ready head with serious sound for a sweet price.

Huge sound in a smaller package is the best way to describe the RX120RH from Randall's RX Series. Their mission to deliver a more affordable guitar amp that achieves the tone of much larger combos and stacks has developed into quite a powerhouse. The RX tone circuits are designed to achieve the modern Randall tone that delivers plenty of tight lows as well as enough top end sizzle to satisfy any metal monster. The result is an overwhelming sound that may change your definition of the modern practice amp. Built-in spring reverb.

Randall RX Series RX120RH 120W Guitar Amp Head Features:

• RX120RH includes 120 watts
• 2-channels
• Overdrive channel with Voicing and Contour control
• Clean channel
• Spring Reverb with level control
• 2-button footswitch included
• 200W RX412 includes
• 4 x 12" Randall 50W Jaguars

Make it yours for this amazing price. Order now!

The perfect starter amp for the up & coming shredder.

The compact 2-channel RX15M guitar amplifier from Randall has a huge high gain tone and almost acoustic like clean channel for any type of musical taste or style.

Randall RX Series RX15M 15W 1x6.5 Guitar Combo Amp Specifications:

• 2 Channels
• CH. 1: Clean
• CH. 2: Overdrive with Boost
• EQ CONTROLS: Bass, Middle, Treble
• MASTER CONTROLS: Volume
• POWER AMP: Solid State
• POWER OUTPUT: 12 Watts
• SPEAKER: 1 x 6.5" Randall Jaguar

Randall RX Series RX15M 15W 1x6.5 Guitar Combo Amp Features:

• Tape/CD Input
• Headphones Jack
• Powder Coated Metal Grill

It's small but covers both sides of the tonal coin beutifully. Order today.