A super-versatile rig featuring the Marshall Vintage Modern 2266 Tube Amp Head!

This Marshall full stack includes one 2266 amp head, one 425A angled speaker cab, and one 425B straight speaker cab.

Marshall Vintage Modern 2266 Tube Amp Head
This head is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.
Two frequency selective Pre-amp Volumes (Gains)-Body and Detail-facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.
A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.
Finally, a series FX loop is provided for those players who wish to use outboard effect to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.
The cosmetics are also a carefully crafted hybrid of old and new styles-made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 425A & 425B 4x12 Extension Speaker Cabinets
These cabinets are traditional Marshall 4 x 12 speaker cabs in design. These cabs are mono/stereo switchable and are loaded with G12C 25 Watt Celestion Greenbacks. These were specifically developed for the Limited Edition Jimi Hendrix Super100JH stack and are voiced to give that rich and balanced harmonic timbre that complements vintage tone and the Vintage Modern Series perfectly.
The cosmetics are also a carefully crafted hybrid of old and new styles-made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2266, 425A and 425B Full Stack Specifications:

• Marshall Vintage Modern 2266 Tube Amp Head
• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230mm)
• Weight: 39.6 lbs. (18 kg)
  
  Marshall Vintage Modern 425A & 425B 4x12 Extension Speaker Cabinets
• Dimensions: 30.5" x 30" x 14.5" (770 x 755 x 365mm)
• 425A weight: 79 lbs. (36 kg)
• 425B weight: 81.5 lbs. (37 kg)

Marshall Vintage Modern 2266, 425A and 425B Full Stack Features:

• Marshall Vintage Modern 2266 Tube Amp Head
• 50-watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp
• Master Volume with two Gain Controls-Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England
  
  Marshall Vintage Modern 425A & 425B 4x12 Extension Speaker Cabinets
• 100-watt cabinets
• Loaded with Celestion G12C 25 Greenbacks
• Mono or Stereo switchable
• 16 ohms/4 ohms mono
• 8 ohms stereo
• Birch ply construction
• "finger-locking" joints
• Made in England

Make an investment in your sound that will pay dividends for years to come. Order now with the protection of our 45-day lowest price and total satisfaction guarantees

The real screamin' deal!

This all-tube Marshall 1959SLPX tone machine cranks out fabulous lead distortion and tight crunch exactly like the original model from the 1967 to 1969 era. Inspired by Pete Townshend's unquenchable thirst for VOLUME, this guitar amp head features 100W of power from 4 EL34s and 3 ECC83s in the preamp — the exact configuration of the original. True bypass series FX loop, 3-band EQ, and presence control.

Marshall 1959SLPX Vintage Series 100W Tube Head Features:

• 100W
• 4 EL34s in the power stage
• 3 ECC83s in the preamp
• True bypass series FX loop
• 3-band EQ
• Presence control

This is the original head-cutting head. Make it yours and make history.

If you're looking for the perfect marriage of classic, vintage rock tones with modern feature and levels of gain, your search is over!

This half stack includes the Marshall Vintage Modern 2266 Tube Amp Head and Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet.

Marshall Vintage Modern 2266 Tube Amplifier Head
The Marshall Vintage Modern 2266 50 Watt Head is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effect to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.

The cosmetics on the Marshall 2266 amp head are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet
The Marshall Vintage Modern 425A angled cab and 425B straight guitar speaker extension cabinets are traditional Marshall 4 x 12 speaker cabs in design. These cabs are mono/stereo switchable and are loaded with G12C 25 Watt Celestion Greenbacks. These were specifically developed for the Limited Edition Jimi Hendrix Super100JH stack and are voiced to give that rich and balanced harmonic timbre that complements vintage tone and the Vintage Modern Series perfectly.

The cosmetics on the Marshall speaker cab are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2266 and 425A or 425B Half Stack Features:

• Marshall Vintage Modern 2266 Tube Amp Head
• 50-Watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England
• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
• Weight: 39.6 lbs (18 kg)
  
  Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet
• 100-Watt, 4x12" cabinet
• Angled front
• Loaded with Celestion G12C 25 Greenbacks
• Mono or Stereo switchable
• 16 Ohms/4 Ohms mono
• 8 Ohms stereo
• Birch ply construction
• "finger-locking" joints
• Made in England
• Impedance
• Mono 16 Ohms/4 Ohms
• Stereo 8 Ohms/8 Ohms
• Dimensions 30.5" x 30" x 14.5" (770 x 755 x 365 mm)
• Weight
• 425A: 79 lbs. (36 kg)
• 425B: 81.5 lbs (37 kg)

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

Classic tube tone from the days of huge guitar!

The all-valve JCM800 2203 is one of the most highly respected 100W Marshall heads in the company's long history. Evolving from the legendary Plexi head, it was one of the first Marshall amps to feature a master volume control. The essence of simplicity, the JCM800 is a one-channel, all-valve amp with no reverb or effects. Its easy control panel, distinctive roar, and larger-than-life edge immediately set the standard by which all other rock amps were judged and it remained the industry benchmark throughout the entire 16 years of its production life. Now it's back by popular demand and just like the 1959SLP and 1987X it has a Series Effects Loop with true bypass that takes the loop completely out of the circuit ensuring the original tone isn't compromised in any shape or form.

Marshall JCM800 2203 Vintage Series 100W Tube Head Specifications:

• 100W
• 30"W x 9"H x 12"D
• 41 lbs.

Marshall JCM800 2203 Vintage Series 100W Tube Head Features:

• 4 EL34s in the power stage
• 3 ECC83s in the preamp
• True bypass series FX loop
• 3-band EQ
• Presence control

Talent and a lot of hard work can get you far, but if you want to play like the big boys, you've got to play what the big boys play. Order today and get serious.

A vintage reissue of the highly sought after 1970's blue-line SVT head.

With the new SVT-VR, the Ampeg engineering and product development teams had one primary goal-get as close to the coveted tone of the classic SVT as possible. As a result, the preamp stage, power section, and even the rocker switches of the new SVT-VR emulate the exact signal path, tone, and vibe of the original.

The all-tube, 300-watt SVT-VR amplifier is driven by a total of six 6550 power tubes for massive power and tone. In addition to the '70s style dials and rocker switches, the SVT-VR's preamp circuitry has been faithfully re-created to match the original.

Ampeg SVT-VR Vintage Reissue 300 Watt SVT Amp Head Features:

• 300W
• 2-channel preamp
• 6 - 6550 power tubes
• Original power amp output spec and tube complement
• Original preamp signal path
• Original blue-line graphics and cosmetics
• Original EQ rocker switches
• XLR output
• Slave out

The signature sonics and looks of the original. Order now!

Real all-tube vintage flavor from the original maker.

The Marshall 1987XL Vintage Series 50W Tube Head gives you all the fabulous tube tone of the original 1987X from the 1966 to 1969 era plus a true bypass series FX loop. 3 ECC83 tubes in the preamp and 2 EL34s in the power section dish out that delicious, nasty overdrive behind Hendrix, Townshend, and scores of other greats. 3-band EQ and presence controls provide all the tweakage necessary to get the most out of this classic screamer.

Marshall 1987XL Vintage Series 50W Tube Head Specifications:

• 26"W x 8"H x 10"D
• 34 lbs.

Marshall 1987XL Vintage Series 50W Tube Head Features:

• 50W of classic all-tube power
• 3 ECC83 tubes in the preamp
• 2 EL34s in the power section
• 3-band EQ
• Presence control

To get the real sound, go for the real deal. Order today!

The perfect marriage of classic, vintage rock tones with modern features.

The Marshall Vintage Modern 2266C 50 Watt 2 x 12 is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility of tonal shaping for individual guitars and styles while the power amplifier is heavily based on the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effect to further enhance their sound. Loop levels of 10dB and +4dB are catered for via rear panel switch as well as the option to completely bypass this feature if it is not required.

The Combo comes fitted with two Celestion G12C 25 Watt greenback speakers enabling stand-alone performance. There is a facility for using an extension cab if required.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2266 Tube Combo Amp Specifications:

• Dimensions: 27" x 22-1/2" x 10-1/2" (690 x 570 x 270 mm)
• Weight: 66 lbs. (30 kg)

Marshall Vintage Modern 2266 Tube Combo Amp Features:

• 50-Watt valve 2x12" combo
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Celestion G12C 25 Greenbacks*
• Made in England
  
  *Note: the speakers developed especially for the Limited Edition Jimi Hendrix Super100JH stack

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

If you're looking for the perfect marriage of classic, vintage rock tones with modern features and levels of gain, your search is over!

The Marshall Vintage Modern 2466 Tube Amp Head is an all-valve amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with four KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effects to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2466 Tube Amp Head Specifications:

• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
• Weight: 49.6 lbs (22.5 kg)

Marshall Vintage Modern 2466 Tube Amp Head Features:

• 100-Watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 4 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

If you're looking for the perfect marriage of classic, vintage rock tones with modern feature and levels of gain, your search is over!

The Marshall Vintage Modern 2266 50 Watt Head is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effect to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2266 Tube Amp Head Specifications:

• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
• Weight: 39.6 lbs (18 kg)

Marshall Vintage Modern 2266 Tube Amp Head Features:

• 50-Watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

If you're looking for the perfect marriage of classic, vintage rock tones with modern features and levels of gain, your search is over!

The Marshall Vintage Modern 2466 Tube Amp Head is an all-valve amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with four KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.

Finally, a series FX loop is provided for those players who wish to use outboard effects to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 2466 Tube Amp Head - Scratch 'n' Dent As Is Specifications:

• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
• Weight: 49.6 lbs (22.5 kg)

Marshall Vintage Modern 2466 Tube Amp Head - Scratch 'n' Dent As Is Features:

• 100-Watt valve head
• Valve compliment: 4 x ECC83 (12AX7s) in preamp, 4 x KT66 in power amp
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Made in England

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

Relive the legend!

The Fender '65 Super Reverb Combo Amp is a long overdue addition to Fender's Vintage Reissue series. Here's a faithful re-creation of the legendary and highly collectible Blackface Super Reverb from the 1960s. This 45W, all-tube combo with 4 x 10" Jensen speakers, tube reverb, and vibrato has long been considered one of the best amps to "crank up" for unmiked club gigs or on the concert stage. The all-time bluesy, funky rocker! Includes 2-button footswitch.

Fender Vintage Reissue 65 Super Reverb Guitar Combo Amp Specifications:

• 25-1/4"W x 25"H x 10-1/2"D
• 65 lbs.

Fender Vintage Reissue 65 Super Reverb Guitar Combo Amp Features:

• All-tube 45W @ 2 ohms
• 4 x 10" Jenson speakers
• 2 footswitchable channels
• Reverb and vibrato

Order today and enjoy the quintessential Fender sound of this classic amp.

Crank up the 'verb and get swept away in the classic sounds loved from the California beaches to the Grand Ol' Opry.

The Fender '65 Twin Reverb Amp is an authentic all-tube reproduction of the original classic! One of the cleanest tube amps ever, or crank it for slight crunch. Delivers 85W through two Jensen 12s. Has 2 channels, tube vibrato, tube spring reverb, tilt-back legs, and Blackface cosmetics. Includes 2-button footswitch. Order the optional Fender amp cover to protect your investment (see accessory box on this page).

Fender Vintage Reissue 65 Twin Reverb Guitar Amp Features:

• Original all-tube circuitry
• 85 watts
• 2 Jensen 12" speakers
• 2 channels
• Tube vibrato
• Tube spring reverb
• 2-button footswitch
• Blackface cosmetics
• 26-1/2"W x 20"H x 10-1/2"D
• 64 lbs.

You don't have to wait any longer for genuine Twin tube sound. Make your move today.

A decades-long favorite of bassists AND guitarists.

The straightforward Fender 59 Bassman outperforms most of the fancy amps on the market today. In the 1950s, the Bassman was perfect for amplifying that new invention, the Fender Precision Bass. This 50W rig allowed the bass to hold its own onstage with drums, electric guitars, and miked piano, the common instrumentation of the day. Over the years, it also won the hearts of guitarists who, after experimenting with all kinds of preamps and effects racks, found its simplicity, great tone, excellent dispersion, and touch-sensitive dynamics a true pleasure. This reissue is true to the original while adding several enhancements: U.S.-made GT-6L6 output tubes, improved 12AX7 preamp tubes, and an internal bias pot, making it easier to experiment with other output tubes. It also features a genuine lacquered tweed covering, solid finger-jointed pine cabinet, and an original-spec 4AR4 rectifier tube for natural compression when you play hard. Includes fitted cover.

Fender Vintage Reissue '59 Bassman LTD Features:

• True to the original '59 Bassman design
• 50W
• 4 - 10" speakers
• Finger-jointed pine cabinet
• Genuine lacquered tweed covering
• New US-made GT-6L6 output tubes
• Improved 12AX7 preamp tubes
• Original spec 5AR4 rectifier tube
• Internal bias pot has been added to adjust for other tubes
• Fitted cover is included

Fender Vintage Reissue '59 Bassman LTD Includes:

• fitted cover

A classic, chosen by bassists, guitarists, and harp players over decades. Get it now and love it.

If you're looking for the perfect marriage of classic, vintage rock tones with modern features, your search is over!

The Marshall Vintage Modern 425A angled cab and 425B straight guitar speaker extension cabinets are traditional Marshall 4 x 12 speaker cabs in design. These cabs are mono/stereo switchable and are loaded with G12C 25 Watt Celestion Greenbacks. These were specifically developed for the Limited Edition Jimi Hendrix Super100JH stack and are voiced to give that rich and balanced harmonic timbre that complements vintage tone and the Vintage Modern Series perfectly.

The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.

Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet Specifications:

• Impedance
• Mono 16 Ohms/4 Ohms
• Stereo 8 Ohms/8 Ohms
• Dimensions 30.5" x 30" x 14.5" (770 x 755 x 365 mm)
  
  Weight
• 425A: 79 lbs. (36 kg)
• 425B: 81.5 lbs (37 kg)

Marshall Vintage Modern 425A or 425B 4x12 Extension Speaker Cabinet Features:

• 100-Watt, 4x12" cabinet
• Angled front
• Loaded with Celestion G12C 25 Greenbacks
• Mono or Stereo switchable
• 16 Ohms/4 Ohms mono
• 8 Ohms stereo
• Birch ply construction
• "finger-locking" joints
• Made in England

Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going and be totally satisfied or your money back!

Rivera K412 V30 speaker enclosures are ruggedly built with Finland birch plywood for years of road use, and are fitted with Celestion 8-ohm Vintage 30 speakers, standard.

Get the sound you need. Call or click now to order.

The ultimate club amp for blues, rock, or country.

The Fender '65 Deluxe Reverb Combo Amp is big enough to cut through the muddiest mix, but small enough to turn up and wail in small clubs. This makes it the perfect studio amp as well. You'd be surprised how many of your classic favorites were recorded with a Deluxe Reverb. Crank up this faithful, U.S. made reissue for your daily requirement of fat Fender tone. Delivers 22W through a 12" speaker. Features 2 channels (normal, vibrato), all-tube circuitry, tube vibrato, tube spring reverb, Blackface cosmetics, and 2-button footswitch.

Protect your investment with an optional genuine Fender cover. (See the accessory box on this page.)

Fender Vintage Reissue 65 Deluxe Reverb Guitar Combo Amp Specifications:

• 17-1/2"W x 24-1/2"H x 9-1/2"D
• 42 lbs.

Fender Vintage Reissue 65 Deluxe Reverb Guitar Combo Amp Features:

• 22W tube power
• 12" speaker
• 2 channels
• Spring reverb
• Made in the U.S.

Save BIG when you buy today!

Revel in its classic tube tone and waves of vintage 'verb!

The Fender 65 Princeton Reverb Amp is an authentic all-tube reproduction of the original classic! The Princeton Reverb amplifier delivers 15W through one 10" Jensen Special Design speaker. This single-channel amplifier favorite has 2 inputs, reverb and vibrato effects with an included footswitch, and control knobs for Treble, Bass, Reverb, Speed, and Intensity. The tube complement consists of 3 - 12AX7s, a 12AT7, 2-Groove Tubes 6V6s, and 1 - 5AR4 rectifier tube. Covered with tough vinyl, the Fender 65 Princeton Reverb amp comes with a cover.

Fender Vintage Reissue '65 Princeton Reverb Guitar Combo Amp Specifications:

• Weight: 34 lbs.
• Dimensions: 19-7/8"W x 16"H x 9-1/2"D

Fender Vintage Reissue '65 Princeton Reverb Guitar Combo Amp Features:

• Amp Type: Vintage Reissue Series Tube Amp
• Output: 15 watts into 8 ohms
• Tubes: 3 x 12AX7, 1 x 12AT7, 2 x Groove Tubes 6V6, 1 x 5AR4 rectifier tube
• Speaker: 1-10" Jensen Special Design C-10R
• Channel: 1 channel (2 inputs)
• Controls: Volume, Treble, Bass, Reverb, Speed, Intensity
• Effects: Reverb, Vibrato
• Covering: Black textured vinyl

Fender Vintage Reissue '65 Princeton Reverb Guitar Combo Amp Includes:

• Cover and footswitch

You don't have to wait any longer for genuine tube sound. Make your move today.

Nail any tone you want and amplify it with classic Celestion sound.

The B-52 ST-6012 60W Tube 2x12 Guitar Combo Amp with Celestion Vintage 30's has a 100% all-tube signal path that combines Sovtek 6L6 power tubes with 12AX7 preamp tubes for solid tube tone and classic breakup. This B-52 combo amp is capable of monstrous gain, extreme distortion, and sparkling clean tones through 2 channels. All those tones are accurately reproduced by a pair of 12" Celestion Vintage 30s with 70W handling. The Clean and Overdrive channels have their own sets of volume and EQ controls (3-band bass, mid, and treble), with 2 gain knobs and an interactive Contour control (Gain 2) on the Overdrive channel.

You can further shape your tone by selecting 3 rectifier settings. The solid-state setting delivers the tightest low-end definition and fastest attack. Tube A gives you a vintage attack and feel with the warmest sound. Tube AB1 is in between the first two: punchy, warm, sound with more definition than Tube A. B-52 made the ST-6012 combo amp roadworthy with 13-ply Baltic birch construction.

B-52 ST-6012 60W Tube 2x12 Guitar Combo Amp with Celestion Vintage 30 s Features:

• 60W all-tube amplifier
• 1/4" input jacks
• 2 - 12" Celestion Vintage 30s (70W handling)
• Overdrive channel with Gain 1, Gain 2 with contour, 3-band EQ, and volume
• Clean channel with Volume and 3-band EQ
• Master volume and Reverb
• Push switch for channel and gain select
• Headphones line out
• Rugged foot switch for channel select, reverb on/off and gain select
• Effects send and return with level controls
• Line out with level control
• Selectable external speaker jacks
• Ground lift switch
• Rectifier select switch for Tube A, Tube AB1, or Solid-State
• 27"W x 21"H x 11"D
• 73 lbs.

A combo you can play anywhere and can easily craft any tone you want. Order now.

Power to handle any sound and play any club.

The heart and soul of the B-52 ST-412 280W 4x12 Guitar Cabinet are 4 Celestion Vintage 30 speakers. The combination of B-52's 25 years of cabinet building know-how and the unrivaled tone of Celestion speakers unite to produce an outstanding and extremely portable 4x12 guitar cabinet. A 16 ohm stereo/8 ohm mono switch is provided for additional flexibility. B-52 uses 13-ply Baltic birch construction, 240W handling, detachable casters, and reinforced corners on the ST-412 guitar cab.

B-52 ST-412 280W 4x12 Guitar Cabinet with Celestion Vintage 30s Features:

• 240W handling
• 4 - 60W Celestion Vintage 30 speakers
• Black grille cloth
• White piping
• 13-ply Baltic birch construction
• Metal handles
• Rubber feet
• Metal corners
• Detachable casters for easy transport
• Large grain black vinyl (matches ST-Series amplifiers)
• Interchangeable gold or chrome logos

Put together a stack capable of serious sound amplification. Order today.

The '63 Fender Reverb is a replica of the original 1963 Fender tube reverb amplifier. Features a solid steel welded chassis and all-tube circuitry. Includes dwell, mix, and tune control. Fender '63 Reverb is brown with tan grille cloth.

Fender Vintage Reissue '63 Reverb Amp Features:

• 6V6 Groove Tube
• 12AX7 preamp tube
• 12AT7 tube
• Dwell, Mix, Tone controls
• On/Off footswitch included
• 10-1/2"H x 18-7/8"W x 7-1/2"D
• 13 lbs.

Save BIG when you buy today!