The basic concept of the Thunder series was just to strip the handling to the bone but deliver convincing sounds. There you go, these handy little workhorses will do any gig.

All-tube guitar amp, fully loaded with all key features. Next to its sonic qualities, the beauty of this amp is rooted in simplicity. With its uncluttered, sensibly arrayed control features, the Thunder amplifiercomes complete with everything you need to dial in first-class sound. Handling couldn't be easier. With the Thunder amplifier, what you see is truly what you get-great looks, great sound. The latest in a line of classy amps, the Thunder delivers that unmistakable ENGL sound-warm, creamy and extremely dynamic tube tone. Quality components, excellent workmanship and strict quality control ensure this amp retains its value.

Engl Thunder 50W 1x12 Guitar Combo Amp with Reverb Specifications:

• Rated power: approx. 50 watts at 8 or 16 ohms
  
  Tubes
• V1 (input-tube): ECC 83/12AX7, FQ Grade
• V2, V3: ECC 83/12AX7 selected
• V4: ECC 83/12AX7 standard
• V7, V8: 5881 (6L6GC) matched set
  
  Fuses
• External: 1,25 AM (medium) at 230 volts; 2,5 AM (medium) in the 100 and 120 volt models
• Internal: 1,6 AT (slow) at 230 volts; 3,15 AT (slow) in the 100 and 120 volt models
  
  Dimensions: 53 x 45 x 25 cm
• Weight: 49 lbs. (22 kg)

Engl Thunder 50W 1x12 Guitar Combo Amp with Reverb Features:

• 50 watts
• Three channels
• Master volume

Save BIG when you buy today!

Rugged brown vinyl.

Fender 63 Tube Reverb Amp Cover Specifications:

• Amplifier dimensions: Height: 10 1/2" (26.7cm) Width: 18 7/8" (47.9 cm) Depth: 7 1/2" (19 cm)

Keep it factory fresh and under cover. Order now!

The ultimate club amp for blues, rock, or country.

The Fender '65 Deluxe Reverb Combo Amp is big enough to cut through the muddiest mix, but small enough to turn up and wail in small clubs. This makes it the perfect studio amp as well. You'd be surprised how many of your classic favorites were recorded with a Deluxe Reverb. Crank up this faithful reissue for your daily requirement of fat Fender tone. Delivers 22W through a 12" speaker. Features 2 channels (normal, vibrato), all-tube circuitry, tube vibrato, tube spring reverb, Blackface cosmetics, and 2-button footswitch.

Protect your investment with an optional genuine Fender cover. (See the accessory box on this page.)

Fender 65 Deluxe Reverb Combo Amp Specifications:

• 17-1/2"W x 24-1/2"H x 9-1/2"D
• 42 lbs.

Fender 65 Deluxe Reverb Combo Amp Features:

• 22W tube power
• 12" speaker
• 2 channels
• Spring reverb

Save BIG when you buy today!

Protect your amp.

You've got a classic amp in the '65 Deluxe. This durable, high-quality cover will fit it perfectly and give it the protection it deserves. Sturdy black vinyl.

Fender 65 Deluxe Reverb Cover Specifications:

• Dimensions: Height: 17-1/2" x Width: 24-1/2" x Depth: 9-1/2"

For this low price, why wait? Order today.

Revel in its classic tube tone and waves of vintage 'verb!

The Fender 65 Princeton Reverb Amp is an authentic all-tube reproduction of the original classic! The Princeton Reverb amplifier delivers 15W through one 10" Jensen Special Design speaker. This single-channel amplifier favorite has 2 inputs, reverb and vibrato effects with an included footswitch, and control knobs for Treble, Bass, Reverb, Speed, and Intensity. The tube complement consists of 3 - 12AX7s, a 12AT7, 2-Groove Tubes 6V6s, and 1 - 5AR4 rectifier tube. Covered with tough vinyl, the Fender 65 Princeton Reverb amp comes with a cover.

Fender 65 Princeton Reverb 15W 1x10 Tube Guitar Combo Amp Specifications:

• Weight: 34 lbs.
• Dimensions: 19-7/8"W x 16"H x 9-1/2"D

Fender 65 Princeton Reverb 15W 1x10 Tube Guitar Combo Amp Features:

• Amp Type: Vintage Reissue Series Tube Amp
• Output: 15 watts into 8 ohms
• Tubes: 3 x 12AX7, 1 x 12AT7, 2 x Groove Tubes 6V6, 1 x 5AR4 rectifier tube
• Speaker: 1-10 Jensen Special Design C-10R
• Channel: 1 channel (2 inputs)
• Controls: Volume, Treble, Bass, Reverb, Speed, Intensity
• Effects: Reverb, Vibrato
• Covering: Black textured vinyl

Fender 65 Princeton Reverb 15W 1x10 Tube Guitar Combo Amp Includes:

• Cover and footswitch

You don't have to wait any longer for genuine tube sound. Make your move today.

Relive the legend!

The Fender '65 Super Reverb Combo Amp is a long overdue addition to Fender's Vintage Reissue series. Here's a faithful re-creation of the legendary and highly collectible Blackface Super Reverb from the 1960s. This 45W, all-tube combo with 4 x 10" Jensen speakers, tube reverb, and vibrato has long been considered one of the best amps to "crank up" for unmiked club gigs or on the concert stage. The all-time bluesy, funky rocker! Includes 2-button footswitch.

Fender 65 Super Reverb Combo Amp Specifications:

• 25-1/4"W x 25"H x 10-1/2"D
• 65 lbs.

Fender 65 Super Reverb Combo Amp Features:

• All-tube 45W @ 2 ohms
• 4 x 10" Jenson speakers
• 2 footswitchable channels
• Reverb and vibrato

Order today and enjoy the quintessential Fender sound of this classic amp.

Crank up the 'verb and get swept away in the classic fat, clean sounds loved from the California beaches to the Grand Ol Opry.

The Fender '65 Twin Reverb Amp is an authentic all-tube reproduction of the original classic! One of the cleanest tube amps ever, or crank it hard for slight crunch. Delivers 85W through 2 - 12s. Has 2 channels, tube vibrato, tube spring reverb, tilt-back legs, and Blackface cosmetics. Includes 2-button footswitch. Order the optional Fender amp cover to protect your investment (see accessory box on this page).

Fender 65 Twin Reverb Amp Features:

• Original all-tube circuitry
• 85 watts
• 2 - 12" drivers
• 2 channels
• Tube vibrato
• Tube spring reverb
• 2-button footswitch
• Blackface cosmetics
• 26-1/2"W x 20"H x 10-1/2"D
• 64 lbs.

You don't have to wait any longer for genuine Twin tube sound. Make your move today.

Not a reissue, but a modern interpretation of a classic Fender.

Turn it up when you want to soar, or turn your guitar down to play clean with the super-responsive, all-tube Fender Custom Vibrolux Reverb-Amp Combo. The more dynamic your style, the more you'll love the Custom Vibrolux Reverb's ability to whisper or scream in reply to changes in your pick attack. Connoisseurs call this combo amplifier the Little Vibro-King!"

40W is loud enough for any club, and provides just the right punch in the studio, too. 2 - 10" Jensen alnico-magnet P10R speakers reproduce that fullness of tone for virtually any application. Clean, the Custom Vibrolux is punchy and full. With distortion, its punchy bass and horn-like midrange make this amp ideal for sustained and scorching solos.

Both channels (Normal, Bright) have access to the tube reverb and vibrato, which you can control with the included 2-button footswitch.

The Custom Vibrolux Revert-Amp Combo was designed in the Fender Amp Custom Shop and built on the regular tube amp line.

Fender Custom Vibrolux Reverb-Amp Combo Specifications:

• 25"W x 19-1/2"H x 8-1/2"D
• 46 lbs.

Fender Custom Vibrolux Reverb-Amp Combo Features:

• 40W tube power
• 2 - 6L6 Groove Tube output tubes
• 5 - 12AX7 preamp tubes
• One 12AT7 reverb/vibrato tube
• 2 x 10" Jensen P10R speakers with alnico magnets
• 2 independent channels (Normal and Bright)
• Reverb (both channels)
• Vibrato (both channels)
• External speaker jack (4 ohms)
• 2-button footswitch
• Tilt-back legs
• 25"W x 19-1/3"H x 8-1/2"D
• 46 lbs.

One of the world's most-collected vintage amps . . . with updated sound and specs. It's the heavenly, warm, overdriven tone you've been craving. Order today!

Fits Custom Vibrolux Reverb, 63 Vibroverb. Rugged vinyl.

Fender Vibrolux Reverb Combo Amp Cover Specifications:

• Amplifier dimensions: Height: 19.37" Width: 25" Depth: 8.62"

Keep it factory fresh and under cover. Order now!

Great flexibility and precision control with peerless all-tube tone in a portable package.

Full-bodied clean tones with warm presence are controlled by independent volume and 3-band EQ. Overdrive graduates smoothly from a slight raspy edge to full-throated screaming. The overdrive is controlled by gain, volume, and 3-band EQ. 2 master volumes, selectable by footswitch; master presence control; variable Accutronics reverb; and an effects loop with level control. Footswitchable boost button for the OD channel lets you really put the pedal to the metal. 50W of tube power come from 2 EL34s into a 12" Celestion speaker. Includes cover.

Hughes & Kettner Blem Duotone 50W 1x12 Tube Combo with Reverb Specifications:

• 26-1/2"W x 22"H x 10"D
• 59 lbs.

Hughes & Kettner Blem Duotone 50W 1x12 Tube Combo with Reverb Features:

• 50W all tube
• 12" Celestion speaker
• 3-band EQ and volume for each channel
• Gain control and footswitchable boost on OD channel
• 2 footswitch-selectable master volumes
• Effects loop with level control

You can mess around forever with modelers, emulators, and imitators, but if you want the real thing, you gotta get the real thing. It's worth it. Order today.

Middling output with major tonal versatility!

The Kustom Dual 30RC 2-Channel Combo features lead and rhythm channels (footswitchable with optional footswitch) with 2 high-gain preamp choices in the lead channel and one clean preamp selection in the rhythm channel. The 30W RMS power section energizes a 10" Celestion speaker whose output is shaped with a 3-band EQ section with a boost switch on the lead channel for searing solos. Analog chorus and reverb adds drama to your sound while a CD/tape input lets you hone your chops with prerecorded music.

Kustom Dual 30RC 30W 1x10" 2-Channel Guitar Combo with Chorus and Reverb Specifications:

• 15-1/4"W x 18-1/4"H x 9-3/4"D
• 27 lbs.

Kustom Dual 30RC 30W 1x10" 2-Channel Guitar Combo with Chorus and Reverb Features:

• 30W RMS power section
• 10" Celestion speaker
• Channels: lead and rhythm
• Preamp modes: 2 high gain, 1 clean
• 3-band EQ
• Boost switch on lead channel
• CD/tape input

Save BIG when you buy today!

The Marshall sound in a compact practice and studio amp.

The sturdy, compact Marshall MG15CDR 15 Watt Combo Amp with Reverb boasts 2 channels, a custom-voiced 8" speaker, and 15W of Marshallized power. Its clean channel will give you shimmering clean tones, and when cranked produces a musical crunch perfect for blues. The overdrive channel kicks in a bunch of the distortion that has made the Marshall name. 3-band EQ. Spring reverb. Emulated headphone output gives you great tone and mutes the speaker. Includes CD input.

Marshall MG15CDR 15 Watt Combo Amp with Reverb Specifications:

• 15"W x 14-3/4"H x 8"D
• 16 lbs.

Marshall MG15CDR 15 Watt Combo Amp with Reverb Features:

• 15W of power
• Custom-voiced 8" speaker
• 2 channels: clean and overdrive
• Contour control radically modifies the midrange, from traditional to scooped modern
• 3-band EQ
• Spring reverb
• CD input for jamming along purposes
• Emulated line out for recording
• Emulated headphone jack for silent practice
• Compact and sturdy design
• Classic Marshall looks

Order from Musician's Friend today and save.

The Marshall sound in a compact practice and studio amp.

The sturdy, compact Marshall MG15CDR 15 Watt Combo Amp with Reverb boasts 2 channels, a custom-voiced 8" speaker, and 15W of Marshallized power. Its clean channel will give you shimmering clean tones, and when cranked produces a musical crunch perfect for blues. The overdrive channel kicks in a bunch of the distortion that has made the Marshall name. 3-band EQ. Spring reverb. Emulated headphone output gives you great tone and mutes the speaker. Includes CD input.

Marshall MG15CDR 15 Watt Combo Amp with Reverb Refurb Specifications:

• 15"W x 14-3/4"H x 8"D
• 16 lbs.

Marshall MG15CDR 15 Watt Combo Amp with Reverb Refurb Features:

• 15W of power
• Custom-voiced 8" speaker
• 2 channels: clean and overdrive
• Contour control radically modifies the midrange, from traditional to scooped modern
• 3-band EQ
• Spring reverb
• CD input for jamming along purposes
• Emulated line out for recording
• Emulated headphone jack for silent practice
• Compact and sturdy design
• Classic Marshall looks

Order from us today and save.

One good voice and VoiceWorksPlus is like having first-call studio vocalists at the ready 24/7.

VoiceWorksPlus has all of the features you need to make your vocals shine brighter. It builds on the success of its predecessor, VoiceWorks, with an updated list of features including fourth generation TC-Helicon harmony technology, voice modeling, and the Transducer and iMod (micromod) blocks from VoicePro.

The quiet Burr Brown-based mic preamp, transparent pitch correction, TC Helicon reverb, delay, and dynamics algorithms from VoiceWorks round out its capabilities. Whether you're playing live gigs with a MIDI sequencer for backup or recording songs in your studio, VoiceWorksPlus offers high quality vocal processing options and advancess allowing you to realize the perfect vocal sound you're looking for.

4th Generation harmony
Many of the advancements are in the "humanization" of the harmony voices. TC Helicon added new parameters and broke out former group settings into individual voice settings:

- Each harmony voice now has unique portamento and pitch-smoothing values for better separation
- Unique humanization style and amount settings per voice allow quicker edits
- Added energy (volume) level randomization per voice to better mimic group dynamics
- Any voice can be designated as a doubling voice in all harmony modes
- Controlling harmonies with MIDI is easier and more realistic sounding than ever
- Automatic note extension keyed on lead voice duration for smoother notes mode response
- "Fussy" chord mode allows you to play runs and chords while controlling harmonies in chord mode
- Scale mode MIDI override offers quick-solution tonon-scale input notes without editing
- Increased portamento accuracy
- All new, more realistic harmony vibrato styles
- Improved voice allocation in notes mode increases pan and gender stability with wide-panned voices
- Harmony hold update allows MIDI performance of sustained phonemes
- Hold/Notes mode ADSR envelope with randomization creates synth-like performance from a vocal part

Create Characters using VoiceModeling
With VoiceModeling you can transform your live singing voice to make it deeper, breathier or even add a growl that would make you hoarse otherwise. The additional modeling blocks can be mixed and matched to lend your voice everything from the most subtle enhancements to the sound of hyperactive cartoon characters.

TC Helicon VoiceWorksPlus Vocal Harmony, Modeling and Effects Processor Specifications:

• Digital Inputs and Outputs
• Connectors: RCA phono (S/PDIF)
• Formats: S/PDIF (24 bit), EIAJ CP-340, IEC 958
• Sample rates: 44.1 kHz, 48 kHz
• Frequency response DIO: DC to 22/23.9 kHz ñ 0.01 dB @ 44.1/48 kHz
• Connectors, balanced: Mic.: XLR, line: 1/4" phone jack
  
  Impedance:
• Balanced/unbalanced Mic.: 3.6/1.8 kOhm, Line: 21/13 kOhm
• Line input level @ 0 dBFS: +24 dBu to +0 dBu
• Line sensitivity @ 12 dB headroom: -12 dBu to +12 dBu
• Mic. in high sens @ 0 dBFS: Pad off/on 24 dBu/-4 dBu to -61 dBu/-41 dBu
• Mic. in norm sens @ 0 dBFS: Pad off/on -14 dBu/6 dBu to -51 dBu/-31 dBu
• Mic. in low sens @ 0 dBFS: Pad off/on -2 dBu/18 dBu to -39 dBu/-19dBu
• Line, mic. @ min gain, dynamic range: > +92 dB, 20 Hz - 20 kHz
  
  NF/Vi @ max. micamp. gain,
• Rg = 200 ohm: < +2 dB / -127.4 dBu
• THD: < -100 dB (0,001 %) @ 1 kHz
• Line frequency response: +0/-0.1 dB, 20 Hz to 20 kHz
• Mic. frequency response, max gain: -1.5 dB @ 40 Hz, +0/-0.1 dB (200 Hz to 20 kHz)
• Crosstalk: < -85 dB, 20 Hz to 20 kHz
• A to D conversion: 24 bit, 128 x oversampling bitstream
• A to D delay: 0.65/0.70 ms @ S.R. = 48/44.1 kHz
• D to A conversion: 24 bit, 128 x oversampling bitstream
• D to A delay: 0.63/0.68 ms @ S.R. = 48/44.1 kHz
• Connectors, balanced: 1/4" TRS phone jack
• Output impedance: 40 ohm
• Balanced/unbalanced 20 dBu/14 dBu, R-load = 1200 ohm
• Output range: variable up to +20 dBu
• Dynamic range: > +104 dB, 20 Hz to 20 kHz
• THD: <-98 dB (0.0013 %) @ 1 kHz
• Frequency response: 20 Hz to 20 kHz, +0/-0.3 dB
• Crosstalk: <-100 dB, 20 Hz to 20 kHz
• Complies with: IEN 55103-1 and EN 55103-2
• FCC part 15, Class B, CISPR 22, Class B
  
  Safety
• Certified to: IEC 65, EN 60065, UL6500 and CSA
• E60065
• CSA FILE #LR108093
  
  Environment
• Operating temperature: 32° F to 122° F (0° C to 50° C)
• Storage temperature: -22ø F to 167ø F (-30° C to 70° C)
• Humidity: Max. 90% non-condensing
  
  Control Interface
• MIDI: In/out/thru: 5 pin DIN
• Pedal: 1/4" phone jack
  
  Supplementary
• Display: 16x 2 character LCD display
• Dimensions: 19" x 1.75" x 8.2" (483 x 44 x 195 mm)
• Weight: 4.1 lbs (1.85 kg)
• Mains voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select)
• Power consumption: <15 W
• Warranty parts and labor 1 year

TC Helicon VoiceWorksPlus Vocal Harmony, Modeling and Effects Processor Features:

• Interchangeable voice modeling or harmony
• Advanced harmony humanization and control
• Individually-adjustable harmony voice gender
• Megaphone effects with high Q band limiting
• Distortion
• Chorus
• Micro-tuning
• Flange with pitch feedback
• Pitch correction
• Reverb
• Delay with tap tempo
• Compressor
• De-Ess
• 3 band EQ
• Gate
• Footswitch or volume pedal control
• Burr Brown mic preamp with phantom power for condenser mics
• Stereo or mono output
  
  VoiceWorksPlus Modeling Blocks:
• Inflection
• Pitch shift
• Vibrato
• Resonance and spectral
• Breath and growl
  
  Applications
• Engage voice modeling to instantly transform your voice so you can emulate popular singers or create special characters
• Create a virtual harmony backup group from only your voice to increase the impact of your live bands and recordings
• Use modern-sounding distortion and megaphone effects in your songs
• Layer the various blocks to create wild, attention-getting vocal special FX
• Add overall polish to your vocals with compression and tasty EQ processing
• Fine tune the pitch of your performance with scale-based pitch correction

All of the tools you need to create world-class vocal tracks and more are here.

Teeny-tiny footprint; great big sound.

The Traynor TRM40 Reverb Mate 40 Combo Amp splits 2x20W of power evenly through 2 - 8" speakers, delivering more great tone at higher volumes than single-speaker 40W combos. Also has a 4-band EQ, gain control, dual channels, spring reverb, chorus, and headphone jack. Traynor backs the TRM40 Reverb Mate 40 with a 2-year warranty.

Traynor TRM40 Reverb Mate 40 Combo Amp Specifications:

• 20-1/2"W x 14-1/2"H x 8-1/2"D
• 24 lbs.

Traynor TRM40 Reverb Mate 40 Combo Amp Features:

• 2x20W
• 2 - 8" speakers
• 4-band EQ
• 2 channels
• Spring reverb
• Chorus
• Line out
• Headphone jack

Why haul around that shoulder-straining stack? Order the TRM40 today and get reliable, easy-to-move sound.