Classic design and crisp, boutique tone.

In keeping with its classic design, the Artisan 30H is deceptively simple in operation and yet highly flexible in functionality and tone.

With the emphasis on simplicity and sonic purity, every feature of the Artisan 30H has been refined to provide the artist with the widest range of reference vintage tones. This is achieved by the design of electronic circuitry that works in harmony with the finest components and materials available.

The Artisan 30H is built to last a lifetime and effortlessly combines vintage style and rugged, road tested reliability. The point-to-point tag board construction, welded steel chassis and finger-jointed birch-ply cabinet are complemented by beautiful vintage red Tolex and etched aluminium panels.

Power Amplifier

The Artisan 30H power amplifier uses four EL84 power pentode tubes in Class A bias. The EL84s used are graded in terms of quiescent operating point and transconductance giving excellent hum performance and dynamic feel.

The Artisan 30H power amplifier operates in two modes, namely push-pull (30W) or single-ended (10W), depending on the setting of the power amplifier mode control. This control is designed to maintain the optimum operating point in both single-ended and push-pull modes to ensure maximum performance.

In push-pull mode the power amplifier takes on characteristics similar to that of a Class A early '60s British amplifier. The single-ended mode allows the generation of the critical power amplifier harmonic distortion at a much lower volume. The lower power setting is particularly effective for home and studio use.

A cathode-coupled phase splitter enhances the power amplifier and provides balance in the power amplifier drive as well as superb dynamic response. In keeping with the vintage sonic signature of the Artisan 30H, the use of a tube rectifier adds compression to the power amplifier response and is critical in generating its feel and responsiveness. The GZ34 tube rectifier used in the Artisan 30H is also found in other classic designs.

With an amplifier that is built to last, reliability of the electronics circuitry is essential.

Preamplier

Channel 1 – The ECC83 Channel

Hi/Lo inputs provide perfect matching either directly to the guitar (high sensitivity) or for connection to higher output effects pedals (low sensitivity).

This channel is based on the EF86 preamplifier pentode tube. Originally, this tube was most commonly used in high-end audio applications due to its high gain and low noise characteristics. However, in very early American guitar amplifier designs a pentode was used in the preamplifier circuit. The use of a pentode in these early designs provided unique gain and compression characteristics that make these amplifiers so revered for studio use today.

The extra gain of the EF86 allows the power amplifier to be driven harder for more compression and rich harmonic distortion. The EF86 also adds its own particular compression and distortion flavor to this channel making Channel 1 ideal for recording.

The 5-position Bass Shape switch controls the bass drive into the power amplifier and enables the user to quickly and easily select from a wide palette of tonal options from bright and glassy through to fat and smooth.

Channel 2 – The EF86 Channel

Hi/Lo inputs provide perfect matching either directly to the guitar (high sensitivity) or for connection to higher output effects pedals (low sensitivity).

This channel's tone is most easily described as a blend between a boutique EL84 combo and classic British 100W head. The philosophy is to deliver the bell-like ring and richness of a warm, retro combo with the added openness and roar of a vintage high-wattage head.

The flexibility of this channel is further enhanced by the addition of the 2-position Voice switch that completely reconfigures the tone-shaping network to give either a warm or bright response.

Blackstar Artisan 30 A30H 30W Guitar Amp Head Specifications:

• Power (RMS): 30 Watts or 10 Watts (switchable)
• Tubes: 1 x GZ34, 4 x EL84, 3 x ECC83, 1 x EF86
• Weight (lbs.): 38.14
• Dimensions (inches): 28.15 x 11.38 x 8.21

Save BIG when you buy today!

Hand-crafted tone.

The Blackstar Artisan 100 guitar amp takes the boutique 100W design to a whole new level of flexibility. The Voice control is a timeline that chronicles the evolution of the genre from the earliest American designs through to British designs of the '60s and '70s. This is achieved by switching the preamplifier voicing and power amplifier damping simultaneously.

The Artisan 100 and other amp heads from the Artisan Series are hand wired amplifiers representing the absolute highest standard of craftsmanship and boutique tone. With the emphasis on simplicity and sonic purity, every feature on these guitar amps has been refined to provide the artist with the widest range of reference vintage tones. Point-to-point tag board construction, welded steel chassis' and finger jointed birch-ply cabinets are complemented by beautiful vintage red Tolex and etched aluminum panels.

Blackstar Artisan Series 100 100W Tube Amp Head Specifications:

• Mode 1: Early USA, High Damping/Lo Gain, Bright and clean
• Mode 2: Twin USA, High Damping/Lo Gain, Bright and clean
• Mode 3: Early UK, Med Damping/Med Gain, More power amp gain; crunchy
• Mode 4: Late UK, Lo Damping/Hi Gain, More power amp gain; crunchy

Blackstar Artisan Series 100 100W Tube Amp Head Features:

• 100W head
• 4 x EL34 output tubes
• 4-way Voice switch charts the timeline of 100W designs
• Hi and Lo inputs perfect for channel blending
• Impedance selector.

You know it's going to sound killer. Why wait? Order today.

Hand crafted tone.

The ARTISAN 15 Guitar Amp – beautiful looks and beautiful tone. Two channels, one based on an EF86 Pentode and the other an ECC83 Triode, touch base on a multitude of legendary vintage and boutique reference tones. The EL84 based power section is switchable between 5W single ended Class A and a more dynamic push-pull 15W Class A configuration, for the ultimate in low power tube amplifier flexibility.

Blackstar's Artisan Series of hand wired amplifiers represents the absolute highest standard of craftsmanship and boutique tone. With the emphasis on simplicity and sonic purity, every feature has been refined to provide the musician with the widest range of reference vintage tones. The Artisan 15 guitar amp has point-to-point tag board construction, welded steel chassis and finger jointed birch-ply cabinets that are complemented by beautiful vintage red Tolex and etched aluminum panels.

Blackstar Artisan Series 15 15W 1x12 Tube Guitar Combo Amp Specifications:

• Mode 1: Channel 1, push-pull, ECC83/15W
• Mode 2: Channel 2, single-ended, EF86/5W
• Mode 3: Channel 1, single-ended, ECC83/5W
• Mode 4: Channel 2, push-pull, EF86/15W
• Mode 5: Channel 1/Channel 2, push-pull, blended EF86/ECC83 15W
• Mode 6: Channel 1/Channel 2, single-ended, blended EF86/ECC83 5W

Blackstar Artisan Series 15 15W 1x12 Tube Guitar Combo Amp Features:

• Class A 15W combo
• Switch for 5W single-ended / 15W push-pull operation
• 2 x EL84 output tubes
• EF86 channel
• ECC83 channel
• Hi and Lo inputs perfect for channel blending
• Impedance selector
• Vintage G12M Celestion speaker.

You know it's going to sound killer. Why wait? Order today.

Hand crafted tone.

There is something undoubtedly magical in the sonic qualities of the 30W EL84 power stage driving a pair of classic British speakers. The Blackstar Artisan 30 guitar amp takes the tone and carefully distills it, taking it to a new level of tonal purity. One channel is built around an EF86 with a 5-way Bass Shape switch and the other an ECC83 with the addition of a Voice control for extra tonal flexibility. The Master Volume delivers the pure, natural crunch that you would expect from an amp of this quality.

The Artisan Series of hand wired amplifiers represents the absolute highest standard of craftsmanship and boutique tone. With the emphasis on simplicity and sonic purity, every feature on these guitar amplifiers has been refined to provide the musician with the widest range of reference vintage tones. Point-to-point tag board construction, welded steel chassis and finger jointed birch-ply cabinets are complemented by beautiful vintage red Tolex and etched aluminum panels.

Blackstar Artisan Series 30 30W 2x12 Tube Guitar Combo Amp Specifications:

• Mode 1: Channel 1, push-pull, EF86/30W
• Mode 2: Channel 2, single-ended, ECC83/10W
• Mode 3: Channel 1, single-ended, EF86/10W
• Mode 4: Channel 2, push-pull, ECC83/30W
• Mode 5: Channel 1/Channel 2, push-pull, blended 30W
• Mode 6: Channel 1/Channel 2, single-ended, blended 10W

Blackstar Artisan Series 30 30W 2x12 Tube Guitar Combo Amp Features:

• Class A 30W combo
• Switch for 10W single-ended / 30W push-pull
• 4 x EL84 output tubes
• EF86 channel with 5-way Bass Shape switch
• CC83 channel with 2-way Voice switch and Master Volume
• Hi and Lo inputs perfect for channel blending
• Impedance selector
• 2 x Celestion Vintage 30 speakers.

You know it's going to sound killer. Why wait? Order today.

Simple in design, sophisticated sound quality!

Elegance and simplicity are the driving forces behind Blue's design philosophy, and the ROBBIE tube premap is no exception. This Class-A discrete tube microphone and instrument preamp features the same technical build quality and commitment to excellence for which Blue is known. Yields excellent detail with extremely low noise and ultrahigh gain. The warm, robust tube gain stage is the perfect enhancement for condenser microphones. Frequency response is 10Hz to 100kHz, ±2dB.

Blue ROBBIE Tube Microphone Preamp Specifications:

• Gain Range: 8dB to 68dB
• Maximum Output Level: +34dBu, 20Hz to 40kHz @ 10 kOhm
• Frequency response: 10Hz to 100KHz, +/- 2dB
• Noise: -131dB EIN @ 60dB gain (10Hz to 30kHz, 50 Ohm source)
• Dimensions: 8-1/2"W x 8-1/4"D x 5-1/4"H
• External Power Supply
• One Year Warranty

Blue ROBBIE Tube Microphone Preamp Features:

• Class-A single-channel discrete tube microphone and instrument preamplifier
• Discrete, balanced components from input to output
• Simple design
• Front panel features a large backlit gain knob and Hi-Z 1/4" instrument input
• Inputs: one XLR microphone, one 1/4" TS phone instrument
• Output: one XLR line
• Phantom power

Step up to the excellence of Robbie! Order now.

Alchemist spins the visions of discerning guitarists into gold.

The Bogner Alchemist 112 combo amp is a modern take on vintage tube amp design. Boasting sparkling, articulate cleans, touch-sensitive leads and a bright and colorful crunch, the Alchemist 112 guitar amp owes its remarkable tonality to a 6L6 class-AB power section, a five-12AX7 preamp and a premium Celestion speaker. The Bogner Alchemist 112 amp owes its timeless appeal to classic innovation, modern ingenuity and some entrancing sonic alchemy.

The Bogner Alchemist 112 has a 2-channel design. Each channel has its own voice and identity. Beginning clean and fast, featuring an open top-end and tight bottom-end, Channel 1 opens gradually to present simmering blues tones that churn like spirits in a cauldron. Advancing toward saturation, Crunch mode turns up the heat adding the perfect touch of nastiness with added pick response and increased tonal complexity. Channel 2, achieving critical mass, invokes the famous white-hot Bogner gain—creamy, modern and screaming with sustain—offering everything from Brit rock right through to modern metal. Plus, with variable Bright settings, each channel can be customized to match the tone of your guitar and rig.

Featuring a selectable power section, from 40 to 20 watts, the Alchemist 112 amp's sonority quickly transforms to display a very different kind of magic. When switched to 20 watts, the Bogner Alchemist 112 amp undergoes a complete sonic metamorphosis, changing its harmonic complexity and feel to conjure the essence of the legendary Brown sound.

Reverb and Delay, in variable styles and levels, run in parallel, separate from the original signal. The result is a rich, living and breathing, fully realized resonance capable of producing a complete tonal landscape.

Bogner includes a 4-button footswitch with the Alchemist 112 combo tube amp.

Bogner Alchemist Series 112 40W 1x12 Tube Guitar Combo Amp Features:

• 6L6 class-AB power section and five-12AX7 preamp; selectable power section (40 or 20 watts)
• One 12" premium Celestion speaker
• Channel 1 (gold): Gain, Treble, Mid, Bass, Volume, Crunch mode, variable Bright, Deep switch; Channel 2 (mercury): Gain, Treble, Mid, Bass, Volume, variable Bright, Mid Shift; Shared: in parallel, Reverb Type, Reverb Level, Delay Type, Delay Level, Delay Repeats (Feedback), Tap Tempo
• Included four-button footswitch controls Channel Select, Boost, Delay and Reverb
• Eye-catching retro-modern fit-and-finish

Get the right chemistry on stage. Call or click now to order.

Alchemist spins the visions of discerning guitarists into gold.

The Bogner Alchemist Series 212 is a guitar combo amp that boasts sparkling, articulate cleans; touch-sensitive leads; and a bright and colorful crunch. Alchemist is a modern take on vintage tube amp design. The Alchemist 212 amp owes its remarkable tonality to a 6L6 class-AB power section, a five-12AX7 preamp and premium Celestion speakers. It owes its timeless appeal, though, to classic innovation, modern ingenuity and the entrancing ancient mysticism of alchemy.

The Bogner Alchemist has a 2-channel design, each channel with its own voice and identity. Beginning clean and fast, featuring an open top-end and tight bottom-end, Channel 1 opens gradually to present simmering blues tones that churn like spirits in a cauldron. Advancing toward saturation, Crunch mode turns up the heat, adding the perfect touch of nastiness with added pick response and increased tonal complexity. Channel 2, achieves critical mass, invoking the famous white-hot Bogner gain—creamy, modern and screaming with sustain—offering everything from Brit rock right through to modern metal. Plus, with variable Bright settings, each channel can be customized to match the tone of your guitar and rig.

Featuring a selectable power section, from 40 to 20 watts, the Bogner Alchemist sonority quickly transforms to display a very different kind of magic. When switched to 20 watts, the Alchemist 212 undergoes a complete sonic metamorphosis, changing its harmonic complexity and feel to conjure the essence of the legendary Brown sound.

Reverb and Delay, in variable styles and levels, run in parallel separate from the original signal. The result is a rich, living and breathing, fully realized resonance capable of producing a complete tonal landscape.

Bogner includes a 4-button footswitch with the Alchemist 212 tube combo amp.

Bogner Alchemist Series 212 40W 2x12 Tube Guitar Combo Amp Features:

• 6L6 class-AB power section and five-12AX7 preamp; selectable power section (40 or 20 watts)
• Two 12" premium Celestion speakers
• Channel 1 (gold): Gain, Treble, Mid, Bass, Volume, Crunch mode, variable Bright, Deep switch; Channel 2 (mercury): Gain, Treble, Mid, Bass, Volume, variable Bright, Mid Shift; Shared: in parallel, Reverb Type, Reverb Level, Delay Type, Delay Level, Delay Repeats (Feedback), Tap Tempo
• Included four-button footswitch controls Channel Select, Boost, Delay and Reverb
• Eye-catching retro-modern fit-and-finish

Get the right chemistry on stage. Call or click now to order.

Alchemist spins the visions of discerning guitarists into gold.

The Bogner Alchemist 40W/20W Tube Guitar Amp Head boasts sparkling, articulate cleans, touch-sensitive leads and a bright and colorful crunch. Bogner Alchemist amplifiers offer you a modern take on vintage tube amp design. The Bogner Alchemist amp head owes its remarkable tonality to a 6L6 class-AB power section, and a five-12AX7 preamp. Its timeless appeal, though, comes from modern sonic ingenuity.

Bogner Alchemist amps have a 2-channel design. Each channel has its own voice and identity. Beginning clean and fast, featuring an open top-end and tight bottom-end, Channel 1 opens gradually to present simmering blues tones that churn like spirits in a cauldron. Advancing toward saturation, Crunch mode turns up the heat adding the perfect touch of nastiness with added pick response and increased tonal complexity. Channel 2, achieving critical mass, invokes the famous white-hot Bogner gain—creamy, modern and screaming with sustain—offering everything from Brit rock right through to modern metal. Plus, with variable Bright settings, each channel can be customized to match the tone of your guitar and rig.

The Alchemist tube amp head's power section is selectable from 40 to 20 watts. When switched to 20W, Alchemist undergoes a complete sonic metamorphosis, changing its harmonic complexity and feel to conjure the essence of the legendary Brown sound.

Reverb and Delay, in variable styles and levels, run in parallel separate from the original signal. The result is a rich, living and breathing, fully realized resonance capable of producing a complete tonal landscape.

Bogner includes a 4-button footswitch with the Alchemist 40w tube amp head.

Bogner Alchemist Series Tube Guitar Amp Head Features:

• 6L6 class-AB power section and five-12AX7 preamp; selectable power section (40 or 20 watts)
• Channel 1 (gold): Gain, Treble, Mid, Bass, Volume, Crunch mode, variable Bright, Deep switch; Channel 2 (mercury): Gain, Treble, Mid, Bass, Volume, variable Bright, Mid Shift; Shared: in parallel, Reverb Type, Reverb Level, Delay Type, Delay Level, Delay Repeats (Feedback), Tap Tempo
• Included 4-button footswitch controls Channel Select, Boost, Delay and Reverb
• Eye-catching retro-modern fit-and-finish

Get the right chemistry on stage. Call or click now to order.

A front end that rivals the most respected hi-gain amps!

This channel-switching amp incorporates a powerful 30W EL84 output section with a super-modified hi-gain front end. Its voicing is that of a hybrid AC30/Plexi with a super fluid hi-gain preamp circuit. The Super Drive 30 delivers over-the-top gain with such clarity and articulation that pick attack is audible in every note played. 30W class AB, 4 EL84 power tubes, 3 12AX7 preamp tubes, 5U4 rectifier, custom wound transformers. Controls include Treble, Mid, Bass, Drive, and Master Volume. Other features include Effects Loop, Slave Out, Multiple Speaker Outs with impedance selector switch, and the Lead Link Cabinet Switching system for routing signals to extension speakers. 30 lbs.

Save BIG when you buy today!

The choice amp for players who want over-the-top distortion in a compact package.

Eighteen tube-generated Class A/B watts for serious sustain even at low volume. A pair of EL84s and a 5U4 rectifier tube are the guts of this hi-gain, channel-switching combo. From the darker tones of a vintage Plexi to the compressed sweetness of an AC30, this amp covers all the tonal bases.

The Superdrive features speaker cable wiring by Monster Cable. Monster Cable uses Time Correct Windings and advanced cable construction to deliver an accurate signal with deeper bass and wider dynamic range in high performance sound reinforcement applications. Budda has never sounded better.

Budda Superdrive 18 1x12 Combo Amp Specifications:

• 23" x 10.5" x 21.5"D
• 45 lbs.

Budda Superdrive 18 1x12 Combo Amp Features:

• 18 Watt Class A/B Amp
• 2 Groove Tube EL84 Power Tubes
• Groove Tube 5U4 Rectifier Tube
• 3 Groove Tube 12AX7 Preamp Tubes
• Wiring by Monster Cable
• Treble, Mid, and Bass Controls
• Rhythm Volume, Master Volume
• Pull Bright on Rhythm Volume
• Drive Control
• 2 Channels, Rhythm and Hi Gain
• Effects Loop
• Slave Out
• Pull/Modern Mid Function
• Custom Wound Transformer with 4-8-16 OHM Switch
• Custom Designed Budda Phat 12 Speaker

Call or click today to order.

Emulates the finest vintage and modern hi gain tones at manageable volumes!

Budda's Superdrive 30 Series II Combo is built with the finest components to withstand the abuse of constant road work. You can dial in just the right amount of gain and volume for late night studio work and small club venues. The rhythm channel packs plenty of punch and dynamics, just like Budda's famous Twinmaster circuit. The flex of the EL84 and 5u4 rectifier tubes give an elasticity to your tone that is pure organic soul! The amplifier's hi-gain channel offers plenty of variation, from creamy blue tones, to full on hyperdrive crunch. The master doesn't choke the amp, so you get plenty of touch-sensitive sustain at low volume settings.

The Superdrive features speaker cable wiring by Monster Cable®. Monster Cable uses Time Correct Windings® and advanced cable construction to deliver an accurate signal with deeper bass and wider dynamic range in high performance sound reinforcement applications. Budda has never sounded better.

Budda Superdrive 30 Series II 1x12 Combo Amp Specifications:

• 30w Class A/B amp
• 4 Groove Tube EL84's and a 5u4 rectifier tube
• 3 Groove Tube 12AX7 Preamp Tubes
• Monster Speaker Cable
• Treble, Mid, and Bass controls
• Rhythm volume, Master Volume
• Drive control
• 2 Channels - rhythm & hi gain
• Effects loop
• Slave out
• Pull/modern mid function
• Custom wound transformer with 4-8-16 ohm switch
• Custom designed Budda Phat 12 speaker
  
  Dimensions: 23" x 10.5" x 21.5"
• Weight: 47 lbs

Call or click today to order.

Emulates the finest vintage and modern hi gain tones at manageable volumes!

Built with the finest components and construction to withstand the abuse of constant roadwork, the Budda Superdrive 30 Series II Combo won't let you down. You can dial in just the right amount of gain and volume for late night studio work and small club venues. The rhythm channel packs plenty of punch and dynamics, just like Budda's famous Twinmaster circuit. The flex of the EL84 and 5u4 rectifier tubes give an elasticity to your tone that is pure organic soul! The amplifier's hi-gain channel offers plenty of variation, from creamy blue tones, to full on hyperdrive crunch. The master doesn't choke the amp, so you get plenty of touch-sensitive sustain at low volume settings.

The Superdrive features speaker cable wiring by Monster Cable. Monster Cable uses Time Correct Windings and advanced cable construction to deliver an accurate signal with deeper bass and wider dynamic range in high performance sound reinforcement applications. Budda has never sounded better.

Budda Superdrive 30 Series II 2x12 Combo Specifications:

• Dimensions: 26" x 10.5" x 21.5"
• Weight: 57 lbs

Budda Superdrive 30 Series II 2x12 Combo Features:

• 30 Watt Class A/B Amp
• 4 Groove Tube EL84 Power Tubes
• Groove Tube 5U4 Rectifier Tube
• 3 Groove Tube 12AX7 Preamp Tubes
• Wiring by Monster Cable
• Treble, Mid, and Bass Controls
• Rhythm Volume, Master Volume
• Pull Bright on Rhythm Volume
• Drive Control
• 2 Channels, Rhythm and Hi Gain
• Effects Loop
• Slave Out
• Pull/Modern Mid Function
• Custom Wound Transformer with 4-8-16 OHM Switch
• Custom Designed Budda Phat 12 Speaker

Budda Superdrive 30 Series II 2x12 Combo Includes:

• footswitch

A good amplifier lets you rock the house . . . a great amp lets you find your voice. Get ready to sing and order your Superdrive 30.

A lightweight powerhouse that will rock your world.

The Superdrive 45 1x12 Combo is loaded with Budda's proprietary Phat 12 speaker and tweeked to coax all the bass and top end you can get out of the amp. The solid pine, dovetailed corner speaker cabinet responds like a neck through body guitar enhancing sustain. There is something to be said for the convenience of having the electronics and speaker all in one enclosure.

The Superdrive features speaker cable wiring by Monster Cable®. Monster Cable uses Time Correct Windings® and advanced cable construction to deliver an accurate signal with deeper bass and wider dynamic range in high performance sound reinforcement applications. Budda has never sounded better.

Budda Superdrive 45 Series II 1x12 Combo Amp Specifications:

• Dimensions: 27" x 14.5" x 25"
• Weight: 63 lbs

Budda Superdrive 45 Series II 1x12 Combo Amp Features:

• 4-8-16 ohm Selector Switch
• 45w Class AB power
• 2 KT66 power tubes
• Wiring by Monster Cable®
• Treble, Mid, and Bass controls
• Rhythm volume, master volume
• Pull bright on rhythm volume
• Over-drive control
• 2 Channels - rhythm & hi gain
• Selectable tube and solid state rectifier switch
• Effects loop
• Slave out
• Pull/modern mid-EQ function
• Custom-wound transformer
  
  

Put it in the cart!

A powerhouse that will rock your world.

The Budda Superdrive 45 Series II 2x12 Combo is loaded with proprietary Phat 12 speakers, tweaked to coax all the bass and top end you can get out of the amp. The additional speaker box dimensions increase the spatial dispersion of the sonic field and volume. A powerhouse of an amp that is the featured model for the Rockstar Supernova series.

The Superdrive features speaker cable wiring by Monster Cable. Monster Cable uses Time Correct Windings and advanced cable construction to deliver an accurate signal with deeper bass and wider dynamic range in high performance sound reinforcement applications. Budda has never sounded better.

Budda Superdrive 45 Series II 2x12 Combo Specifications:

• Dimensions: 26" x 10.5" x 21.5"
• Weight: 70 lbs

Budda Superdrive 45 Series II 2x12 Combo Features:

• 45 Watt Class A/B Amp
• 2 Groove Tube KT66 Power Tubes
• Groove Tube 5AR4 Rectifier Tube
• 3 Groove Tube 12AX7 Preamp Tubes
• Wiring by Monster Cable
• Treble, Mid, and Bass Controls
• Rhythm Volume, Master Volume
• Pull Bright on Rhythm Volume
• Drive Control
• 2 Channels, Rhythm and Hi Gain
• Effects Loop
• Slave Out
• Pull/Modern Mid Function
• Custom Wound Transformer with 4-8-16 OHM Switch
• Custom Designed Budda Phat 12 Speaker

Get ready to plug into a super-thick, hot-sounding rock amp. Order yours today!

Discover the magic tone of Budda's ultimate Hi-Gain Amp.

The Superdrive 45 represents years of research culminating in the design of the ultimate KT66 hi gain amp. The bite and complex overtones of Budda's KT66 circuit puts this amp in the realm of a newly discovered tone. The upper mid range bite combined with the tube rectifier sag makes for a very expressive amplifier, super sensitive to touch and pick attack. The bass response is earth shattering and sheer volume will have all the guitar players sniffing around your rig.

Budda Superdrive 45 Series II Amp Head Specifications:

• Dimensions:
• 30" x 14.5" x 14.5"
• 48 lbs
  
  45 watts
  
  

Budda Superdrive 45 Series II Amp Head Features:

• 2 KT66 Power Tubes
• Treble, Mid, and Bass controls
• Rhythm Volume, Master Volume
• Pull Bright on Rhythm Volume
• Drive Control
• 2 Channels, Rhythm and Hi Gain
• Selectable Tube and Solid State Rectifier Switch
• Effects Loop
• Slave Out
• Pull/Modern Mid Eq function
• Custom Wound Transformer with 4-8 OHM Switch
• Multiple Speaker Outs
• 4-8-16 Ohm Selector Switch
  
  Dimensions:
• 30" x 14.5" x 14.5"
• 48 lbs
  
  45 watts
  
  

Save BIG when you buy today!

This combo will blow you away!

The 80 watt, 4 x 6L6 power section of the Budda Superdrive 80 Series II 2x12 Combo is tight, with plenty of headroom and bottom. The solid-state rectifier tightens up the amp's response and makes for a quick attack. The rhythm channel has plenty of headroom and is as tight and articulate as it gets. The overdrive channel offers some of the most creamy, luscious overtones you will hear from a 6L6 amp. The master volume works like a master should, without choking the tone of the preamp section. With big bottle tubes, the dynamics of the pick attack are phat and powerful, even with the volume pot of the guitar turned down to 2. This amp is for the player whose sights are set on the large arena.

Artists and Producer friends of the Superdrive 80: Joe Bonamassa, Foo Fighters, Collective Soul, The Exies, Eddie Kramer, Instruction, and Systematic.

The Superdrive features speaker cable wiring by Monster Cable. Monster Cable uses Time Correct Windings and advanced cable construction to deliver an accurate signal with deeper bass and wider dynamic range in high performance sound reinforcement applications. Budda has never sounded better.

Budda Superdrive 80 Series II 2x12 Combo Specifications:

• Dimensions: 26" x 10.5" x 21.5"
• Weight: 75 lbs

Budda Superdrive 80 Series II 2x12 Combo Features:

• 80 Watt Class A/B Amp
• 4 Groove Tube 6L6 Power Tubes
• 3 Groove Tube 12AX7 Preamp Tubes
• Wiring by Monster Cable
• Treble, Mid, and Bass Controls
• Rhythm Volume, Master Volume
• Pull Bright on Rhythm Volume
• Drive Control
• 2 Channels, Rhythm and Hi Gain
• Effects Loop
• Slave Out
• Pull/Modern Mid Function
• Custom Wound Transformer with 4-8-16 OHM Switch
• Custom Designed Budda Phat 12 Speaker

Rub the belly, click the mouse, place the call - get your Budda today!!

An amp to more than please the serious tone freak.

With an 80W, 4 - 6L6 power section and a custom-wound transformer, the Superdrive 80 is tight and beefy with plenty of headroom. It gets the tone of the gods and exceptional pick dynamics even at conversation level. In the preamp section, 12AX7s and a 5U4 rectifier tube deliver a tight and articulate clean channel and a lusciously creamy overdrive channel. Controls for treble, mid, and bass EQ; rhythm volume; hi-gain drive; and master volume. The transformer can be switched from 4, eight, and sixteen ohms to match your speaker setup. Effects loop and a slave out connection are provided.

Budda Superdrive 80 Series II Head Features:

• 80W of power from four 6L6s
• preamp tubes are 12AX7s
• Custom-wound transformer
• Two channels (clean and overdrive)
• Treble, mid, and bass EQ knobs
• Rhythm volume and hi-gain drive controls
• Master volume
• Effects loop and slave out connections
• Transformer can be switched for four, eight, and sixteen-ohm operation

Order today and do the Budda boogie!

A low wattage powerhouse!

The Superdrive Series II 18 head is designed for the clubs and project studio. This lightweight two-channel EL-84 driven amp offers sparkling rhythm complexity with super sensitive hi gain articulation. The jewel in this amp is apparent when the power section heats up and the dual 84's are being pushed to the point of no return. There something to be said about getting the power tubes to act like a preamp cranked where the sag of the circuit is creamy and the hang time on the note is forever at your fingertip. The Superdrive 18 is voiced for modern vintage styles of music.

Budda Superdrive Series II 18 Head Specifications:

• 30" x 14.5" x 14.5"
• 41 lbs
• 18 watts
• 2 EL84's and a 5U4 rectifier tube
• Treble, mid, and bass controls
• Rhythm volume, master volume
• Pull bright on rhythm volume
• Drive control
• 2 channels, rhythm and hi gain
• Effects loop
• Slave out
• Pull/modern mid function
• 12AX7 high grade preamp tubes
• Custom wound transformer with 4-8 ohm switch

Rub the belly, click the mouse or place the call. Order today.

A low wattage powerhouse!

The Superdrive Series II 18 head is designed for the clubs and project studio. This lightweight two-channel EL-84 driven amp offers sparkling rhythm complexity with super sensitive hi gain articulation. The jewel in this amp is apparent when the power section heats up and the dual 84's are being pushed to the point of no return. There something to be said about getting the power tubes to act like a preamp cranked where the sag of the circuit is creamy and the hang time on the note is forever at your fingertip. The Superdrive 18 is voiced for modern vintage styles of music.

Budda Blem Superdrive Series II 18 Head Specifications:

• 30" x 14.5" x 14.5"
• 41 lbs
• 18 watts
• 2 EL84's and a 5U4 rectifier tube
• Treble, mid, and bass controls
• Rhythm volume, master volume
• Pull bright on rhythm volume
• Drive control
• 2 channels, rhythm and hi gain
• Effects loop
• Slave out
• Pull/modern mid function
• 12AX7 high grade preamp tubes
• Custom wound transformer with 4-8 ohm switch

Rub the belly, click the mouse or place the call. Order today.

The limited edition 10th anniversary Twinmaster epitomizes the art of hand crafted amplification.

The original Twinmaster Ten that led the low wattage tube amplifier revolution inspired this amplifier. It includes the original design specifications with highly customized treatments.

The chassis has been designed in a unique purple mirror anodized finish that is buffed to perfection. 2 inputs, normal and hi gain offer a multitude of gain characteristics covering the gamut of tone from super clean rhythm chords to modern power crunch.

The electronics are hand wired point-to-point with high-grade audio components. The solid pine finger jointed cabinet is finished in a beautiful purple beluga vinyl that has the feel of suede with a custom hand sewn Napa leather purple handle and matching leather corners. The cabinet interior is finished in imported German automotive cloth with custom badge plaque commemorating the build date and limited serial number issuance hand signed by the designer.

This special, limited-edition collectible amplifier includes a custom-purple leather slipcover and matching leather Budda brim with certificate of authenticity. Each of these amplifiers will be loaded with a limited edition custom-built Budda Phat 12 speaker.

Budda TwinMaster 10th Anniversary Reissue Hand-Wired Combo Features:

• Hand wired point to point
• 2 High grade EL84 Power tubes
• 2 High grade 12AX7 Preamp tubes
• 1 5U4 Rectifier tube
• Custom mirror anodized purple chassis
• Class AB Power Section
• Custom wound transformer
• Normal & High gain inputs
• Treble, Bass, and Volume controls
• Effects loop with Slave out
• Custom designed Budda Phat 12 speaker
• Custom Purple Beluga Vinyl Covering
• 12AX7 High Grade Preamp Tubes
• Limited production run of only 100 units Certificate of authenticity

Don't miss this rare opportunity to get your own hand-wired, collectible amp - order today!