The powers of the Trademark 60 4x10 Guitar Combo Amp are many. Experience how the soulful Tech 21 TM 60/410 combo amplifier can work its magic like a tonal Tiki god. This guitar amp is loaded with custom-designed Eminence® Speakers, 50 Watts/8 Ohms each, 8 Ohms Total Load.

Channel 1 offers a range of Fender® styles, from chiming clean to sizzling, saturated tweed' tone. The cunning Punch control sets the amount of midrange break-up and overdrive, and a Bite™ button tightens the low end and adds brightness. Things get much more raunchy over in Channel 2, with amp sounds ranging from crunchy Marshall®, to gnarly Vox® AC30, to slamming Mesa® Rectifier styles. A Weep™ button increases the amount of even harmonics and thickens the sound. The combo amp's powerful and sophisticated midrange control, appropriately named Growl™, can produce brutal scooped' tones without any loss of girth or volume.

Master section features active Low and High EQ controls, master Reverb and Boost. Midrange is individually controlled by Punch in Channel 1 and by Growl in Channel 2. Top-of-the-line, full-length Accutronics® 6-spring reverb. Boost function, for solos, increases the volume level up to 9dB without altering your tone. Unique Link button connects the Boost and Reverb functions to increase the size of your sound as well as the volume. Headphone output, which doubles as a 1/4" direct out. Multi-function footswitch (included) selects channels, activates the Reverb and Boost functions and engages the Effect Loop. Uses any standard 1/4" instrument or speaker cable.

Optional ARMD MIDI Converter controls footswitch functions of multi-channel Trademark and Landmark amplifier footswitch functions with any MIDI controller. Optional Black Vinyl Covers available.

Tech 21 Trademark TM 60/410 60W 4x10 Guitar Combo Amp Specifications:

• Input Impedance: 1MOhm
• Nominal Input Level*: -10dBu
• Optimum Output Load: 8 Ohms
• Power Output: 60W
• Effect Loop Input Impedance: 1MOhm
• Maximum Effect Loop Input*: approx. -6dBu
• Effect Loop Output Impedance: 1KOhm
• Nominal Effect Loop Output*: approx. -20dBu
• Nominal XLR Output*: approx. -20dBu
• Maximum Power Consumption: 120W
• AC Input Power (Factory Set): 110V, 117V, 230V, 240V
• Cycles: 50/60Hz
• Speaker (1x12) Celestion® Seventy80 Model #CT2112-16 12", 80W, 16 each 8 Total Load
• Speaker (4x10)
  
  Cabinet Dimensions (4x10): 22"l x 12"w x 22"h
• Weight: 46 lbs

Tech 21 Trademark TM 60/410 60W 4x10 Guitar Combo Amp Features:

• 2 channels
• 60 watts
• 4x10 Eminence® speakers, 50 Watts/8 Ohms each
• 8 Ohms total load
• Active Low/High EQ controls
• Master Reverb and Boost
• Separate Midrange controls for each channel
• Accutronics® 6-spring reverb
• 1/4" headphone/direct out
• Included footswitch

Tech 21 Trademark TM 60/410 60W 4x10 Guitar Combo Amp Includes:

• footswitch

Save BIG when you buy today!

A 2-channel bass amp head, the Tech 21 Landmark 300 is a 2-rackspace, 300W version of its predecessor, the Landmark 600. It too incorporates proprietary, 100% analog SansAmp Tube Amplifier Emulation technology. It offers a truckload of vintage and modern tube amp sounds, as well as a variety of overdriven tones. The interactive controls give you access to specific tone shaping characteristics to create your own custom sounds as well. Sample settings such as Bassman, SVT, Crimson, and King's X, are included in the owner's manual to get you started.

Tech 21 Landmark 300 300W Bass Head Specifications:

• 17"W x 16"D x 3.5"H, with an overall depth of 17-3/4".
• 21 lbs.

Tech 21 Landmark 300 300W Bass Head Features:

• 2 distinctively different channels
• Channel 1 is based on the famed SansAmp Bass Driver DI
• Channel 2 is based on the SansAmp Acoustic DI
• Channel 1 includes Drive, Presence, Level, active Bass and Treble, and blend controls
• Channel 2 includes Drive, Level, and active Bass and Treble controls, and a parametric EQ
• Parametric has sweep range of 170 Hz to 3.5 kHz, ± 16dB
• Channel switches manually or with standard latching footswitch
• Optional Tech 21 footswitch (#BFSWL) is available, which further expands the amp's capabilities
• 10dB gain boost to set up the preamp for different style pickups
• XLR Direct Output, switchable from -10dB to 0dB, enables you to go straight to mixer or recorder
• Effects loop
• Independent buffered tuner output provides a constant, unaffected signal
• 1/4" speaker outputs
• Forced-air cooled
• Included rackmount kit
  
  

Click or call now to score the best deal anywhere on the Landmark 300 - guaranteed!

The powers of the Tech 21 Trademark 60 amplifier are many. Experience how the soulful Trademark TM 60/212 Guitar Combo Amp can work its magic for you. Loaded with custom-designed Celestion® Seventy80 Speakers, this 60 W 2x12 combo delivers 80 Watts/16 Ohms each, 8 Ohms Total Load.

Channel 1 offers a range of Fender® styles, from chiming clean to sizzling, saturated tweed' tone. The cunning Punch control sets the amount of midrange break-up and overdrive, and a Bite™ button tightens the low end and adds brightness. Things get much more raunchy over in Channel 2, with amp sounds ranging from crunchy Marshall®, to gnarly Vox® AC30, to slamming Mesa® Rectifier styles. A Weep™ button increases the amount of even harmonics and thickens the sound. Its powerful and sophisticated midrange control, appropriately named Growl™, can produce brutal scooped' tones without any loss of girth or volume.

Master section features active Low and High EQ controls, master Reverb and Boost. Midrange is individually controlled by Punch in Channel 1 and by Growl in Channel 2. Top-of-the-line, full-length Accutronics® 6-spring reverb. Boost function, for solos, increases the volume level up to 9dB without altering your tone. Unique Link button connects the Boost and Reverb functions to increase the size of your sound as well as the volume. Headphone output, which doubles as a 1/4" direct out. Multi-function footswitch (included) selects channels, activates the Reverb and Boost functions and engages the Effect Loop. Uses any standard 1/4" instrument or speaker cable.

Optional ARMD MIDI Converter controls footswitch functions of multi-channel Trademark and Landmark amplifier footswitch functions with any MIDI controller. Optional Black Vinyl Covers available.

Tech 21 Trademark TM 60/212 60W 2x12 Guitar Combo Amp Specifications:

• Input Impedance: 1MOhm
• Nominal Input Level*: -10dBu
• Optimum Output Load: 8 Ohms
• Power Output: 60W
• Effect Loop Input Impedance: 1MOhm
• Maximum Effect Loop Input*: approx. -6dBu
• Effect Loop Output Impedance: 1KOhm
• Nominal Effect Loop Output*: approx. -20dBu
• Nominal XLR Output*: approx. -20dBu
• Maximum Power Consumption: 120W
• AC Input Power (Factory Set): 110V, 117V, 230V, 240V
• Cycles: 50/60Hz
• Speaker (2x12) Celestion® Seventy80 Model #CT2112-16 12", 80W, 16 each 8 Total Load
• Speaker (4x10)
  
  Cabinet Dimensions (2x12): 26"l x 12"w x 19"h
• Weight: 2x12: 42 lbs

Tech 21 Trademark TM 60/212 60W 2x12 Guitar Combo Amp Features:

• 2 channels
• 60 watts
• 2x12 Celestion® Seventy80 speakers, 80 Watts/16 Ohms each
• 8 Ohms total load
• Active Low/High EQ controls
• Master Reverb and Boost
• Separate Midrange controls for each channel
• Accutronics® 6-spring reverb
• 1/4" headphone/direct out
• Included footswitch

Tech 21 Trademark TM 60/212 60W 2x12 Guitar Combo Amp Includes:

• footswitch

Don't take our word for it. Order today with the protection of our 45-day lowest price and total satisfaction guarantees!

8-ohm bass speaker cabinet handles 400W without even breathing hard. 4 cast-frame, custom-designed 10" speakers pump out chunky, tight bass tones. Chromeplated steel grille and rear-vented sturdy construction can handle whatever the road dishes out. Speakon and 1/4" jacks. 24"W x 24"H x 16"D. 70 lbs.y

Tech 21 B410 Cabinet Features:

• 8-ohm bass speaker cabinet
• Handles 400W
• 4 cast-frame, custom-designed 10" speakers
• Chromeplated steel grille
• Rear vented
• Sturdy construction
• Speakon and 1/4" jacks

Don't waste any more time. Go for the sound you've been after today!

The 2-channel, 60W Tech 21 Trademark 60 Combo gives you the flexibility to create your own mind-blowing tones. You can go from vintage to modern with 2 versatile channels and boost function expands these 2 channels to give you 4 footswitchable sound options. Also features a master section with low, high, reverb, and boost controls; low and high EQ; 12" speaker; built-in direct box for going straight into a mixer or recording gear, or tapping directly into PA monitors; footswitchable effects loop; headphone output; and more. Plus, it's lightweight for easy transport and heavy duty for total reliability.

Tech 21 Trademark 60 Combo Amp Specifications:

• 20"W x 17"H x 11"D
• 36 lb.

Tech 21 Trademark 60 Combo Amp Features:

• 2 channels and boost function for 4 footswitchable tones
• Master section with low, high, reverb, and boost controls
• Low and high EQ
• Built-in direct box
• Footswitchable effects loop
• Headphone output

This is a hot amp, great for gigs and the studio.

The Tech 21 Power Engine 60 is an all-purpose, multi-function, powered extension cabinet. It can be used with any direct recording device or pre-amp, analog or digital, tube or solid state, in stompbox or rackmount formats. When plugging your favorite device into a Power Engine, the tone is unaffected. So there's no need to labor over readjusting all your parameters that would otherwise be colored by a conventional amplifier.

These handsome cabinets perfectly complement the Tech 21 line of Trademark combo amps. The Power Engine 60 will accept XLR and 1/4" inputs and includes a balanced XLR output to daisy-chain' with other Power Engine 60s. Knowing that not all rooms are created acoustically perfect, you can compensate for less than ideal environments by adjusting the on-board, active three-band EQ.

With ground-independent inputs and output, there's no limit to how much power you can have. You can chain hundreds of Power Engine 60s together to make a giant wall of power (although some might view that as excessive).

Power Engines can also facilitate stereo configurations - with a traditional amp or with a pre-amp and stereo processor.

Tech 21 Power Engine PE 60/410 60W 4x10 Powered Extension Speaker Cabinet Specifications:

• Input Impedance: 10kOhms
• Nominal Input Level: -20dBm to +4dBm
• Optimal Output Load: 8 Ohms
• Power Output: 60W
• Maximum Power Consumption: 120W
• AC Input Power (factory set): 100V, 117V, 230V, 240V
• Cycles: 50/60 Hz
• Speaker: Eminence® Model #ET-2110-8, 10", 50W, 8 each,
• 8 Total Load
• Cabinet Dimensions: 22"l x 12"w x 22"h
• Weight: 43 lbs
  
  Note: With on-going product development and improvements, specifications and/or the cosmetic appearance of this unit may change without prior notice. Replacement parts are available, i.e., knobs, logo plate, handles, etc.

Tech 21 Power Engine PE 60/410 60W 4x10 Powered Extension Speaker Cabinet Features:

• 4x10 - Loaded with custom-designed
• Eminence® Speakers
• 50 Watts/8 Ohms each
• 8 Ohms Total Load

An incredible tool for re-amping, adding life and room tone to direct-recorded tracks, or use with Tech 21's studio standard Sans Amp or other modelers.

The Tech 21 Power Engine PE-400 400W Stereo Power Amp produces 200 watts per side at 8 Ohms. Heavy duty modules will fit in a 2U rack space. The oversized power supply with a toroidal transformer delivers pneumatic punch with a natural transient response, while the tone is pure and uncolored. Super-reliable with top-quality Toshiba power transistors and a heat-sensor equipped cooling fan.

Tech 21 Power Engine PE-400 400W Stereo Power Amp Specifications:

• XLR Input Impedance: 3.3KOhm
• 1/4" Input Impedance: 10KOhm
• Nominal Input Level: -10dBm
• Optimal Output Load: 8 Ohms per side
• RMS Continuous Power Output: 200W RMS @ 8 min/side, 150W RMS @ 16
• XLR Output Level: same as input
• AC Input Power (factory set): 100V, 117V, 230V, 240V
• Cycles: 50/60 Hz
• Unit Dimensions: 17"w x 3.5"h x 10"d
• Overall (with ears, feet and handles): 19"w x 3.8125"h x 11.5"d
• Weight: 26.25 lbs
  
  NOTE: Each unit constructed for specific voltages. AC power cannot be switched.
  
  Note: With on-going product development and improvements, specifications and/or the cosmetic appearance of these units may change without prior notice. Replacement parts are available, i.e., knobs, logo plate, handles, etc.

Tech 21 Power Engine PE-400 400W Stereo Power Amp Features:

• Front panel level control(s) with LED indicators for Signal and Clip.
• XLR and 1/4" inputs
• XLR output(s) with Ground Lift
• Parallel Speaker Outputs
• Reliable and versatile for any sound reinforcement application

Power up! Call or click today to order.

A dual-channel, 60W acoustic combo, the Bronzewood 60 offers high-end, professional-quality sound without a big price tag or heavy mass. 100% analog, SansAmp Tube/Microphone Emulation circuitry removes the harsh harmonics associated with piezo pickups and delivers the natural warmth and presence for which Tech 21 is known. Covered in brown crocodile-embossed vinyl complemented by a custom black grille and decorative brown piping. From studio to stage and from cafe to coliseum, it delivers exceptional sound quality in a cost-effective package.

Tech 21 Bronzewood 60 Acoustic Combo Specifications:

• 20"W x 17"H x 11"D
• 38 lbs.

Tech 21 Bronzewood 60 Acoustic Combo Features:

• Guitar Channel:
• Compressor, ranging from 1:1 to 5:1
• Phase switch
• Pre-amp control
• Notch filter
• Mid Shift and Mid are sweepable, semi-parametric EQ controls and range from 70Hz to 3kHz, ±16dB, respectively
• Active tone controls, boost or cut ±12dB
• Unique Blend control enables you to determine the ratio of direct instrument signal and SansAmp Tube/Microphone Emulation circuitry
• Full-length, 3-spring Accutronics reverb
  
  Mic Channel:
• XLR mic level female input
• 24V phantom switch to power a condenser microphone (or any other phantom powerable product, including a SansAmp Acoustic DI)
• 3-band active EQ controls
• Reverb Mix to control the balance of reverb between the Guitar and Mic channels
• Other Features:
• Special design 12" speaker
• Special design high-frequency horn
• SansAmp XLR Direct Out for stage and studio applications allows you to go direct to any mixing console
• Headphone output, which can also be used as a 1/4" direct out
• Effect loop
• Footswitch jack that accepts any alternating footswitch to control the reverb function

Very cool looking and sounding amp, and it's loaded with control features. Order today.

The Tech 21 Power Engine PE-400 400W Stereo Power Amp produces 200 watts per side at 8 Ohms. Heavy duty modules will fit in a 2U rack space. The oversized power supply with a toroidal transformer delivers pneumatic punch with a natural transient response, while the tone is pure and uncolored. Super-reliable with top-quality Toshiba power transistors and a heat-sensor equipped cooling fan.

Tech 21 Power Engine PE-400 400W Stereo Power Amp - Scratch 'n' Dent Specifications:

• XLR Input Impedance: 3.3KOhm
• 1/4" Input Impedance: 10KOhm
• Nominal Input Level: -10dBm
• Optimal Output Load: 8 Ohms per side
• RMS Continuous Power Output: 200W RMS @ 8 min/side, 150W RMS @ 16
• XLR Output Level: same as input
• AC Input Power (factory set): 100V, 117V, 230V, 240V
• Cycles: 50/60 Hz
• Unit Dimensions: 17"w x 3.5"h x 10"d
• Overall (with ears, feet and handles): 19"w x 3.8125"h x 11.5"d
• Weight: 26.25 lbs
  
  NOTE: Each unit constructed for specific voltages. AC power cannot be switched.
  
  Note: With on-going product development and improvements, specifications and/or the cosmetic appearance of these units may change without prior notice. Replacement parts are available, i.e., knobs, logo plate, handles, etc.

Tech 21 Power Engine PE-400 400W Stereo Power Amp - Scratch 'n' Dent Features:

• Front panel level control(s) with LED indicators for Signal and Clip.
• XLR and 1/4" inputs
• XLR output(s) with Ground Lift
• Parallel Speaker Outputs
• Reliable and versatile for any sound reinforcement application

Power up! Call or click today to order.

The Tech 21 Power Engine 60 is an all-purpose, multi-function, powered extension speaker cabinet. It can be used with any direct recording device or pre-amp, analog or digital, tube or solid state, in stompbox or rackmount formats. When plugging your favorite device into a Power Engine, the tone is unaffected. So there's no need to labor over readjusting all your parameters that would otherwise be colored by a conventional amplifier.

These handsome cabinets perfectly complement the Tech 21 line of Trademark combo amps. The Power Engine 60 will accept XLR and 1/4" inputs and includes a balanced XLR output to daisy-chain' with other Power Engine 60s. Knowing that not all rooms are created acoustically perfect, you can compensate for less than ideal environments by adjusting the on-board, active three-band EQ.

With ground-independent inputs and output, there's no limit to how much power you can have. You can chain hundreds of Power Engine 60s together to make a giant wall of power (although some might view that as excessive).

Power Engines can also facilitate stereo configurations - with a traditional amp or with a pre-amp and stereo processor.

Tech 21 Power Engine PE 60/212 60W 2x12 Powered Extension Speaker Cabinet Specifications:

• Input Impedance: 10kOhms
• Nominal Input Level: -20dBm to +4dBm
• Optimal Output Load: 8 Ohms
• Power Output: 60W
• Maximum Power Consumption: 120W
• AC Input Power (factory set): 100V, 117V, 230V, 240V
• Cycles: 50/60 Hz
• Speaker: Celestion® Seventy 80 Model #CT2112-16 12", 80W,
• 16 each 8 Total Load
• Cabinet Dimensions: 26"l x 12"w x 19"h
• Weight: 39 lbs
  
  Note: With on-going product development and improvements, specifications and/or the cosmetic appearance of this unit may change without prior notice. Replacement parts are available, i.e., knobs, logo plate, handles, etc.

Tech 21 Power Engine PE 60/212 60W 2x12 Powered Extension Speaker Cabinet Features:

• 2x12 - Loaded with Celestion® Seventy80 Speakers
• 80 Watts/16 Ohms each
• 8 Ohms Total Load

An incredible tool for re-amping, adding life and room tone to direct-recorded tracks, or use with Tech 21's studio-standard Sans Amp or other modelers.

The Tech 21 Power Engine PE-300 instrument power amplifier takes the Power Engine capabilities to large-venue capacity. The mono Power Engine 300 produces 300 watts at 4 Ohms. This heavy-duty module will fit in a 2U rack space. The oversized power supply with a toroidal transformer delivers pneumatic punch with a natural transient response, while the tone is pure and uncolored. Super-reliable with top-quality Toshiba power transistors and a heat-sensor equipped cooling fan.

Tech 21 Power Engine PE-300 300W Mono Power Amp Specifications:

• XLR Input Impedance: 3.3KOhm
• 1/4" Input Impedance: 10KOhm
• Nominal Input Level: -10dBm
• Optimal Output Load: 4 Ohms
• RMS Continuous Power Output: 300W RMS @ 4 min load, 200W RMS @ 8 , 150W RMS @ 16
• XLR Output Level: same as input
• AC Input Power (factory set): 100V, 117V, 230V, 240V
• Cycles: 50/60 Hz
• Unit Dimensions: 17"w x 3.5"h x 10"d
  
  Overall (with ears, feet and handles): 19"w x 3.8125"h x 11.5"d
  
  Weight: 22.3 lbs.
  
  NOTE: Each unit constructed for specific voltages. AC power cannot be switched.
• Note: With on-going product development and improvements, specifications and/or the cosmetic appearance of these units may change without prior notice. Replacement parts are available, i.e., knobs, logo plate, handles, etc.

Tech 21 Power Engine PE-300 300W Mono Power Amp Features:

• Front panel level control(s) with LED indicators for Signal and Clip.
• XLR and 1/4" inputs
• XLR output(s) with Ground Lift
• Parallel Speaker Outputs

Power up! Call or click today to order.

The Tech 21 Power Engine 60 is an all-purpose, multi-function, powered extension speaker cabinet. It can be used with any direct recording device or pre-amp, analog or digital, tube or solid state, in stompbox or rackmount formats. When plugging your favorite device into a Power Engine, the tone is unaffected. So there's no need to labor over readjusting all your parameters that would otherwise be colored by a conventional amplifier.

These handsome cabinets perfectly complement the Tech 21 line of Trademark combo amps. The Power Engine 60 will accept XLR and 1/4" inputs and includes a balanced XLR output to daisy-chain' with other Power Engine 60s. Knowing that not all rooms are created acoustically perfect, you can compensate for less than ideal environments by adjusting the on-board, active three-band EQ.

With ground-independent inputs and output, there's no limit to how much power you can have. You can chain hundreds of Power Engine 60s together to make a giant wall of power (although some might view that as excessive).

Power Engines can also facilitate stereo configurations - with a traditional amp or with a pre-amp and stereo processor.

Tech 21 Power Engine PE 60/212 60W 2x12 Powered Extension Speaker Cabinet - Scratch 'n' Dent Specifications:

• Input Impedance: 10kOhms
• Nominal Input Level: -20dBm to +4dBm
• Optimal Output Load: 8 Ohms
• Power Output: 60W
• Maximum Power Consumption: 120W
• AC Input Power (factory set): 100V, 117V, 230V, 240V
• Cycles: 50/60 Hz
• Speaker: Celestion® Seventy 80 Model #CT2112-16 12", 80W,
• 16 each 8 Total Load
• Cabinet Dimensions: 26"l x 12"w x 19"h
• Weight: 39 lbs
  
  Note: With on-going product development and improvements, specifications and/or the cosmetic appearance of this unit may change without prior notice. Replacement parts are available, i.e., knobs, logo plate, handles, etc.

Tech 21 Power Engine PE 60/212 60W 2x12 Powered Extension Speaker Cabinet - Scratch 'n' Dent Features:

• 2x12 - Loaded with Celestion® Seventy80 Speakers
• 80 Watts/16 Ohms each
• 8 Ohms Total Load

An incredible tool for re-amping, adding life and room tone to direct-recorded tracks, or use with Tech 21's studio-standard Sans Amp or other modelers.

The Tech 21 Power Engine 60 is an open-backed 1x12, 60W powered extension cab designed to be used with the Trademark 60. It is not a standalone piece; however, it can be combined with any discrete bass preamp. You don't have to tweak your usual settings or presets. Just plug into the Power Engine and go. It has a level control, 3-band active tone control, 1/4" input, and balanced XLR input and output. You can daisy-chain any number of Power Engine 60s together for the really big gigs.

Tech 21 Power Engine 60 Features:

• 12" speaker
• 60W of power
• Open-backed cab design
• Level control and three-band active tone
• Use as an extension for the Trademark and Bronzewood 60s
• Use as a standalone fronted by any direct-recording device or preamp
• Daisy-chain multiple Power Engines together for added power

Put the Power Engine to work in your gig rig today. Just click or call to order.

The Tech 21 Sansamp RBI Rackmount Bass Tube Amp Emulator puts all of the preamp tone-shaping and fattening control of the popular SansAmp Bass Driver DI in a single rackspace and adds a host of new features: a dedicated mid control; individual level control for the XLR out to optimize your amp's output relative to the PA; effects loop; Mix 50/50 switch; 2 XLR outputs, one with level selection and a buffered unaffected XLR for running a dry signal to another channel. It also has 2 footswitch inputs: on/off and an output for chaining and toggling between 2 SansAmps.

Tech 21 SansAmp RBI Rackmount Bass Tube Amp Emulator Features:

• Puts all of its predecessor's preamp tone-shaping and fattening control in a single rackspace
• Dedicated mid control
• Individual level control for the XLR out to optimize your amp's output relative to the PA
• An effects loop
• Mix 50/50 switch
• 2 XLR outputs, one with level selection and a buffered unaffected XLR for running a dry signal to another channel
• 2 footswitch inputs: on/off and an output for chaining and toggling between 2 SansAmps

One piece of gear that can make your old amp sound like a million bucks. Buy it today.

The Trademark 30 single-channel 1x10 guitar amp features a modified version of the super flexible SansAmp GT2 pedal design at its heart. Construct your tone by selecting amp character, gain structure, and speaker type, and then use the drive controls and active 3-band EQ to nail your sound. The 30W output is plenty loud for practice and monitoring and the balanced XLR and 1/4" outputs bring the big tones of this little combo to the studio mixer or PA system.

Tech 21 Trademark 30 30W Guitar Combo/DI Amplifer Specifications:

• Model Number: TM30
• Input Impedance: 1MOhm
• Nominal Input Level: -10dBu
• Optimum Output Load: 4 Ohms
• Power Output: 30W
• Effect Loop Input Impedance: 1MOhm
• Maximum Effect Loop Input: approx. -6dBu
• Effect Loop Output Impedance: 1KOhm
• Nominal Effect Loop Output: approx. -20dBu
• Nominal XLR Output: approx. -20dBu
• Maximum Power Consumption: 60W
• AC Input Power (Factory Set): 110V, 117V, 230V, 240V
• Cycles: 50/60Hz
• Speaker: Special Design Model #2110-T 10", 50W, 4 Ohms
• Cabinet Dimensions: 14.5"l x 8"w x 13.25"h
• Weight: 14 lbs.

Tech 21 Trademark 30 30W Guitar Combo/DI Amplifer Features:

• Character section to construct a custom tone in seconds
• Professional quality Accutronics 3-spring reverb
• 3-band, active tone controls, boost or cut 12dB
• Effect loop
• Headphone output doubles as a 1/4" direct out
• Speaker extension output
• XLR direct output
• Weighs just over 14 lbs.

In the bedroom, rehearsal, studio, or club, the Trademark 30 is a giant among compact combos. Order today!

The Tech 21 Power Engine 60 is an open-backed 1x12, 60W powered extension cab designed to be used with the Trademark 60. It is not a standalone piece; however, it can be combined with any discrete bass preamp. You don't have to tweak your usual settings or presets. Just plug into the Power Engine and go. It has a level control, 3-band active tone control, 1/4" input, and balanced XLR input and output. You can daisy-chain any number of Power Engine 60s together for the really big gigs.

Tech 21 Power Engine 60 - Scratch 'n' Dent Features:

• 12" speaker
• 60W of power
• Open-backed cab design
• Level control and three-band active tone
• Use as an extension for the Trademark and Bronzewood 60s
• Use as a standalone fronted by any direct-recording device or preamp
• Daisy-chain multiple Power Engines together for added power

Put the Power Engine to work in your gig rig today. Just click or call to order.

The Tech 21 SansAmp GT2 Tube Amp Emulator costs less than the original Sans Amp, and it's easier to set up. So they compromised on sound quality, right? Not as far as we can tell! GT2 purrs and screams with the same kind of fat, warm, glowing-glass sounds heard in the original, but cost-effective manufacturing brought the price down. You select amp type, modification, and mic placement. Find the tone you want using high and low EQ, set your level, dial up distortion with the drive knob, then hit the "on" switch. The Tech 21 SansAmp GT2 is a truckload of tube amps in just one pedal!

Save BIG when you buy today!

Soft black vinyl with silver embroidered logo. Fits Power Engine 60, Power Engine 60T.

Keep your VC112-ST Power Engine 60 free from scratches and dents. Put it in the cart.