Now you can get the same great Bass Vector performance in a smaller and more compact package. Combining the low frequency extension that only a 15" driver can achieve with the natural, extended (but not brittle) highs of dual 8" drivers, the Bass Vector 115 cabinet achieves a balance of depth, impact, and definition that makes 4x10s sound lifeless by comparison!

A single active cabinet delivers 600 watts to its speakers. When an additional passive cabinet is connected, the amplifier delivers a total of 1000 watts RMS to the two cabinets. The total system power can be further increased by adding additional active and passive cabinets. There is a limit of one passive cabinet per active cabinet.

The ISP Beta Bass Preamplifier is the ideal head' for the system, or the active cabinet can be used with other bass heads when driven from their line output, and the passive cabinet can be driven from virtually any powered bass head.

The high performance 15" driver is complemented by an advanced cabinet design featuring optimum volume and a large, deep tuned port. This helps to minimize the non-linear behavior and reduced low frequency output that small ports produce. The cabinet is tour grade with Baltic birch plywood construction, dadoed joints, extremely durable rubberized polyurethane finish, metal handle, and casters.

ISP Technologies Bass Vector 115 Passive Cabinet Specifications:

• LF Driver: 1 x 15 inch, large excursion, 450 watt RMS.
• HF Drivers: 2 x 8 inch, high sensitivity, 250 watt RMS.
• Sensitivity: 98 dB @ 100 Hz, 102 dB @ 1KHz (1 Watt at 1 meter).
• SPL: 125 dB at 1 meter, long term. 129 dB at 1 meter, peak.
• Frequency Range: 35 Hz to 5 KHz (-10 dB).
• Freq. Response: 45 Hz to 4 KHz (+- 3 dB).
• Power Required: 5 Amps x 120 VAC typical, 10 Amps max.
• Construction: Baltic birch plywood, extensively braced.
• Finish: Rubberized polyurethane.
• Dimensions: 30" W x 19-1/4" H x 18-3/4" D (without casters).
• Weight: Active: 104 Lbs., Passive: 89 Lbs.

ISP Technologies Bass Vector 115 Passive Cabinet Features:

• High-performance bass guitar cabinet with one 15" woofer and dual 8" midrange drivers in line array topology
• Smaller and lighter-weight than the 18" version but still the same great tone and quality.

Frequency range exceeds the capabilities of a 4x10 cabinet to deliver truly earth-shaking bass. Call or click today to order.

Tired of the limited performance of 4x10 bass cabinets? ISP Technologies has taken a different approach to the modern bass guitar system. Combining the low frequency extension that only an 18" driver can achieve with the natural, extended (but not brittle) highs of dual 8" drivers, the Bass Vector speaker cab achieves a balance of depth, impact, and definition that makes 4x10's sound lifeless by comparison. At low frequencies, a single Bass Vector exceeds the output of a typical 4x10 cabinet by 4dB or more at 40 Hz.

A single powered cabinet delivers 600W RMS to it's speakers. When an additional passive cabinet is connected, the amplifier delivers a total of 1000 watt RMS to the two cabinets. The total system power can be further increased by adding additional active and passive cabinets with a limit of 1 passive cab per active cab.

The ISP Beta Bass Preamplifier is the ideal head' for the system, or the active cabinet can be used with other bass heads when driven from their line output, and the passive cabinet can be driven from virtually any powered bass head.

The high performance 18" driver is complemented by an advanced speaker cabinet design featuring optimum volume and a large, deep tuned port. This helps to minimize the non-linear behavior and reduced low frequency output that small ports produce. The ISP Bass Vector is tour grade, with Baltic Birch plywood construction, dadoed joints, extremely durable rubberized polyurethane finish, metal handles, and casters.

ISP Technologies Bass Vector Active Cabinet Specifications:

• LF Driver: 1 x 18 inch, large excursion, 650 watt rms.
• HF Drivers: 2 x 8 inch, high sensitivity, 250 watt rms total.
• Sensitivity: 98 dB @ 100 Hz, 102 dB @ 1KHz (1 Watt at 1 meter).
• SPL: 126 dB at 1 meter, long term. 130 dB at 1 meter, peak.
• Frequency Range: 29 Hz to 5 KHz (-10 dB).
• Freq. Response: 39 Hz to 4 KHz (+- 3 dB).
• Amplifier Power: 1000 W rms, high current DCAT, fan cooled.
• Power Required: 5 Amps x 120 VAC typical, 10 Amps max.
• Construction: Baltic Birch Plywood, extensively braced.
• Finish: Rubberized Polyurethane.
• Dimensions: 30" W x 21.25" H x 24" D (without casters).
• Weight: Active: 125 Lbs., Passive: 110 Lbs.

ISP Technologies Bass Vector Active Cabinet Features:

• High performance bass guitar cabinet with one 18-inch woofer and dual 8" midrange drivers in line array topology
• Exceeds the performance of typical 4x10 cabinets by 4 dB or more at 40 Hz at high volumes.
• 1000 Wrms D-CAT amplifier built in (active version).

Call or click today to order.

Tired of the limited performance of your 4x10 bass cabinet? ISP Technologies has taken a different approach to the modern bass guitar speaker system with the Bass Vector Speaker Cab. Combining the low-frequency extension that only an 18" driver can achieve with the natural, extended (but not brittle) highs of dual 8" drivers, the Bass Vector cabinet achieves a balance of depth, impact, and definition that makes 4x10s sound lifeless by comparison. At low frequencies, a single Bass Vector exceeds the output of a typical 4x10 cabinet by 4dB or more at 40Hz.

The high performance 18" driver is complemented by an advanced cabinet design featuring optimum volume and a large, deep tuned port. This helps to minimize the non-linear behavior and reduced low-frequency output that small ports produce. The cabinet is tour-grade, with Baltic birch plywood construction, dadoed joints, extremely durable rubberized polyurethane finish, metal handles, and casters.

ISP Technologies Bass Vector Passive Cabinet Specifications:

• LF Driver: 1 x 18 inch, large excursion, 650 watt rms.
• HF Drivers: 2 x 8 inch, high sensitivity, 250 watt rms total.
• Sensitivity: 98 dB @ 100 Hz, 102 dB @ 1KHz (1 Watt at 1 meter).
• SPL: 126 dB at 1 meter, long term. 130 dB at 1 meter, peak.
• Frequency Range: 29 Hz to 5 KHz (-10 dB).
• Freq. Response: 39 Hz to 4 KHz (+- 3 dB).
• Amplifier Power: 1000 W rms, high current DCAT, fan cooled.
• Power Required: 5 Amps x 120 VAC typical, 10 Amps max.
• Construction: Baltic Birch Plywood, extensively braced.
• Finish: Rubberized Polyurethane.
• Dimensions: 30" W x 21.25" H x 24" D (without casters).
• Weight: Active: 125 Lbs., Passive: 110 Lbs.

ISP Technologies Bass Vector Passive Cabinet Features:

• High-performance bass guitar cabinet with one 18-inch woofer and dual 8" midrange drivers in line array topology.
• Exceeds the performance of typical 4x10 cabinets by 4dB or more at 40Hz at high volumes

Frequency range exceeds the capabilities of a 4x10 cabinet to deliver truly earth-shaking bass. Call or click today to order.

Tired of the limited performance of 4x10 bass cabinets? With the Bass Vector Pro, ISP Technologies has taken a different approach to the modern bass guitar system. Combining the low frequency extension that only an 18" driver can achieve with the natural, extended (but not brittle) highs of dual 8" drivers, the Bass Vector speaker cabinet achieves a balance of depth, impact, and definition that makes 4x10's sound lifeless by comparison. At low frequencies, a single Bass Vector exceeds the output of a typical 4x10 cabinet by 4dB or more at 40Hz.

A single powered cabinet delivers 600 watts RMS to it's speakers. When an additional passive cabinet is connected, the amplifier delivers a total of 1000 watt RMS to the two cabinets. The total system power can be further increased by adding additional active and passive cabinets with a limit of 1 passive cabinet per active cab.

The ISP Beta Bass Preamplifier is the ideal head' for the system, or the active cabinet can be used with other bass heads when driven from their line output, and the passive cabinet can be driven from virtually any powered bass head.

The high performance 18" driver is complemented by an advanced speaker cabinet design featuring optimum volume and a large, deep tuned port. This helps to minimize the non-linear behavior and reduced low frequency output that small ports produce. The Bass Vector Pro is tour grade, with Baltic Birch plywood construction, dadoed joints, extremely durable rubberized polyurethane finish, metal handles, and casters.

ISP Technologies Bass Vector Pro Active Cabinet Specifications:

• LF Driver: 1 x 18 inch, large excursion, 650 watt rms.
• HF Drivers: 2 x 8 inch, high sensitivity, 250 watt rms total.
• Sensitivity: 98 dB @ 100 Hz, 102 dB @ 1KHz (1 Watt at 1 meter).
• SPL: 126 dB at 1 meter, long term. 130 dB at 1 meter, peak.
• Frequency Range: 29 Hz to 5 KHz (-10 dB).
• Freq. Response: 39 Hz to 4 KHz (+- 3 dB).
• Amplifier Power: 1000 W rms, high current DCAT, fan cooled.
• Power Required: 5 Amps x 120 VAC typical, 10 Amps max.
• Construction: Baltic Birch Plywood, extensively braced.
• Finish: Rubberized Polyurethane.
• Dimensions: 30" W x 21.25" H x 24" D (without casters).
• Weight: Active: 125 Lbs., Passive: 110 Lbs.

ISP Technologies Bass Vector Pro Active Cabinet Features:

• High performance bass guitar cabinet with one 18-inch woofer and dual 8" midrange drivers in line array topology
• Exceeds the performance of typical 4x10 cabinets by 4 dB or more at 40 Hz at high volumes.
• 1000 Wrms D-CAT amplifier built in (active version).

Experience the speaker performance you've always dreamed of. Call or click today to order.

Light weight yet powerful, Deep End speaker cabinets are built with a 15mm-thick single wall cabinet construction and Plywood Baffle Boards to provide the right amount of responsive cab flex. The Deep End DE115 is rated at 250 watts and is loaded with one 15-inch Heavy Duty Kustom bass speaker.

Kustom Deep End Series 115 1x15" Bass Speaker Cabinet Features:

• 250 Watts Power Handling
• One 15-inch KustomDE115 Cabinet Specifications Heavy Duty Speaker
• Plywood Baffle Board
• 3" x 3" Tweeter
• Single Wall, 15mm Cabinet Construction

Get the right speaker cabinet for your bass amp. Order today!

The Deep End DE200HD is a fan-cooled, 200-watt RMS amplifier with the necessary power and headroom to excel in a wide range of environments. Housed in a double rack-mount head format, it provides a 6-Band Active EQ, Preamp Gain and Volume controls, a built-in Limiter, an Effects Loop with Send and Return jacks and a Line Out jack.

Kustom Deep End Series 200HD Bass Head Features:

• 200 Watts RMS Output
• Preamp Gain & Volume Controls
• Input Clip Indicator
• 6-Band Active EQ
• Built-In Limiter
• Effects Loop (Send & Return Jacks)
• Direct Out (XLR)
• Line Output (1/4-inch)
• Two Speaker Output Jacks

You can't afford to pass on this one - order today!

Light weight yet powerful, Deep End speaker cabinets are built with a 15mm-thick single wall cabinet construction and Plywood Baffle Boards to provide the right amount of responsive cab flex. The DE410 is rated at 400 watts and provides four, 10-inch Heavy Duty Kustom® bass speakers.

Kustom Deep End Series 410 4x10" Bass Speaker Cabinet Features:

• 400 Watts Power Handling
• Four 10-inch Kustom® Heavy Duty Speakers
• Plywood Baffle Board
• 3" x 3" Tweeter
• Single Wall, 15mm Cabinet Construction

Get the right speaker cabinet for your bass amp. Order today!

The Groove Bass 115C takes the passion and performance of the mighty Groove 1200 HD and distills it down to a powerful 1x15 format. The result is a bass combo that turns heads and will redefine the way that you think about combo amps.

The 115C delivers a full 600 watts straight into one 15-inch Eminence speaker. Everything about the 115C is maximized for power and tone. For example, you'll notice that the cabinet itself is deeper than usual. The result is increased punch and low-end depth. Think about most stages in clubs: you've got depth beside your drummer, but not much width on that stage. Why not design your bass combo to take advantage of that depth? Using the laws of speaker cabinet design, the Groove Bass' deeper cabinet dimension generates low end that is simply missing from most combo amps.

The Groove 115C has the same functions as the Groove 1200 HD: the Active/Passive input switch, 9-Band Graphic EQ, tone controls with EQ Shift toggles, etc. Speakers are exclusive designs from Eminence and built in the USA. A compression horn handles the high end and includes its own Volume Attenuator on the back of the cabinet. Output connectors are Speak-On and the cabinet itself is made of 18mm plywood with spring-loaded handles, a heavy vinyl covering and protective corners.

When you need great tone and big muscle in a smaller, more compact package, a Groove Bass combo is just what the doctor ordered.

Kustom Groove 115C Bass Combo Amp Features:

• RMS Wattage: 600 w/Internal Speaker
• Speaker: 15" Eminence
• Compression Horn: 1" Eminence
• Horn Attenuator: Variable
• Input Config.: Active/Passive Selector
• Gain/Master Volumes: Yes
• Active Master EQ: 9-Band
• Effects Loop: Send & Return
• EQ Controls w/Shift: Bass, Mid and High
• Output Connectors: Speak-On
• Additional Functions: Mute/Boost Output
• Cabinet: 18mm Plywood
• Handles: Spring Loaded
• Casters: Removable
• Footswitch: Mute/Boost
• Dimensions (in): 19"W x 31.5"H x 20"D
• Dimensions (mm): 798H x 483W x 508D
• Weight: 106 lbs/ 48 kg

Order today and make your presence felt.

Groove Bass speaker cabinets are an important element of the "Groove Bass Sound." Featuring drivers that are crafted exclusively for the Groove Bass by Eminence, Groove 215H cabinets generate larger-than-life tones with loads of low-end, but with highs that cut through via its compression horn. That horn has its own volume attenuator on the back of the cabinet. Groove cabinets are conservatively rated to handle 500 watts per cabinet.

Kustom Groove 215H Bass Cabinet Features:

• 700W
• Two 15" US Eminence Speakers
• 8 Ohms
• 1-inch compression horn
• Variable horn attenuator
• 18mm plywood cabinet
• Spring loaded handles
• Transport cart casters
• 46.7 x 24.3 x 20
• 115 lbs / 52 kg

Order today and make your presence felt.

Imagine 1,200 watts being pumped straight into three 310 speakers, with no need for additional speaker cabinets to attain full power. The Groove 310C Bass Combo Amp is a powerful amp. The cabinet itself is taller and deeper than usual and the cumulative result, well, let's just say that General Patton would have been proud.

The Groove 310C has the same functions as the Groove 1200 HD: the Active/Passive input switch, 9-Band Graphic EQ, tone controls with EQ Shift toggles, etc. Speakers are exclusive designs from Eminence and built in the USA. A compression horn handles the high end and includes its own Volume Attenuator on the back of the cabinet. Output connectors are Speak-On and the cabinet is made of 18mm plywood with spring-loaded handles, a heavy vinyl covering and protective corners.

The Groove Bass 310C excels in any environment where tone and power must be matched with a more convenient size. Welcome to the future of Bass. Welcome the Groove 310C.

Kustom Groove 310C Bass Combo Amp Features:

• RMS Wattage: 1200 w/Internal Speaker
• Speakers (x3): 10" Eminence
• Compression Horn: 1" Eminence
• Horn Attenuator: Variable
• Input Config.: Active/Passive Selector
• Gain/Master Volumes: Yes
• Active Master EQ: 9-Band
• Effects Loop: Send & Return
• EQ Controls w/Shift: Bass, Mid and High
• Line Output: XLR w/Pre-Post EQ
• Output Connectors: Speak-On
• Additional Functions: Mute/Boost Output
• Cabinet: 18mm Plywood
• Handles: Spring Loaded
• Casters: Tilt-Back Roller Design
• Footswitch: Mute/Boost
• Dimensions (in): 39.8H x 18.5W x 23.2D
• Dimensions (mm): 1011H x 470W x 589D
• Weight: 138 lbs/ 62.6 kg
  
  

Order today and make your presence felt.

Kustom and John Moyer, acclaimed bassist for the multi-platinum selling band Disturbed, have joined forces to produce this Signature Kustom cab. The John Moyer G-810H-JM bass cabinet is intended for use with Kustom's 1,200-watt Groove Bass 1300HD amp head, and it is built using 8 - 10" U.S.-made Eminence speakers and a 1" Eminience compression horn. This special model features striking artwork on the cabinet's metal grill that was created through a collaboration between the hard-rocking bassist and Kustom's own artists. The result is an 8x10 cabinet that has an awesome sound and look.

Kustom John Moyer G-810H 2000W 8x10" Bass Cabinet Specifications:

• Power handling: 2000W
• Speaker: 10" US Eminence
• Impedance: 4 ohms
• Horn type: 1" Eminence compression horn
• Horn attenuator: Variable
• Cabinet: 18mm plywood
• Dimensions: 47"H x 23.5"W x 20"D
• Weight: 150 lbs.

Kustom John Moyer G-810H 2000W 8x10" Bass Cabinet Features:

• Intended for use with Kustom Groove Bass 1300HD amp head
• Eminence speakers and horn
• Spring loaded handles
• Castor wheels
• Tilt bar
• Cabinet made out of 18mm plywood
• Specially designed artwork on metal speaker grill created by John Moyer and Kustom artists

You don't have to be disturbed to enjoy the sound coming out of this John Moyer Signature bass cab. Order today!

The Kustom John Moyer KBA 16X JM is a 16W practice bass guitar combo amplifier that's great for warming up backstage or for working at home or in the studio.

Kustom and John Moyer, acclaimed bassist for the multi-platinum band Disturbed, have joined forces to produce a series of Signature Kustom amplifiers.

The John Moyer practice amp features customized graphics inspired by John on the cabinet's metal grill, a 4-band active EQ, built-in limiter, Celestion speaker, and an external speaker jack.

Kustom John Moyer KBA16X-JM 16W 1x10" Practice Bass Guitar Amp Specifications:

• RMS wattage: 16W
• Speaker: 8" Celestion
• Dimensions: 13"H x 15.8"W x 10"D
• Weight: 22 lbs.

Kustom John Moyer KBA16X-JM 16W 1x10" Practice Bass Guitar Amp Features:

• 4-band active EQ
• Built-in limiter
• Headphone jack
• Guitar and CD/Tape input
• External speaker jack
• Volume control

Practice makes perfect. Order this 16W combo amp today and get working on your craft.

The KBA 115C features a fan-cooled, 200-watt RMS amplifier. Fan cooling not only protects the amplifier components over time but also permits a lighter overall chassis design. The KBA 115C provides a single-wall cabinet that is loaded with a 15-inch speaker built by Eminence® in the USA. A true Compression Driver handles the high-end work with precision and clarity. The speaker cabinet is constructed with a professional, shelf-style port on the front and large, egg shell-style Kustom carrying handles.

Kustom KBA 115C 1x15" Bass Combo Features:

• 200 Watts RMA Output (Fan Cooled)
• One Eminence® 15-inch Speaker
• Compression Driver
• 6-Band Active EQ
• Preamp Gain & Volume Controls
• Effects Loop w/ Send & Return Jacks
• External Speaker Jack
• Line Out Jack
• Built-In Limiter

Call or click today to order.

The KBA 210C features a fan-cooled, 200-watt RMS amplifier. Fan cooling not only protects the amplifier components over time but also permits a lighter overall chassis design. The KBA 210C provides a single-wall cabinet that is loaded with two, 10-inch speakers that are built by Eminence® in the USA. A true Compression Driver handles the high-end work with precision and clarity. The speaker cabinet is constructed with a professional, shelf-style port on the front and large, egg shell-style Kustom carrying handles.

Kustom KBA 210C 2x10" Bass Combo Features:

• 200 Watts RMA Output (Fan Cooled)
• Two Eminence® 10-inch Speakers
• Compression Driver
• 6-Band Active EQ
• Preamp Gain & Volume Controls
• Effects Loop w/ Send & Return Jacks
• External Speaker Jack
• Line Out Jack
• Built-In Limiter

Call or click today to order.

10W of power drive a Celestion 8" bass driver. 3-band EQ gives you a flexible sound-shaping palette. A built-in headphone jack lets you practice in private!

Kustom KBA10 10-Watt Bass Amp with 8" Speaker Features:

• 10W of power
• Celestion 8" bass driver
• 3-band EQ
• Headphone jack

It's a little amp with a lot of soul - buy it today!

These Line 6 410 LowDown bass speaker cabs feature premium Eminence speakers and a high-frequency compression driver horn for superior tone of the highest definition. The rock-solid and road-ready bass speaker is an ideal match for any bass head. This Line 6 bass cabinet is designed to complement the range of bass amp models delivered by the LowDown HD400 and HD750 bass heads. With its rugged construction and upgraded finish, the Line 6 LowDown 410 bass cabinet will look great behind you onstage at the club, hall, or stadium.

Line 6 LowDown 410 4x10 Bass Speaker Cabinet Specifications:

• Four 10" premium Eminence speakers with a high-frequency compression driver horn and volume control to dial in the just the right amount of high-end articulation
• Dimensions: 29" L x 28" H x 19" D
• Weight: 90 lbs.
• Road-ready removable casters
• 600 watts max
• 8 ohm cab

Give your Lowdown head the voice it needs. Order today!

The Line 6 HD400 rack mount bass head, much like its LD400 Pro combo brother, offers LowDown tone in a powerful, rack-mountable amplifier. Boasting 5 fully adjustable essential tones, including Rock, Clean, R&B, Grind, and Brit, the LowDown HD400 amp head offers pro players uncompromising power, extraordinary versatility, and commanding tonal definition. The Line 6 HD400 bass amp head also comes with a crucial set of 5 effects, including a studio-quality compressor based on the immortal Teletronix LA-2A from the 60's, the Smart Control FX Envelope Filter, Octaver, Chorus, and a full-featured bass Synth with fully adjustable parameters.

The recipe for one great gig after another, night after night, the Line 6 HD400 is a bass amp head that features an array of ins, outs, and hardware like two NL4M-series Speakon speaker outputs, a balanced XLR direct output with exclusive A.I.R. processing, a 1/4" preamp output, an FBV jack, and rock-solid construction specifically designed to withstand life on the road.

Amp Models: Clean
Inspired by the Eden Traveler, this model is all about clean, funk, and fusion bass tone. It'll give you warm lows and punchy highs.

R&B
Inspired by a '68 B-15 Flip Top, this model is a tribute to those clean, fat, bass tones of the late 60's and early 70's. It is the kind of tone you hear on most Motown recordings, as played by the pioneering young bassist James Jamerson.

Rock
This model is inspired by the '74 Ampeg SVT which has appeared on innumerable recordings and arena stages worldwide. Now, all the tone of the head and 300-pound behemoth 8x10 cab is available without having to lookup a chiropractor.

Brit
Based on a '68 Marshall Super Bass, this model delivers the kind of overdriven bass sounds brought to us by late '60s British rock pioneers like Cream and The Who.

Grind
As the name would suggest, this is for the modern rock sound of the late '90s and the new millennium popular in bands like Alice in Chains, Mudvayne, and Rage Against The Machine. Based on a distorted SansAmp PSA-1 into an SVT with a direct clean bass signal mixed in, this model gives you that angry, clear, and punchy aggression that cuts through the mix and takes your sound to DEFCON 1.

Effects models: Compressor
This pro LA-2A-style compressor is ideal for helping every bass player - particularly the ones who play with their fingers - achieve a smooth and consistent signal at any volume.

Envelope filter
Based on a Q-Tron, this envelope filter effect can be heard on tons of major funk and rock tunes.

Octaver
Based on the EBS OctaBass, this effect produces a single note one octave below the note you're playing to add a powerful new vibe to your sound.

Chorus
Based on the much loved T.C. Electronic Chorus, this transparent, smooth, and expressive chorus was built for bass, and using it won't reduce your low end. It's an especially beautiful complement for fretless basses.

Synth
Sitting at the back of the model knob is this secret weapon that turns LowDown into a '70s classic bass synth. From funk to modern rock, this fully adjustable synth delivers incredible tones while tracking every dynamic move you make.

Line 6 LowDown HD400 400W Rack Mount Bass Amp Head Specifications:

• 400W

Line 6 LowDown HD400 400W Rack Mount Bass Amp Head Features:

• 5 bass amp models: Clean, R&B, Rock, Brit, and Grind
• 5 bass effects: dedicated studio-grade Compressor; 3 Smart Control FX including Envelope Filter, Octaver, and Chorus; and a fully adjustable bass Synth
• Deep switch for supreme fatness
• 4 programmable channel memories, 36 with optional FBV Shortboard controller
• Front-panel tuner
• NL4M-series Speakon four-pole mono speaker output for external cabinet
• Balanced XLR direct output with exclusive A.I.R. processing (plug straight into the snake at the gig or into the board at the studio)
• 1/4" preamp output
• Headphone out
• 1/8" CD/MP3 input
• Jack for optional FBV Express or FBV Shortboard foot controllers

Help yourself to a mix of vintage and modern sounds from this versatile bass head. Order today!

The Line 6 HD750 is a bass amp head, that much like its LD400 Pro combo and HD400 amp head brother, offers LowDown tone in a rack-mountable amplifier that gives you 750W (at 4 ohms), 375W (at 8 ohms) of power. The LowDown HD750 has 5 popular, adjustable tones, including Rock, Clean, R&B, Grind, and Brit. The Line 6 HD750 amp head gives working players great power, tons of versatility, and commanding tonal definition. It also comes with a set of 5 crucial effects, including a studio-quality compressor based on the Teletronix LA-2A from the 60's, the Smart Control FX Envelope Filter, Octaver, Chorus, and a full-featured bass Synth with fully adjustable parameters.

The HD750 amp head features great ins, outs, and hardware like two NL4M-series Speakon speaker outputs, a balanced XLR direct output with exclusive A.I.R. processing, a 1/4" preamp output, an FBV jack, and rock-solid construction specifically designed to help it survive the road life.

Amp Models: Clean
Inspired by the Eden Traveler, this model is all about clean, funk, and fusion bass tone. It'll give you warm lows and punchy highs.

R&B
Inspired by a '68 B-15 Flip Top, this model is a tribute to those clean, fat, bass tones of the late 60's and early 70's. It is the kind of tone you hear on most Motown recordings, as played by the pioneering young bassist James Jamerson.

Rock
This model is inspired by the '74 Ampeg SVT which has appeared on innumerable recordings and arena stages worldwide. Now, all the tone of the head and 300-pound behemoth 8x10 cab is available without having to lookup a chiropractor.

Brit
Based on a '68 Marshall Super Bass, this model delivers the kind of overdriven bass sounds brought to us by late '60s British rock pioneers like Cream and The Who.

Grind
As the name would suggest, this is for the modern rock sound of the late '90s and the new millennium popular in bands like Alice in Chains, Mudvayne, and Rage Against The Machine. Based on a distorted SansAmp PSA-1 into an SVT with a direct clean bass signal mixed in, this model gives you that angry, clear, and punchy aggression that cuts through the mix and takes your sound to DEFCON 1.

Effects models: Compressor
This pro LA-2A-style compressor is ideal for helping every bass player - particularly the ones who play with their fingers - achieve a smooth and consistent signal at any volume.

Envelope filter
Based on a Q-Tron, this envelope filter effect can be heard on tons of major funk and rock tunes.

Octaver
Based on the EBS OctaBass, this effect produces a single note one octave below the note you're playing to add a powerful new vibe to your sound.

Chorus
Based on the much loved T.C. Electronic Chorus, this transparent, smooth, and expressive chorus was built for bass, and using it won't reduce your low end. It's an especially beautiful complement for fretless basses.

Synth
Sitting at the back of the model knob is this secret weapon that turns LowDown into a '70s classic bass synth. From funk to modern rock, this fully adjustable synth delivers incredible tones while tracking every dynamic move you make.

Line 6 LowDown HD750 750W Rack Mount Bass Amp Head Specifications:

• 750W (at 4 ohms), 375W (at 8 ohms)

Line 6 LowDown HD750 750W Rack Mount Bass Amp Head Features:

• 5 bass amp models: Clean, R&B, Rock, Brit, and Grind
• 5 bass effects: dedicated studio-grade Compressor; 3 Smart Control FX including Envelope Filter, Octaver, and Chorus; and a fully adjustable bass Synth
• Deep switch for supreme fatness
• 4 programmable channel memories, 36 with optional FBV Shortboard controller
• Front-panel tuner
• NL4M-series Speakon four-pole mono speaker output for external cabinet
• Balanced XLR direct output with exclusive A.I.R. processing (plug straight into the snake at the gig or into the board at the studio)
• 1/4" preamp output
• Headphone out
• 1/8" CD/MP3 input
• Jack for optional FBV Express or FBV Shortboard foot controllers

Get this rackmountable bass head and enjoy experimenting with your sound. Order today!

The Line 6 LowDown LD15 is a bass combo amp that pushes 15 watts through a punchy 8" speaker. The Line 6 LD15 bass amp boasts 4 channels of sought-after LowDown bass tones, 3 brilliant Smart Control FX, and the ability to dial in great sound instantly.

The LowDown LD15 bass combo delivers a wide range of essential sounds for every bass player: Clean provides a pristine fusion- and funk-bass tone perfect for slap; R&B is a tribute to those fat Motown bass tones; Rock captures the seminal tones of classic 8x10 stadium rock amplifiers; and Grind, as the name suggests, supplies plenty of punchy aggression and distortion for that modern rock bass tone. Each amp model's parameters are fully adjustable and can be stored for instant recall at the touch of a button.

The front panel of the LowDown LD15 features 3 Smart Control FX, offering a variety of tonal options unprecedented in a 15-watt bass amplifier. The Filter delivers a funky wah sound inspired by the baddest envelope filter on the planet; Chorus is transparent, smooth, and expressive, but maintains the low-end of the signal; and Octaver, producing a single note one octave below the note played, adds a powerful vibe to any jam.

A dedicated studio-grade opto compressor model provides a smooth and consistent signal at any volume. This consistency is ideal for every bass player for leveling out the dynamics of your attack. An LED lights up to signify when the compressor hits -5dB of gain reduction.

The Line 6 LowDown LD15 offers pro-grade tone control reminiscent of higher-priced bass amplifiers. Broad-sweeping Bass, Lo-Mid, Hi-Mid, and Treble controls make finding the perfect sound a snap. Plus, with a dedicated Drive knob, a little extra character is just a twist away.

Ideal for jamming and practicing, the Line 6 LowDown LD15 bass combo features a CD/MP3 input for playing along to any music. Plus, the headphone output can also be used for easy direct recording of album-ready LowDown bass tones.

Rugged, reliable, and ready to deliver legendary Line 6 bass tone, the LowDown LD15 combo amp is here.

Line 6 LowDown LD15 Modeling Bass Combo Amp Features:

• 15 watts
• 8" speaker
• 4 essential and fully adjustable Line 6 bass models: Clean, R&B, Rock, and Grind
• 4 user-programmable channel memories
• 3 fundamental Smart Control FX for bass: Envelope Filter, Octaver, and Chorus
• Adjustable opto compressor with threshold LED
• Pro bass amp tone control features Bass, Lo-Mid, Hi-Mid, Treble, and Drive knobs
• CD/MP3 input for playing along to any music
• Headphone/recording output ideal for practicing and direct recording

An amazing little amp that will make you love to practice.

The Line 6 LowDown LD150 delivers an incredible array of dialed-in, stage-perfected bass tones with 6 killer bass amp models. It offers incredible sonic flexibility with a modeled vintage studio compressor and critical bass-specific effects. All of that tone is fed into an oversized, high-speed power amp that delivers a truckload of headroom for fantastic articulation and low-end punch through the 12" woofer. 4 programmable channel memories (36 with an optional FBV Shortboard—see accessory box on this page) let you set up your LowDown for the sounds you want. You also get a headphone jack, line in, and a studio-quality XLR direct out with POD-based cab modeling for incredible direct-inject tone. The amp conveniently tilts back for use as a stage monitor.

Line 6 LowDown LD150 Combo Bass Amp Features:

• 150W power
• 1 - 12"
• Tilt-back monitor design
• 6 bass amp models: Clean, R&B, Rock, Brit, Grind, and Synth
• Vintage studio compressor model
• Bass-specific octave, envelope filter, and chorus effects
• Oversized, high-speed power amp
• 4 programmable channel memories (36 with a FBV Shortboard)
• Headphone jack
• Line in
• Studio-quality XLR direct out with POD-based cab modeling

At last, there's a Line 6 bass combo! Order your LowDown today!