The ENGL Invader 100 E 642 Tube Guitar Amp Head features 8 different gain stages in 4 separate channels that include four separate EQs. Powered by 4 EL 34 Tubes the Invader delivers a total amount of 100 watts. The idea behind the Invader is that guitarists need ultimate flexibility and control in any given playing situation. It achieves this by using a special 4 channel layout.

Named Channel 1, 2, 3, 4, these channels are able to produce different Overdrive / Gain structures in each one from Crunch to High Gain. Every Overdrive Voicing in the channels is different. In conjunction with the Hi / Lo gain switch, which can be remote controlled and a separate EQ section for each channel, there will be no limits except the guitarist creativity.

• Channel 1: Silken Clean to Crispy Crunch
• Channel 2: Fat & Bulky Crunch to NU-Rock / Metal Rhythm / Lead
• Channel 3: Tight Warm Crunch to Classic Dynamic Rock / Metal
• Channel 4: Modern Crunch to Singing Harmonic Leads


There are three different remote interface ports available on the ENGL Invader amp head: A Serial Amp Control Port accepts the Custom Z-9 Footswitch (optional); use it as a conventional switcher to select channels and two sound-shaping functions directly. Then there's the MIDI In, which accepts the Z-9 for use as a simple MIDI footcontroller or any other MIDI footcontroller. Finally, the guitar amp is equipped with a stereo jack that takes a dual footswitch, allowing you to switch the four channels remotely.

Engl Invader 100 E 642 Tube Guitar Amp Head Specifications:

• Preamp:
• 4 channels. four 3-stage EQs incl. logarithmic treble curve, Bright switch for Channels 1 and 2, separate Gain and Volume controls for each channel, Hi / Lo Gain switch, Noise Gate with threshold adjust, 2 parallel FX loops, 4 x ECC 83 / 12 AX 7 preamp tubes. Tuner out activated via standby switch.
  
  Master Section: 100 watts (4 EL 34 tubes), Master A / B switch, Presence and Depth Punch control for poweramp soundshaping, Electronic Tube Protection circuit and powertube monitoring system.
  
  Outputs: MIDI IN / THRU, jack for ENGL Z-9 footswitch, jack for ENGL Z-4 / Z-3 footswitch, 2 x FX Send, 2 x FX Return, 2 x FX Balance, preamp out / tuner, line out / power amp, speaker outs 2 x 4, 2 x 8, 1 x 16 ohms
  
  MIDI programmable functions at a glance, storable in any combination as required: Channel switching, Master A / B, Bright, Hi / Lo Gain, FX Loop 1 and 2, noise gate, amp mute (tuner)
  
  Dimensions (l x h x d): 27.95 x 10.62 x 11.41 , (71 x 27 x 29 cm)
• Weight: 46.29 lbs., (21 kg)

Engl Invader 100 E 642 Tube Guitar Amp Head Features:

• Four Basic Channels with separate Gain and Volume knobs
• Two Gain Variants for each channel
• Four Voicing Sections - 3-band EQ for each channel
• Bright sound-shaping Button for Channel 1 & 2
• Two Effects Loops that are variable and switchable
• A and B Master knobs are accessible via MIDI
• MIDI Ins and Thru ports
• 128 MIDI Presets via 16 Channels
• Three different remote interface ports
• Programmable Noise Gate in Channel 2, 3, and 4

Get one of the best tools of the trade today!