Peavey's Tour 410 Bass Cabinet employs weight saving neodymium speaker magnets instead of heavy ferrite, plus ultra-lightweight plywood construction reduces weight even more. It's lighter, but has all the uncompromising power, punch, and tone you've come to expect from Peavey.

Peavey Tour 410 Bass Cabinet Features:

• Lightweight plywood construction
• Durable black Tolex covering
• Classic Peavey "Silver Stripe" cabinet design
• Four 10" high-performance, NEO-powered bass loudspeakers
• One 1" horn tweeter with level control
• 700 watts program power handling
• 8 ohms
• Neutrik and 1/4" speaker jacks in parallel
• 68 lbs.

Your ears will be pleased and so will your back. Order your Tour 410 today.

The Peavey Tour 450 Bass Amp Head offers tons of power plus extensive tone shaping tools, such as bright and low-cut switches, active high and low shelving controls, a contour control, and a 9-band graphic EQ configured to target critical bass frequencies. Its also includes a Peavey-exclusive sub-harmonic generator with level control and footswitchable bypass that adds a note one octave lower than the original note, creating interesting harmonic textures and a significantly enriched bottom end.

The Tour 450 delivers 450W RMS into 4 ohms. SmartRail technology, a new patented Peavey power-amp topology, makes it possible for the Tour Series to deliver its massive dynamic power with increased efficiency and lighter weight.

In addition, the XLR-equipped direct out allows traditional patching to a front-of-house or studio mixer, but features fail-safe phantom power backup that sends a flat signal through the house P.A. or studio console.

Peavey Tour 450 Bass Amp Head Features:

• 450W into 4 ohms (4-ohm minimum load)
• Pre- and post-gain controls
• Bright and and low-cut switches
• Contour control for advanced signal shaping
• Active high and low shelving controls
• Hi boost, low cut
• 9-band constant-Q graphic equalizer with bypass switch
• Analog octave divider with level control
• and footswitchable bypass
• Post-EQ effects loop
• Buffered tuner send jack
• DI XLR output with fail-safe phantom power backup capability
• 2 input jacks for high and low output bases
• Rear-mounted auxiliary input jack

If you want massive bass sound with tonal versatility, the Tour 450 is your rig. Order today.

The Peavey Tour 700 Bass Amp Head offers tons of power plus extensive tone shaping tools, such as bright and low-cut switches, active high and low shelving controls, a contour control, and a 9-band graphic EQ configured to target critical bass frequencies. Its also includes a Peavey-exclusive sub-harmonic generator with level control and footswitchable bypass that adds a note one octave lower than the original note, creating interesting harmonic textures and a significantly enriched bottom end.

The Tour 700 delivers 700W RMS into 4 ohms. SmartRail technology, a new patented Peavey power-amp topology, makes it possible for the Tour Series to deliver its massive dynamic power with increased efficiency and lighter weight.

In addition, the XLR-equipped direct out allows traditional patching to a front-of-house or studio mixer, but features fail-safe phantom power backup that sends a flat signal through the house P.A. or studio console.

Peavey Tour 700 Bass Amp Head Features:

• 700W into 4 ohms (4-ohm minimum load)
• Pre- and post-gain controls
• Bright and and low-cut switches
• Contour control for advanced signal shaping
• Active high and low shelving controls
• Hi boost, low cut
• 9-band constant-Q graphic equalizer with bypass switch
• Analog octave divider with level control
• and footswitchable bypass
• Post-EQ effects loop
• Buffered tuner send jack
• DI XLR output with fail-safe phantom power backup capability
• 2 input jacks for high and low output bases
• Rear-mounted auxiliary input jack
  
  

If you want massive bass sound with tonal versatility, the Tour 700 is your rig. Order today.

The VB-2 is a Peavey bass amplifier head built around a tube power section that uses six EL34 tubes to deliver its stunning 225 watts of power. By adjusting the Clean Gain and Overdrive Gain controls on the footswitchable Clean and Crunch channels, respectively, you can dial in tones ranging from the snarling grit of rock and metal to the weighty thump of old-school dub and reggae to clean, punchy hi-fi-all while delivering the necessary "cut" to maintain a strong bass presence in live performances.

Backing up the amplifier's tube growl is a 3-band EQ that combines the best attributes of passive and active tone controls. This section includes high and low controls, as well as a mid control with a four-position midrange selector switch that allows you to set the mid-frequency shift at 200, 400, 600 or 800 Hz.

Peavey's patented Resonance and Presence controls, which adjust the damping factor at the low and high ends, respectively, along with a three-way speaker impedance selector, enable you to match the VB-2 to virtually any bass speaker enclosure. A footswitchable mute/tuner circuit and front-panel effects loop give players additional flexibility.

Peavey Tour VB-2 Tube Bass Amp Head Features:

• 225 watts of all-tube power from six EL34 pentodes
• Clean and overdrive channels with footswitch selection
• Custom-designed, oversized power and output transformers
• Impedance selector switch for 2, 4 and 8 ohm loads to match any bass cabinet
• Two parallel speaker output jacks
• Two shielded 12AX7 dual triode preamp tubes
• Shielded, 12AT7 cathodyne phase splitter for increased power amplifier dynamics
• Ceramic tube sockets
• Inputs for passive and active basses
• Tuner send jack
• Footswitchable mute/tune switch with flashing LED indicator
• Bright switch
• Three-band active EQ with four-position mid-shift switch
• Front-mounted, series effects loop
• Resonance and Presence damping controls
• Balanced, XLR direct output with ground lift and pre/post EQ switch

Order it with the insurance of our double guarantees!

The Peavey TVX 115 EX bass enclosure lays the foundation for sound in the serious bass player's rig. Capable of handling an input power of up to 500W, The TVX bass speaker cabinet can be used alone or in conjunction with the 210TVX M, 410TVX M, 810TVX M or similar enclosures.

Peavey TVX 115 EX 1X15 Bass Speaker Cabinet Specifications:

• 8 ohm
• Weight: 79
• Width: 24.875
• Depth: 20.062
• Height: 27.625

Peavey TVX 115 EX 1X15 Bass Speaker Cabinet Features:

• 250 watts (rms) continuous
• 500 watts program
• MDF construction
• 15 inch Sheffield® Pro 1500+ speaker
• Specially ported enclosure
• Frequency response: 30 Hz to 3.5 kHz
• One 1/4" phone jack input connection

A great cab for adding to a 2x10 combo. Order today.

The Peavey TVX 210 EX is a full-range bass guitar speaker enclosure in a small package. It may also be used as the top cabinet in a bi-amped bass system. This enclosure is covered with tough, black vinyl to give the you a rugged and easy-to-clean surface. The metal corners and grille add protection from the bumps and bruises encountered on the road. The 210TVX uses two 10-inch Sheffield® bass speakers, a horn tweeter and a custom crossover designed for great articulation, tone and clarity. A high frequency level control is part of the crossover so the high frequency output can be tailored to complement any style of playing. A protection circuit has been incorporated into the crossover to help prevent damage to the horn tweeter in the event of overpowering. If the average signal level going to the tweeter exceeds a certain threshold, the protection circuit is engaged.

Like the earlier TXF M series, this enclosure has low frequency vents on the front of the cabinet. This results in better low frequency impact. The 210TVX is a 4-ohm enclosure capable of handling an input power of up to 350 watts. It can be used alone or with any other bass guitar enclosure from Peavey. Be sure to check the amplifier specifications to verify the minimum impedance rating of the amp used to power this enclosure.

Peavey TVX 210 EX 2X10 Bass Speaker Cabinet Specifications:

• 30 Hz to 15 kHz
• Weight: 65
• Width: 24.625
• Depth: 19.125
• Height: 17.125

Peavey TVX 210 EX 2X10 Bass Speaker Cabinet Features:

• 175W RMS continuous at 4 ohms
• 350W program
• 2 - 10" Sheffield® bass speakers
• One phenolic dome tweeter with L-pad attenuator
• Compact, closed back
• Front-ported enclosure
• Improved crossover for better midrange tone
• Vents located on front of cabinet
• Horn tweeter with level control
• Protection circuit for horn tweeter

A great cab for adding to a 1x15 combo. Order today.

The Peavey TVX 410 EX is a full-range bass guitar speaker enclosure that uses 4 - 10-inch Sheffield® bass speakers, a horn tweeter and a custom crossover designed for great articulation, tone and clarity. The TVX 410 bass cab is covered with tough, black vinyl to give you a rugged and easy-to-clean surface. The metal corners and grille add protection from the bumps and bruises encountered on the road. A high frequency level control is part of the crossover so the high frequency output can be tailored to complement any style of playing. A protection circuit has been built into the crossover to help prevent damage to the horn tweeter in the event of overpowering. If the average signal level going to the tweeter exceeds a certain threshold, the protection circuit is engaged.

Like the earlier TXFM series, this enclosure has low frequency vents on the front of the cabinet. This results in better low frequency impact. The 410TVX is capable of handling an input power of up to 700 watts in 8-ohm and 4-ohm configurations. This enclosure can be used alone or with any other bass guitar enclosure from Peavey. Be sure to check the amplifier specifications to verify the minimum impedance rating of the amp used to power this enclosure.

Peavey TVX 410 EX 4X10 Bass Speaker Cabinet Specifications:

• 30 Hz to 15 kHz
• 8 ohm
• Weight: 102.5
• Width: 24.75
• Depth: 19.437
• Height: 28.25

Peavey TVX 410 EX 4X10 Bass Speaker Cabinet Features:

• Improved crossover for better midrange tone
• Vents located on front of cabinet
• Horn tweeter with level control
• Protection circuit for horn tweeter
• 350 watts (rms) continuous
• 700 watts (rms) program
• Four 10 inch Sheffield® bass speakers
• Front-ported enclosure
• Horn-loaded tweeter w/ L-pad attenuator for tweeter and protection circuitry

Save BIG when you buy today!

Essential whenever or wherever you're unable to crank full performance volume and tone. The concept is simple. A speaker is mounted in a completely closed, hinged cabinet with a microphone suspended inside. The cab has 1/4" in and outs, as well as a mic out to the mixing console. For recording, Isolation lets you record your amp full out, reflecting your true tone without waking the neighbors or inspiring visits from the cops. 10" Eminence Pro speaker. 18"W x 18"H x 31.5"D.

Randall Isolation 10 Speaker Cab Features:

• Isolates your sound for recording or quiet practice
• Lets you record at full volume so you get your true sound and dynamics
• Allows you to record live performances and get clean, isolated tracks
• Loaded with an Eminence 10" bass driver
• Gooseneck and mic clip are built in
• Great for quiet practice, too

A must tool for recording bass. Order today.

The high-quality Rockman Bass Ace Headphone Amp features built-in compression, volume control, and auxiliary stereo input/output. You can even route the output to a mixer for recording! The Rockman Bass Ace offers selectable treble/mid boost to add to your sound.

Rockman Bass Ace Headphone Amp Features:

• Built-in compression
• Volume control
• Auxiliary stereo input/output
• Selectable treble/mid boost

You'll love the sound and the convenience of quiet practice at full volume. Order today.

The Rampage Bass 10 Amplifier is perfect as a bass practice amp or backstage warm up. It looks cool with a kick-back design, and delivers amazing tone for an amp that only weighs 11 lb. It has 10W of power, a 6-1/2" speaker, a 1/4" headphone jack that automatically mutes the speaker so you can practice silently, and an 1/8" mini jack for plugging in a CD or MP3 player.

Rocktron Rampage Bass 10 1x6.5 Combo Amp Specifications:

• 
  
  Weight: 11lb.

Rocktron Rampage Bass 10 1x6.5 Combo Amp Features:

• 10W combo amp
• 6-1/2" speaker
• 1/4" headphone jack
• 1/8" mini jack CD/MP3 input
• Volume control
• Bass control
• Treble control
• 11 lb.

It not only sounds great, it's cute, too. Order it now.

Rocktron's Rampage 100 is a 100 watt bass guitar amp with plenty of punch. Designed with a 15" speaker and a tweeter in a new "kick-back" design, Rocktron's exclusive Dynamic Limiting eliminates worry about overloading and "woofing out" the speakers. Jam on and let the band know you're there!

The Rampage 100 offers a four band EQ section providing treble, middle frequency, middle level and bass. The frequency control knob adjusts the midrange EQ sweep. The Level control will adjust the overall output of the frequency - a very useful feature that allows the bassist to dial in all sorts of tones.

Use the line out from the internal preamp to connect to other outboard equipment such as an additional power amp or PA system. The headphone output automatically disconnects the speaker to practice in private, and can also be used for direct recording. The Rampage 100 amplifier includes an effects loop, and the effects loop return can be used as a stereo CD input (RTS) for practicing along with your favorite CDs!

Rocktron Rampage Bass 100 Combo Amp Features:

• 100W output
• 4 band EQ section
• Rocktron custom bass 15" speaker
• External speaker line out
• Master volume
• Effects loop
• Effects loop return can be used as a CD input for play-along
• Headphone output
• Dynamic Limiting prevents overloading the speaker.
• Kick-back cabinet design for great projection

Order today with the protection of our 45-day lowest price and total satisfaction guarantees!

The Rocktron bass amp delivers great tone and a great price. It's the perfect practice amp that rocks just like its bigger brothers.

The Rocktron Rampage BASS amp offers 15 watts through a custom 8" speaker and weighs a mere 16 pounds. It looks fantastic, sporting a cool "kick-back" design.

The BASS 15 offers precision control over your sound; the Bass control adjusts the low-end frequencies, Mid controls the mids, and Treble dials in the high-end.

Plugging into the Rampage Bass 15's headphone jack automatically mutes the speaker, a handy feature for direct recording and in situations where you want to mute the speaker while recording.

Additionally, use the 1/8" mini jack to plug in an external CD/MP3 player so you can jam along with songs.

Most of all, you'll love the sound the Rocktron Rampage bass amplifier provides.

Rocktron Rampage BASS 15 1x8 Bass Combo Amp Specifications:

• 15W combo amp
• 8" speaker
  
  Bass control
• Mid control
• Treble control
  
  Headphone jack with automatic muting
• 1/8" mini jack
  
  Weight: 16lb.
  
  

Save BIG when you buy today!

With a 3 band EQ section, and Rocktron's custom bass 8" speaker, you'll be pleasantly surprised at the tone available in this Rocktron Rampage Bass 20 Combo Amp. The Rampage 20 includes an effects loop, and it's effects loop return can be used as a stereo CD Input (RTS) for practicing along with your favorite CDs! And, use the headphone output lets you practice quietly. Rocktron also included their exclusive Dynamic Limiting so you won't have to worry about overloading and "woofing out" your speakers. The Rampage 20 amp is housed in a heavy- duty cabinet with durable covering, corners, and handle.

Rocktron Rampage Bass 20 Combo Amp Features:

• 20W output
• 3 band EQ section
• Rocktron custom bass 10" speaker
• Effects loop
• Effects loop return can be used as a CD input for play-along
• Headphone output
• Dynamic Limiting prevents overloading the speaker.
• Kick-back cabinet design for great projection

Save BIG when you buy today!

The Rampage Bass 200 is a 200W bass amplifier with a 15" Rocktron Velocity Custom Voiced VSB15 speaker. You'll love the sound and the features of this awesome bass amp.

Rampage Bass 200 provides high- and low-impedance inputs with clip indicators, 5 bands of EQ with In/Out switching, Deep and Bright buttons for boosting lows and highs in the preamp. A Shape control adjusts the overall tonal contour of the EQ, while Gain and Master volumes let you dial in overdrive distortion at lower levels.

The Rampage Bass 200 is also equipped with a switchable compressor that provides increased sustain and a more consistent output level, regardless of how light or hard you hit the stringsr.

The effects loop send/return are on the front panel, along with a line out with level for direct recording or plugging into a PA. The Bass 200 also has an 8-ohm speaker jack that allows you to use the internal speaker or an external cab, a speed-controlled fan for heat management, a switch-on delay for silent power-up, and switched speaker output lines for silent power-down. For a cool cosmetic touch, a blue lighted Rocktron badge complements the amp's brushed faceplate.

Rocktron Rampage Bass 200 1x15 Combo Amp Specifications:

• 200W bass amp
• 15" speaker
  
  5-band EQ controls:
• Bass
• Mid-Low
• Mid
• Mid-High
• Treble
  
  Weight: 65lb.
  
  

Rocktron Rampage Bass 200 1x15 Combo Amp Features:

• 200W of power
• 15" speaker
• 5-band EQ circuit with In/Out switch
• High- and low-impedance inputs
• Deep and Bright boost buttons
• Shape control
• Gain and Volume controls
• Built-in compressor with In/Out switch
• Front-panel effects loop
• send/return
• Line out jack
• 8-ohm speaker jack
• 65 lb.

Order today and rampage onstage in style.

With a 3 band EQ section, and Rocktron's custom bass guitar 10" speaker, you'll be pleasantly surprised at the tone available in this Rocktron Rampage 30 Bass Amp. The Rampage 30 includes an effects loop, and the effects loop return can be used as a stereo CD input (RTS) for practicing along with your favorite CDs! Use the headphone output when you don't want to disturb anyone. Rocktron also included their exclusive Dynamic Limiting so you won't have to worry about overloading and "woofing out" the speakers. The Rampage 30 amp is built with heavy duty speaker cabinets in a great kick-back cabinet design.

Rocktron Rampage Bass 30 Combo Amp Features:

• 30W output
• 3 band EQ section
• Rocktron custom bass 10" speaker
• Effects loop
• Effects loop return can be used as a CD input for play-along
• Headphone output
• Dynamic Limiting prevents overloading the speaker.
• Kick-back cabinet design for great projection

We guarantee you'll love it and pay the lowest price or your money back!

The Rampage Bass 60 is a bass guitar amp with 60 watts of power in a kick-back design that gets your sound out to the crowd. It features an exclusive 12" speaker designed specifically for this amplifier. As a bonus, Rocktron's exclusive Dynamic Limiting eliminates worry about overloading and "woofing out" the speakers. Jam on and let the band know you're there!

The Rocktron Rampage 60 offers a four band EQ section providing treble, middle frequency, middle level and bass. The frequency control knob adjusts the midrange EQ sweep. The Level control will adjust the overall output of the frequency - a very useful feature that allows the bassist to dial in all sorts of tones.

Rocktron Rampage Bass 60 Combo Amp Features:

• 60W output
• 4 band EQ section
• Rocktron custom bass 12" speaker
• Master volume
• Effects loop
• Effects loop return can be used as a CD input for play-along
• Headphone output
• Dynamic Limiting prevents overloading the speaker.
• Kick-back cabinet design for great projection

Order today with the protection of our 45-day lowest price and total satisfaction guarantees!

100 very loud watts through a heavy-magnet coaxial 2-way 12" speaker, 4-band EQ, compressor, balanced and line outs, plus extension speaker out let it hold its head up on any stage. Small size; light weight; 8 COSM amp models; 5 digital effects including chorus, flanger, T-wah, and independent delay and reverb; shape switch; plus pad switch for active and passive basses make it perfect for studio work and basement jamming, too.

Roland Cube 100 Bass Amp Features:

• 100W
• 12" coaxial 2-way speaker
• 8 COSM amp models
• 5 digital effects
• 4-band EQ
• Compressor
• Shape switch
• Balanced out (with pre/post switch)
• Line out
• Recording/phones out
• Pad switch
• External speaker out

One small outlay can result in a whole new era for your sound. Do it now!

When it comes to compact bass amplifiers, the Roland Cube-30 Bass Combo Amp is in a class all its own. Powerful and lightweight, the Roland Cube-30 combines a 30W amplifier with a 10" speaker and DSP modeling to crank out a range of popular bass amp sounds. Roland also gives you onboard compression, Shape switch, 3-band EQ, and digital effects with the Cube-30 Bass Combo.

Roland Cube-30 Bass Combo 1X10 Amp Specifications:

• Rated Power Output 30W Nominal Input Level (1 kHz) INPUT: -20 dBu,
• AUX IN: -10 dBu
• Speaker 10" (25cm) + Tweeter (Coaxial type)
• Controls
• COMPRESSION knob, SHAPE button, COSM AMP TYPE knob (OCTAVE BASS, FLIP TOP, B MAN, T.E, BASS 360, SESSION, CONCERT810), GAIN knob, VOLUME knob, BASS knob (EQUALIZER), MIDDLE knob (EQUALIZER), TREBLE knob (EQUALIZER), EFX
• (CHORUS, FLANGER, T-WAH) knob, DELAY/REVERB, POWER switch n Indicators
• COMPRESSION, EFX, POWER n Connectors INPUT jack (1/4" phone type), AUX IN jack
• (stereo 1/4" phone type), RECORDING OUT/HEADPHONE jack (stereo 1/4" phone type),
• FOOT SW jack (EFX on/off, DELAY/REVERB on/off) (stereo 1/4" phone type) n Power
• Supply AC117V, 230V or 240V
• Power Consumption 34W
• Dimensions 15-1/4"W x 15"H x 9-1/4"D
• Weight 20 lbs., 5 oz.
• Accessories Owner's Manual
• Options Footswitch FS-5U (BOSS)
• Connection cable PCS-31

Roland Cube-30 Bass Combo 1X10 Amp Features:

• 30W of power
• 10" coaxial-design speaker
• 6 bass amp models
• Shape switch
• 5 high-quality DSP effects: reverb, delay, chorus, flanger and T-Wah
• 3-band EQ
• Compression
• Auxiliary and footswitch inputs
• Recording/headphones output

Order now and introduce your bass to its new best friend.

Roland's most advanced bass amplifier employs proprietary Feed Forward Processing (FFP) with Active Speaker Control technology for a marked increase in speaker efficiency and response, loudness, and tone.

COSM Vintage, Modern, and Super Flat preamps deliver a range of great tones beyond that of a traditional bass amp with simple, analog-style controls. The Super Flat setting reproduces the sonic characteristics of your bass without coloration and its fat and clear sound is perfect for bridge and soundboard pickups on upright basses. Solid state or fat, natural, Tube Logic compression smoothes out your attack for rich, pro-level tone.

The front panel has normal and piezo-level inputs, active/passive switch, gain, preamp type knob with Shape switch, 4-band semi-parametric EQ, a tweeter control knob, effect blend, master volume, mute switch, and headphone jack. On the rear is a footswitch jack, effects loop I/O, subwoofer out, line out, tuner out, and the XLR D.I.

An optional powered extension speaker adds another layer of punch for performers who play larger venues. (See accessory box on this page.)

Roland D-Bass 115 Amplifier Features:

• 300W bi-amped power
• 1 x 15" (200W) with tweeter (100W)
• 3 COSM preamps: Vintage, Modern, and Super Flat
• DSP-powered Feed Forward Processing
• Active Speaker Control
• Pro-quality compression
• Active/passive input-level switch
• Gain
• Preamp type select knob with Shape switch
• 4-band semi-parametric EQ
• Tweeter control knob
• Effect blend
• Master volume
• Mute switch
• I/O includes: normal and piezo inputs, headphone jack, tuner out, footswitch jack, effects loop I/O, subwoofer out, line out, XLR DI out with ground lift
• Casters
• Optional powered extension speaker (model 115X)
• 23-1/2"W x 26-9/16"H x 16-1/8"D
• 55 lbs.

The cleanest lows and the sweetest highs; vintage-style thump and rumble; super-accurate uncolored sound for your electric, upright, or acoustic; it's all here. Order your D-Bass amp today.

Roland's most advanced bass amplifier employs proprietary Feed Forward Processing (FFP) with Active Speaker Control technology for a marked increase in speaker efficiency and response, loudness, and tone.

COSM Vintage, Modern, and Super Flat preamps deliver a range of great tones beyond that of a traditional bass amp with simple, analog-style controls. The Super Flat setting reproduces the sonic characteristics of your bass without coloration and its fat and clear sound is perfect for bridge and soundboard pickups on upright basses. Solid state or fat, natural, Tube Logic compression smoothes out your attack for rich, pro-level tone.

The front panel has normal and piezo-level inputs, active/passive switch, gain, preamp type knob with Shape switch, 4-band semi-parametric EQ, a tweeter control knob, effect blend, master volume, mute switch, and headphone jack. On the rear is a footswitch jack, effects loop I/O, subwoofer out, line out, tuner out, and the XLR D.I.

An optional powered extension speaker adds another layer of punch for performers who play larger venues. (See accessory box on this page.)

Roland D-Bass 115 Amplifier - Scratch 'n' Dent Features:

• 300W bi-amped power
• 1 x 15" (200W) with tweeter (100W)
• 3 COSM preamps: Vintage, Modern, and Super Flat
• DSP-powered Feed Forward Processing
• Active Speaker Control
• Pro-quality compression
• Active/passive input-level switch
• Gain
• Preamp type select knob with Shape switch
• 4-band semi-parametric EQ
• Tweeter control knob
• Effect blend
• Master volume
• Mute switch
• I/O includes: normal and piezo inputs, headphone jack, tuner out, footswitch jack, effects loop I/O, subwoofer out, line out, XLR DI out with ground lift
• Casters
• Optional powered extension speaker (model 115X)
• 23-1/2"W x 26-9/16"H x 16-1/8"D
• 55 lbs.

The cleanest lows and the sweetest highs; vintage-style thump and rumble; super-accurate uncolored sound for your electric, upright, or acoustic; it's all here. Order your D-Bass amp today.