4 channels with selectable voicing for maximum versatility.

Each of the Egnater Tourmaster guitar amp's channels has an identical set of controls, but that is where the similarities end.

Clean/Vintage 1 is the cleanest of the four. Within this channel lives a range of Classic tones ranging from pristine sparkle with the voicing switch set to MODERN to a punchy, aggressive drive (think clean JTM) in the CLASSIC mode. Pressing the button to activate the CONTOUR control opens an entire new range of beautiful clean, almost acoustic, tones not often found in a tube amplifier.

Clean/Vintage 2 has a very similar voicing to the Clean/Vintage 1 channel. This channel has more gain, so it can be pushed into mild overdrive. Sweet blues and classic rock tones are easily coaxed out of this channel. The contour knob adds another level of unique flavors.

Overdrive 1: From AC/DC crunch to modern rock, this channel covers a lot of bases all by itself. Dial down the gain and the feel is pure classic rock. Push the gain and enter into more modern, saturated territory. Scoop the mids with the CONTOUR control for monstrous metal or set it for classic British rhythm.

Overdrive 2: The Tourmaster's most intense channel, you'll find ferocious gain with a wide range of tones to suit the 80s shredder as well as the heaviest modern metal player. Scoop the mids with the powerful CONTOUR control for massive crunch or push the midrange for a solo tone that cuts through with serious authority.

Power Grid: This is a really cool feature your will only find on the Egnater Tourmaster amps. Using a group of 5 slide switches on the rear panel, you can set the power output for each channel individually. There is a 3-position slide switch corresponding to each of the four channels and a single FULL POWER/ HALF POWER slide switch. In FULL POWER mode, you can choose between 100w, 50w or 25w per channel. In the HALF POWER mode, you can between choose 50w, 25w or 10w per channel.

With the Tourmaster 4212 tube amp, you not only have a wide array of tones available from the preamp channels, but with the Power Grid you can introduce any amount of power tube distortion you wish to each channel: all preset, all automatic.

The Tourmaster 4212 amplifier is loaded with custom-voiced Egnater Elite-80 speakers from Celestion, and includes heavy duty detachable casters and metal slide handles.

Egnater Products Tourmaster Series 4212 All-Tube Guitar Combo Amp Specifications:

• Output Power: 10 to 100 Watts RMS Presetable
• High Input Impedance: 1meg Ohm
• Low Input Impedance: 94k Ohms
• Output Impedance: 4 Ohms, 8 Ohms Or 16 Ohms - Selectable
• Effects Loop Send Impedance: 4k7 Ohms
• Effects Loop Return Impedance: 250k Ohms
• THD: 5% At Rated Output
• Preamp Tubes: Eight Selected Groovetubes / Egnater12AX7A / ECC83
• Output Tubes: Four Selected Groovetubes / Egnater 5881
• Density: +6db @ 120hz
• Presence: +8db @ 3.2khz
• Record Output Level: -50dBv To 0dBv
• Dimensions: 27.5" (W) x 11" (D) x 22 " (H)
• Weight: 95 lbs

Egnater Products Tourmaster Series 4212 All-Tube Guitar Combo Amp Features:

• MAIN FEATURES
• 100W All-Tube Head
• Four Channels with Selectable voicing
• Power Grid: Set Wattage for Each Channel
• from 10w up to 100w
• Tube-driven Assignable Effects Loop
• Tube Driven Reverb
• Rugged Six-Button Footswitch
• Powered by Groovetubes
  
  FRONT PANEL
• Four independent channels each with: Gain control; Master control; Treble, middle, bass; Classic/modern voicing switch
• Tube driven reverb
• Master Presence/Density
  
  REAR PANEL
• Assignable tube driven effects loop: Assign to channels 1&2, Assign to channels 3&4, Assign to all four channels, Assign to pedal only, Send and return level controls, Selectable series or parallel
• Cabinet voiced line/recording out
• Simple master bias adjust with test points
  
  POWER GRID
• Six preset power output levels for each channel from 10 to 100 watts
• Full or half power switch

Call today to get an extensive array of amazing tones with the Tourmaster 4100.

The Electro-Harmonix 12AX7EH is a preamp tube that provides high gain with ultra low noise. The tube's detailed, musical tone rivals the most desirable NOS types. Unique spiral filament eliminates the filament-to-cathode induced hum common on amps that use AC on the filaments.

Order tubes BEFORE they need to be replaced, and save the gig.

Warmth and accuracy for your condenser mics!

With the Electro-Harmonix 12AY7 Tube Microphone Preamp, Electro-Harmonix offers an affordable tube micrphone preamp that won't disappoint. Equipped with a 12AY7 EH tube and a 12AU7 EH driver, it gives microphones the widest dynamic range with the warmest possible tone and accuracy. The 12AY7 Mic Pre uses an actual 200V supply instead of the "faked out" 12 or 48 volts you'd get with common models and delivers 50dB of gain into a high impedance load or 40dB gain into 600 ohms.

The 12AY7 Mic Preamp's special FET current-balancing circuit allows the tubes to amplify the microphone signal to line level while eliminating noise and protecting against hum and hostile electrical environments. It has an extra TRS output for separate line control, which can be used as a splitter or an aux send for monitoring. Input connections are balanced in and out (XLR) with a 1/4" TRS balanced buffer out. The Electro-Harmonix mic pre unit also boasts a phase reverse switch and a +4dBm indicator light for setting optimal mic level. The 48V phantom power is soft starting and pop-free.

Electro-Harmonix 12AY7 Tube Microphone Preamp Features:

• Equipped with a 12AY7 EH tube and a 12AU7 EH driver
• Wide dynamic range, warm tone, and superb accuracy
• 200V supply delivers 50dBs of gain into high load, 40dB gain into 600 ohms
• FET current-balancing mic preamp circuitry eliminates noise and hum
• TRS output for separate line control (use as a splitter or for monitoring)
• Balanced XLR in and out
• 1/4" TRS balanced buffer out
• Phase reverse switch
• +4dBm indicator light for setting optimal mic level
• 48V phantom power with soft start

Now you can afford real tube sweetening in your recording. Order the 12AY7 Tube Preamp today.

The Electro-Harmonix 6550EH power tube is the finest current production tube for any amp using 6550 or KT88 valves. The 6550EH offers the maximum power of any 6550 with the linearity that guitar and bass players want. With 42 watts of plate dissipation in tetrode operation and 44 watts in triode, the 6550EH offers an improvement in power over even the most desirable vintage types including the Tung-Sol 6550 and Genelex KT88. This extra headroom in a 6550EH equipped amp means bass players can finally realize the full dynamic range of the instrument and the sweetest tone available.

The extra ruggedness of the 6550EH power tube was engineered with the punishing abuse of guitar amps in mind. The nickel steel side rod mica supports ensure that the 6550EH will hold up in even the most punishing environment of high powered bass amps like the Ampeg SVT and combos where the tube is only inches from the speaker and still deliver the sweetest tone of any 6550 or KT88. The 6550EH will greatly improve the performance of any amp using 6550's.

Order tubes BEFORE they need to be replaced, and save the gig.

The Electro-Harmonix 6L6EH Power Tube is modeled after the vintage RCA 6L6GC "blackplate." Features large plate dimensions and improved grid structure for increased power handling capabilities. Also features mica spacers with metal springs to eliminate tube rattle and microphonics. The 6L6EH offers tone and performance superior to any other 6L6 or KT66 type.

These are Electro-Harmonix 6L6EHs in platinum matched sets. Their platinum matching process consists of a 24-hour tube burn-in period followed by a bias (plate) current measurement in milliamps.

Order tubes BEFORE they need to be replaced, and save the gig.

Great for Fenders!

Sweet, singing tone for high plate voltage amps. The 6V6EH combines a specially developed cathode coating, careful alignment of the grids, and a tri-alloy plate material to create a rugged, wonderful-sounding 6V6 that performs flawlessly at up to 475 volts. Perfect for high plate voltage amps like the Fender Deluxe Reverb.

Give your amp a huge boost. Order today!

The Electro-Harmonix EL34EH is an extremely musical and predictable power tube with a sound that is rich, smooth, and detailed without being edgy. It is the perfect EL34 for vintage equipment and a sure way to improve the performance of modern equipment. According to the technical journal, Vacuum Tube Valley, "The Electro-Harmonix EL34EH is balanced throughout the entire music spectrum. Bass goes deep and is tight, mids are sweet and well defined, and highs are detailed and extended."

These are Electro-Harmonix EL34EH's in platinum matched sets. Their platinum matching process consists of a 24-hour tube burn-in period followed by a bias (plate) current measurement in milliamps.

Order tubes BEFORE they need to be replaced, and save the gig.

These are Electro-Harmonix EL84EH power tubes in platinum matched sets. The EL84 is the most common low power pentode tube, popularized in early Vox AC30 amps. Rediscovered by Matchless amps and now currently used by nearly every tube amp company. Delivers quick, soft overdrive distortion, great for recording but usually too low volume for live gigs.

Electro-Harmonix' platinum matching process consists of a 24-hour tube burn-in period followed by a bias (plate) current measurement in milliamps.

Order tubes BEFORE they need to be replaced, and save the gig.

2 x 50-watt tube power amp with MIDI switching.

The Engl 840 is one very impressive 2 x 50 watt tube power amp. If you like the rich harmonic tone of 5881 power amp tubes, the 840/50 should be your first choice. It delivers a perfect match of attack & power to give your rack system the headroom that is needed.

In addition to first class tube tone, the Engl 840 power amp offers a number of practical features. Each of the two stereo channels features two volume and two presence controls (A and B), so you can dial in individual volume and presence settings. The A/B controls are switchable via an external footswitch or through MIDI commands via a MIDI switcher. Intelligent design features, superior craftsmanship, and quality components are what the Engl 840 is all about.

Engl 840 Tube 50W Stereo Poweramp Specifications:

• Rated power: 2 x 50 watt
• Outlet each channel: 8 and 16 ohm
  
  Input level poweramp
• Gain (14) off: -5 dB max. 15 dB
• Gain (14) on: -20 dB max. 0 dB
  
  Tubes
• Input tube V1: ECC83/12AX7, selected
• Phase shift tube V2, V3: ECC83/12AX7
• Power tubes V4 to V7: 5881 (or 6L6GC), matched sets
  
  Fuses
• AC Mains: 230V, 100 and 120V
• External: 1,6 AM; 3,15 AM
• Internal: 1,6 AT; 3,15 AT
• Power Tube Fuses: 2 x 315 mAM
  
  Dimensions: 19", 2 rack spaces; depth: 300mm
• Weight: approx. 12 kg

Engl 840 Tube 50W Stereo Poweramp Features:

• Two volume and two presence controls on each of two channels
• Superior craftsmanship
• Quality components

Order with the protection of our 45-day lowest price and total satisfaction guarantees.

Vintage tone, modern control.

The Engl Classic Tube 50 delivers 100% vintage tube tone in an amplifier that lets vintage meet the demands of the 21st century. 2 channels with separate gain and master volume control deliver a wide range of vintage tones. Up to date features like FX Loop, foot switchable channels, and 2 foot switchable volume levels meet the demands of the modern guitar player without sacrificing vintage tube tone.

Engl Classic 50W 2x10 Guitar Combo Amp Specifications:

• Rated power: approx. 50 watts at 8 or 16 ohms
  
  Tubes
• V1 (input-tube): ECC 83/12AX7, FQ Grade
• V2, V3: ECC 83/12AX7 selected
• V4: ECC 83/12AX7, standard
• V5, V6: 5881 (6L6GC) matched set
  
  Fuses
• External: 1 AT (slow) at 230 volts
• Internal: 1,25 AT (slow) at 230 Volts; 2,5 AT (slow) in the 100 and 120 Volt models
  
  Power consumption: 155 watts max.
• Dimensions: 58 x 48 x 27 cm
• Weight: 48.4 lbs. (24 kg)

Engl Classic 50W 2x10 Guitar Combo Amp Features:

• 2 channels with separate gain and master volume control
• 50W power
• 2 x 10" speakers
• FX Loop
• Foot switchable channels
• 2 foot switchable volume levels

A great amp. Compact yet powerful. Order today.

Vintage tone, modern control.

The Engl Classic Tube 50 Amplifier delivers 100% vintage tube tone in an amp that lets vintage meet the demands of the 21st century. 2 channels with separate gain and master volume control deliver a wide range of vintage tones. Up to date features like FX Loop, foot switchable channels and 2 foot switchable volume levels meet the demands of the modern guitar player without sacrificing vintage tube tone.

Engl Classic 50W 2x12 Guitar Combo Amp Specifications:

• Rated power: approx. 50 watts at 8 or 16 ohms
  
  Tubes
• V1 (input-tube): ECC 83/12AX7, FQ Grade
• V2, V3: ECC 83/12AX7 selected
• V4: ECC 83/12AX7, standard
• V5, V6: 5881 (6L6GC) matched set
  
  Fuses
• External: 1 AT (slow) at 230 volts
• Internal: 1,25 AT (slow) at 230 Volts; 2,5 AT (slow) in the 100 and 120 Volt models
  
  Power consumption: 155 watts max.
• Dimensions: 70 x 50 x 27 cm
• Weight: 31 kg

Engl Classic 50W 2x12 Guitar Combo Amp Features:

• 2 channels with separate gain and master volume control
• 50W power
• 2 x 12" speakers
• FX Loop
• Foot switchable channels
• 2 foot switchable volume levels

A great amp compact yet powerful. Order today.

For those who appreciate vintage classic guitar tone.

The Engl Classic Tube 50 is an ideal guitar amp head for vintage tone connoisseurs. The Classic 50 is your amp if you like to play with warm shimmering clean sounds and cut through with fat sustain and singing, creamy lead tones. This is an amp that jazz players and blues rockers alike will appreciate. Features an effects loop, reverb, and channel switching.

Engl Classic Tube 50 50W Guitar Amp Head Specifications:

• Rated power: approx. 50 watts at 8 or 16 ohms
  
  Tubes
• V1 (input-tube): ECC 83/12AX7, FQ Grade
• V2, V3: ECC 83/12AX7 selected
• V4: ECC 83/12AX7, standard
• V5, V6: 5881 (6L6GC) matched set
  
  Fuses
• External: 1 AT (slow) at 230 Volts; 2 AT (slow) in the 100 and 120 Volt models
• Internal: 1,25 AT (slow) at 230 Volts; 2,5 AT (slow) in the 100 and 120 Volt models
  
  Power Consumption: 155 watts max.
• Dimensions: 58 x 27 x 27 cm
• Weight: 39.6 lbs. (18 kg)

Engl Classic Tube 50 50W Guitar Amp Head Features:

• FX loop
• Channel switching
• Reverb
• 50W at 8 or 16 ohms

Order today and enjoy that classic tube tone you've been seeking.

A tube-driven powerhouse designed to let you create your own signature sound!

The Fireball amp head's vast gain reserves make the Fireball the king of the hill. Delivering tight bottom end, smooth top end, and incredible sound pressure levels, this amp head puts into the hands of today's guitarists the sonic tools they need to carve out highly defined, expressive tones of their own. Other trademark Engl features include a second master volume, electronic power amp monitoring, and a variable FX loop. Hearing is believing.

Engl Fireball 60W Guitar Amp Head Specifications:

• Rated power: approx. 60 watts at 8 or 16 ohms
  
  Tubes
• Poweramp: V1, V2: 6L6GC matched set
• Preamp: V3 (input tube): ECC 83/12AX7, FQ selected; V4, V5: ECC 83/12AX7 selected; V6: ECC 83/12AX7 standard
  
  Fuses
• External: 1 AT (slow) for the 230 V model, 2 AT (slow) in the 100 and 120 V models
• Internal: 1,25 AT (slow) for the 230 V model; 2,5 AT (slow) in the 100 and 120 V models
  
  Power consumption: 160 watts
• Dimensions: 71 x 27 x 27 cm
• Weight: 19 kg

Engl Fireball 60W Guitar Amp Head Features:

• Second master volume
• Electronic power amp monitoring
• Variable FX loop
• 3-band EQ with presence

Order today with the protection of our 45-day lowest price and total satisfaction guarantees

A 4-channel 100W amp head crafted in Germany with pure tube tone.

The ENGL Invader 100 E 642 Tube Guitar Amp Head features 8 different gain stages in 4 separate channels that include four separate EQs. Powered by 4 EL 34 Tubes the Invader delivers a total amount of 100 watts. The idea behind the Invader is that guitarists need most flexibility and control for any given playing situation. The Invader achieves that with a new concept: This amp does not feature the classic 4 channel head layout of a Clean- Crunch- Rhythm- Lead channel. The Invader is different.

Named Channel 1, 2, 3, 4, these channels are able to produce different Overdrive / Gain structures in each one from Crunch to High Gain. Every Overdrive Voicing in the channels is different. In conjunction with the Hi / Lo gain switch, which can be remote controlled and a separate EQ section for each channel, there will be no limits except the guitarist creativity.

• Channel 1: Silken Clean to Crispy Crunch
• Channel 2: Fat & Bulky Crunch to NU-Rock / Metal Rhythm / Lead
• Channel 3: Tight Warm Crunch to Classic Dynamic Rock / Metal
• Channel 4: Modern Crunch to Singing Harmonic Leads


There are three different remote interface ports available on the Invader 100: A Serial Amp Control Port accepts the Custom Z-9 Footswitch (optional); use it as a conventional switcher to select channels and two sound-shaping functions directly. Then there's the MIDI In, which accepts the Z-9 for use as a simple MIDI footcontroller or any other MIDI footcontroller. Finally, the amp is equipped with a stereo jack that takes a dual footswitch, allowing you to switch the four channels remotely.

Engl Invader 100 E 642 Tube Guitar Amp Head Specifications:

• Preamp:
• 4 channels. four 3-stage EQs incl. logarithmic treble curve, Bright switch for Channels 1 and 2, separate Gain and Volume controls for each channel, Hi / Lo Gain switch, Noise Gate with threshold adjust, 2 parallel FX loops, 4 x ECC 83 / 12 AX 7 preamp tubes. Tuner out activated via standby switch.
  
  Master Section: 100 watts (4 EL 34 tubes), Master A / B switch, Presence and Depth Punch control for poweramp soundshaping, Electronic Tube Protection circuit and powertube monitoring system.
  
  Outputs: MIDI IN / THRU, jack for ENGL Z-9 footswitch, jack for ENGL Z-4 / Z-3 footswitch, 2 x FX Send, 2 x FX Return, 2 x FX Balance, preamp out / tuner, line out / power amp, speaker outs 2 x 4, 2 x 8, 1 x 16 ohms
  
  MIDI programmable functions at a glance, storable in any combination as required: Channel switching, Master A / B, Bright, Hi / Lo Gain, FX Loop 1 and 2, noise gate, amp mute (tuner)
  
  Dimensions (l x h x d): 27.95 x 10.62 x 11.41 , (71 x 27 x 29 cm)
• Weight: 46.29 lbs., (21 kg)

Engl Invader 100 E 642 Tube Guitar Amp Head Features:

• Four Basic Channels with separate Gain and Volume knobs
• Two Gain Variants for each channel
• Four Voicing Sections - 3-band EQ for each channel
• Bright sound-shaping Button for Channel 1 & 2
• Two Effects Loops that are variable and switchable
• A and B Master knobs are accessible via MIDI
• MIDI Ins and Thru ports
• 128 MIDI Presets via 16 Channels
• Three different remote interface ports
• Programmable Noise Gate in Channel 2, 3, and 4

Get one of the best tools of the trade today!

Near endless tone shaping with enormous tube-driven power.

The Invader 150 Amp Head gives you maximum flexibility and control for any given playing situation. Easy to handle, the Inavader focuses on pure tube tone. Channel 1, 2, 3, and 4 are capable of producing different Overdrive/Gain structures-from Crunch to High Gain. Every overdrive voicing in the channels sounds different. In conjunction with the HI/Lo Gain switch and a separate EQ section for each channel, there are no limits. Once you've tried it, you won't escape the Engl Invader.

Engl Invader 150W Guitar Amp Head Specifications:

• Output power: 150 watts
  
  Input sensitivity
• Input: from 20 dB, , max. 0 dB
• Effect Return: from 20 dB nominal, max. 0 dB
  
  Output level
• SEND, level range: from 20 dB to approx. 0 dB max.
• Pre Out: -20 dB bis ca. + 3 dB max.
• Line Out: approx. 0 dB at nominal power output
  
  Power consumption: approx. 550 watts max.
  
  Fuses
• External at 230/240 mains voltage: 2.5 ATL (2.5 amps slo-blo)
• External at 100/115/120 mains voltage: 5 ATL (5 amps slo-blo)
• Internal at 230/240 mains voltage: 3.15 AL (3.15 amps slo-blo)
• Internal at 100/115/120 mains voltage: 6.3 ATL (6.3 amps slo-blo)
  
  Tubes
• V1, V2, V3, V4, V5, V6: EL34, matched sets
• V7: ECC83 FQ, input tube
• V8, V9: ECC83 selected
• V10: ECC83 standard
  
  Logic control system
• Processor, software: AT89C52 microcontroller with internal 8K Flash Memory for software source code, upgradeable with external Programmer
• Memory: EEPROM 93C66 for data retention
  
  System interfaces
• MIDI: Asynchronous data protocol according to the MIDI standard, MIDI program changes 0 127, MIDI channels 1 16, MIDI controller 7 (main volume), value 0-5 = Master Volume Mute, Mute, value > 5 = default, Master Volume level
  
  Serial Amp Control: Proprietary ENGL asynchronous data protocol
• Dimensions: 71 x 28 x 29 cm
• Weight: 52.9 lbs. (24 kg)

Engl Invader 150W Guitar Amp Head Features:

• Two Gain variants for each of the basic channels
• Four voicing sections: one EQ for each Channel featuring Bass, Middle and Treble
• Bright sound-shaping button for Channel 1 and Channel 2,
• Two effect loopsd B Master knobs are accessible via MIDI
• MIDI In and Thru ports serve to integrate the amp into a MIDI system
• 128 MIDI presets, accessible via 16 MIDI channels
• Offers three different remote interface ports: Serial Amp Control Port accepts the Custom Z-9 Footswitch (sold separately); the MIDI In accepts the Z-9 for use as a simple MIDI footcontroller or any other MIDI footcontroller; amp is equipped with a stereo jack that takes a dual footswitch, allowing you to switch the four channels remotely
• Programmable Noise Gate for suppressing noise in Channel 2, Channel 3, and Channel 4

Order today with the protection of our 45-day lowest price and total satisfaction guarantees

A tone tweaker's dream based on a powerful tube configuration!

4-channel, all-tube powered head, the PAowerball amp head offers sound-shaping options unrivaled by any other. Designed to satisfy the exacting demands of discerning players, it delivers all the tonal hues and colors you need to paint the most vivid musical pictures imaginable. Housed inside this newly designed enclosure is a powerhouse 100-watt amp boasting 6L6GC tubes. The Engl amp head delivers the sonic goods you need to dial in everything from contemporary ultra-high gain lead tone to crystal-clear clean and punchy crunch sounds. An astonishing amount of gain reserves, remarkable tonal versatility, and bone-rattling bottom end have crowned the Powerball king of the heap among modern-day guitar amp heads.

Courtesy of its ability to crank out tight, focused low end, glossy top end and jaw-dropping sound pressure levels, the Powerball amp head provides the contemporary guitarist with richly detailed tone and the kind of cut-thru-the-din assertiveness that sets standards for amps of this class. And in keeping with the Engl tradition of engineering excellence, it sports a host of hip features: a second master volume, electronic power amp monitoring, an adjustable FX loop, and a depth punch knob that shapes the head's response by beefing up the low end. But that's not the last word on this Engl head's innovative features: you also get two different sound voicings, Open and Focused. Engl created these voicings to extend the range of lead sounds you have at your disposal by tweaking mid-range response to suit different playing styles and applications.

There are a few more handy features to rave about: Ships with a Z-5 Custom Footswitch Port. Designed to take the ENGL Z-5 footswitch (sold separately) that lets you control all key sound-shaping functions remotely. ENGL added another new audiophile wrinkle-an adjustable noise gate for the Lead channel. Old world craftsmanship and highest quality components are part of what makes Engl amp heads so special, and the Powerball is no exception.

Engl Powerball 100W Guitar Amp Head Specifications:

• Preamp: 4 channels: Clean, Crunch, Low Gain Lead, High Gain Lead, 2 Bright/Bottom switches, Extra Crunch Treble control, 2 EQs, each 4 band, one for channel 1/2, one for channel. Volume controls for each channel, 4 x ECC83 preamp tubes
• Master Section: 100 watts (1 x ECC 83, 4 x 6L6GC power amp tubes), Master A/B, Presence, Depth Punch controls
• Outputs: Integrated Noise Gate for high gain channels, threshold control, fx loop control (parallel to serial), 2 x Z-4 or Custom Z-5 footswitch ports, Speaker Outs (2 x 4, 2 x 8, 1 x 16 Ohms)
• Dimensions: 71 x 27 x 27 cm
• Weight: 20 kg

Engl Powerball 100W Guitar Amp Head Features:

• Second master volume, electronic power amp monitoring, adjustable FX loop and Depth Punch knob
• Two different sound voicings, Open and Focused
• Z-5 Custom Footswitch Port (footswitch sold separately)
• Adjustable noise gate for the Lead channel

Order today with the protection of our 45-day lowest price and total satisfaction guarantees

Big tube sound in a small box!

The Raider 100 E 344, from ENGL, is equipped 100 watts of tube power and a single Celestion Vintage 30 speaker. This amp will amaze you with it's fat bass, huge amounts of midrange and well dressed treble. In conjunction with the 100 Watt power amp section , driven by 4 x 5881 tubes, the RAIDER sounds like having more speakers engaged. Two channels, that can be played in Hi or Lo Gain mode and deliver 4 different gain stages to use, allow the RAIDER to be the perfect workhorse for straight fat Rock sounds. Channel One shines with a clean sparkle. Engage the Hi Gain Mode and dive into big rhythm or bluesy lead tones. Channel Two impresses with big, bad Rock sounds even in Lo Gain mode. Using Hi Gain allows more sustain, rich harmonics, and adds nice smooth overdrive. The RAIDER delivers tons of gain but still maintains clarity. The switchable Mid Boost gives you the chance to cut through in any situation. Preamp:
2 channels, Hi / Lo Gain Mode, 3-band EQ , Bright & Clean Bright Switch, Mid Boost Switch, 4 x ECC 83 preamp tubes. Master Section:
Master A / B, Presence, Depth Punch, adjustable Noisegate, 4 x 5881 Power Amp Tubes Outputs:
FX Loop with Balance control, FX Loop switchable to complete hardware bypass, Speaker outs (2 x 8, 2 x 4, 1 x 16 Ohms), 2 x dual Footswitch Ports (S. A. C. with ENGL Z-9 Foot-switch or Z-4)

Engl Raider 100 E 344 100W 1x12 Tube Guitar Combo Amp Specifications:

• Dimensions ( W x H x D): 22.83" x 18.89" x 10.62", (58 x 48 x 27 cm)
• Weight:
• 62.39 lbs., (28.3 kg)

Engl Raider 100 E 344 100W 1x12 Tube Guitar Combo Amp Features:

• 100 Watts
• 2 Channels
• Hi/ Lo Gain Mode
• 3-Band EQ
• Bright & Clean Bright and Mid Boost
• 4 x 5881 Power Tubes
• Adjustable Noisegate
• FX Loop with Balance Control
• 1x12" Speaker

Get a Rock'N'Roll workhorse today.

Easy to handle, it puts out all the gain and crunch rockers require!

This is an all-tube guitar amp head featuring the sound made famous by guitar legend Ritchie Blackmore. Based on the successful Savage technology, this Engl amp head delivers fine tuned sounds from clean, to crunch, to high gain lead. You can vary the amount crunch for the 2 channels Clean and Lead via the Gain Lo/Hi switch. More special features include 2 master volume controls, the contour button and a custom footswitch port for the connection of a compact footpedalboard that enables the direct access to all important switching functions. With its high-quality components and superior finishing, the Ritchie Blackmore amp head is built to last. Enjoy a wide range of killer tones in an exceptionally easy to handle package.

Engl Ritchie Blackmore Signature 100W Guitar Amp Head Specifications:

• Preamp: 4 channels: Clean, Crunch, Lead, heavy Lead, Bright switch, 3 band EQ, Contour switch, Hi/Low Gain switch, Lead Presence Control, 3 x ECC 83 preamp tubes
• Master Section: Master A/B, 100 watts (1 x ECC 83, 4 x 5881 power amp tubes)
• Outputs: Speaker Outs, (2 x 4, 2 x 8, 1 x 16 Ohms), fx loop (parallel to serial adjustable), footswitch jacks, Z-3/Z-4 or custom Z-5
• Dimensions: 71 x 27 x 27 cm
• Weight: 18 kg

Engl Ritchie Blackmore Signature 100W Guitar Amp Head Features:

• 100W of tube power
• 4 channels
• 3-band EQ with presence
• Master Volume controls
• Contour button
• Custom Footswitch Port (footswitch sold separately)
• 4-, 8-, 16-ohm speaker outputs
• High-quality components and superior finishing

Order today with the protection of our 45-day lowest price and total satisfaction guarantees

Superquick response and attack for the modern rocker!

One of the best-known Engl heads, the Savage 120 head sets new standards in modern rock music with its unique sound. Fast response and attack plus punchy headroom and dynamics are the trademarks of this workhorse. 4 basic sounds plus lots of handy features make the Savage 120 amp head the ideal choice at the heart of a modern rock rig.

Engl Savage 120W Guitar Amp Head Specifications:

• Preamp: 4 channels, Clean, Crunch 1, Crunch 2, Lead, 2 EQs, Sensitivity switch, Bright switch, 2 FX loops (both parallel to serial adjustable), Lead Boost, Contour switch, Rough/Smooth switch plus Hi Balance control, 5 x ECC 83 preamp tubes
• Master Section: Presence A/B, Master A/B, Depth Boost, 120 watts (1 x ECC 83, 2 x 6550 power amp tubes) ECS tube protection
• Outputs: Balanced Line out, frequency-compensated, adjustable, overload control, speaker outs (2 x 4, 2 x 8, 1 x 16 ohms), 2 FX loops, Z-3/Z-4 footswitch jacks, MIDI interface port, Z-10 footswitch port
• Dimensions: 71 x 27 x 27 cm
• Weight: 20 kg

Engl Savage 120W Guitar Amp Head Features:

• Four channels: Clean, Crunch 1, Crunch 2 and Lead assigned to two main channels
• Four gain pots and a separate volume control for each channel
• Rough/Smooth mode selector for the Crunch 2 and Lead channels
• Diverse switching functions
• 2 voicing sections and 2 master volume controls
• Number of Signal paths
• Emergency Circuit System

If you're ready for Engl, the Savage 120 is ready for you. Order today.

All-tube power you can shape any way you want!

The Engl Screamer 50 delivers the sonic goods-tons of tone and a palette of hip sounds from squeaky clean to hi-gain shred and everything in between. This all-tube amp is a beast that delivers many different sound styles. The Screamer amp head comes complete with a bit of technical wizardry, which you'll find useful where it counts most-out there in the real world of rehearsing and gigging.

Among these features are a Lo/Hi Gain switch, which in effect doubles your choice of channels from 2-Clean and Lead-to 4-the afore-mentioned, plus Crunch and Heavy Lead. And then there's the ingenious feature "VLS": an adapted version of the extremely popular and highly practical Master A/B switching circuit found on high-end Engl heads. Quality components, excellent workmanship and strict quality control ensure that the Screamer 50 amp head retains its value.

Engl Screamer 50 50W Guitar Amp Head Specifications:

• Rated power: approx. 50 watts at 8 or 16 ohms
  
  Tubes
• V1 (input-tube): ECC 83/12AX7, FQ Grade
• V2, V3: ECC 83/12AX7, selected
• V4: ECC 83/12AX7, standard
• V5, V6: 5881 (6L6GC) matched set
  
  Fuses
• External: 1 AT (slow) at 230 volts; 2 AT (slow) in the 100 and 120 volt models
• Internal: 1,25 AT (slow) at 230 volts; 2,5 AT (slow) in the 100 and 120 volt models
  
  Power consumption: 155 watts max.
• Dimensions: 58 x 27 x 27 cm
• Weight: 39.6 lbs. (18 kg)

Engl Screamer 50 50W Guitar Amp Head Features:

• Lo/Hi Gain switch
• Four channels
• Two different connection systems

Order today with the protection of our 45-day lowest price and total satisfaction guarantees