Don't model—MODULE with the MTS system!

The Randall MTS Series RM50HP2 is both traditional and modern technology rolled into one amplifier head. First, you have 2 independent modular channels that can be loaded with your choice and combination of the available tube preamp modules. Load each channel with a preamp tone that fits only your needs with the ability to expand your arsenal anytime a new tone is needed. Don't purchase an amplifier because you like only it's clean or high-gain tone. Build this amp with your clean, your rhythm, and your high-gain tone for a complete custom set up. With more than a dozen tube preamps always available, chances are you'll have a hard time picking just two.

Change and bias your own power tubes! Enjoy the ease of replacing your power tubes anytime you like with the very user friendly power tube bias section found on each MTS amplifier. If a tube fails, no problem, the amp will kick that tube out of the circuit and a small LED will light by the tube that fails. Replace only the small protection fuse and tube using a small voltage meter and small screwdriver to adjust each individual bias point. If you like experimenting with different tube types, the bias section allows you to pop-in and bias a new set of tubes in just a few minutes.

MIDI channel switching and capability! Connect your RM50 to any MIDI capable external processing and program individual effects to each channel. With the MIDI in/thru jacks simply select your channel and external effect, using the included MIDI footswitch, press and hold the channel switch button on the head for two seconds, and hit the store button of the processor to save the preset. The included footswitch will then select both the RM50 channel and effect you want at the same time.

The RM50HP2 features a unique Palomino covering with tweed grille cloth and comes preloaded with two modules! Blackface and Plexi.

Blackface - Based on the preamp circuit of a Fender® Blackface Twin™. Legendary clean tone with cutting mid-range and sparking highs. The standard for a wide-range of cleans.

Plexi - Based on the preamp circuit of a classic Marshall® Plexi. Anywhere from Page, to Angus, to Gibbons. The amp that defined '70s rock and punk tone.

The most flexible all-tube series of amps, preamps, and combos ever created. The swappable MTS modular preamp components allow you to customize your set up for a sound that's all yours.

You choose the tone! With 14 modules to choose from and more in the works, having a new amp is as simple as plugging in a new module. Start with as few as one or as many as you like, and have all your favorite tones right at your fingertips. All modules can be used for the RM4 preamp, RM combos, and RM heads. All modules utilize the same panel layout, which includes Gain, Bass, Mid, Treble, and Master controls.

A bright switch is included directly under each Bass control. Each preamp module houses two 12AX7 tubes which can easily be changed or replaced. Use the thumbscrew to remove or secure each module to the front panel of every MTS amplifier.

Randall MTS Series RM50HP2 50W Guitar Amp Head with Modules Features:

• 2 modules Blackface, Plexi
• 50 watts 6L6 tube
• Tweed cloth front
• Master volume
• Master density & presence
• Accutronics spring reverb
• Tube buffered parallel effects loops with front panel mix control
• Series effects loop
• Slave output
• Rear panel bias test points
• Master volume input (for volume pedals)
• Footswitch included
• World voltage AC input selector (100/120/220/240)

Get the amp that can change with you! Order today.