Now you can get the Gallien-Krueger MB2-500 Ultra Light Bass Amp Head and the Neo410 Bass Speaker Cabinet all in one rocking kit.

The MB2-500
This ultra-light, under-4-pound bass amplifier head is fully equipped with professional features: master and gain, padded input, contour, 4-band active EQ, footswitchable boost, tuning mute, effects loop, isolated DI, Speakon combo outputs, headphone/line out, and 500W of power into 4-ohm loads.

The Neo410
The Gallien-Krueger Neo410 bass speaker cabinet offers you high-powered performance without breaking your back during transport. Part of GK's Neo Series speaker cabinets, at the Neo410 cab's core are 4 10" GK Paragon cast-frame neodymium loudspeakers. The speakers maintain high power output while producing silky-smooth natural tone with consistent response from top to bottom. They've also been designed with reduced weight for your gigging convenience. Removable casters help you move the cab easily.

The Neo410 speaker cab provides plenty of definition in the highs and mids with an abundance of fat, punchy low end. This bass cab may be used in standard full-range operation or with GK's innovative Horn Bi-Amp System. Special chambering and bracing have been incorporated in the cabinet design to eliminate standing waves so that nothing gets in the way of your performance. Other features include a high-quality horn, black Tolex covering, recessed spring-loaded handles, rugged steel grille, custom interlocking corners, and 11-ply poplar construction.

SP1000 Speakon Speaker Cable
This kit also includes a Monster Studio Pro 1000 Speaker Cable. It achieves Monster's ultimate performance standard for both studio and live applications. Uses 3 Time Correct multi-gauge wire networks for extreme accuracy in imaging. It's ultra quiet and backed by Monster's lifetime guarantee.

Gallien-Krueger MB2 Ultra Light Bass Amp Head and NEO410 Cab Stack Features:

• MB2-500:
• 500W at 4 ohms, 350W at 8 ohms
• 10dB pad
• Tuning Mute
• Input Gain, Master
• Contour
• 4-band active EQ
• Footswitchable boost with independent volume
• Effects Loop & Tuner out
• Transformer Isolated DI out with Pre/Post Switch and Ground Lift
• Dual Speakon Combo Outputs
• Headphone/Line Out
• Footswitch Input
• Dimensions: 11" W x 1-3/4" H x 7-3/4" D
• Weight: Less than 4lb.
  
  Neo410 Speaker Cabinet
• GK Paragon cast-frame neodymium loudspeakers
• Special chambering and bracing
• High-quality horn
• Black Tolex covering Recessed spring-loaded handles
• Rugged steel grille
• Custom interlocking corners
• 11-ply poplar construction
• Removable castors
• Impedance: 8 ohms
• Power Rating: 800 Watts
• Speakers: 4x10" plus horn
• Frequency response: 45 Hz to 19 kHz
• Usable Low Frequency: 31 Hz
• Sensitivity: 98 dB
• Connectors: 1/4" & Speakon
• Porting: Front-ported
• Dimensions: 23-1/2" W x 26-1/2" H x 18-1/2"D
• Weight: 78lb.
  
  SP1000 Speaker Cable (3 ft.)
• Precision Time Correct windings with separate wire networks provide excellent soundstage performance
• Heavy-gauge Bass Control Conductor for improved low frequency punch and dynamics
• Magnetic Flux Tube improves bass response and natural sonic characteristics
• Extra-flexible Duraflex outer jacket for superior reliability and cut resistance

Take your earth-shaking sound everywhere you go—order this GK kit now.

Now get the Rev Jr. Pro 20W head and Rev Jr. 1x12 together in one rocking half-stack.

The Rev Jr. Pro
The Krank Rev Jr. Pro is a small-yet-powerful 20W tube guitar amplifier head. Expanding on the original Rev Jr, the 2-channel Pro version is footswitchable and has the added features of treble and bass controls on the "Kleen" channel. The Krank Rev Jr. Pro amp's circuit is very similar to the 120W Rev + in design and offers you the same raging high-gain sounds at a lower wattage than its big brother delivers.

The Rev Jr 1x12" Cab
The Krank Rev Jr 1x12" extension cabinet was designed to work with the Krank Rev Jr. Standard or the Krank Rev Jr. Pro 2-channel 20 watt heads. This cabinet sounds great whether you are playing clean or getting down and dirty with the raging high gain tones that the Rev Jr. amps put out. This tough closed back cabinet can handle it all with the on-board premium 12" speaker.

Krank Krank Rev Jr. Pro Half Stack Black/Black Specifications:

• Rev Jr. Pro Head:
• 2-channel, footswitchable 20W head
• Preamp: 3 12AX7 tubes, power section two Sovtek 5881 tubes
• Krank channel: sweep control, 3 band EQ, gain, master
• Kleen channel: volume, 2 band EQ
• Active effects loop, 8 and 16 ohm selector, worldwide voltage use, footswitch included

Krank Krank Rev Jr. Pro Half Stack Black/Black Features:

• Rev Jr. Pro Head:
• 3-band EQ
• Parametric mid-sweep
• Gain
• Separate volumes for Krank and Kleen channel
• "Boost" button for more drive
• Active effects loop
• Ohm selector and voltage selector for worldwide use
  
  Rev Jr. 1x12 Cabinet:
• 1x12" premium speaker
• Closed back design
• Metal grill
• Heavy-duty handle

Add this half stack to your arsenal and Krank it up—order today.

Now get the Rev Jr. Pro 20W head and Rev Jr 1x12 together in one rocking half-stack.

The Rev Jr. Pro
The Krank Rev Jr. Pro is a small-yet-powerful 20W tube guitar amplifier head. Expanding on the original Rev Jr, the 2-channel Pro version is footswitchable and has the added features of treble and bass controls on the "Kleen" channel. The Krank Rev Jr. Pro amp's circuit is very similar to the 120W Rev + in design and offers you the same raging high-gain sounds at a lower wattage than its big brother delivers.

The Rev Jr. 1x12" Cab
The Krank Rev Jr. 1x12" extension cabinet was designed to work with the Krank Rev Jr. Standard or the Krank Rev Jr. Pro 2-channel 20 watt heads. This cabinet sounds great whether you are playing clean or getting down and dirty with the raging high gain tones that the Rev Jr. amps put out. This tough closed back cabinet can handle it all with the on-board premium 12" speaker.

Krank Krank Rev Jr. Pro Half Stack Black/Chrome Specifications:

• Rev Jr. Pro Head:
• 2-channel, footswitchable 20W head
• Preamp: 3 12AX7 tubes, power section two Sovtek 5881 tubes
• Krank channel: sweep control, 3 band EQ, gain, master
• Kleen channel: volume, 2 band EQ
• Active effects loop, 8 and 16 ohm selector, worldwide voltage use, footswitch included

Krank Krank Rev Jr. Pro Half Stack Black/Chrome Features:

• Rev Jr. Pro Head:
• 3-band EQ
• Parametric mid-sweep
• Gain
• Separate volumes for Krank and Kleen channel
• "Boost" button for more drive
• Active effects loop
• Ohm selector and voltage selector for worldwide use
  
  Rev Jr. 1x12 Cabinet:
• 1x12" premium speaker
• Closed back design
• Metal grill
• Heavy duty handle

Put the power of the Rev Pro half stack to work for you—call or click today.

Now get the Rev Jr. Standard 20W head and Rev Jr 1x12 together in one rocking half-stack.

The Rev Jr. Standard
The Rev Jr. Standard amp head boasts an all tube dual channel head (two 5881s, three 12AX7s) with boost switch and a tube-driven active effects loop that gives even the most discerning tube amp enthusiasts an array of tones ranging from clean to high gain.

Krank Amplifiers have been a driving force in the popularization of lower wattage micro stacks with the introduction of the Rev Jr., the 20W version of the monster Rev Series 1 head and cabs and the first in the line of the Jr. Series of small amps.

The Rev Jr. 1x12" Cab The Krank Rev Jr. 1x12" extension cabinet was designed to work with the Krank Rev Jr. Standard or the Krank Rev Jr. Pro 2-channel 20 watt heads. This cabinet sounds great whether you are playing clean or getting down and dirty with the raging high gain tones that the Rev Jr. amps put out. This tough closed back cabinet can handle it all with the on-board premium 12" speaker.

Krank Krank Rev Jr. Standard Half Stack Black/Black Features:

• Rev Jr. Standard head:
• 2-channel 20W head
• Preamp: 3 12AX7 tubes
• Power section: 1 Sovtek 5881 tubes
• Volume, gain, 3-band EQ, sweep control, push button "boost," push-button channel switch
• Tube-driven active effects loop
• 8 and 16 ohm selector
• Worldwide voltage use
  
  Rev Jr. 1x12 Cabinet:
• 1x12" premium speaker
• Closed back design
• Metal grill
• Heavy duty handle

Put the Rev Jr. Standard half stack to work for you—call or click today.

Now get the Rev Jr. Standard 20W head and Rev Jr 1x12 together in one rocking half-stack.

The Rev Jr. Standard
The Rev Jr. Standard amp head boasts an all tube dual channel head (two 5881s, three 12AX7s) with boost switch and a tube-driven active effects loop that gives even the most discerning tube amp enthusiasts an array of tones ranging from clean to high gain.

Krank Amplifiers have been a driving force in the popularization of lower wattage micro stacks with the introduction of the Rev Jr., the 20W version of the monster Rev Series 1 head and cabs and the first in the line of the Jr. Series of small amps.

The Rev Jr. 1x12" Cab The Krank Rev Jr. 1x12" extension cabinet was designed to work with the Krank Rev Jr. Standard or the Krank Rev Jr. Pro 2-channel 20 watt heads. This cabinet sounds great whether you are playing clean or getting down and dirty with the raging high gain tones that the Rev Jr. amps put out. This tough closed back cabinet can handle it all with the on-board premium 12" speaker.

Krank Krank Rev Jr. Standard Half Stack Black/Chrome Features:

• Rev Jr. Standard head:
• 2-channel 20W head
• Preamp: 3 12AX7 tubes
• Power section: 1 Sovtek 5881 tubes
• Volume, gain, 3-band EQ, sweep control, push button "boost," push-button channel switch
• Tube-driven active effects loop
• 8 and 16 ohm selector
• Worldwide voltage use
  
  Rev Jr 1x12 Cabinet:
• 1x12" premium speaker
• Closed back design
• Metal grill
• Heavy duty handle

Put the Rev Jr. Standard half stack to work for you—call or click today.

Now get the Rev Jr. Pro 20W head and 2 Rev Jr 1x12 cabinets together for an earthshaking full stack.

The Rev Jr. Pro The Krank Rev Jr. Pro is a small-yet-powerful 20W tube guitar amplifier head. Expanding on the original Rev Jr, the 2-channel Pro version is footswitchable and has the added features of treble and bass controls on the "Kleen" channel. The Krank Rev Jr. Pro amp's circuit is very similar to the 120W Rev + in design and offers you the same raging high-gain sounds at a lower wattage than its big brother delivers.

The Rev Jr 1x12" Cabs These Krank Rev Jr 1x12" extension cabinets were designed to work with the Krank Rev Jr. Standard or the Krank Rev Jr. Pro 2-channel 20-watt heads. These cabinets sound great whether you are playing clean or getting down and dirty with the raging high gain tones that the Rev Jr. amps put out. These tough, closed-back cabinets can handle it all with their onboard premium 12" speakers.

Krank Rev Jr. Pro Full Stack Black/Black Specifications:

• Rev Jr. Pro Head:
• 2-channel, footswitchable 20W head
• Preamp: 3 12AX7 tubes, power section two Sovtek 5881 tubes
• Krank channel: sweep control, 3 band EQ, gain, master
• Kleen channel: volume, 2 band EQ
• Active effects loop, 8 and 16 ohm selector, worldwide voltage use, footswitch included

Krank Rev Jr. Pro Full Stack Black/Black Features:

• Rev Jr. Pro Head:
• 3-band EQ
• Parametric mid-sweep
• Gain
• Separate volumes for Krank and Kleen channel
• "Boost" button for more drive
• Active effects loop
• Ohm selector and voltage selector for worldwide use
  
  Rev Jr 1x12 Cabinet (2):
• 1x12" premium speaker
• Closed back design
• Metal grill
• Heavy duty handle

Put the Rev Jr. Pro full stack's power to work for you—order now.

Now get the Rev Jr. Pro 20W head and 2 Rev Jr. 1x12 cabinets together for an earthshaking full stack.

The Rev Jr. Pro The Krank Rev Jr. Pro is a small-yet-powerful 20W tube guitar amplifier head. Expanding on the original Rev Jr, the 2-channel Pro version is footswitchable and has the added features of treble and bass controls on the "Kleen" channel. The Krank Rev Jr. Pro amp's circuit is very similar to the 120W Rev + in design and offers you the same raging high-gain sounds at a lower wattage than its big brother delivers.

The Rev Jr. 1x12" Cabs These Krank Rev Jr. 1x12" extension cabinets were designed to work with the Krank Rev Jr. Standard or the Krank Rev Jr. Pro 2-channel 20-watt heads. These cabinets sound great whether you are playing clean or getting down and dirty with the raging high gain tones that the Rev Jr. amps put out. These tough, closed-back cabinets can handle it all with their onboard premium 12" speakers.

Krank Rev Jr. Pro Full Stack Black/Chrome Specifications:

• Rev Jr. Pro Head:
• 2-channel, footswitchable 20W head
• Preamp: 3 12AX7 tubes, power section two Sovtek 5881 tubes
• Krank channel: sweep control, 3 band EQ, gain, master
• Kleen channel: volume, 2 band EQ
• Active effects loop, 8 and 16 ohm selector, worldwide voltage use, footswitch included

Krank Rev Jr. Pro Full Stack Black/Chrome Features:

• Rev Jr. Pro Head:
• 3-band EQ
• Parametric mid-sweep
• Gain
• Separate volumes for Krank and Kleen channel
• "Boost" button for more drive
• Active effects loop
• Ohm selector and voltage selector for worldwide use
  
  Rev Jr 1x12 Cabinet (2):
• 1x12" premium speaker
• Closed back design
• Metal grill
• Heavy duty handle

Put the Rev Jr. Pro full stack's power to work for you—order now.

Now get the Rev Jr. Standard 20W head and 2 Rev Jr 1x12" cabinets together for an earthshaking full stack.

The Rev Jr. Standard
The Rev Jr. Standard amp head boasts an all tube dual channel head (two 5881s, three 12AX7s) with boost switch and a tube-driven active effects loop that gives even the most discerning tube amp enthusiasts an array of tones ranging from clean to high gain.

Krank Amplifiers have been a driving force in the popularization of lower wattage micro stacks with the introduction of the Rev Jr., the 20W version of the monster Rev Series 1 head and cabs and the first in the line of the Jr. Series of small amps.

The Rev Jr. 1x12" Cabs These Krank Rev Jr. 1x12" extension cabinets were designed to work with the Krank Rev Jr. Standard or the Krank Rev Jr. Pro 2-channel 20-watt heads. These cabinets sound great whether you are playing clean or getting down and dirty with the raging high gain tones that the Rev Jr. amps put out. These tough, closed-back cabinets can handle it all with their onboard premium 12" speakers.

Krank Rev Jr. Standard Full Stack Black/Black Features:

• Rev Jr. Standard head:
• 2-channel 20W head
• Preamp: 3 12AX7 tubes
• Power section: 1 Sovtek 5881 tubes
• Volume, gain, 3-band EQ, sweep control, push button "boost," push-button channel switch
• Tube-driven active effects loop
• 8 and 16 ohm selector
• Worldwide voltage use
  
  Rev Jr. 1x12 Cabinet (2):
• 1x12" premium speaker
• Closed back design
• Metal grill
• Heavy duty handle

Add the Rev Jr. Pro's 20W and double 1x12s to your arsenal—call or click today.

Now get the Rev Jr. Standard 20W head and 2 Rev Jr. 1x12" cabinets together for an earthshaking full stack.

The Rev Jr. Standard
The Rev Jr. Standard amp head boasts an all tube dual channel head (two 5881s, three 12AX7s) with boost switch and a tube-driven active effects loop that gives even the most discerning tube amp enthusiasts an array of tones ranging from clean to high gain.

Krank Amplifiers have been a driving force in the popularization of lower wattage micro stacks with the introduction of the Rev Jr., the 20W version of the monster Rev Series 1 head and cabs and the first in the line of the Jr. Series of small amps.

The Rev Jr. 1x12" Cabs These Krank Rev Jr. 1x12" extension cabinets were designed to work with the Krank Rev Jr. Standard or the Krank Rev Jr. Pro 2-channel 20-watt heads. These cabinets sound great whether you are playing clean or getting down and dirty with the raging high gain tones that the Rev Jr. amps put out. These tough, closed-back cabinets can handle it all with their onboard premium 12" speakers.

Krank Rev Jr. Standard Full Stack Black/Chrome Features:

• Rev Jr. Standard head:
• 2-channel 20W head
• Preamp: 3 12AX7 tubes
• Power section: 1 Sovtek 5881 tubes
• Volume, gain, 3-band EQ, sweep control, push button "boost," push-button channel switch
• Tube-driven active effects loop
• 8 and 16 ohm selector
• Worldwide voltage use
  
  Rev Jr. 1x12 Cabinet (2):
• 1x12" premium speaker
• Closed back design
• Metal grill
• Heavy duty handle

Add the Rev Jr. Pro's 20W and double 1x12s to your arsenal—call or click today.

The Kustom QUAD JR. Half Stack features lead and rhythm channels (footswitchable with optional footswitch) with 2 high-gain preamp choices in the lead channel and 2 clean preamp selections in the rhythm channel. The 100W amp pumps your sound through 4 - 12" Celestions and is fully tweakable with dual 3-band EQ and a complement of 8 - 24-bit digital effects. The lead channel offers a boost switch. Tonally, its circuit has been modified to provide increased gain and tight low-end response. The result is a half-stack that excels at heavy music but still has the versatility to deliver warm, clean sounds and crunchy, medium-gain tones.

Kustom QUAD JR. 100W Half Stack Guitar Amplifier Specifications:

• Dimensions: 28" x 11-1/4" x 11-1/4"
• Weight: 25.8 lbs.

Kustom QUAD JR. 100W Half Stack Guitar Amplifier Features:

• 100W
• 4 - 12" Celestion speakers
• Channels: lead and rhythm
• Lead preamp: 2 high gain (grind/punch)
• Rhythm preamp: 2 clean (fat/punch)
• Dual 3-band EQ
• Lead boost
• 8 - 24-bit digital effects

An intense rock amplifier! Order today.

This Line 6 full stack includes the Spider Valve HD100 100W Guitar Amp Head and 2 Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinets, one slanted, one straight.

Spider Valve HD100 100W Guitar Amp Head
The Spider Valve amp head delivers 12 channels of amp modeling - combined with several flavors of built-in modulation, delay and reverb driven by an all tube, all Bogner amplification design boasting 6L6 power tubes, 12AX7 preamp tubes and premium Celestion® Vintage 30 speakers.

Spider Valve™ is the result of a groundbreaking collaboration between Line 6 and Reinhold Bogner fusing the versatility of modeling with the performance and feel of a world-class tube amplifier.

Just as Line 6 revolutionized the world of guitar amps through pioneering modeling technology, Spider Valve shatters the boundaries of tube amp performance by applying that same tonal range to Bogner's all-tube amp design, boutique component selection and stellar voicing.

Combining the performance, response and feel of a well crafted tube amp with the inspiring capabilities of amp and effect modeling - the Spider Valve amplifier delivers the best of both worlds.

Modeling + Tubes
The Spider Valve design combines 12AX7 preamp tubes with Line 6's signature modeling front-end, a marriage that allows each part of the sonic equation to deliver what it does best: creamy, cascading distortion and enriched harmonics from the tubes, and 12 of the world's finest amp models and seven stunning effects from the modeling front end. And, of course, perfectly matched 6L6 power tubes driving Celestion® Vintage 30 speakers to deliver unprecedented sonic impact and spatial imaging.

With the simple front-end controls and display, programmable patches and presets are instantly within reach. Tweak your tone even further with the front panel Presence, Drive, Bass, Mid and Treble controls: this is a true-blue tube amp, and it acts like one, responding and delivering all the analog detail, performance and warmth of every amp model and effect.

Unleash your effects arsenal.
From the DL4™ stompbox to the Echo Farm™ plug-in, Line 6 effects have achieved cult status in top studios and stage rigs of discerning guitarists. With Spider Valve, Line 6 delivers a palette of top grade integrated effects - easily accessed and tweaked from the front panel using the SmartControl FX knobs.

Modulation
A choice of phaser, chorus or tremolo lets you tweak your tone from rich luscious modulations to dramatic orbital gyrations.

Delay
From the swirling feedback of the sweep echo to the organic decay of the tape echo, Spider Valve delays provide an unmatched level of dimension and depth.

Reverb
The Spider Valve effects arsenal is complete with a dedicated reverb control allowing you to dial in anything from subtle ambiences to cavernous spaces.

The Bogner Story
Reinhold Bogner, the principal designer at Bogner Amplification, had been designing and building amplifiers long before leaving Germany in 1989. Moving to Los Angeles he quickly gained the trust of many influential players including Steve Stevens, Dan Huff, Allan Holdsworth, Mike Landau and Steve Vai who sought out his skill at modifying and custom building their amps.

But it was overhauling and revitalizing Eddie Van Halen's legendary 1968 Marshall® Plexi in 1992 that propelled Bogner to legendary status and inspired him to launch his own high-end amp company, Bogner Amplification. Acclaimed for their rich, robust tones, channel-switching sophistication and sonic versatility - Bogner amps have earned a maniacally devoted following among discerning guitarists such as Jerry Cantrell, Lyle Workman, Wes Borland, Chris DeGarmo, Keith Urban, Richie Sambora and many others.

Using only premium components - in tandem with a level of craftsmanship that can only be referred to as "artistry"- Bogner amplifiers more than deserve their exalted reputation. Ever the restless creator, Bogner brought those same priorities, standards and sensibilities to bear on the Spider Valve design. Each Spider Valve amp-the 112, 212 and HD100- combines the talent and experience of Bogner, arguably the tube world's leading light, with the know-how and technological savvy of the world's leader in modeling, Line 6.

All Line 6 products come with 24-7 customer support services. Use the automated help request system, access discussion forums, and download software updates and user manuals, plus a lot more.

* All product names used in this webpage are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Line 6's sound model development.

Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinets
The Spider Valve 412VS speaker cabs from Line 6 features Premium Celestion® Vintage 30 speakers for superior tone of the highest-definition. Amp modeling and digital effects in a classic tube full stack. These closed-back cabs really let you open up your Line 6 head - and the Spider Valve's rugged construction and upgraded finish will look great behind you onstage at the club, the hall, or the stadium!

Line 6 HD100 and 412VS Full Stack Features:

• Spider Valve HD100 100W Guitar Amp Head
  
• 100W Class AB tube amp through (2) 12AX7 preamp tubes and (4) 6L6 power tubes
• 12 dialed in amp models (channel voices) that deliver a complete tonal range from shimmering clean to insane grind
• 7 Smart Control FX (up to 3 simultaneous) including Tape Echo, Sweep Echo, Standard Delay (all with Tap Tempo) Chorus/Flanger, Phaser, Tremolo, and Reverb
• Built-in front panel tuner
• 36 user programmable channels
• 300+ artist created presets covering the greatest guitar tones of all time
• POD® XLR direct out for studio direct tone
• Compatible with FBV2, FBV Express and FBV Shortboard foot controllers
• Single and dual 1/4" speaker output jacks for connection to auxiliary cabinets (4, 8 or 16 ohms)
• 1/4" power amp input jack for POD® amp and effect modelers
  
  Weight: 35 lbs
• Dimensions: 29" L x 14" H x 13" D
  
  Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinets
  
• Celestion® Vintage 30 4x12
  
  Weight: 83 lbs.
• Dimensions: 29" L x 30" H x 15" D

Order today with the protection of our 45-day lowest price and total satisfaction guarantees!

This Line 6 half stack includes the Spider Valve HD100 100W Guitar Amp Head and a slant Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinet.

Spider Valve HD100 100W Guitar Amp Head
The Spider Valve amp head delivers 12 channels of amp modeling - combined with several flavors of built-in modulation, delay and reverb driven by an all tube, all Bogner amplification design boasting 6L6 power tubes, 12AX7 preamp tubes and premium Celestion® Vintage 30 speakers.

Spider Valve™ is the result of a groundbreaking collaboration between Line 6 and Reinhold Bogner fusing the versatility of modeling with the performance and feel of a world-class tube amplifier.

Just as Line 6 revolutionized the world of amps through pioneering modeling technology, Spider Valve shatters the boundaries of tube amp performance by applying that same tonal range to Bogner's all-tube amp design, boutique component selection and stellar voicing.

Combining the performance, response and feel of a well crafted tube amp with the inspiring capabilities of amp and effect modeling - the Spider Valve amplifier delivers the best of both worlds.

Modeling + Tubes
The Spider Valve design combines 12AX7 preamp tubes with Line 6's signature modeling front-end, a marriage that allows each part of the sonic equation to deliver what it does best: creamy, cascading distortion and enriched harmonics from the tubes, and 12 of the world's finest amp models and seven stunning effects from the modeling front end. And, of course, perfectly matched 6L6 power tubes driving Celestion® Vintage 30 speakers to deliver unprecedented sonic impact and spatial imaging.

With the simple front-end controls and display, programmable patches and presets are instantly within reach. Tweak your tone even further with the front panel Presence, Drive, Bass, Mid and Treble controls: this is a true-blue tube amp, and it acts like one, responding and delivering all the analog detail, performance and warmth of every amp model and effect.

Unleash your effects arsenal.
From the DL4™ stompbox to the Echo Farm™ plug-in, Line 6 effects have achieved cult status in top studios and stage rigs of discerning guitarists. With Spider Valve, Line 6 delivers a palette of top grade integrated effects - easily accessed and tweaked from the front panel using the SmartControl FX knobs.

Modulation
A choice of phaser, chorus or tremolo lets you tweak your tone from rich luscious modulations to dramatic orbital gyrations.

Delay
From the swirling feedback of the sweep echo to the organic decay of the tape echo, Spider Valve delays provide an unmatched level of dimension and depth.

Reverb
The Spider Valve effects arsenal is complete with a dedicated reverb control allowing you to dial in anything from subtle ambiences to cavernous spaces.

The Bogner Story
Reinhold Bogner, the principal designer at Bogner Amplification, had been designing and building amplifiers long before leaving Germany in 1989. Moving to Los Angeles he quickly gained the trust of many influential players including Steve Stevens, Dan Huff, Allan Holdsworth, Mike Landau and Steve Vai who sought out his skill at modifying and custom building their amps.

But it was overhauling and revitalizing Eddie Van Halen's legendary 1968 Marshall® Plexi in 1992 that propelled Bogner to legendary status and inspired him to launch his own high-end amp company, Bogner Amplification. Acclaimed for their rich, robust tones, channel-switching sophistication and sonic versatility - Bogner amps have earned a maniacally devoted following among discerning guitarists such as Jerry Cantrell, Lyle Workman, Wes Borland, Chris DeGarmo, Keith Urban, Richie Sambora and many others.

Using only premium components - in tandem with a level of craftsmanship that can only be referred to as "artistry"- Bogner amplifiers more than deserve their exalted reputation. Ever the restless creator, Bogner brought those same priorities, standards and sensibilities to bear on the Spider Valve design. Each Spider Valve amp-the 112, 212 and HD100- combines the talent and experience of Bogner, arguably the tube world's leading light, with the know-how and technological savvy of the world's leader in modeling, Line 6.

All Line 6 products come with 24-7 customer support services. Use the automated help request system, access discussion forums, and download software updates and user manuals, plus a lot more.

* All product names used in this webpage are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Line 6's sound model development.

Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinet
The Spider Valve 412VS speaker cab from Line 6 features Premium Celestion® Vintage 30 speakers for superior tone of the highest-definition. This closed-back cab really lets you open up your Line 6 head - and the Spider Valve's rugged construction and upgraded finish will look great behind you onstage at the club, the hall, or the stadium!

Line 6 HD100 and 412VS Half Stack Features:

• Spider Valve HD100 100W Guitar Amp Head
  
• 100W Class AB tube amp through (2) 12AX7 preamp tubes and (4) 6L6 power tubes
• 12 dialed in amp models (channel voices) that deliver a complete tonal range from shimmering clean to insane grind
• 7 Smart Control FX (up to 3 simultaneous) including Tape Echo, Sweep Echo, Standard Delay (all with Tap Tempo) Chorus/Flanger, Phaser, Tremolo, and Reverb
• Built-in front panel tuner
• 36 user programmable channels
• 300+ artist created presets covering the greatest guitar tones of all time
• POD® XLR direct out for studio direct tone
• Compatible with FBV2, FBV Express and FBV Shortboard foot controllers
• Single and dual 1/4" speaker output jacks for connection to auxiliary cabinets (4, 8 or 16 ohms)
• 1/4" power amp input jack for POD® amp and effect modelers
  
  Weight: 35 lbs
• Dimensions: 29" L x 14" H x 13" D
  
  Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinet
  
• Celestion® Vintage 30 4x12
  
  Weight: 83 lbs.
• Dimensions: 29" L x 30" H x 15" D

Order today with the protection of our 45-day lowest price and total satisfaction guarantees!

This Line 6 Half-Stack includes the HD 150 Guitar Amp Head and Spider III 4x12 stereo speaker cabinet.

The Line 6 Spider III HD150 Guitar Amplifier Head delivers killer amp and effects models, and a ton of presets created by some of the world's most notorious guitar stars from bands including 311, Thursday, Lacuna Coil, Hawthorne Heights, Slipknot, Ash, Albert Lee, Athlete, John 5, and many more!

Line 6 has also given the Spider III 120 another 150 song-based presets—sounds from such classics as No More Tears, Enter Sandman, Stinkfist, Back In Black, Bark at the Moon, and many more!. These presets combined with 7 quality effects models, make the Spider III a giant of tone that give you any sound you want, already dialed in. Now you can rule the stage with the Insane model with its truly massive gain or explore your sensitive side in the studio with the Clean model. It's all up to you.

New to the Spider III amplifier is a huge range of killer mid-gain guitar tones. A critical advancement was made to the sound and feel of the Spider III line when a discerning panel of artists focused in on the venerable "mid-gain" range of tone to deliver the complex, layered and dynamic amp tone we all appreciate from classic and boutique amps.

Amp Models:
Clean: Red LED - Select this Amp Model and adjust the tone controls to get crisp, amazing clean tones, great warm jazz tones, and all the high-end shimmer you'll need with a generous amount of bottom end.

Glassy: Green LED - Line 6 developed this Amp Model to emulate those late 60's and early 70's clean tones. It is like a 1973 Hiwatt Custom 100 with an extended tone control range and tightened up low end.

Twang: Red LED - This Amp Model draws on the mid 60's Fender amps, including the blackface '65 Twin Reverb and blackface '64 Deluxe Reverb. We wanted an Amp Model that has that classic glassy high-end tone, with some snap and bite.

Twin Twang: Green LED - This Amp Model is based on* a number of vintage tweed amps: a '53 Fender tweed Deluxe Reverb, '58 Fender tweed Bassman and a '60 Gibson Explorer to create a swingin' Rockabilly tone.

Blues: Red LED Based on* a mix of a '65 Marshall JTM-45, a '58 Fender Bassman, a '63 Fender Vibroverb and a Supro, this Amp Model slides between gritty swamp-infected cleans to syrupy smooth, walloping drive tones.

Class A: Green LED - This Amp Model is based on* a fawn Vox AC-30 amplifier with an updated and expanded tone control circuit. It captures that early British pop rock tone that the Beatles and the Stones are so well known for.

Crunch: Red LED - This sound was crafted from studies of the '68 Marshall Plexi 50 Watt. This type of Marshall amp was used by a number of early metal bands. Crunch provides a wider range of tone control settings than the original Marshall amp had.

On Fire: Green LED - This Amp Model is based on* a 68 Marshall Plexi 100 watt with a few added extras; The combination of a Variac and the jumped input channels creates that infamous brown sound.

Metal: Red LED - This Amp Model is based on* the Mesa/Boogie Dual Rectifier. Use this Amp Model to get a tight and punchy, high gain Metal sound.

Spinal Puppet: Green LED - This sound was created to be an aggressive high gain Amp Model with a unique Mid control that will sweep though an entire spectrum of tone on one knob. The Mid knob for this Amp Model changes the character of the distortion. When set to minimum, the distortion exhibits Fuzz pedal characteristics. When the Mid is set to noon, it mimics the creamy modern high gain amp tones. And when the Mid knob is turned up to max, it's very much reminiscent of that Class A sound.

Insane: Red LED - This model is a "dialed in for shredding" version based on* the Mesa/Boogie Dual Rectifier red channel. It combines the intensity and impact of Metal Red, but delivers more midrange and teeth for that bone-crushing, brain piercing insane grind.

80s Solo: Green LED - The goal with Insane is to provide you with as much input gain distortion as possible short of complete meltdown. You get an obscene helping of distortion, while still retaining tonal definition and character.

Effects:
A great amp isn't the only part of a great guitar sound. With Smart Control FX, an exclusive Line 6 feature that automatically dials in different effect parameters, you spend more time playing and less time tweaking. Simply find the effect that you want, turn the knob to your desired intensity, and you're done. You can even use multiple effects at the same if you wanna get really crazy.

Effects Models (Up to 3 effects simultaneous)
Phaser
Chorus/Flanger
Tremolo
Sweep Echo
Tape Echo
Reverb

Ins & Outs
When you're playing with your band on stage just drag the Spider III half-stack on stage and crank it up. When it comes time to record, use the headphone/direct out and plug it straight into the mixing board for world-class POD 2.0 direct tone used in pro studios and stages everywhere! You can also use the same out with headphones for practicing in your bedroom. Want to play along with your favorite songs? Plug into the CD/MP3 input and you're good to go.

Plug in and separate yourself from the rest of 'em.

*All product names used in this webpage are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Line 6's sound model development.

The Spider III 4x12 stereo speaker cabinet is designed to take all the punishing riffs your 150W Spider III HD head can throw out. With its custom-designed Celestion speakers, slanted cabinet, and stereo inputs, you'll have everything to make your Spider III HD head powerful and destructive. 27"W x 28"H x 11-1/2"D.

Line 6 HD150 Guitar Amp Head with Spider III 4x12 Cabinet Features:

• Spider III HD 150 Modeling Amp Head
  
  12 Custom Amp Models from Clean to Insane
• 7 Smart Control FX (up to 3 simultaneous) including Tape Echo, Sweep Echo, Standard Delay (all with Tap Tempo) Chorus/Flanger, Phaser, Tremolo, and Reverb
• 250 artist-created presets
• 150 song-based presets
• Plus 36 user programmable presets
• Built-in front panel tuner
• 150W Stereo (75W x 2)
  
  Spider III 4x12 stereo speaker cabinet
  
  4 - 12" Celestion speakers
• Roadworthy cab construction
• 27"W x 28"H x 11-1/2"D

Want more tone choices than you ever thought possible? Get the Spider - order today.

Includes the Line 6 HD75 guitar amplifier head and the Spider III 4x12 stereo speaker cabinet.

The Line 6 HD75 Head delivers 4 amp models-clean, crunch, metal, and insane—that cover a broad range of essential rock sounds. These basic sounds can then be modified with a selection of effects. Now you can rule the stage with the Insane model with its truly massive gain or explore your sensitive side in the studio with the Clean model. The Spider III will give you the dialed-in tone you want in an instant. Less tweaking. More playing.

New to the Spider III amplifier is a huge range of killer mid-gain guitar tones. A critical advancement was made to the sound and feel of the Spider III line when a discerning panel of artists focused in on the venerable "mid-gain" range of tone to deliver the complex, layered and dynamic amp sounds we all appreciate from classic and boutique amps.

Effects
A great amp isn't the only part of a great guitar sound. With Smart Control FX, an exclusive Line 6 feature that automatically dials in different effect parameters, you spend more time playing and less time tweaking. Simply find the effect that you want, turn the knob to your desired intensity, and you're done. You can even use multiple effects at the same if you wanna get really crazy.

Effects Models (Up to 2 effects simultaneous)
Phaser
Chorus/Flanger
Tremolo
Sweep Echo
Tape Echo
Reverb

Ins & Outs
When you're playing with your band on stage just drag the Spider III half-stack on stage and crank it up. When it comes time to record, use the headphone/direct out and plug it straight into the mixing board for world-class POD 2.0 direct tone used in pro studios and stages everywhere! You can also use the same out with headphones for practicing in your bedroom. Want to play along with your favorite songs? Plug into the CD/MP3 input and you're good to go.

Amp Models
Clean: Select this Amp Model and adjust the tone controls to get crisp, amazing clean tones, great warm jazz tones, and all the high-end shimmer you'll need with a generous amount of bottom end.

Crunch: This Amp Model is based on* a '68 Marshall Plexi 100 watt with a few added extras; The combination of a Variac and the jumped input channels creates that infamous brown sound.

Metal: This Amp Model is based on* the Mesa/Boogie Dual Rectifier. Use this Amp Model to get a tight and punchy, high gain Metal sound.

Insane: This model is Line 6's "dialed in for shredding" version based on* the Mesa/Boogie Dual Rectifier red channel. It combines the intensity and impact of Metal Red, but delivers more midrange and teeth for that bone-crushing, brain piercing insane grind.

Plug in and separate yourself from the rest of 'em.

*All product names used in this web page are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Line 6's sound model development.

The Spider III 4x12 stereo speaker cabinet is designed to take all the punishing riffs your 75W Spider III HD head can throw out. With its custom-designed Celestion speakers, slanted cabinet, and stereo inputs, you'll have everything to make your Spider III HD head powerful and destructive. 27"W x 28"H x 11-1/2"D.

Line 6 HD75 Guitar Amp Head with Spider III 4x12 Cabinet Features:

• Spider III HD75 guitar amp head
  
  4 Amp models: clean, crunch, metal, and insane
• 6 effects: phaser, chorus/flanger, tremolo, sweep echo, tape echo, reverb
• 4 user-programmable channels
• CD/MP3 in jack
• Headphone jack
• Tone controls
• Foot control jack footswitch jack compatible with the FBV2, FBV Express, and FBV Shortboard foot controllers
• Recording quality line out
• Tap button lets you set delay time, access tuner, boost distortion, and activate noise gate
• Smart control FX
  
  Spider III 4x12 stereo speaker cabinet
  
  4 - 12" Celestion speakers
• Roadworthy cab construction
• 27"W x 28"H x 11-1/2"D

Want a head that's packed with inspirational tones and effects? Get the Spider - order today!

This Line 6 full stack includes the HD147 300W Guitar Amp Head and both straight and slant Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinets.

HD147 300W Guitar Amp Head
The Line 6 HD147 Guitar Amp Head starts with models of 10 essential modern high-gain amps and 8 vintage power favorites. Then the Line 6 designers took the best attributes of every great high-gain amp to create 14 Line 6 custom amps that are truly outrageous. With 300W of power, it delivers everything from the obscene to the sparkly clean with headroom to spare. All encased in a beautiful chrome chassis.

Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinets
The Spider Valve 412VS speaker cab from Line 6 features Premium Celestion® Vintage 30 speakers for superior tone with the highest-definition. Combining the straight and slant Line 6 cabs with the HD147 guitar head gives you a full stack that can cause earthquakes! These closed-back cabs really let you open up your Line 6 HD147 head and the Spider Valve's rugged construction and upgraded finish will look great behind you onstage at the club, the hall, or the stadium!

Line 6 Line 6 HD147 and 412VS Full Stack Features:

• HD147 300W Guitar Amp Head
  
• Evolved Tone
• 8 coveted vintage amp models
• 10 essential modern tones
• 14 otherworldly custom tones from crystal clean to grinding mayhem
• Mix and match cabinet models
• Award-winning amp tone available at the stereo XLR direct outputs
  
  Obscenely Loud
• 300W stereo current based power amp
• Thick 'n' fast low end
• Miles of headroom
  
  Premium Effects
• 12 vintage effect models based on award-winning Line 6 Delay and Modulation Modeler pedals
  
  Connectivity
• MIDI compatibility allowing access to deep editing and the ToneTransfer Library (coming soon)
  
  Add an FBV Shortboard foot controller:
• Access to 36 presets on the HD147
• Dedicated, hands-free channel switches
• Dedicated reverb and FX loop On/Off switches
• Wah / Volume pedal with toe switch On/Off
• Expression pedal input for separate Volume control
• Chromatic tuner
• Program patch Naming
• Powered by the HD147
  
  Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinets
  
• Celestion® Vintage 30 4x12
  
  Weight: 83 lbs.
• Dimensions: 29" L x 30" H x 15" D

Equip yourself with enough explosive power to stop a Bradley Fighting Vehicle in its tracks. Order today.

This Line 6 half stack includes the HD147 300W Guitar Amp Head and a slant Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinet.

HD147 300W Guitar Amp Head
The Line 6 HD147 Guitar Amp Head starts with models of 10 essential modern high-gain amps and 8 vintage power favorites. Then the Line 6 designers took the best attributes of every great high-gain amp to create 14 Line 6 custom amps that are truly outrageous. With 300W of power, it delivers everything from the obscene to the sparkly clean with headroom to spare. All encased in a beautiful chrome chassis.

Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinet
The Spider Valve 412VS speaker cab from Line 6 features Premium Celestion® Vintage 30 speakers for superior tone of the highest-definition. This closed-back cab really lets you open up your Line 6 HD147 head and the Spider Valve's rugged construction and upgraded finish will look great behind you onstage at the club, the hall, or the stadium!

Line 6 Line 6 HD147 and 412VS Half Stack Features:

• HD147 300W Guitar Amp Head
  
• Evolved Tone
• 8 coveted vintage amp models
• 10 essential modern tones
• 14 otherworldly custom tones from crystal clean to grinding mayhem
• Mix and match cabinet models
• Award-winning amp tone available at the stereo XLR direct outputs
  
  Obscenely Loud
• 300W stereo current based power amp
• Thick 'n' fast low end
• Miles of headroom
  
  Premium Effects
• 12 vintage effect models based on award-winning Line 6 Delay and Modulation Modeler pedals
  
  Connectivity
• MIDI compatibility allowing access to deep editing and the ToneTransfer Library (coming soon)
  
  Add an FBV Shortboard foot controller:
• Access to 36 presets on the HD147
• Dedicated, hands-free channel switches
• Dedicated reverb and FX loop On/Off switches
• Wah / Volume pedal with toe switch On/Off
• Expression pedal input for separate Volume control
• Chromatic tuner
• Program patch Naming
• Powered by the HD147
  
  Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinet
  
• Celestion® Vintage 30 4x12
  
  Weight: 83 lbs.
• Dimensions: 29" L x 30" H x 15" D

Equip yourself with enough explosive power to stop a Bradley Fighting Vehicle in its tracks. Order today.

All the power you could possibly use, piles of models, and killer effects.

This Line 6 full stack includes the Vetta II HD 300W Stereo Guitar Amp Head and a slant Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinet.

Vetta II HD 300W Stereo Guitar Amp Head
The unbelievably authentic amp tones of the Line 6 Vetta II Amp Head are based on a world-class collection of vintage and modern amps. Combine them with models of the most sought after stompboxes to ever hit a pawn shop, plus a rack's worth of studio-grade post-processing gear, and you're halfway there. Vetta II also provides the unique Two Amps at Once feature, which allows you to use any 2 amp and cabinet models either independently or simultaneously. 300W stereo power section can cut through the most demanding performance situations, and also features elaborate pro connections to make it the perfect recording rig. Plus, a direct digital Variax Modeling Guitar input seamlessly integrates Variax's collection of guitars with Vetta II's collection of amps, cabs, and effects. Add an FBV pedal board, and this entire setup can be transformed into virtually any rig you can imagine with just the press of a footswitch. Vetta II amplifier head is the ultimate guitar rig.

Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinets
The Spider Valve 412VS speaker cabs from Line 6 features Premium Celestion® Vintage 30 speakers for superior tone of the highest-definition. These closed-back cabs really let you open up your Line 6 Vetta II HD head and the Spider Valve's rugged construction and upgraded finish will look great behind you onstage at the club, the hall, or the stadium!

Line 6 Veta II HD and 412VS Full Stack Features:

• Vetta II HD 300W Stereo Guitar Amp Head
  
• 300W stereo power section
• 64 factory and 64 user presets
• Vintage and modern amp modeling
• Stompbox models
• Studio-grade post-processing gear
• Unique Two Amps at Once feature
• Elaborate pro connections for recording
• Direct digital Variax Modeling Guitar input
• Routable effects loop
• Independent XLR balanced direct outs
• A.I.R. mic/speaker simulation
  
  Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinets
  
• Celestion® Vintage 30 4x12
  
  Weight: 83 lbs.
• Dimensions: 29" L x 30" H x 15" D

So everyone says you've got a big head? Now you can show 'em a REALLY big head. Make this full stack yours today!

All the power you could possibly use, piles of models, and killer effects.

This Line 6 half stack includes the Vetta II HD 300W Stereo Guitar Amp Head and a slant Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinet.

Vetta II HD 300W Stereo Guitar Amp Head
The unbelievably authentic amp tones of the Line 6 Vetta II Amp Head are based on a world-class collection of vintage and modern amps. Combine them with models of the most sought after stompboxes to ever hit a pawn shop, plus a rack's worth of studio-grade post-processing gear, and you're halfway there. Vetta II also provides the unique Two Amps at Once feature, which allows you to use any 2 amp and cabinet models either independently or simultaneously. 300W stereo power section can cut through the most demanding performance situations, and also features elaborate pro connections to make it the perfect recording rig. Plus, a direct digital Variax Modeling Guitar input seamlessly integrates Variax's collection of guitars with Vetta II's collection of amps, cabs, and effects. Add an FBV pedal board, and this entire setup can be transformed into virtually any rig you can imagine with just the press of a footswitch. Vetta II amplifier head is the ultimate guitar rig.

Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinet
The Spider Valve 412VS speaker cab from Line 6 features Premium Celestion® Vintage 30 speakers for superior tone of the highest-definition. This closed-back cab really lets you open up your Line 6 Vetta II HD head and the Spider Valve's rugged construction and upgraded finish will look great behind you onstage at the club, the hall, or the stadium!

Line 6 Veta II HD and 412VS Half Stack Features:

• Vetta II HD 300W Stereo Guitar Amp Head
  
• 300W stereo power section
• 64 factory and 64 user presets
• Vintage and modern amp modeling
• Stompbox models
• Studio-grade post-processing gear
• Unique Two Amps at Once feature
• Elaborate pro connections for recording
• Direct digital Variax Modeling Guitar input
• Routable effects loop
• Independent XLR balanced direct outs
• A.I.R. mic/speaker simulation
  
  Spider Valve 412VS 240W 4x12 Guitar Speaker Cabinet
  
• Celestion® Vintage 30 4x12
  
  Weight: 83 lbs.
• Dimensions: 29" L x 30" H x 15" D

So everyone says you've got a big head? Now you can show 'em a REALLY big head. Make this half stack yours today!

This half stack includes the Marshall 1959HW Handwired Plexi Amp Head and Marshall 1960AHW or 1960BHW 120W 4x12 Extension Cabinet.

Marshall 1959HW Handwired Plexi Amplifier Head
The 1959HW is a handwired reissue of a circa 1967 100W Superlead head. Since 1967 when the JMP (Jim Marshall Products) Plexi panels were introduced, the Superlead head has been the benchmark for all-tube distortion and tight crunch. Tube lineup includes 4 EL34s in the power section and 3 ECC83s in the preamp. True bypass effects loop, 3-band EQ, and presence control.

Marshall 1960AHW or 1960BHW 120W 4x12 Extension Cabinet
The Marshall 1960 AHW or 1960BHW Extension Speaker Cabinet is a hand-soldered, 120W, mono, 16-ohm 4x12" guitar speaker cabinet with salt 'n' pepper grille cloth, metal handles, loaded with reissue 30W Celestion G12H speakers.

Marshall 1959HW and 1960AHW or 1960BHW Half Stack Features:

• Marshall 1959HW Handwired Plexi Head
• Handwired reissue of 1967 Superlead
• 100W
• 4 EL34 power tubes
• 3 ECC83 preamp tubes
• True bypass effects loop
• 3-band EQ
• Presence control
  
  Marshall 1960AHW or 1960BHW 120W 4x12 Extension Cabinet
• Hand soldered
• 4x12" cabinet
• 120W
• Mono
• 16 ohm
• Salt 'n' pepper grille
• Metal handles
• Reissue 30W Celestion G12H speakers

Thirsty for more power and tube tone? Get the original quencher for a dry guitar tone. Order today.

This Marshall full stack includes a 1959HW head, a 1960AHW angled extension cab, and a 1960BHW straight extension cab.

Marshall 1959HW Handwired Plexi Head
The Marshall 1959HW amp head is a handwired reissue of a circa 1967 100W Superlead head. Since 1967 when the JMP (Jim Marshall Products) Plexi panels were introduced, the Superlead head has been the benchmark for all-tube distortion and tight crunch. Tube lineup includes 4 EL34s in the power section and 3 ECC83s in the preamp. True bypass effects loop, 3-band EQ, and presence control.

Marshall 1960AHW & 1960BHW 120W 4x12 Extension Cabinets
The 1960AHW and 1960BHW are hand-soldered, 120W, mono, 16-ohm 4x12" guitar speaker cabinets with salt 'n' pepper grille cloths, metal handles, loaded with reissue 30W Celestion G12H speakers.

Marshall 1959HW, 1960AHW, and 1960BHW Full Stack Features:

• Marshall 1959HW Handwired Plexi Head
• Handwired reissue of 1967 Superlead
• 100W
• 4 EL34 power tubes
• 3 ECC83 preamp tubes
• True bypass effects loop
• 3-band EQ
• Presence control
  
  Marshall 1960AHW & 1960BHW 120W 4x12 Extension Cabinets
• Hand soldered
• Mono
• 16 ohms
• Salt 'n' pepper grilles
• Metal handles
• Reissue 30W Celestion G12H speakers

Don't settle for less...if you want massive Marshall sound, this is the rig. Order now!