The Eminence Basslite S2012 12" Bass Speaker delivers full, round bass tone. Ideal in vented 1x12", 2x12", and 4x12" enclosures.

Eminence Basslite S2012 12" Bass Speaker Specifications:

• Nominal Basket Diameter: 12", 304.8mm
• Nominal Impedance*: 8 ohms
• Power Rating**: 150W
• Resonance: 48Hz
• Usable Frequency Range: 49Hz-4.5kHz
• Sensitivity***: 97
• Magnet Weight: 4 oz.
• Gap Height: 0.28", 7.2mm
• Voice Coil Diameter: 2", 50.8mm
  
  Thiele & Small Parameters
• Resonant Frequency (fs): 48Hz
• DC Resistance (Re): 5.1
• Coil Inductance (Le): 0.43mH
• Mechanical Q (Qms): 5.5
• Electromagnetic Q (Qes): 0.53
• Total Q (Qts): 0.48
• Compliance Equivalent Volume (Vas): 91 liters / 3.2 cu. ft.
• Peak Diaphragm Displacement Volume (Vd): 270cc
• Mechanical Compliance of Suspension (Cms): 0.24mm/N
• BL Product (BL): 11.7 T-M
• Diaphragm Mass inc. Airload (Mms): 46 grams
• Efficiency Bandwidth Product (EBP): 91
• Maximum Linear Excursion (Xmax): 5.2mm
• Surface Area of Cone (Sd): 519.5 cm2
• Maximum Mechanical Limit (Xlim): 9.8mm
  
  Mounting Information:
• Recommended Enclosure Volume:
• Sealed: 31-35 liters/ 1.1-1.3 cu.ft.
• Vented: 42.5-85 liters/ 1.5-3 cu.ft.
• Overall Diameter: 12.03", 305.5mm
• Baffle Hole Diameter: 10.95", 278.1mm
• Front Sealing Gasket: fitted as standard
• Rear Sealing Gasket:
• Mounting Holes Diameter: 0.25", 6.4mm
• Mounting Holes B.C.D.: 11.59", 294.3mm
• Depth: 5.1", 130mm
• Net Weight: 4.1 lbs., 1.9 kg
• Shipping Weight: 5.8 lbs., 2.6 kg
  
  Materials of Construction
• Copper voice coil
• Polyimide former
• Neodymium magnet
• Non-vented core
• Pressed steel basket
• Paper Cone
• Cloth cone edge
• Solid composition felt dust cap
  
  *Please inquire about alternative impedances.
• **Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
• ***The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms.
• Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software
• calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with
• fiberglass on all six surfaces (three with custom-made wedges)

Eminence Basslite S2012 12" Bass Speaker Features:

• Delivers full, round bass tone
• Ideal for vented enclosures

Put it in the cart.