Creamy tube tone and silky spring reverb.

This all-tube beast is your first choice for many different sound styles! With a host of practical features and a clearly arranged control panel, handling this amp is a piece of cake. The Screamer's opulent visuals are certainly arresting, but its unique, creamy tube tone and silky spring reverb truly set this amplifier apart. The Screamer comes complete with a bit of technical wizardry which you'll find useful where it counts most: out there in the real world of rehearsing and gigging. Among these features are a Lo/Hi Gain switch, which in effect doubles your choice of channels from 2-Clean and Lead-to 4- wit the addition of Crunch and Heavy Lead settings. You also get 2 different connection systems for footswitches: conventional 1/4" jacks as well as a port for the ENGL compact footswitch Z-5 (sold separately).

If you want to play smashing rock with tamed gain, this should be the amp of your choice. Killing tube tone and incredible handling ease are the trademarks of this amp line. Sparkling clean, harmonic crunch and powerful leads are the goodies you'll get from the Screamer.

Engl Screamer 50W 1x12 Guitar Combo Amp Specifications:

• Rated power: approx. 50W at 8 or 16 ohms
  
  Tubes
• V1 (input-tube): ECC 83/12AX7, FQ Grade
• V2, V3: ECC 83/12AX7 selected
• V4: ECC 83/12AX7 standard
• V5, V6: 5881 (6L6GC) matched set
  
  Fuses
• External: 1 AT (slow) at 230 volts; 2 AT (slow) in the 100 and 120 volt models
• Internal: 1,25 AT (slow) at 230 volts; 2,5 AT (slow) in the 100 and 120 volt models
  
  Power consumption: 155 watts max.
• Dimensions: 58 x 48 x 27 cm
• Weight: 49 lbs. (22 kg)

Pure all-tube tone with modern control and versatility.

One of the most versatile combo amps yet, the improved Engl Sovereign amp is available here as a 1 x 12 combo. 4 channels of finest Engl tube sounds, switchable via MIDI, won't leave any doubt that you can take the pure tube tone into small clubs or on the bigger stages worldwide. No compromise craftmanship, equipped with Accutronics spring reverb and Celestion speakers stress the top-of-the-line quality. Modern punchy bottom end sounds in a handy format.

This sophisticated guitar amp marries the unrivaled tone of all-tube technology to the awesome sound-shaping might of control features powered by state-of-the-art microchip circuitry. This elegant combination puts at your fingertips a vast range of great fundamental tones and an all but inexhaustible reservoir of compelling variations, all of which may be controlled remotely via MIDI.

Engl Sovereign 100W 1x12 Guitar Combo Amp Specifications:

• Output power: approx. 100 watts, adjusted accordingly to 4, 8 and 16 ohms
  
  Input sensitivity levels
• Input: from -20 dB, nominal, max. 0 dB
• Effect Return: from -20 dB nominal, max. 0 dB
  
  Output levels
• SEND, level range: from -20 dB to approx. 0 dB max.
• Frequ.Comp. Line Out: max. +12 dB (balanced), +6 dB (unbalanced)
  
  Power consumption: approx. 330 watts max.
  
  Fuses
• External at 230/240 mains voltage: 2 ATL, internal: 2,5 ATL (T: slo-blo)
• External at 100/115/120 mains voltage: 4 ATL, internal: 5 ATL (T: slo-blo)
  
  Tubes
• V1, V2, V3, V4: 6L6GC or 5881, matched sets
• V5: ECC83 FQ, input tube
• V6, V7: ECC83 selected
• V8: ECC83 standard
  
  Logic control system
• Processor, software: AT89C52 microcontroller with internal 8K Flash Memory for software source code, upgradeable with external Programmer
• Memory: EEPROM 93C66 for data retention
  
  System interfaces
• MIDI: Asynchronous data protocol according to the MIDI standard; MIDI program changes 0-127; MIDI channels 1-16; MIDI controller 7 (main volume, value 0-5 = Master Volume Mute, Mute, value > 5 = default Master Volume level
• Serial Amp Control: Proprietary ENGl asynchronous data protocol
  
  Cooling: two fans each 12 volts DC - 1,2 watts
  
  Dimensions: 58 x 48 x 27 cm
• Weight: approx. 29 kg

Engl Sovereign 100W 1x12 Guitar Combo Amp Features:

• Four Channels: Clean, Crunch, Lead I and Lead II
• Two Gain options
• Two dedicated and specially tuned voicing sections
• Large spring reverb
• Two effect loops
• Two each poweramp Master knobs
• Balanced, frequency-compensated XLR line output
• MIDI In and Thru ports
• 128 MIDI presets
• Three different remote interface ports
• Noise Gates
• Two fans for cooling

More channels, 2 of everything else, and MIDI control with 128 presets. And it's a tube amp! Order today.

Pure all-tube tone with sophisticated modern control for versatility.

One of the most versatile combo amps yet, the improved Engl Sovereign Guitar Amp is available here as a 2 x 12 combo. 4 channels of finest Engl tube sounds, switchable via MIDI, won't leave any doubt that you can take the pure tube tone into small clubs or on the bigger stages worldwide. No compromise in craftmanship, it is equipped with Accutronics spring reverb and Celestion speakers for top-of-the-line quality. Modern punchy bottom end sounds in a handy format.

This sophisticated guitar amp marries the unrivaled tone of all-tube technology to the awesome sound-shaping might of control features powered by state-of-the-art microchip circuitry. This elegant combination puts at your fingertips a vast range of great fundamental tones and an all but inexhaustible reservoir of compelling variations, all of which may be controlled remotely via MIDI.

Engl Sovereign 100W 2x12 Guitar Combo Amp Specifications:

• Output power: approx. 100 watts, adjusted accordingly to 4, 8 and 16 ohms
  
  Input sensitivity levels
• Input: from -20 dB, nominal, max. 0 dB
• Effect Return: from -20 dB nominal, max. 0 dB
  
  Output levels
• SEND, level range: from -20 dB to approx. 0 dB max.
• Frequ.Comp. Line Out: max. +12 dB (balanced), +6 dB (unbalanced)
  
  Power consumption: approx. 330 watts max.
  
  Fuses
• External at 230/240 mains voltage: 2 ATL, internal: 2,5 ATL (T: slo-blo)
• External at 100/115/120 mains voltage: 4 ATL, internal: 5 ATL (T: slo-blo)
  
  Tubes
• V1, V2, V3, V4: 6L6GC or 5881, matched sets
• V5: ECC83 FQ, input tube
• V6, V7: ECC83 selected
• V8: ECC83 standard
  
  Logic control system
• Processor, software: AT89C52 microcontroller with internal 8K Flash Memory for software source code, upgradeable with external Programmer
• Memory: EEPROM 93C66 for data retention
  
  System interfaces
• MIDI: Asynchronous data protocol according to the MIDI standard; MIDI program changes 0-127; MIDI channels 1-16; MIDI controller 7 (main volume, value 0-5 = Master Volume Mute, Mute, value > 5 = default Master Volume level
• Serial Amp Control: Proprietary ENGl asynchronous data protocol
  
  Cooling: two fans each 12 volts DC - 1,2 watts
  
  Dimensions: 58 x 48 x 27 cm
• Weight: approx. 29 kg

Engl Sovereign 100W 2x12 Guitar Combo Amp Features:

• Four Channels: Clean, Crunch, Lead I and Lead II
• 2 Gain options
• 2 dedicated and specially tuned voicing sections
• Large spring reverb
• 2 effect loops
• 2 each poweramp Master knobs
• Balanced, frequency-compensated XLR line output
• MIDI In and Thru ports
• 128 MIDI presets
• Three different remote interface ports
• Noise Gates
• Two fans for cooling

More channels, 2 of everything else, and MIDI control with 128 presets. And it's a tube amp! Order today

Sweet sound and amazing MIDI control possibilities!

This Special Edition Engl head delivers a universe of sound from a single amp head, optimized for the next generation of ambitious guitar players. 6 basic sounds and 24 switchable sound options to store 128 MIDI presets. From crystal clean to smooth iazz, from Texas crunch to pounding rock, from fat metal punch to screaming leads. 100 watts of mega-power. It doesn't get much better.

Engl Special Edition 100W Guitar Amp Head Specifications:

• Output power: approx. 100 watts in Hi Power mode, adjusted accordingly to 4, 8 and 16 ohms; approx. 50 watts in Lo Power mode adjusted accordingly to 4, 8 and 16 ohms
  
  Input sensitivity
• Input: from -20 dB, nominal, max. 0 dB
• Effect Return: from -20 dB nominal, max. 0 dB
  
  Output level
• SEND, level range: from -20 dB to approx. 0 dB max.
• Frequ.Comp. Line Out: +6 dB max.
  
  Power consumption: approx. 390 watts max., equipped
• with 6L6GC power tubes
  
  Fuses
• External at 230/240 mains voltage: 2 ATL (2 amps slo-blo)
• External at 100/115/120 mains voltage: 4 ATL (4 amps slo-blo)
• Internal: 2 x 2.5 ATL (2 amps slo-blo)
  
  Tubes
• V1, V2, V3, V4: 6L6GC (factory loaded) or EL34, matched sets
• V5: ECC83 FQ, input tube
• V6, V7: ECC83 selected
• V8, V9: ECC83 standard
  
  Logic control system: AT89C52 microcontroller with internal 8K Flash Memory for Processor
• Software: software source code; Upgradeable with external Programmer
  
  System interfaces
• MIDI: Asynchronous data protocol according to the MIDI standard; MIDI program changes 0 - 127; MIDI channels 1 16; MIDI controller 7 (main volume), value 0-5 = Master Volume Mute, Mute, value > 5 = default, Master Volume level
  
  Serial Amp Control: Proprietary ENGL asynchronous data protocol
• Dimensions: 71 x 28 x 29 cm
• Weight: 26 kg

Engl Special Edition 100W Guitar Amp Head Features:

• Tube Driver circuit for effect devices
• Also serves as a separate 5th channel that can be selected directly (with or without EQ)
• Modern and Classic sound-shaping buttons determine the basic voicing of all 4 channels,
• 2 gain variants for each of the basic channels: Gain Boost and Hi Gain
• 3 voicing sections: one EQ for Clean and Crunch (Main Channel 1), one for Lead I and Lead II (Main Channel 2) and another for the Tube Driver
• Every channel sports a dedicated Treble knob
• Various sound-shaping buttons tuned to match the tonal requirements of the given channels
• Large spring reverb with separate knobs for the 2 Main Channels
• 3 effect loops: FX Loop I and FX Loop II are variable, switchable effect loops, while Serial FX Loop is a separate circuit that can be used in series with 2 main effect loops
• Each effect loop may be activated for each channel as well as for the Tube Driver circuit
• 2 each power amp Master and Presence knobs, accessible via MIDI
• Variable MIDI-switchable power amp output (50 or 100 watts) with hot impedance adjustment
• A/B speaker switching with separate impedance selector for connected speaker systems
• Balanced, frequency-compensated XLR line output for routing preamp or power amp signals to mixers or recording gear
• MIDI In and Thru ports serve to integrate the amp into a MIDI system
• 128 MIDI presets, accessible via 16 MIDI channels
• Offers three different remote interface ports: Serial Amp Control Port accepts the Custom Z-9 Footswitch (sold separately); the MIDI In accepts the Z-9 for use as a simple MIDI footcontroller or any other MIDI footcontroller
• Amp is equipped with a stereo jack that takes a dual footswitch allowing you to switch the four channels remotely
• Programmable Noise Gate for suppressing noise in the Crunch, Lead I, and Lead II channels

Order today and have the most technologically advanced guitar amp available.

Plentiful power, near endless sound shaping options, and cool stage looks!

The Engl Special Edition amp head has the same features as the 6L6 power amp version, but produces 100 watts with EL 34 power amp tubes cutting through any music style. More punch and dynamics in the upper midrange. Shimmering blue lights inside give it a great look on darkened stages. This amp head is the perfect choice for the demanding guitarist.

Engl Special Edition 100W Guitar Amp Head (EL34) Specifications:

• Output power: approx. 100 watts in Hi Power mode, approx. 50 watts in Lo Power mode adjusted accordingly to 4, 8 and 16 ohms, adjusted accordingly to 4, 8 and 16 ohms
  
  Input sensitivity
• Input: from -20 dB, nominal, max. 0 dB
• Effect Return: from -20 dB nominal, max. 0 dB
  
  Output level
• SEND, level range: from -20 dB to approx. 0 dB max.
• Frequ.Comp. Line Out: +6 dB max.
  
  Power consumption: approx. 390 watts max., equipped with 6L6GC power tubes
  
  Fuses
• external at 230/240 mains voltage: 2 ATL (2 amps slo-blo)
• External at 100/115/120 mains voltage: 4 ATL (4 amps slo-blo)
• Internal: 2 x 2.5 ATL (2 amps slo-blo)
  
  Tubes
• V1, V2, V3, V4: 6L6GC (factory loaded) or EL34, matched sets
• V5: ECC83 FQ, input tube
• V6, V7: ECC83 selected
• V8, V9: ECC83 standard
  
  Logic control system: AT89C52 microcontroller with internal 8K Flash Memory for Processor
• Software: software source code; Upgradeable with external Programmer
• Memory: EEPROM 93C66 for data retention
  
  System interfaces
• MIDI: Asynchronous data protocol according to the MIDI standard, MIDI program changes 0 127, MIDI channels 1 16, MIDI controller 7 (main volume), value 0-5 = Master Volume Mute, Mute, value > 5 = default, Master Volume level
  
  Serial Amp Control: Proprietary ENGL asynchronous data protocol
• Dimensions: 71 x 28 x 29 cm
• Weight: 26 kg

Engl Special Edition 100W Guitar Amp Head (EL34) Features:

• Tube Driver circuit for effect devices, also serves as a separate fifth channel that can be selected directly (with or without EQ) in reciprocation with the four channels
• Modern and Classic sound-shaping buttons determine the basic voicing of all four channels, giving you a broader, deeper tonal spectrum to work with
• Two Gain variants for each of the basic channels: Gain Boost and Hi Gain let you have to different gain settings for every channel
• Three voicing sections: one EQ for Clean and Crunch (Main Channel 1), one for Lead I and Lead II (Main Channel 2) and another for the Tube Driver. Every channel sports a dedicated Treble knob
• Various sound-shaping buttons tuned to match the tonal requirements of the given channels: Bright and Ultra Bright for Clean and Crunch, Contour and Mid Edge for the two Lead channels
• Large spring reverb for very natural-sounding reverb, with separate knobs for the two Main Channels
• Three effect loops: FX Loop I and FX Loop II are variable, switchable effect loops, while Serial FX Loop is a separate circuit that can be used in series with two main effect loops. Each effect loop may be activated for each channel as well as for the Tube Driver circuit
• Two each power amp Master and Presence knobs, accessible via MIDI. The amp can also be muted via MIDI controller 7
• Variable, MIDI-switchable power amp output (50 or 100 watts) with hot impedance adjustment (that is, on the fly)
• A/B speaker switching with separate impedance selector for connected speaker systems
• Balanced, frequency-compensated XLR line output for routing preamp or power amp signals to mixers or recording gear
• MIDI In and Thru ports serve to integrate the amp into a MIDI system
• 128 MIDI presents, accessible via 16 MIDI channels
• Offers three different remote interface ports: Serial Amp Control Port accepts the Custom Z-9 Footswitch (sold separately); MIDI In accepts the Z-9 for use as a simple MIDI footcontroller or any other MIDI footcontroller; amp is equipped with a stereo jack that takes a dual footswitch, allowing you to switch the four channels remotely
• Programmable Noise Gate for suppressing noise in the Crunch, Lead I and Lead II channels

Order today with the protection of our 45-day lowest price and total satisfaction guarantees

Designed by a guitar legend to deliver screaming sustain and versatile midrange EQ.

The Steve Morse Signature Amp Head features a 3-channel amp concept including a 100 Watt EL 34 power amp section. Channel One can also deliver sparkling clean sounds to support Steve's awesome finger picking technique, but be aware: Channel One can also deliver fat crunch sounds since it has more gain than you would expect from a standard clean Channel. Channel Two features pure rock sound, designed to respond fast. Well dressed midrange and gain structures will let you cut through any mix. Channel Three gives you the most intense sounds you might have heard so far.

The new ENGL MID CONTROL MATRIX was perfectly designed to give a maximum of midrange control options. Four midrange controls that interact with each other plus a tone switch that can be used in conjunction with the controls give the player 8 different midrange sounds to choose from. The overall Hi / Lo gain switch allows the 3 channels to be played in two different gain modes which will support 6 available gain structures at a glance. Combined with the amp features that made ENGL an industry standard, like MIDI Control, integrated Noise Gate, 2 FX Loops, Tube Protection and outstanding German craftsmanship, the Steve Morse Signature amp will be the perfect sound machine for dedicated guitarists and tone gurus — just like Steve Morse.

Engl Steve Morse Signature 100 E 656 100W Tube Guitar Amp Head Specifications:

• Preamp:
• 3 Channels
• 3 band EQ for Channel 1 & 2
• ENGL MID CONTROL MATRIX with 8 different Midrange voicings
• separate Gain & Volume controls for each channel
• Hi / Lo Gain switch with global access
• Tone switch with global access
• Noise Gate with Threshold adjust
• 2 parallel FX loops programmable via MIDI
• 4 x ECC 83 / 12 AX 7 preamp tubes
• Tuner Out activated via Standby switch
  
  Master Section:
• 100 Watts (4 EL 34 tubes)
• Master A / B switch
• Presence & Depth Punch control for power amp sound shaping
• Electronic Tube Protection circuit and power-tube monitoring system
  
  Outputs:
• MIDI IN/THRU
• ENGL Z-9 Foot-switch
• 2 x 1/4" jacks
• Z-4 Foot-switch
• 2 x FX Send
• 2 x FX Return
• 2 x FX Balanced Outs
• 2 x 4, 2 x 8, 1 x 16 Ohms
• (speaker)
  
  MIDI programmable functions:
• Channel switching,
• Master FX Loop 1 / 2,
• Noise Gate,
• Amp Mute
  
  Dimensions & Weight: 71 x 27 x 29 cm, 21 kg

Engl Steve Morse Signature 100 E 656 100W Tube Guitar Amp Head Features:

• 3-channels
• 100 Watt (EL34) power amp
• Engl Mid Control Matrix
• MIDI Control
• Integrated Noise Gate
• 2 FX Loops
• Tube Protection outstanding German craftsmanship

Save BIG when you buy today!

Designed by a guitar legend to deliver screaming sustain and versatile midrange EQ.

The Steve Morse Signature Amp Head features a 3-channel amp concept including a 100 Watt EL 34 power amp section. Channel One can also deliver sparkling clean sounds to support Steve's awesome finger picking technique, but be aware: Channel One can also deliver fat crunch sounds since it has more gain than you would expect from a standard clean Channel. Channel Two features pure rock sound, designed to respond fast. Well dressed midrange and gain structures will let you cut through any mix. Channel Three gives you the most intense sounds you might have heard so far.

The new ENGL MID CONTROL MATRIX was perfectly designed to give a maximum of midrange control options. Four midrange controls that interact with each other plus a tone switch that can be used in conjunction with the controls give the player 8 different midrange sounds to choose from. The overall Hi / Lo gain switch allows the 3 channels to be played in two different gain modes which will support 6 available gain structures at a glance. Combined with the amp features that made ENGL an industry standard, like MIDI Control, integrated Noise Gate, 2 FX Loops, Tube Protection and outstanding German craftsmanship, the Steve Morse Signature amp will be the perfect sound machine for dedicated guitarists and tone gurus — just like Steve Morse.

Engl Steve Morse Signature 100 E 656 100W Tube Guitar Amp Head - Scratch 'n' Dent Specifications:

• Preamp:
• 3 Channels
• 3 band EQ for Channel 1 & 2
• ENGL MID CONTROL MATRIX with 8 different Midrange voicings
• separate Gain & Volume controls for each channel
• Hi / Lo Gain switch with global access
• Tone switch with global access
• Noise Gate with Threshold adjust
• 2 parallel FX loops programmable via MIDI
• 4 x ECC 83 / 12 AX 7 preamp tubes
• Tuner Out activated via Standby switch
  
  Master Section:
• 100 Watts (4 EL 34 tubes)
• Master A / B switch
• Presence & Depth Punch control for power amp sound shaping
• Electronic Tube Protection circuit and power-tube monitoring system
  
  Outputs:
• MIDI IN/THRU
• ENGL Z-9 Foot-switch
• 2 x 1/4" jacks
• Z-4 Foot-switch
• 2 x FX Send
• 2 x FX Return
• 2 x FX Balanced Outs
• 2 x 4, 2 x 8, 1 x 16 Ohms
• (speaker)
  
  MIDI programmable functions:
• Channel switching,
• Master FX Loop 1 / 2,
• Noise Gate,
• Amp Mute
  
  Dimensions & Weight: 71 x 27 x 29 cm, 21 kg

Engl Steve Morse Signature 100 E 656 100W Tube Guitar Amp Head - Scratch 'n' Dent Features:

• 3-channels
• 100 Watt (EL34) power amp
• Engl Mid Control Matrix
• MIDI Control
• Integrated Noise Gate
• 2 FX Loops
• Tube Protection outstanding German craftsmanship

Save BIG when you buy today!

Dynamic tube tone and operational simplicity.

The beauty of this all-tube Thunder Combo guitar amp is rooted in simplicity. With its uncluttered, sensibly arrayed control features, it gives you everything you need to quickly and easily dial in first-class sound-that unmistakable warm, creamy and extremely dynamic tube tone ENGL is known for. Quality components, excellent workmanship and strict quality control ensure this amp will retain its value.

Engl Thunder 50W 1x12 Guitar Combo Amp with Reverb Specifications:

• Rated power: approx. 50 watts at 8 or 16 ohms
  
  Tubes
• V1 (input-tube): ECC 83/12AX7, FQ Grade
• V2, V3: ECC 83/12AX7 selected
• V4: ECC 83/12AX7 standard
• V7, V8: 5881 (6L6GC) matched set
  
  Fuses
• External: 1,25 AM (medium) at 230 volts; 2,5 AM (medium) in the 100 and 120 volt models
• Internal: 1,6 AT (slow) at 230 volts; 3,15 AT (slow) in the 100 and 120 volt models
  
  Dimensions: 29"W x 17-3/4"H x 10"D
• Weight: 49 lbs. (22 kg)

Engl Thunder 50W 1x12 Guitar Combo Amp with Reverb Features:

• 50W into 8 or 16 ohms
• 3 channels
• Master volume
• Reverb
• 12" speaker

Order the Thunder Combo today and fall in love with your tone.

Sweet tube tone and a super-smart control layout for intuitive control.

With its uncluttered, sensibly arrayed control features, the Engl Thunder comes complete with everything you need to dial in first-class sound. Handling couldn't be easier. With the Thunder amp head, what you see is truly what you get-great looks, great sound. Quality components, excellent workmanship and strict quality control ensure this amp head retains its value.

Engl Thunder 50W Guitar Amp Head Specifications:

• Rated power: approx. 50 watts at 8 or 16 ohms
  
  Tubes
• V1 (input-tube): ECC 83/12AX7, FQ Grade
• V2, V3: ECC 83/12AX7 selected
• V4: ECC 83/12AX7 standard
• V7, V8: 5881 (6L6GC) matched set
  
  Fuses
• External: 1.25 AM (medium) at 230 Volts; 2.5 AM (medium) in the 100 and 120 volt models
• Internal: 1.6 AT (slow) at 230 volts; 3.15 AT (slow) in the 100 and 120 volt models
  
  Dimensions: 53 x 25 x 25 cm
• Weight: 30.8 lbs. (14 kg)

Engl Thunder 50W Guitar Amp Head Features:

• 50 watts
• Three channels
• Master volume

Order today with the protection of our 45-day lowest price and total satisfaction guarantees

Maximum punch!

Compared to the Thunder Reverb, the Thunder Drive has an additional Crunch volume control, to give the guitarist access to all 3 channels. A very punchy 50W workhorse that uses a 12" Celestion Vintage 30 speaker.

All-tube guitar amp, fully loaded with all key features. Next to its sonic qualities, the beauty of this amp is rooted in simplicity. With its uncluttered, sensibly arrayed control features, the Thunder makes it easy to dial in first-class sounds. The latest in a line of classy amps, the Engl Thunder delivers that unmistakable ENGL sound-warm, creamy and extremely dynamic tube tone. Quality components, excellent workmanship and strict quality control ensure high performance and durability.

Engl Thunder Drive 50W 1x12 Guitar Combo Amp Specifications:

• Rated power: approx. 50 watts at 8 or 16 ohms
  
  Tubes
• V1 (input-tube): ECC 83/12AX7, FQ Grade
• V2, V3: ECC 83/12AX7 selected
• V4: ECC 83/12AX7 standard
• V7, V8: 5881 (6L6GC) matched set
  
  Fuses
• External: 1,25 AM (medium) at 230 volts; 2,5 AM (medium) in the 100 and 120 volt models
• Internal: 1,6 AT (slow) at 230 volts; 3,15 AT (slow) in the 100 and 120 volt models
  
  Dimensions: 53 x 45 x 25 cm
• Weight: 49 lbs. (22 kg)

Engl Thunder Drive 50W 1x12 Guitar Combo Amp Features:

• 3 channels
• Additional Crunch volume control
• 12" Celestion Vintage 30 speaker

Order today and see what real crunch is all about.

2U power amp with depth boost control and 100-watts per channel.

A new dimension of power, 2 built-in rack units featuring the Engl sound trademarks to discover new sonic experiences. 100 watts per side, 6L6GC driven including adjustable Depth Boost for low punch sounds and eternal headroom to power your rack system.

Engl Tube 100W Stereo Poweramp Specifications:

• Rated power: approx. 2 x 100 watts
• Outlet impedance each channel: 4, 8, and 16 ohms
  
  Input Sensitivity
• Gain Lo: -10 dBV max. 10. dBV
• Gain Hi: -25 dBV max. -5 dBV
  
  Tubes
• V1, input tbe, both channels: ECC83/12AX7 selected
• V2, phase splitter left channel: ECC83/12AX7 standard
• V3, phase splitter right channel: ECC83/12AX7 standard
• V4-V7, power tubes left channel: 6L6GC, matched set
• V8-V11 power tubes right channel: 6L6GC, matched set
  
  Fuses and Power consumption
• AC Mains: 230 volts and 240 volts, 2,5 ATL (slow blow); 100 volts and 120 volts, 5 ATL (slow blow)
• Power Tube Fuses: 4 x 315 mAM (medium blow)
  
  Power consumption: approx. 650 VA, max.
• Dimensions: 19", 2 rack spaces, depth: 350mm (including handles: 390mm)
• Weight: approx. 17 kg

Engl Tube 100W Stereo Poweramp Features:

• Gain Lo/Hi
• A and B volume controls on each left and right stereo channel
• Sound Set circuit
• Impedance-matched 4-, 8-, and 16-ohm speaker outputs
• Dedicated standby switches
• Two safety systems

This power amp is the perfect base to build your wall of sound.

A serious competitor in the premium amp market, at a fraction of the price!

The Blues Custom 30 combo takes the competition down at the knees with pro performance and features at a phenomenally low price. Dual-channel 30W AB operation (pentode), or 15W Class A operation (triode) plus independent or interactive tone controls and specially designed Lady Luck 12" speakers by Eminence are impressive enough on paper, but when you hear the tonal quality and feel the organic interactivity, you won't believe your ears. The tube rectifier provides bluesy sag while tube-driven reverb sounds incredibly natural. 3-band EQ plus added mid control on the hot channel lets you dial in hard-hitting definition. 12AX7 preamp tubes with DC powered filaments operate very quietly.

Epiphone Blues Custom 30 Watt 2x12 Combo Amp Features:

• Designed and engineered in the USA by Gibson
• 30W Class AB or 15W Class A switchable All-tube circuitry
• 2 channels
• (pentode/triode)
• Tube rectifier
• Mid control for channel 2
• Dual 12" special-design Eminence Lady Luck speakers
• Tube-powered reverb
• Independent/interactive EQ switch
• Standby switch
• Shared 3-band EQ
• Master volume
• Dual 4 ohm, dual 8 ohm, and 16 ohm speaker outs
• 12AX7 preamp tubes with DC powered filaments
• 5881 power tubes
• High-tension fuse
• 16-gauge bent and spot-welded chassis
• 11-ply plywood cab construction
• 2-button footswitch not included

We had one of these at headquarters for review and everybody who plugged into it loved it! Order yours today.

An awesome no-frills amp!

Single-ended Class A electronics in a funky retro cabinet! 5W push the 8" speaker to surprisingly loud volumes. Crank up your guitar's volume pot to achieve seriously musical distortion.

Epiphone Valve Junior Combo Amp Features:

• 5W
• Single-ended Class A electronics
• 8" speaker

An ideal practice amp that doesn't cost an arm and a leg! Call or click to order today!

Boutique Class A performance meets Epiphone affordability!

Part of Epiphone's Valve series of tube guitar amps, the Valve Junior Head is a straight-forward, single-ended Class A tube amp. This head version of the Epiphone Valve Junior tube guitar amp includes features not found in its combo cousin. It has DC filaments for both the preamp and power sections to reduce unwanted filament hum. It also has 4, 8, and 16 ohm speaker outputs so you can drive any kind of guitar speaker, from a single 8" box to a 4x12" cab. Simple to operate, it delivers fabulous tube tone from singing to searing with a simple twist of the volume knob. Like the combo version, the Epi Valve Junior Head delivers 5W power with one 12AX7 tube in the preamp and an EL84 in the power amp. Sports stylish vintage-style red and black vinyl covering with white piping and a cream front panel.

Epiphone Valve Junior Head Tube Guitar Amplifier Features:

• 5W power
• Single-ended Class A tube circuit
• 12AX7 preamp tube
• EL84 power amp tube
• Tubes have DC filaments for reduced noise
• Single chicken-head volume knob
• 4, 8, 16 ohm outputs for speaker flexibility

Costs less than a good overdrive pedal and delivers twice the tone! Authentic screaming tube distortion is just a click away! Order yours now!

Versatile enough and toneful enough for Edward Van Halen

The EVH 5150 III HD is a professional all-tube amplifier head that was developed to meet the exacting specifications of Edward Van Halen, one of the true living legends of rock guitar. The 5150III™ amp head's flexible feature set allows creation of tones from clean to crunch to full-out distortion, inspiring limitless artistic expression. Truly roadworthy, EVH® amp heads feature no-compromise construction promising peak performance for years to come. Available in black or ivory.

EVH 5150 III HD Guitar Amp Head Specifications:

• COVERING: Textured vinyl covering (black or ivory), EVH® striped metal grille
• WEIGHT: 55 lbs. (25 kg)
• DIMENSIONS:
• Height 10.25" (26 cm)
• Width: 29.75" (75.5 cm)
• Depth: 11.5" (29.3 cm)
• OUTPUT: 100 watts RMS
• TUBES: Four 6L6 output tubes, eight 12AX7 preamp tubes
• SHIPPING WEIGHT: 60 lbs. (27.2 kg) including packaging
• INTRODUCED: July 1, 2007
• FOOTSWITCH: Four-button footswitch included (P/N 007-0926-000)

Order today and play like Eddie.

Fender Tubes are back! Same high quality, same great price!

Fender hand-selects these 12AT7 single amp tubes for premium-quality tone and long life.

Fender 12AT7 Single Amp Tube Features:

• Premium tone
• Long life
• Great price

Your amp tone is only as good as your tubes. Don't be lazy, order today.

Fender Tubes are back! Same high quality, same great price!

Hand-selected for premium-quality tone and long life.

Fender 12AX7A 7025 Single Tube Features:

• Premium tone
• Long life
• Great price

Your amp tone is only as good as your tubes. Don't be lazy, order today.

A limited edition of 300.

The Fender '57 Amp is a limited-edition 12W, hand-wired tube amplifier with a 12" audio speaker, housed in a stunning split-grille cabinet with all-new hardware and black "piano lacquer" finish.

The original Tweed Deluxe amp of the 1950s is well known as being one of the finest tone machines ever devised. Fender has taken that platform to another level by using the extremely desirable Celestion Alnico Blue speaker in an all-new custom-designed maple speaker cabinet with all-new knobs, handle, and other hardware. Each amp includes a Leather Collectors' Portfolio containing Certificate Of Authenticity, designer's notes, factory photos, and other surprises.

Fender fans & collectors will have to move fast as there will only be 300 of these amps built! Guitarists who want a beautifully appointed tube amp for home or studio and tube amp enthusiasts who appreciate the unique qualities of hand wired, hand-built models will be absolutely thrilled with the Fender '57 Amp. American designed, American made!

Original late '50s hand-wired 12W 5E3 circuit is one of the most touch-sensitive, dynamic amp sounds of all time; manageable volume level for studio or small venue; natural compression adds sustain, even at clean settings.

Solid maple cabinet gives the tone a natural wood resonance with a strong fundamental.

Groove Tubes 12AX7 preamp tubes provides sensitive, higher-gain tone; user may install a 12AY7 for the original lower-gain sound, if desired.

Celestion Alnico Blue speaker is one of the most complex-sounding speakers ever; powerful and sensitive, it sounds nice and sparkly clean at low volume settings, then "barks" when you hit it hard.

Fender '57 Combo Amp Specifications:

• Type: Tube Amplifier
• Output: 12 Watts
• Ohms: 8 Ohms
• Speakers: One 12 Inch Celestion Alnico Blue Speaker (P/N 007-3313-000)
• Channels: Two (Instrument And Microphone)
• Weight: 36 Lbs (16.3 Kg)
• Dimensions:
• Height: 18.75" (48 Cm)
• Width: 20" (51 Cm)
• Depth: 9.5" (24 Cm)
• Tubes 2-12AX7
• 2-GT6V6
• 1-5Y3

Fender '57 Combo Amp Features:

• Hand-wired all-tube circuitry on eyelet board
• Late 1950s 5E3 circuit produces about 12 Watts
• Matched pair of Groove Tubes GT6V6 output tubes
• 5Y3 rectifier tube contributes to compression and "sag" when amp is played hard
• Two 12AX7 preamp tubes, one of which may be substituted with a 12AY7 for the original '50s lower-gain sound, if desired
• Mic and Instrument channels; Each channel has individual volume controls and High & Low inputs
• 12" Celestion Alnico Blue speaker
• Dovetail-joined solid Maple cabinet
• Black "Piano Lacquer" finish
• Holographic diamond-cut "57" badge on front of amp; "One of only 300" badge on rear panel
• Premium heavy-knurl "Roll-Easy" Telecaster knobs with engraved "57" logo
• Solid aluminum speedboat handle; metal hex-head screws throughout
• Blue jewel light
• Meguiar's Mist & Wipe Kit includes finish enhancer spray and cloth
• Custom embroidered plush padded cover is included
• Leather Collectors' Portfolio contains Certificate Of Authenticity, designer's notes, factory photos, and other assorted collectors items
• Only 300 will be made for the world, throughout 2007

Be one of the lucky few - order today!

An authentic re-creation of one of the most beloved guitar amplifiers of all time!

The Fender '57 Deluxe Combo Amp is a 12W hand-wired tube amplifier with a 12" speaker. Super cool and timeless, the lower settings of the "chicken head" volume control result in harmonically rich clean sound perfect for authentic vintage rock, blues, and country playing; when cranked up, the Deluxe amp's fat, compressed, wildly distorted tone is not only inspiring, but just plain fun. It also records easily, thanks to all that natural compression. American design, American made!

Guitarists who want a moderately powered tube amp for home, studio, or small gigs will fall in love with the '57 Deluxe; tube amp enthusiasts who appreciate the unique qualities of hand-wired, hand-built models and Fender fans & collectors will consider the '57 Deluxe a must-have!

The original Fender Deluxe amp of the 1950s was a medium-powered unit designed to let guitarists "hold their own" in a small group. As blues, Western, and rockabilly bands began getting louder and wilder, the overdriven tone of a cranked-up Deluxe found its way onto countless smokin' hot live and recorded performances. Over the past five decades, from Memphis to Liverpool to Texas, players of every conceivable style have employed this awesome tone machine for its unmistakable warm, rich tube tone.

Original late '50s hand-wired 12W 5E3 circuit is one of the most touch-sensitive, dynamic amp sounds of all time; manageable volume level for studio or small venue; natural compression adds sustain, even at clean settings.

Solid pine cabinet gives the tone a warm, natural wood resonance.

Groove Tubes 12AX7 preamp tubes provide sensitive, higher-gain tone; user may install a 12AY7 for the original lower-gain sound, if desired.

Jensen P-12Q Alnico-magnet speaker is the same model as used in many of the originals; sounds nice and sparkly clean, then "barks" when you hit it hard.

Fender 57 Deluxe 12W 1x12 Combo Amp Specifications:

• Type: Tube Amplifier
• Output: 12 Watts
• Ohms: 8 Ohms
• Speakers: One 12 Inch, Alnico-Magnet, Jensen P-12q Speaker (P/N 007-3312-000)
• Channels: Two (Instrument And Microphone)
• Features: Hand-Wired All-Tube Circuitry On Eyelet Board
• Covering: Genuine Lacquered Tweed
• Weight: 25 Lbs (11.5 Kg)
• Dimensions: Height: 16.75" (43 cm)
• Width: 20" (51 cm)
• Depth: 9.5" (24 cm)
• Power Hndlg.: N/A
• Tubes: 2-12AX7
• 2-GT6V6
• 1-5Y3GT

Fender 57 Deluxe 12W 1x12 Combo Amp Features:

• Leather strap handle
• Controls: Instrument Volume, Mic Volume, Master Tone
• Pine enclosure
• Covering: Genuine Lacquered Tweed
• Hand wired

Get an original - get this amp! Call or click today to order.

This gorgeous all-tube combo amp is completely hand-wired using premium components.

The Fender '57 Twin Tweed Combo Amp effectively reproduces the 1955-1957 edition's low-powered 5E8A circuit, which produces 40W into a pair of 12" Alnico-magnet speakers. Its harmonically rich, clean tones are great for authentic rock, blues, and country playing. When cranked up, the Twin-Amp's fat, sophisticated distortion tone works wonderfully in many modern musical situations.

The '57 Twin-Amp gets its power from a pair of USA-made GT6L6-GE output tubes. The power supply includes Fender's rarely seen '50s dual rectifier arrangement, which uses two - 5U4 rectifier tubes. With this design, power amp compression, or sag, is more subtle than it is in many Fender Tweed designs. The preamp contains four high-gain 12AX7 tubes, three of which may be substituted with 12AY7s for the original '50s low-gain sound, if desired. There's also an internal bias pot that allows easy substitution of various 6L6 tube types.

Control panel details include Normal and Bright volumes, 4 Inputs (2 Normal, 2 Bright), Treble, Bass, and Presence knobs.

The '57 Twin's finger-joined solid pine cabinet resonates with a warm, woody tone. The amp is covered in genuine lacquered tweed, and a vintage brown/gold grille cloth and leather strap handle complete a very vintage package. Fitted cover is included.

Fender 57 Twin-Amp Tweed Combo Amp Specifications:

• 25"W x 21"H x 10-1/2"D
• 44 lbs.

Fender 57 Twin-Amp Tweed Combo Amp Features:

• '55-'57 5E8A circuit design
• Hand-wired chassis
• 40W tube power
• 2 - 12" Special Design Ted Weber/Eminence Alnico magnet speakers
• Solid finger-jointed pine cabinet
• Genuine lacquered tweed
• Striped oxblood grille cloth
• Leather strap handle
• Controls: Presence, Bass, Treble, Volume (Bright Channel), Volume (Normal Channel)
• Dual channels (Normal and Bright)
• Chrome control panel
• 4 inputs (2 per channel)
• Standby switch
• Internal bias pot
• Dual rectifiers
• 4 x 12AX7 (preamp)
• 2 x GT6L6-GE (power section)
• 2 x 5U4 (rectifier)

You've never had anything this cool with this much righteous tone. Get out the card and order today.