A great practice amplifier for home or rehearsal.

The 2-channel 25W Randall RX25RM combo uses a 10" jaguar speaker for big high gain tone and a fat clean sound.

Randall RX Series RX25RM 25W 1x10 Guitar Combo Amp Specifications:

• 2 Channels
• CH. 1: Clean
• CH. 2: Overdrive with Boost
• EQ CONTROLS: Bass, Middle, Treble
• MASTER CONTROLS: Volume
• POWER AMP: Solid State
• POWER OUTPUT: 25 Watts
• SPEAKER: 1 x 10" Randall Jaguar

Randall RX Series RX25RM 25W 1x10 Guitar Combo Amp Features:

• Spring Reverb
• Series EFX Loop
• Tape/CD Input
• Headphones Jack
• Powder Coated Metal Grille

Get great tone wherever you're rehearsing. Call or click now to order.

Huge sound on a budget.

Randall's mission to deliver an amp line that achieves the tone of much larger combos and stacks has developed into quite a powerhouse and the RX35DM does just that! The RX tone circuits are designed to achieve the modern Randall tone, which deliver plenty of tight low's, as well as enough top end sizzle to satisfy any metal monster. The result is an overwhelming sound that will redefine the modern practice amp. This guitar amp is loaded with 15 digital effects and a 3-band graphic EQ.

Randall RX Series RX35DM 35W 1x12 Guitar Combo Amp Specifications:

• PREAMP CHANNELS
• 2 Channels
• CH. 1: Clean
• CH. 2: Overdrive with Boost
• EQ CONTROLS
• Bass Middle Treble
  
  MASTER CONTROLS
• Volume
• POWER AMP
• Solid State
  
  POWER OUTPUT
• 35 Watts
  
  SPEAKER
• 1 x 12" Randall Jaguar

Randall RX Series RX35DM 35W 1x12 Guitar Combo Amp Features:

• 15 Digital EFX
• Series EFX Loop
• Tape/CD Input
• Powder Coated Metal Grill
• Footswitch Included
• V2XM
• 3 Band Graphic EQ

Make it yours for this amazing price. Order now!

A perfect practice or jam amp for the up & coming shredder.

The 40-watt V2XM has 2 channels with a 3-band graphic for dialing in precise rock and metal tone. Built with a 12" Jaguar speaker this high gain combo is big and loud enough to handle almost any situation.

Randall RX Series V2XM 30W 1x12 Guitar Combo Amp Features:

• 2 Channels
• CH. 1: Clean
• CH. 2: Overdrive with Boost
• EQ CONTROLS: Bass, Middle, Treble
• 3-band graphic EQ: 100Hz, 1K, 5K
• MASTER CONTROLS: Volume
• POWER AMP: Solid State
• POWER OUTPUT: 30 watts
• SPEAKER: 12" Celestion Rocket 50 speaker
• Headphone jack
• Tape/CD Input

Get that Randall sound in an easy-to-haul unit. Call or click today to order.

Lots of muscle and a big digital brain!

The Randall RX120DHS Half Stack features 16 digital effects, 2 channels with mid contour control on the overdrive channel, dual 3-band EQs, an effects loop, headphone out, CD/tape input, master volume, and 120 scorching watts. The cab sports 4 of Randall's custom heavy-magnet Jaguar 50 speakers for a room-shaking half stack that kicks out fabulous tone with enough volume for any gig.

Randall RX120DHS 120W Half Stack Guitar Amp with 4x12 Cabinet Features:

• 120W
• 4 - 12" 50W Randall Jaguar 50 speakers
• 2 channels: Clean channel, Overdrive with mid contour control
• 16 digital effects
• Dual 3-band EQs
• Effects loop
• Headphone out
• CD/tape input
• Master volume
• 2-button footswitch included
• 27"W x 27"H x 14"D

Put it in the cart for serious power and flexible features at a very reasonable price.

Big, modern sound in an entry-priced package!

This half stack includes the Randall RX Series RX120RH 120W Guitar Amp Head and the Randall RX412 Speaker Cabinet. Randall's goal was to develop a more affordable guitar amp with the tone of much larger combo amps and stacks. The RX tone circuits deliver a modern Randall tone with plenty of tight lows and enough top-end sizzle to satisfy any metal guitarist.

The RX412 speaker cabinet delivers a sound that rivals the tone and power of much larger, more expensive boxes thanks to its 4 - 12" Jaguar speakers.

Randall RX120RH and RX412 Half Stack Features:

• Randall RX Series RX120RH 120W Guitar Amp Head
• 
  
• RX120RH includes 120 watts
• 2-channels
• Overdrive channel w/Voicing and Contour control
• Clean channel
• Spring Reverb w/level control
• 2-button footswitch included
• 200W RX412 includes
• 4 x 12" Randall 50W Jaguars
  
  Randall RX412 Cabinet
  
• 200W cabinet
• Four 12" Randall Jaguar speakers
• Black cloth grille
• Plywood construction
• 8 ohm mono input

Make it yours. Order now!

Randall's RX412 cabinet delivers huge sound that rivals the tone and power of much larger, more expensive boxes. Much of its power comes from the four 12" Randall Jaguar speakers, but throw in the RX tone circuits and it delivers plenty of tight lows and enough top end sizzle to satisfy any metal monster.

Randall RX412 Cabinet Features:

• 200W cabinet
• Four 12" Randall Jaguar speakers
• Black cloth grille
• Plywood construction
• 8 ohm mono input

Save BIG when you buy today!

Big, deadly, and totally equipped.

Designed with a simple, straight ahead
front panel layout and a shorter, less complex signal path, the Randall T2 Amp Head produces an extremely powerful, punishing tone. A true 3-mode amplifier, the T2 offers a wide range of tones to fit any playing style while seriously catering to those who hunger for gain.

A revolutionary power circuit called "Valve-Dynamic" is the engine that drives this new high-powered head. This tube driven MOSFET power section is driven by a 12AT7 for natural tube feel and compression, but the key to this power circuit is the accuracy in frequency response of a full 100W tube power amp, resulting in dynamic all-tube tone, feel, and response.

Product Details
A 2-channel all-tube preamp with 3 modes
Mode 3: A boosted overdrive with punishing gain and liquid sustain.
Mode 2: Classic overdrive channel for vintage to modern tube tone .
Mode 1: Full tube clean with warm tone and big headroom.
400W @ 4 Ohms, 280W @ 8 Ohms, 500W @ 2 Ohms
3 MIDI-switching channels
Programmable "Series" or "Parallel" Effects loop with single on/off switch. Can also be activated for any/all channels then stored and recalled by the included MIDI foot controller.
Gain and Level controls for both channels.
Master "Density" control. Adjusts the power amp low-end dynamics.
Master "Presence" control. Adjusts the power amp extreme high end dynamics
MIDI in/thru
Mic Eliminator XLR direct recording output
World voltage selector/AC inlet

Randall T2 Amp Head Features:

• 400W power @ 4 ohms
• A true 3-mode amplifier
• Tube-driven Mosfet power section
• 2-channel all-tube preamp
• 3 MIDI-switching channels
• Included MIDI foot controller
• Programmable "Series" or "Parallel" Effects loop with single on/off switch
• Gain and Level controls for both channels
• Master Density control
• Master Presence control
• Mic Eliminator XLR direct recording output

Call or click today to order.

Big, deadly, and totally equipped.

Designed with a simple, straight ahead
front panel layout and a shorter, less complex signal path, the Randall T2 Amp Head produces an extremely powerful, punishing tone. A true 3-mode amplifier, the T2 offers a wide range of tones to fit any playing style while seriously catering to those who hunger for gain.

A revolutionary power circuit called "Valve-Dynamic" is the engine that drives this new high-powered head. This tube driven MOSFET power section is driven by a 12AT7 for natural tube feel and compression, but the key to this power circuit is the accuracy in frequency response of a full 100W tube power amp, resulting in dynamic all-tube tone, feel, and response.

Product Details
A 2-channel all-tube preamp with 3 modes
Mode 3: A boosted overdrive with punishing gain and liquid sustain.
Mode 2: Classic overdrive channel for vintage to modern tube tone .
Mode 1: Full tube clean with warm tone and big headroom.
400W @ 4 Ohms, 280W @ 8 Ohms, 500W @ 2 Ohms
3 MIDI-switching channels
Programmable "Series" or "Parallel" Effects loop with single on/off switch. Can also be activated for any/all channels then stored and recalled by the included MIDI foot controller.
Gain and Level controls for both channels.
Master "Density" control. Adjusts the power amp low-end dynamics.
Master "Presence" control. Adjusts the power amp extreme high end dynamics
MIDI in/thru
Mic Eliminator XLR direct recording output
World voltage selector/AC inlet

Randall T2 Amp Head - Scratch 'n' Dent Features:

• 400W power @ 4 ohms
• A true 3-mode amplifier
• Tube-driven Mosfet power section
• 2-channel all-tube preamp
• 3 MIDI-switching channels
• Included MIDI foot controller
• Programmable "Series" or "Parallel" Effects loop with single on/off switch
• Gain and Level controls for both channels
• Master Density control
• Master Presence control
• Mic Eliminator XLR direct recording output

Call or click today to order.

Classic Randall hi-gain with MIDI programmability.

The Randall V2 Amp Head was developed for the guitarist who likes multiple tone-shaping options. The V2 amplifier head can produce almost any tone you can imagine, using a full tube preamp as well as a classic Randall solid-state preamp. Holding true to hi-gain roots, Randall pushed the boundaries of modern design that has resulted in this original take on hybrid guitar amplification.

A revolutionary new tube-driven MOSFET power section called "Valve-Dynamic" powers the V2 with so much reaction and feel that you would swear it was a full set of power tubes driving the amp. This 12AT7 driven power circuit not only has the feel, but also an accurate frequency response found only in a full tube power section.

Product Details
400W @ 4 Ohms, 280W @ 8 Ohms, 500W@2 Ohms
3-MIDI programmable channels:
Ch.3: All tube preamp with 3-12AX7 preamp tubes. Includes "Attack" switch for tight and loose feel, and "Bright" switch.
Ch. 2- Classic Randall S.S. channel with push/pull "Sustain Boost".
Ch. 1- Classic full clean with big headroom.
MIDI Assignable 6-band Graphic EQ with single On/Off switch. Can be activated for any/all channels then stored and recalled by the included 5-button MIDI foot controller.
Assignable "Series" or "Parallel" Effects loop with single On/Off switch. Can also be activated for any/all channels then stored and recalled by the included MIDI foot controller.
Master front "Volume" control
Master "Density" control. Adjusts the power amp low end dynamics.
Master "Presence" control. Adjusts the power amp extreme high end dynamics
MIDI in/thru
Mic Eliminator XLR direct recording output
World voltage AC inlet

Randall V2 Guitar Amp Head Features:

• 400W power @ 4 ohms
• Tube-driven MOSFET power section
• 3 MIDI-switching channels: all-tube preamp with 3-12AX7 preamp tubes, classic Randall S.S. channel, and full clean with big headroom and MIDI assignable 6-band graphic
• Included MIDI foot controller
• Programmable "Series" or "Parallel" Effects loop with single on/off switch
• Gain and Level controls for both channels
• Master Density control
• Master Presence control
• Mic Eliminator XLR direct recording output

With its incredible versatility, this may be the only amp you'll ever want. Order today with the assurance of our dual guarantees.

The Professional cabinet line seen on rock and metal stages all over the world. Constructed with rugged void-free birch plywood construction, these cabinets project a huge wall of sound with a focused tight low end. Complements the XL Series Amps perfectly.

Randall XL Series RS125XL 260W 2x12 and 1x15 Guitar Extension Cabinet Specifications:

• 320W RMS
• Straight front
• Black cloth grill
• 2 x Celestion Vintage 30's
• 1 x 15" Eminence Legend
• 3 4" void-free birch construction
• 88lbs
• 29.5"W x 14"D x 32"H
• 8 ohm mono input only

Get the right speaker cabinet for your MTS amp. Order today!

Traditional cabinet design, unmatched performance.

The Professional cabinet line seen on rock and metal stages all over the world. Constructed with rugged void-free birch plywood construction, these cabinets project a huge wall of sound with a focused tight low end. Complements the XL Series Amps perfectly.

Comes equipped with the Mic Eliminator XLR stereo/mono direct outs. Each direct out includes 3-way voicing switch and ground lift.

Voicing options: Normal, Dark or Bright.

Randall XL Series RS412XXL 260W 4x12 Guitar Extension Cabinet Specifications:

• 260W RMS
• Oversized cabinet
• Straight front
• Black cloth grill
• 4 x Celestion Vintage 30 speakers
• 3 4" void-free birch plywood construction
• 31.5"D x 14"D x 31.5"H
• 107lbs
• Mic Eliminator jack plate

Get the right speaker cabinet for your amp. Order today!

3 channels of hybrid versatility and huge power.

Designed and inspired by Arch Enemy lead guitarist Michael Amott and developed for the guitarist who likes multiple tone shaping options, the highly flexible V2 Ninja amp head can basically produce any tone you want using a full tube preamp as well as a classic Randall solid-state preamp. A Tube driven Mosfet power section called "Valve-Dynamic" powers the V2 Ninja with so much reaction and feel that you would swear it had a full set of power tubes driving the amp. This 12AT7 driven power circuit not only has the feel, but also an accurate frequency response found only in a full tube power section. The Randall V2 Ninja head offers a three channel head which includes a classic solid state clear channel, a classic Randall overdrive channel and an all-tube pre amp channel with "Attack" & "Bright". It also features a midi assignable 6-band graphic EQ and parallel effects loop, a master volume control, power amp density and presence controls and RUBY 12AX7AC5HG preamp tube.

Randall XL Series V2 Ninja V2NH 400W Hybrid Guitar Amp Head Features:

• 400W @ 4 Ohms, 280W @ 8 Ohms, 500W@2 Ohms
  
  3-MIDI programmable channels:
• Ch.3: All-tube preamp with 3-12AX7 preamp tubes. Includes "Attack" switch for tight and loose feel, and "Bright" switch.
• Ch. 2- Classic Randall S.S. channel with push/pull "Sustain Boost".
• Ch. 1- Classic full clean with big headroom.
  
  MIDI Assignable 6-band Graphic EQ with single On/Off switch. Can be activated for any/all channels then stored and recalled by the included 5-button MIDI foot controller.
• Assignable "Series" or "Parallel" Effects loop with single On/Off switch. Can also be activated for any/all channels then stored and recalled by the included MIDI foot controller.
• Master front "Volume" control
• Master "Density" control. Adjusts the power amp low end dynamics.
• Master "Presence" control. Adjusts the power amp extreme high end dynamics
• MIDI in/thru
• Mic Eliminator XLR direct recording output
• World voltage AC inlet

Take advantage of our dual guarantees and order today.

Traditional cabinet design, unmatched performance.

The Professional cabinet line seen on rock and metal stages all over the world. Constructed with rugged void-free birch plywood construction, these speaker cabinets project a huge wall of sound with a focused tight low end. Complements the XL Series Amps perfectly.

This Randall cabinet comes equipped with the Mic Eliminator and handle 280 watts RMS except as noted.

Randall XLT Series R412XLTX 280W 4x12 Guitar Extension Cabinet Specifications:

• 280W RMS
• Same as above
• Two Celestion Vintage 30's
• Two Celestion G12T-75's
• Mic Eliminator jack plate

Get the right speaker cabinet for your MTS amp. Order today!