JVM410H Tube Amp Head

In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall guitar amp head to date-and that's really saying something.

Each of its 4 channels-Clean, Crunch, OD1 & OD2-are not only completely independent of each other, they all boast 3 modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshalls in one.

The JVM410H amp head has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to control-Volume, Bass, Middle, Treble & Gain-accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls-2 Master Volumes plus Resonance & Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amplifier's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410H all-valve guitar amp head will give you whatever tone you need right when you need it.

1960A and 1960B 300W 4x12 Guitar Extension Cabinet

The Marshall 1960 Speaker Cabinet puts out beautiful tone at any volume. The addition of an impedance (4 or 16 ohm) mono/stereo switching mechanism has transformed the "industry standard" 1960 into the ultimate speaker cab. These 300W Marshall speaker cabinets are loaded with Celestion Vintage speakers. The 1960A cab is angled. The 1960B cab is straight.

Marshall JVM Series JVM410H and 1960A or 1960B Half Stack Features:

• Head:
• 100-watt valve head
• Valve complement: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable digital reverb with level controls for all 4 channels.
• 2 footswitchable master volumes
• Two FX loops Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England
  
  Cabinet:
• Speaker type: Celestion G12T-75W
• Speaker configuration: 4x12"
• Power (RMS): 300W
• Selectable mono/stereo: Yes
• Impedance stereo/mono: 8 Ohm, 16/4 Ohm
• 30"W x 32-3/4"H x 14-1/4"D
• 82 lbs.

Save BIG when you buy today!

This half stack includes the Marshall JVM410H Tube Amp Head and 1960V Vintage Speaker Cabinet.

JVM410H Tube Amp Head
In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-Watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall to date and that's really saying something!

Each of its 4 channels Clean, Crunch, OD1 & OD2 are not only completely independent of each other, they all boast 3 Modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshalls in one!

The JVM410H amp head has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to controls Volume, Bass, Middle, Treble & Gain accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls 2 Master Volumes plus Resonance & Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410H all-valve amp head will give you whatever tone you need right when you need it.

1960V Vintage Speaker Cabinet
The Marshall 1960V Vintage Speaker Cabinet puts out beautiful tone at any volume. The addition of an impedance (4 or 16 ohm) mono/stereo switching mechanism has transformed the "industry standard" 1960 into the ultimate speaker cab. This 280W Marshall cab is loaded with Celestion Vintage 30 speakers.

Marshall JVM Series JVM410H and 1960AV or 1960BV Half Stack Features:

• JVM410H Tube Amp Head
• 
  
• 100-Watt valve head
• Valve complement: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable digital reverb with level controls for all 4 channels.
• 2 footswitchable master volumes
• Two FX loops Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England
  
  1960V Vintage Speaker Cabinet
  
• 280W handling
• 4 - 12" Celestion Vintage 30 speakers
• Impedance (4 or 16 ohm) and mono/stereo switching

No backline would be complete without the legendary Marshall head and 4x12 cab. Order now.

This Marshall full stack includes one JVM410H Tube Amp Head and a 1960A angled cab with a 1960B straight cab for some serious stage presence.

JVM410H Tube Amp Head
In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-Watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall to date-and that's really saying something!

Each of its 4 channels Clean, Crunch, OD1 & OD2 are not only completely independent of each other, they all boast 3 Modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshalls in one!

The JVM410H amp head has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to controls Volume, Bass, Middle, Treble & Gain-accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls-2 Master Volumes plus Resonance & Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410H all-valve amp head will give you whatever tone you need right when you need it.

1960A and 1960B 300W 4x12 Guitar Extension Cabinet
The Marshall 1960 Speaker Cabinet puts out beautiful tone at any volume. The addition of an impedance (4 or 16 ohm) mono/stereo switching mechanism has transformed the "industry standard" 1960 into the ultimate speaker cab. These 280W Marshall cabs are loaded with Celestion Vintage speakers. The bottom cabinet is traditionally square-shaped with casters while the top speaker has an angled front.

Marshall JVM Series JVM410H, 1960A and 1960B Full Stack Specifications:

• 1960A and 1960B 300W 4x12 Guitar Extension Cabinet
• \Speaker Type: Celestion G12T-75W
• Speaker Configuration: 4 x12
• Power (RMS): 300W
• Selectable Mono/Stereo: Yes
• Impedance Stereo/Mono: 8 ohm, 16/4 ohm
• 30"W x 32-3/4"H x 14-1/4"D
• 82 lbs.

Marshall JVM Series JVM410H, 1960A and 1960B Full Stack Features:

• JVM410H Tube Amp Head
• 100-Watt valve head
• Valve complement: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels-Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable digital reverb with level controls for all 4 channels.
• 2 footswitchable master volumes
• Two FX loops-Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England
  
  1960A or 1960B 300W 4x12 Guitar Extension Cabinets
• Bottom cabinet is square with caster wheels
• Top cabinet's front angles back and rests on on top of other cabinet.

Get a start on a super stack. Order today.

Get more punch and crunch with this Marshall full stack featuring a JVM410H Tube Amp Head with a 1960AV/1960BV Full Stack.

JVM410H Tube Amp Head
In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-Watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall to date-and that's really saying something!

Each of its 4 channels Clean, Crunch, OD1 & OD2 are not only completely independent of each other, they all boast 3 Modes, all 12 of which are footswitchable and feature their own unique gain structure. It makes the JVM 4-channel effectively 12 Marshalls in one!

The JVM410H amp head has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are equipped with master controls.

Even though the head and combo both house 28 controls and 8 LED switches on their front panels, they're incredibly simple to understand because of the extremely logical layout. Each of the 4 channels has the usual suspects when it comes to controls Volume, Bass, Middle, Treble & Gain-accounting for 20 of the 28 controls right away. Take away the 4 reverb controls and you're only left with 4 Master controls-2 Master Volumes plus Resonance & Presence.

Add to this an ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI and you're looking at an incredibly flexible amp! The 6-way footswitch boasts 7 LEDs and memory, plus it connects to the amp via a regular guitar cable.

From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM410H all-valve amp head will give you whatever tone you need right when you need it.JVM410H Tube Amp Head
In a nutshell, the Marshall all-valve, 4-channel JVM410H 100-Watt tube head is the most versatile Marshall amplifier ever made. It also boasts more gain than any other Marshall to date-and that's really saying something!

1960AV and 1960BV 280W 4x12 Guitar Extension Cabinet
The Marshall 1960V Vintage Speaker Cabinet puts out beautiful tone at any volume. The addition of an impedance (4 or 16 ohm) mono/stereo switching mechanism has transformed the "industry standard" 1960 into the ultimate speaker cab. This 280W Marshall cab is loaded with Celestion Vintage 30 speakers.

Marshall JVM Series JVM410H, 1960AV and 1960BV Full Stack Specifications:

• 1960AV and 1960BV 280W 4x12 Guitar Extension Cabinet
• 280W handling
• 4 x 12" Celestion Vintage 30 speakers
• Impedance (4 or 16 ohm) And mono/stereo switching

Marshall JVM Series JVM410H, 1960AV and 1960BV Full Stack Features:

• JVM410H Tube Amp Head
• 100-Watt valve head
• Valve complement: 5 x ECC83 (12AX7s) in preamp, 2 x EL34s in power amp
• 4 independent, footswitchable channels-Clean, Crunch, OD1 & OD2
• Each channel boasts 3 footswitchable modes Green, Orange & Red
• Studio quality, footswitchable digital reverb with level controls for all 4 channels.
• 2 footswitchable master volumes
• Two FX loops-Series/Parallel & Parallel
• Series/Parallel FX loop is footswitchable
• Emulated line out
• 6-way, 7-LED footswitch with memory capabilities (UK patent pending)
• All switching can be done via MIDI
• Made in England
  
  1960AV and 1960BV 280W 4x12 Guitar Extension Cabinet
• Bottom cabinet has casters and straight front
• Top cab easily stacks on top and has an angled front

No backline would be complete without the legendary Marshall 4x12 cab. Order now.

The Marshall MG100HDFX/MG412A Purple Half Stack features the MG100HDFX Guitar Amp Head and the MG412A Angled Guitar Extension Speaker Cabinet in an awesome purple finish.

MG100HDFX Guitar Amp Head
Boasting the same impressive features and staggering versatility of the Marshall MG100DFX combo, this awesome, 100W amp head will drive any speaker cabinet from the Marshall Range, but it is best suited to the MG412A (angled) and MB421B (straight) 120W 4x12" speaker cabs. Unbelievable tone, feel and projection comes standard.

MG412A Angled Guitar Extension Speaker Cabinet
The perfect companion for theMarshall MG100HDFX Guitar Amp Head, the MG412A Angled Guitar Extension Speaker Cabinet features 4 premium Celestion 30W 12" speakers in the coolest purple cabinet to ever rock the planet! This Marshall speaker cabinet is bright and punchy with tight lows. The angled speaker cab lets you hear yourself while you blow the house down. The Marshall MG412A cab is rock-solid and roadworthy. (Casters not included.)

Marshall Limited Edition MG100HDFX and MG412A Purple Half Stack Specifications:

• MG100HDFX
• Dimensions: 23.22"w x 9.96"h x 10.62"d (590w x 253h x 270d mm),
• Weight: 28.22 Lb. (12.8 kg)
• Footswitch (supplied): PEDL-90004
  
  MG412A Angled Guitar Extension Speaker Cabinet
• 120 Watts
• 4 x 12" Celestion 30 Watt speakers
• 8 Ohms
• casters not included
• Dimensions (W x H x D): 26.4 x 26.4 x 14.0 in.

Marshall Limited Edition MG100HDFX and MG412A Purple Half Stack Features:

• MG100HDFX
• 100W Output
• 2 Channels
• Separate EQ Per Channel
• Clean/Crunch Switch
• OD1/OD2 Switch
• Contour Control
• Footswitchable Channels
• CD Input
• Emulated Line Out
• Emulated Headphone Jack
• Footswitchable Digital FX
• Digital Reverb
• FX Loop
• FX Loop Level and Mix Control

Save BIG when you buy today!

This Marshall half stack includes the MG100HDFX amplifier head and the MC412 4x12 200W guitar speaker cabinet.

Marshall MG100HDFX Head
Drawing on the vast experience of their design team, the Marshall MG100HDFX Head amps are built to the same exacting standards as all Marshall products. Though compact in size, each guitar amplifier delivers a dynamic yet toneful punch, and they're all suitable for a wide variety of purposes including rehearsal, recording, and even live music work. The MG100DFX is a 2-channel amp with special features such as FDD (Frequency Dependent Damping), CD ins, plus emulated line out, and emulated headphone jacks. The Marshall amp features digital effects including reverb, delay, chorus, and flange. With 100W, this is a fully gig-capable amp, and it retains all the features that make it great for practice, too.

Marshall MC412 4X12 200W Guitar Speaker Cabinet
The sonic power and iconic presence of a Marshall stack has been the dream of many guitarists. Marshall fulfills those dreams and presents the MC cabinet series. This series of guitar speaker cabinets puts a real Marshall stack within reach of many for the first time.

Made at the UK factory and loaded with Celestion speakers, Marshall engineers have worked hard to ensure that these are the most affordable full size Marshall guitar speaker cabinets available, while still providing the sonics and build quality that are more than worthy of the badge they wear.

The MC412's 200 Watts of power, combined with the same flexible Mono/Stereo switching of the 1960 cabinets, means it will handle any Marshall guitar head with ease. Marshall recommends using 4 Ohms for getting full power out of the MG and AVT heads, while the 16 Ohms setting is preferable for use with Marshall valve heads.

Marshall MG100HDFX and MC412A or MC412B Half Stack Features:

• Marshall MG100HDFX Head
• Big Marshall tone
• Delivers a dynamic yet toneful punch
• 100W power
• 2 channels (footswitchable)
• Digital effects including reverb, delay, chorus, and flange
• FDD (Frequency Dependent Damping)
• CD ins, plus emulated line out, and emulated headphone jacks
• 25"W x 14"H x 12"D
• 39 lbs.
  
  Marshall MC412 4X12 200W Guitar Speaker Cabinet
• Speaker: Platform 50
• Configuration: 4 x 12"
• Power (RMS): 200 Watt
• Mono/Stereo selectable
• Impedance (Mono): 16/4 Ohm
• Impedance (Stereo): 8 Ohm
• Dimensions: 30.3" x 29.75" x 14.4"(770 x 755 x 365 mm)
• Weight: 75 lbs. (34 kg)

It's all Marshall, and it's priced easy. Order today.

This half stack includes the Marshall MG100HDFX Head and MG412 Speaker Cabinet.

Marshall MG100HDFX Amplifier Head
Drawing on the vast experience of their design team, the Marshall MG100HDFX Head amps are built to the same exacting standards as all Marshall products. Though compact in size, each one delivers a dynamic yet toneful punch, and they're all suitable for a wide variety of purposes including rehearsal, recording, and even live music work. The MG100DFX is a 2-channel amplifier with special features such as FDD (Frequency Dependent Damping), CD ins, plus emulated line out, and emulated headphone jacks. It features digital effects including reverb, delay, chorus, and flange. With 100W, this is a fully gig-capable guitar amp, and it retains all the features that make it great for practice, too.

MG412 Cabinet
The 8-ohm, 120W MG412 Speaker Cabinet is loaded with 4 - 12" custom-voiced Marshall/Celestion speakers that really crank out that authentic Marshall tone. Consummately road-ready with reinforced corners, recessed and side bar handles. Angled (MG412A) or straight-front (MG412B) configuration. 26-3/8"W x 26-3/8"H x 14"D. 65 lbs.

Marshall MG100HDFX and MG412A or MG412B Half Stack Features:

• Marshall MG100HDFX Amp Head
• Big Marshall tone
• Delivers a dynamic yet toneful punch
• 100W power
• 2 channels (footswitchable)
• Digital effects including reverb, delay, chorus, and flange
• FDD (Frequency Dependent Damping)
• CD ins, plus emulated line out, and emulated headphone jacks
• 25"W x 14"H x 12"D
• 39 lbs.
  
  MG412 Cabinet
• 4 - 12" custom-voiced Marshall/Celestion speakers
• Angled or straight-front configuration
• 8 ohm
• Handles 120W

It's all Marshall, and it's priced easy. Order today.

The MG1000HDFX head features 2 footswitchable channels that deliver 100 watts of genuine Marshall tone with digital effects, line out, and headphone jacks. Pair that with the MG412B straight-front cab loaded with 4 Celestion/Marshall speakers, and you've got a 1-2 sonic punch that'll leave the fans screaming for more!

Marshall MG100HDFX/MG412 Half Stack with Digital Effects Features:

• MG100HDFX head:
• Delivers a dynamic yet toneful punch
• 100W
• 2 channels (footswitchable)
• Digital effects including reverb, delay, chorus, and flange
  
  MG412B straight cabinet:
• 4 - 12" custom-voiced Marshall/Celestion speakers
• 8 ohm
• Handles 120W

The perfect pair can be yours - call or click and make it happen TODAY!

The Marshall MG100DFX is a 2-channel amp with special features such as FDD (Frequency Dependent Dampening), CD iputs, plus emulated line out, and emulated headphone jacks. It features digital effects including reverb, delay, chorus, and flange. With 100W, this is a fully gig-capable amp and it retains all the features that make it great for practice, too.

The Marshall MG412 straight cab is the perfect match to the MG100HDFX. This 8 ohm, 120W cab is loaded with 4 - 12" custom-voiced Marshall/Celestion speakers and finished in rugged black Tolex.

Marshall MG100HDFX/MG412 Slant Cab Half Stack Package Features:

• The MG100HDFX:
• Big Marshall tone
• 100W power
• 2 channels (footswitchable)
• Digital effects including reverb, delay, chorus, and flange
• FDD (Frequency Dependent Dampening)
• CD ins, plus emulated line out, and emulated headphone jacks
• 25"W x 14"H x 12"D
• 39 lbs.
  
  The MG412:
• 4 - 12" custom-voiced Marshall/Celestion speakers
• 8 ohms
• Handles 120 watts

Save big when you buy the package - DO IT TODAY!

Its 15W head and 2 - 10" speaker cabinets create a stack that is only 15"W x 37"H x 9"D, but the Marshall MG15MSII Micro Stack puts out a tone that's far from miniature. The head has all the standard MG features: control for clean volume; overdrive gain and volume; reverb level; and 3-way EQ with bass, treble, and a contour that lets you fine-tune the mids. It also boasts a CD input, an emulated line out, and a headphone jack that mutes the speakers.

Marshall MG15MSII Micro Stack Specifications:

• Dimensions: 15"W x 37"H x 9-1/4"D
• Weight: 46-1/2 lb.

Marshall MG15MSII Micro Stack Features:

• 15W head
• 2 - 10" speaker cabinets
• 2 channels
• Bass, treble, and contour EQ controls
• CD input
• Emulated line out
• Headphone jack with speaker muting

Think small but sound big. Order your Marshall MG Micro Stack today.

The Marshall MS-4 Micro Stack features 2 speaker cabs with a head, and it stands only 9-3/4" high. Includes fully functioning Gain, Volume, and Tone controls. The Marshall Micro Stack is powered by a 9V battery.

Marshall MS-4 Micro Stack Features:

• Smokin' stack design
• Screamin' stack sound
• Functional gain, volume, and tone controls

Here's a stack you don't need two roadies to carry. Put it in the cart.

The Marshall MS-4 Micro Stack features 2 speaker cabs with a head, and it stands only 9-3/4" high. Includes fully functioning Gain, Volume, and Tone controls. The Marshall Micro Stack is powered by a 9V battery.

Marshall MS-4 Micro Stack - Scratch 'n' Dent As Is Features:

• Smokin' stack design
• Screamin' stack sound
• Functional gain, volume, and tone controls

Here's a stack you don't need two roadies to carry. Put it in the cart.

This half stack includes the Marshall Vintage Modern 2266 Tube Amp Head and Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet.

Marshall Vintage Modern 2266 Tube Amplifier Head
The Marshall Vintage Modern 2266 50 Watt Head is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effect to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.

The cosmetics on the Marshall 2266 amp head are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet
The Marshall Vintage Modern 425A angled cab and 425B straight guitar speaker extension cabinets are traditional Marshall 4 x 12 speaker cabs in design. These cabs are mono/stereo switchable and are loaded with G12C 25 Watt Celestion Greenbacks. These were specifically developed for the Limited Edition Jimi Hendrix Super100JH stack and are voiced to give that rich and balanced harmonic timbre that complements vintage tone and the Vintage Modern Series perfectly.

The cosmetics on the Marshall speaker cab are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2266 and 425A or 425B Half Stack Features:

• Marshall Vintage Modern 2266 Tube Amp Head
• 50-Watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England
• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
• Weight: 39.6 lbs (18 kg)
  
  Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet
• 100-Watt, 4x12" cabinet
• Angled front
• Loaded with Celestion G12C 25 Greenbacks
• Mono or Stereo switchable
• 16 Ohms/4 Ohms mono
• 8 Ohms stereo
• Birch ply construction
• "finger-locking" joints
• Made in England
• Impedance
• Mono 16 Ohms/4 Ohms
• Stereo 8 Ohms/8 Ohms
• Dimensions 30.5" x 30" x 14.5" (770 x 755 x 365 mm)
• Weight
• 425A: 79 lbs. (36 kg)
• 425B: 81.5 lbs (37 kg)

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

This Marshall full stack includes one 2266 amp head, one 425A angled speaker cab, and one 425B straight speaker cab.

Marshall Vintage Modern 2266 Tube Amp Head
This head is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.
Two frequency selective Pre-amp Volumes (Gains)-Body and Detail-facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.
A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.
Finally, a series FX loop is provided for those players who wish to use outboard effect to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.
The cosmetics are also a carefully crafted hybrid of old and new styles-made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 425A & 425B 4x12 Extension Speaker Cabinets
These cabinets are traditional Marshall 4 x 12 speaker cabs in design. These cabs are mono/stereo switchable and are loaded with G12C 25 Watt Celestion Greenbacks. These were specifically developed for the Limited Edition Jimi Hendrix Super100JH stack and are voiced to give that rich and balanced harmonic timbre that complements vintage tone and the Vintage Modern Series perfectly.
The cosmetics are also a carefully crafted hybrid of old and new styles-made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2266, 425A and 425B Full Stack Specifications:

• Marshall Vintage Modern 2266 Tube Amp Head
• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230mm)
• Weight: 39.6 lbs. (18 kg)
  
  Marshall Vintage Modern 425A & 425B 4x12 Extension Speaker Cabinets
• Dimensions: 30.5" x 30" x 14.5" (770 x 755 x 365mm)
• 425A weight: 79 lbs. (36 kg)
• 425B weight: 81.5 lbs. (37 kg)

Marshall Vintage Modern 2266, 425A and 425B Full Stack Features:

• Marshall Vintage Modern 2266 Tube Amp Head
• 50-watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp
• Master Volume with two Gain Controls-Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England
  
  Marshall Vintage Modern 425A & 425B 4x12 Extension Speaker Cabinets
• 100-watt cabinets
• Loaded with Celestion G12C 25 Greenbacks
• Mono or Stereo switchable
• 16 ohms/4 ohms mono
• 8 ohms stereo
• Birch ply construction
• "finger-locking" joints
• Made in England

Make an investment in your sound that will pay dividends for years to come. Order now with the protection of our 45-day lowest price and total satisfaction guarantees

There's nothing micro about Zakk Wylde, but even Zakk doesn't always haul his full-sized Marshall everywhere he goes - like backstage to warm up. This 15W head and 2 cabs each with a 10" speaker create a stack that is only 15"W x 37"H x 9"D, but the Marshall MG15MSZW Microstack puts out a tone that's far from miniature. The head has all the standard MG features: control for clean volume; overdrive gain and volume; reverb level; and 3-way EQ with bass, treble, and a contour that lets you fine-tune the mids. It also boasts a CD input, an emulated line out, and a headphone jack that mutes the speakers.

Conceived by Dr. Jim Marshall after he and Zakk had shared a few whiskeys, this Zakk Wylde version of the Microstack sports salt & pepper grille cloth and a custom Zakk control panel with the famous bullseye pattern.

Marshall Zakk Wylde MG15MSZW Limited Edition Micro Stack Features:

• 15W head
• Angled & straight 1x10" cabinets
• Replicates the exact look of Zakk's legendary "Wall of Doom
• 2 channels - clean and "crushing" overdrive
• Spring Reverb
• Bass, treble, and contour EQ controls
• CD/MP3 input
• Emulated line out
• Headphone jack with speaker muting
• Zakk Wylde Bullseye control panel
• Salt & Pepper grille cloth

Marshall Zakk Wylde MG15MSZW Limited Edition Micro Stack Includes:

• Signature picks and poster

Think small but sound big. Order your Zakk Wylde MG Microstack today!

This Peavey half-stack includes the 6505 Plus 120W guitar amp head and 6505 4x12 300W guitar speaker cabinet.

The Peavey 6505 Plus 120W Guitar Amp Head is great for hardcore or metal bands. 6 - 12AX7s in the preamp add up to even more terrifying punch and mind-rattling gain. Includes footswitchable lead/rhythm channel select, effects loop, 3-band EQ, plus resonance and presence controls on each channel. Rhythm channel includes pre/post gain controls and bright/crunch switches. Lead channel includes pre/post gain controls only. Preamp output. Footswitch included. 4, 8, or 16 ohms.

The 6505 Series guitar amplifiers are named in celebration of Peavey's first 40 years, (1965-2005.) While known as the 5150 Series, these amps became the undisputed go-to guitar amps for scores of rock, hardcore, and metal bands because of their raw tone, relentless power, and road-proven reliability.

The Peavey 6505 4x12 300W Guitar Cabinet has 4 - 12" Sheffield 1200 speakers loaded in a biplanar-aligned, infinite baffle, 300W closed-back cab. This Peavey speaker is constructed from high-density plywood. It has recessed handles and heavy-duty casters. 1/4" and XLR jacks. 16 ohms.

Made in the USA.

Peavey 6505 Plus Half Stack Features:

• 6505 Plus 120W Guitar Amp Head
  
  120W
• Preamp: 6 - 12AX7s
• Power amp: 4 - 6L6s
• Footswitchable lead/rhythm channels
• Effects loop
• 3-band EQ
• Resonance control
• Presence control
• 4, 8, or 16 ohms
  
  6505 4x12 300W Guitar Cabinet
  
  4 - 12" speakers
• 300W handling
• 1/4" and XLR jacks
• High-density plywood construction
• Recessed handles
• Heavy-duty casters
  
  Made in the USA

Miles of gain and tone deeper than the Grand Canyon. Call or click to get yours.

This Half-Stack includes the Peavey JSX Joe Satriani Signature guitar amp Head and the JSX 412 Speaker Cabinet.

The Peavey JSX Joe Satriani Signature Head tears up the competition. Joe Satriani is undoubtedly one of the greatest guitar players of all time, and Peavey has built him an amp with the sound, feel, and flexibility he's always sought. With a punchy gain structure that boosts your playing with authority, this amp delivers sounds ranging from Classic 50 to vintage British, modern Triple XXX, and all the in-between tones.

The versatile and comprehensive control section supplies a master volume pot and independent volume knobs for each of the three channels (Ultra, Crunch, and Clean). Tone shaping is accomplished through passive controls for Bass, Mid, and Treble on the Clean channel, while the Ultra and Crunch channels use active Bottom, Body, and Hair (lo, mid, hi) controls. The Clean channel is pristine yet warm and is specifically voiced to work well with effects pedals. The Ultra and Crunch channels have gain controls and fat switches to further assist in taming this thunderous tube-powered beast while achieving killer sound.

Global resonance and presence knobs increase control of high-end tones, while a noise gate on the Crunch and Ultra channels cuts down on the excess noise generated by running the gain and EQ controls on high settings. Since the gate is fully adjustable, you can really clamp down, leave it slightly open, or just turn it off.

The JSX uses 3 - 12AX7 preamp tubes and 4 - EL34 power amp tubes. The power amp section delivers an earth-quaking 120W of pure tube power and can be converted to 4 - 6L6GC. It is also designed to work equally well into 4-, 8-, or 16-ohm loads.

With 400W of continuous power handling and four 12" custom JSX speakers, the Peavey JSX 412 Speaker Cabinet is the perfect compliment to the JSX amplifier. Co-designed by guitar legend Joe Satriani, the JSX 412 speaker cab features a microphone-simulated XLR direct output so you get Joe's live, onstage tone (speakers remain active when direct output is used) without using a separate mic and stand.

Made in the USA.

Peavey JSX Half-Stack Specifications:

• JSX Joe Satriani Signature Head
  
  26-5/8"W x 11-1/4"H x 11"D
• 50-3/4 lbs.
  
  JSX 412 Speaker Cabinet
  
  30.062"W x 31.875"H x 14.25"D
• 93 lbs.

Peavey JSX Half-Stack Features:

• JSX Joe Satriani Signature Head
  
  Designed to Joe Satriani's specifications
• Global Resonance and Presence controls
• 120W of pure tube power
• 3 channels: Ultra, Clean, and Crunch
• 3-band EQ on each channel
• Punchy high-gain structure on the Crunch and Ultra channels
• Comes with EL34 tubes, but can be configured for 6L6 tubes
• Fully adjustable noise gate for the Crunch and Ultra channels
• Separate Fat switches on the Crunch and Ultra channels
• All controls located on the front panel
• Noise gate
• Uses 3 - 12AX7 preamp tubes and 4 - 6L6GC power amp tubes
• Master volume
• Independent volume knobs
• Passive controls for bass, mid, and treble on the Clean channel
• Ultra and Crunch channels use active Bottom, Body, and Hair (lo, mid, hi) controls
• 4-, 8-, or 16-ohm loads
  
  JSX 412 Speaker Cabinet
  
  400Ws continuous power handling
• 16 ohms mono
• Four 12" custom JSX speakers (rear-mounted)
• 11-ply birch baffle
• Microphone-simulated XLR direct output
• Black weave grille cloth with JSX logo
  
  Made in the USA

If you're serious about your tone and need a highly versatile all-tube half-stack, look no further. This one has it all—order now!

The Peavey Penta Half-Stack includes the Penta tube guitar amp head and Penta 412 speaker cabinet.

Single-channel Penta tube amp head with selectable EQ/gain voicings gives you 5 different personalities to choose from. 4 matched EL34 tubes and 4 - 12AX7 tubes, with ceramic tube sockets, large custom transformers, and superior components give you the vintage rock tones you're searching for. Provides 140W RMS into 16, 8, or 4 ohms.

The Penta Head's 5 classic gain voicings use all-analog Pentatone circuitry and are accessible via a rotary knob and identified by corresponding icons. All you need to do is plug in and play.

Voices:
• Star reveals a classic British "plexi" voicing
• Bull produces a modified British voicing with tons of added gain and a tighter low end
• Tree lays on a thicker British voicing with a loose attack and slightly more gain
• Mudflap Girl is a super-high-gain voicing with a more responsive EQ and power amp section (think Triple XXX)
• Cactus is, simply put, Texas fat and clean

The Peavey Penta 412 cabinet is specially voiced for use with the Penta Head. 4 - 12" rear-mounted speakers, 11-ply birch baffle, and 1/2" poplar sides with a striking brown-weave grille cloth.

Peavey Penta Half-Stack Specifications:

• Penta tube guitar amp head
  
  Rated Power and Load:
• 140W RMS into 16, 8, & 4 ohms
• External jacks are paralleled - 4 ohms minimum
  
  The following specs are measured @ 1kHz with the controls preset as follows:
• Bass, Treble & Mid EQ @ 5
• Master Volume @ 1O
• (Nominal levels are with Pre Gain @ 5. Minimum levels are with Pre Gain @ 10.)
  
  Preamp Input Section (1st channel):
• Nominal Input Level: 0dBV, 1V RMS
• Minimum Input Level: -20dBV, 100 mV RMS
• Maximum Input Level: 6dBV, 2V RMS
  
  System Signal-to-Noise:
• (1st channel - 20Hz to 20kHz unweighted)
• (Pre Gain set halfway)
• Greater than 80dB below rated power
  
  Equalization:
• Custom Bass, Mid, & Treble passive type EQ for each mode
  
  Power consumption:
• Domestic: 300 watts, 60 Hz, 120 VAC
• Export: 300 watts, 50/60 Hz, 220-230/240 VAC
  
  Dimensions:
• 17.875"H x 21.375"W x 10.25"D
• (45.40 cm x 54.29 cm x 26.03 cm)
  
  Weight:
• 57.8 lbs. (26.24 kg) with power supply
  
  Penta 412 cabinet
  
  Dimensions
• 30"W x 32"H x 14.125"D (Unpacked)
• 32.5"W x 35.5"H x 17"D (Packed)
  
  Weight
• 90.5 lbs. (Unpacked)
• 102 lbs. (packed)

Peavey Penta Half-Stack Features:

• Penta tube guitar amp head
  
  140W RMS into 16, 8, or 4 ohms
• 4 matched EL34 tubes and 4 - 12AX7 tubes
• DC-powered preamp tube heaters
• Pentatone selects between 5 EQ/gain voicings
• Gain control
• 3-band passive EQ
• Master volume
• Presence control
• Ceramic tube sockets
• Custom USA transformers
• Ultrahigh-quality components
  
  Penta 412 cabinet
  
  Specially voiced for use with the Penta amp head
• 11-ply birch baffle
• 1/2" poplar sides
• 4 - 12" rear-mounted speakers
• Striking brown-weave grille cloth

Not one but 5 tube tones at a price that can't be beat-guaranteed!

The XXX Half-Stack includes the Peavey Triple XXX Guitar Amp Head and Triple XXX 412 4x12 Guitar Cabinet.

As hot as the name implies, the Peavey Triple XXX Guitar Amp Head rips. An amp not for the faint of heart, it comes loaded with practical features such as high-gain input and paralleled speaker outputs. Uses 3 - 12AX7 preamp tubes and 4 - 6L6GC power amp tubes. Power amp section can be converted to use 4 - EL34 tubes.

Delivers an earth-quaking 120W of pure tube power controlled by a master volume pot and independent volume knobs for each of its 3 channels. The Ultra and Crunch channels have gain controls to further assist in taming this beast while achieving killer sound. Tone contour is accomplished through passive controls for Bass, Mid, and Treble on the Clean channel, while the Ultra and Crunch channels use active Bottom, Body, and Hair (lo, mid, hi) controls.

Designed to work equally well into 4-, 8-, or 16-ohm loads, matching this monster to a cabinet is a pleasure, not a pain. Includes footswitchable channel and effects loop, damping switch (tight, medium, loose), and line out with level control. Footswitch included.

The Peavey Triple XXX 412 4x12 Guitar Cabinet is designed to match the Triple XXX head with emphasis on low end and cutting mids and highs. 400W handling, 1/2" poplar plywood construction, 11-ply birch baffle, 4x12" rear mount Triple XXX speakers, and striking silver/black grille cloth.

Peavey Triple XXX Half-Stack Specifications:

• Triple XXX Guitar Amp Head
  
  26-1/2"W x 11-1/4"H x 11"D
• 50-3/4 lbs.
  
  Triple XXX 412 4x12 Guitar Cabinet
  
  30"W x 29-3/8"H x 14"D
• 96 lbs.

Peavey Triple XXX Half-Stack Features:

• Triple XXX Guitar Amp Head
  
  120W tube power
• 3 footswitchable channels
• Clean channel: volume, passive 3-band EQ
• Crunch channel: gain, volume, active 3-band EQ
• Ultra channel: gain, volume, active 3-band EQ
• Master volume
• Footswitchable effects loop
• Damping switch: tight, medium, loose
• Line out with level control
• Footswitch included
  
  Triple XXX 412 4x12 Guitar Cabinet
  
  400W handling
• 4 - 12" speakers
• Low-end emphasis with cutting mids and highs
• 1/2" poplar plywood construction
• 11-ply birch baffle
• Rearmount
• Silver and black weave grille cloth

Ride a mile-high wave of sound straight to stardom. Order the XXX today.

The Peavey ValveKing half-stack guitar amplifier includes ValveKing 100 Head guitar amp and ValveKing 412 Cab.

At the heart of the all-tube Peavey ValveKing 100 Head is a patent-pending, Class A/B Texture control that allows variable selection and combination of Class A and Class AB power structures. This gives you the ability to coax a wide range of tones out of the ValveKing 100 Head. It features 12AX7 preamp and 6L6GC power amp tubes; 2 footswitchable channels with independent 3-band EQ and volume; footswitchable boost on the lead channel; global resonance, presence, and reverb controls; a buffered effects loop; and dual speaker jacks in parallel.

The perfect complement to the Peavey ValveKing 100 Head, the all-birch ValveKing Series 412 Cab features 4 - 12" ValveKing speakers, switchable mono/stereo operation, rear-mounted speakers, and 400W continuous power handling.

Peavey ValveKing Half-Stack Specifications:

• ValveKing 100 Head
  
  21-1/3"W x 18-1/4"H x 10-1/4"D
• 44-1/2 lbs.

Peavey ValveKing Half-Stack Features:

• ValveKing 100 Head
  
  100W all-tube power
• Texture variable Class A/B simulation control
• 2 footswitchable channels
• EQ and volume for each channel
• Footswitchable gain/volume boost on lead channel
• Reverb with level control
• Buffered effects loop
• Resonance and presence controls
• Dual speaker jacks in parallel
• 4 - 6L6GC power amp tubes
• 3 - 12AX7 preamp tubes
• 4, 8, or 16 ohms
  
  ValveKing 412 Cab
  
  Birch construction
• 16 ohms mono
• 4 - 12" ValveKing speakers
• Dual input jacks
• Rear-mounted speakers
• 400W continuous power handling

Read that features list and price tag and know this: it's a whole lotta amp for not a lotta cash. Order your Peavey ValveKing 100 Half Stack today.