Top of the SWR line!

The SWR SM-900 Bass Amp has the power, the sound, and the versatility bass players dream of. It can be run mono, stereo, or biamped and delivers 350W RMS stereo and 800W mono into 4 ohms. It has 2 independent and footswitchable 3-band, semi-parametric EQs, sidechain stereo and mono effects loops, an effects blend control, tuner send, adjustable limiter, a built-in crossover, and an XLR record out with pad and ground lift. Fan cooled, rackmountable.

SWR SM-900 Bass Amp Specifications:

• DIMENSIONS: 19" W x 3-9/20" H x 13-3/4" D
• WEIGHT: 26 lbs.
• POWER OUTPUT:
• Bridge/Mono Mode 900 Watts @ 4 Ohms, 650 Watts @ 8 Ohms, 440 Watts @ 16 Ohms (minimum load = 4 Ohms)
• Stereo Mode (per side): 400 watts @ 4 Ohms, 240 watts @ 8 Ohms, 144 watts @ 16 Ohms (minimum load = 2 Ohms)
  
  DISTORTION:
• Power Amplifiers (Effects Return Jack "in"): 0.03% THD
• I.M. Distortion: 0.06%
• System Distortion (Gain and Master Volume full, Enhancer at minimum
• and Tone controls set flat): 0.4% THD
• SIGNAL TO NOISE RATIO: -75dB (<8 millivolts typical)
• EQUIVALENT INPUT NOISE: 8.9 microvolts
• INPUT IMPEDANCE:
• Passive/Active Input: 800kOhms
• Active Input: 60kOhms
• Effects Return: 27K Ohms
  
  OUTPUT IMPEDANCE
• Effects Send: 100 Ohms
• Tuner Send: 100 Ohms
• XLR:1.5kOhms
• Crossover High and Low Outs: 100 Ohms
• SUGGESTED SPEAKER ENCLOSURES
• Megoliath
• Goliath Senior
• Big Bertha
• Goliath III
• SUGGESTED SPEAKER COMBINATIONS
• (2) Goliath IIIs
• (2) Son Of Berthas
• (1) Goliath III & (1) Son Of Bertha
• (1) Goliath III & (1) Big Ben

SWR SM-900 Bass Amp Features:

• FRONT PANEL:
• All tube preamp gain stages
• Dual independent input jacks compatible for both active and passive instruments
• Gain control with LED peak clipping indicator
• Limiter with variable threshold control
• Exclusive Aural Enhancer circuitry
• Master volume control w/clip LED indicator
• Active bass and treble controls
• 2 independent switchable
• 3-band semi-parametric EQs
• EQ footswitch
• Effects blend control
• Tuner send
• Electronic crossover
• Rackmountable
• Bi Amp Crossover Point Control: 100Hz to 1000Hz
• Crossover Slope: 12 dB per octave
• Rack Handles
• REAR PANEL:
• Stereo and Mono Effects Loop
• Balanced XLR Output with select switch for Line or Direct Mode
• Ground lift & pad control
• High and Low Crossover Outputs
• Power Amp Assign Switch selects Bridge or Stereo Mode
• SPEAKER OUTPUTS:
• 2 - 1/4" jacks each for Left and Right Stereo Out
• One Speakon jack for Left and Right Side Output
• One Speakon Output Jack for Mono Operation
• Speaker fuses (x2): 3AG, 10 Amp, Fast Blo
• Line Fuse: 3AG, 8 Amp, Slow Blo
• On/Off Switch
• INTERNAL:
• (1) 12AX7 Preamp Tube
• Cooling fan
• FREQUENCY RESPONSE: (Power amplifier): -3dB @ 20Hz and 40KHz
• SENSITIVITY:
• Full output, 8 ohm load, 100Hz
• Passive Input Jack: 50 millivolts
• Active Input Jack: 200 millivolts
• Power Amplifiers (Effects Return Jack "in"):1.6 volts
• DiISTORTION:
• Power Amplifiers (Effects Return Jack "in"): 0.03% THD
• I.M. Distortion: 0.06%
• System Distortion
• (Gain and Master Volume full, Enhancer at minimum
• and Tone controls set flat): 0.4% THD
• SIGNAL TO NOISE RATIO: -75dB (<8 millivolts typical)
• EQUIVALENT INPUT NOISE: 8.9 microvolts
• INPUT IMPEDANCE:
• Passive/Active Input: 800kOhms
• Active Input: 60kOhms
• Effects Return: 27kOhms
• OUTPUT IMPEDANCE:
• Effects Send: 100 Ohms
• Tuner Send: 100 Ohms
• XLR:1.5kOhms
• Crossover High and Low Outs: 100 Ohms
• SUGGESTED SPEAKER ENCLOSURES:
• Megoliath
• Goliath Senior
• Big Bertha
• Goliath III
• SUGGESTED SPEAKER COMBINATIONS:
• (2) Goliath IIIs
• (2) Son Of Berthas
• (1) Goliath III & (1) Son Of Bertha
• (1) Goliath III & (1) Big Ben

You're serious about your music. Get a head that matches your commitment. Order today.

Beautifully equipped and fantastic sounding.

2008 marks the 20th anniversary of a love affair between bassists and one of the most influential bass combo amplifiers in history the SWR Redhead. The original Redhead was a revolution in bass guitar amplification, combining SWR's crystal-clear, full-range tube preamp with a robust solid-state power platform into a rock solid, yet easily portable 2X10 cabinet. Loaded with two state-of-the-art 10" speakers and a high frequency horn, the Redhead bass amp sounded simply phenomenal and offered unprecedented patching options designed to meet the needs of discerning bassists, whether playing live or in the studio.

In celebration of the 20th anniversary, SWR raises its own bar with the newly redesigned Redhead bass amplifier. Two custom-designed Eminence drivers and a Foster horn provide the excellent sound, while several design and feature innovations make this more than just a product face lift. It's a whole new Redhead with lots of control and I/O options to entice any bassist. Fall in love again, with SWR's Redhead Bass Combo Amp.

SWR Redhead Bass Combo Amp Specifications:

• Weight: 95 lbs. (with cover)
• Dimensions: 22.5"W x 21.25" x 16"D (16.75" with the front cover attached)
• Power Handling: 400W (internal @ 4 ohms), 650 watts (@ 2 ohms with 4 ohm extension speaker)
• Tube Complement: Two 12AX7 (Preamp & Tube DI)
• Input Impedance:
• Passive: 1MOhm
• Active: 130kOhm
• Effects Return: 10kOhm
• Output impedance:
• Effects Send: 220 ohms
• Tuner send: 220 ohms
• Tube DI line out: 600 ohms
• Signal-to-noise ratio: -74 dB (<10 milivolts typical)
• Crossover: Third order, 6db rolloff, 18db butterworth high pass 4KHz turnover

SWR Redhead Bass Combo Amp Features:

• 2 - 10" custom-designed 8-ohm Eminence drivers
• One Foster horn
• 1-channel
• Classic SWR preamp with Aural Enhancer
• 2 -12AX7 Preamp Tubes - (Preamp & Tube DI)
• Front ported (slot) eliminates unwanted noise
• All-tube studio-quality Direct Out with front-panel controls including ground lift, level pad, and mute
• 3-band active EQ with variable midrange, pull turbo (ultra-low) and transparency (ultra-high) controls
• SWR compressor circuit
• Tuning Mute
• Side-chain effects loop with Blend control
• Single empty rack space for tuner or effects unit
  
  Front Panel:
• Tuning Mute
• Internal Speaker Defeat switch
• Tube Direct Out Mute
• Steel reinforced front cover/tilt-back stand
• Cabinet-mounted attenuator for Foster horn
• Tuning mute (sliding switch)
• 1/4" inputs (Active & Passive)
• Gain control (with Pre Amp clip LED)
• Aural Enhancer control
• Bass control (with "Pull Turbo")
• Mid-Range Level control
• Mid-range Frequency control
• Treble control (with "Pull Transparency")
• Compressor control (with Compression LED)
• Master Volume control (with Power Amp clip LED)
• Tube DI Line/Direct (sliding switch)
• Tube DI Mute/Line (sliding switch)
• Tube DI Ground Lift (sliding switch)
• Tube DI Pad control
• 1/4" Headphone jack
• Effects Blend control
• Internal Speaker On/Off (rocker switch)
• Power On/Off (rocker switch)
  
  Back Panel:
• AC power outlet (120V version only)
• AC power input
• 1/4" internal speaker jack
• Speakon & 1/4" external speaker jacks
• 1/4" Tuner Out jack
• Effects Loop (1/4" Send/Return)
• Tube DI Outputs (XLR & 1/4")
  
  5/8" 7-ply, maple or birch plywood construction with waterproof glue
• All joints Dado and Rabbet, glued and nailed
• Extremely heavy bracing
• Black carpeting with stack lock corners and chrome stamped steel vibration-free grille
• Protective steel-reinforced front cover (doubles as tilt-back stand)
• Removable casters
• Cooling fan
• 5-year transferable limited electronic warranty

A classic redux. Get your Redhead today and see why it's survived in an ever-changing world. Order today!

The cutting edge in bass cab design!

It's designed for the player who wants flexibility combined with performance at high volume levels. A stereo/mono design allows the user to split a signal into 2 different sections of the cab for true stereo separation. In mono, all 8 speakers work together for a truly massive sound. 8 custom designed 10" drivers, 2 independent speaker compartments, high frequency horn with attenuator. 1,200W handling. 8 ohm stereo/4 ohm mono operation.

Save BIG when you buy today!

Mondo wattage with the SubWave and overdrive circuits of the Mo'Bass.

The 750X Bass Amplifier Head's Subwave technology produces a pure and accurate octave signal while the overdrive pushes the internal preamp's 12AX7 tube circuitry to create subtle, sweet crunch or nasty growl. The SWR 750x's included custom footswitch controls both effects. 750W RMS into 4 ohms, 850W into 2.6 ohms, 425W at 8 ohms. Pre-master preamp out, variable-mid EQ, sidechain effects loop, effects blend control, adjustable limiter, XLR balanced out, tuner send, pull turbo, pull transparency, and speaker on/off switch provide unlimited flexibility onstage or in the studio. For professional use, the 750x is designed for easy installation in ATA-approved rack cases. 19"W x 5-1/2"H x 15"D, 31 lbs.

SWR 750x Bass Amplifier Head Features:

• SubWave suboctave
• Overdrive
• Internal preamp with 12AX7 tube circuitry
• 750W RMS into 4 ohms, 850W into 2.6 ohms, 425W at 8 ohms
• Included custom footswitch
• Pre-master preamp out
• Variable-mid EQ
• Sidechain effects loop
• Effects blend control
• Adjustable limiter
• XLR balanced out
• Tuner send
• Pull turbo
• Pull transparency
• Speaker on/off switch

Time to get serious? Then get serious. Put it in the cart.

Successor to the Basic Black with SubWave suboctave and Aural Enhancer.

350W into 4 ohms or 450W with an extension speaker cab is plenty of punchy power to rule the room. Custom SWR 15" driver plus HF horn provide full range sound, making the most of the onboard effects. Variable XLR pad for the balanced out, side-chain effects loop, tuner out, 1/4" Speakon extension jacks, speaker on/off switch, and 3-way tweeter control switch make this an amazingly versatile and high-powered combo that cuts it alone and really dominates with an extension speaker. Aural Enhancer adds harmonic richness and thickens the tone.

SWR Black Beauty 350w 1x15" Bass Combo Specifications:

• 23"W x 26"H x 18-1/2"D
• 95 lbs.

SWR Black Beauty 350w 1x15" Bass Combo Features:

• 350W into 4 ohms or 450W with an extension speaker cab
• Custom SWR 15" driver plus HF horn
• Variable XLR pad for the balanced out
• Side-chain effects loop
• Tuner out
• 1/4" Speakon extension jacks
• Speaker on/off switch
• 3-way tweeter control switch
• Aural Enhancer adds harmonic richness
• SubWave suboctave for unbelievable depth

Real art requires a few sacrifices. Make the investment in the amp you need now. Then never look back.

The Goliath Senior can't be beat for a serious, single-cabinet professional-quality rig! Built to last - with a recessed top handle, tilt-back design and heavy-duty casters, the Goliath Senior IV bass cab delivers plenty of crystal-clear, punchy tone and is ready to hit the road!

While the cabinets in the Goliath IV Series may look familiar; with the same handsome, rugged, roadworthy exteriors as their predecessors, the real action is inside. Extensive research has led the SWR R&D team to develop upgrades to their speakers that allow a significant improvement in both power handling capabilities and their sonic quality.

SWR Goliath Senior IV 6X10 Bass Speaker Cabinet Features:

• 6X10 enclosure
• 1200 watts handling
• Custom SWR speakers
• Horn tweeter w/ attenuator
• Dual SpeakonŠ and _" speaker jacks
• Heavy duty casters
• Side spring-loaded handles
• Vibration-free shock-mounted chrome grill
• Front slot port
• Impedance: 4 ohms

Get the one that will do the job right for years. Call or click today to order.

Mondo wattage with the SubWave and overdrive circuits of the Mo'Bass.

The 750X Bass Amplifier Head's Subwave technology produces a pure and accurate octave signal while the overdrive pushes the internal preamp's 12AX7 tube circuitry to create subtle, sweet crunch or nasty growl. The SWR 750x's included custom footswitch controls both effects. 750W RMS into 4 ohms, 850W into 2.6 ohms, 425W at 8 ohms. Pre-master preamp out, variable-mid EQ, sidechain effects loop, effects blend control, adjustable limiter, XLR balanced out, tuner send, pull turbo, pull transparency, and speaker on/off switch provide unlimited flexibility onstage or in the studio. For professional use, the 750x is designed for easy installation in ATA-approved rack cases. 19"W x 5-1/2"H x 15"D, 31 lbs.

SWR 750x Bass Amplifier Head - Scratch 'n' Dent Features:

• SubWave suboctave
• Overdrive
• Internal preamp with 12AX7 tube circuitry
• 750W RMS into 4 ohms, 850W into 2.6 ohms, 425W at 8 ohms
• Included custom footswitch
• Pre-master preamp out
• Variable-mid EQ
• Sidechain effects loop
• Effects blend control
• Adjustable limiter
• XLR balanced out
• Tuner send
• Pull turbo
• Pull transparency
• Speaker on/off switch

Time to get serious? Then get serious. Put it in the cart.

Featuring more lows from the Subwave octave generator.

World-famous SWR power in a convenient 2-space rack unit. 550W at 4 ohms, all-tube preamp, dual independent input jacks both compatible with active and passive basses, exclusive Aural Enhancer circuitry, Subwave with level control, limiter with defeat switch, active bass and treble controls, variable midrange EQ, effects blend control, and ultrahigh-polished aluminum front panel with chrome rack handles. Back panel features include sidechain mono effects loop, balanced XLR line out, tuner send, subwave footswitch jack, dual Speakon and 1/4" speaker outputs.

SWR 550X Bass Amp Head Features:

• 2-space rack unit
• 550W at 4 ohms
• All-tube preamp
• Dual independent input jacks both compatible with active and passive basses
• Exclusive Aural Enhancer circuitry
• Subwave with level control
• Limiter with defeat switch
• Active bass and treble controls
• Variable midrange EQ
• Effects blend control
• Utra-high-polished aluminum front panel with chrome rack handles
• Back panel features include sidechain mono effects loop
• Balanced XLR line out
• Tuner send
• Subwave footswitch jack
• Dual Speakon and 1/4" speaker outputs

Put a good head on your speaker's shoulders. Order today.

Save BIG when you buy today!

The king of punch!

SWR builds bass gear for pros. The Henry Speaker System is no exception. Loaded with 8 - 8" Celestion Custom speakers, it delivers punchy tone for all of today's sounds. The carpeted cab with tweeter has a tilt-back design for easy transport. 2-year warranty.

SWR Henry The 8x8 Bass Speaker System Specifications:

• 480W RMS power handling @ 4 ohms
• Frequency Response -6dB @ 35Hz and 18KHz
• Dimensions: 23-1/4"W x 36-1/2"H x 18-1/2"D
• Weight: 100 lbs.

SWR Henry The 8x8 Bass Speaker System Features:

• 3 front tube ports
• Spring-loaded rubber grip handle
• Black Ozite carpeting with Stack Lock corners
• Chrome stamped steel vibration-free grille
• High quality metal input panel with heavy-duty attenuator
• 1/4" In/Out and Speakon jacks
• Tilt-back design
• Recessed top handle
• Heavy-duty wheels for easy transportation
• 8 Custom 8" Celestion drivers
• Le Son TLX-1 piezo tweeter

SWR Henry The 8x8 Bass Speaker System Includes:

• 2-year warranty

Order today and you'll be ready to play anywhere!

Massive power for pro bassists!

750 watts of pure SWR power in a rackmountable head. Dig the chrome front panel. This is the amplification equivalent of a Harley Davidson - revved up and ready to roar.

SWR Power 750 Power Amp Specifications:

• (@ 850 watts RMS) -3dB @ 20Hz and 40kHz
• Dimensions: 19"W x 5-1/3""H x 10.5"D (3 rackspaces)
• Weight: 33 lbs.
• Power Output: 850W @ 2.6 ohms, 750W @ 4 ohms, 450W @ 8 ohms (minimum load = 2.6 ohms)
• DISTORTION:
• < .026% THD, 1kHz @ 8 ohms
• < .13% THD, 20Hz to 20kHz @ 8 ohms
• Intermodulation Distortion = .07%
• INPUT IMPEDANCE:
• Balanced = 10kOhms
• Unbalanced = 33kOhms
• OUTPUT IMPEDANCE: Slave Output = 100 ohms
• NOISE:
• Residual = <.00072V (720mV)
• Signal to noise ratio = <-100dB
• WARRANTY: 2 years parts and labor

SWR Power 750 Power Amp Features:

• FRONT PANEL FEATURES:
• Gain Control
• 4 segment LED dot bar display (-20, -10, 0, +3)
• Power On/Off Switch
• Speaker On/Off Switch
• LED "On" indicator
• Rack Handles
• Aluminum chassis with steel reinforced corners
• Chromed steel front panel
• REAR PANEL FEATURES:
• 1/4" Input Jacks
• Slave Outputs
• 2 1/4" Speaker Output Jacks
• 2 Speakon Output Jacks
• Speaker fuse: 3AG,˙15 Amp, Fast Blo
• Line Fuse: 3AG,˙12 Amp, Slow Blo
• A/C cord receptacle
• INTERNAL FEATURES:
• The Power 750 features a quasi-complimentary design utilizing Sanken flat-packed power transistors and a standard iron laminated core transformer.
• CHASSIS MATERIAL:
• Steel (with polished aluminum faceplate).

When you've gotta have the biggest and baddest, this is the one to spring for. Order today!

Loaded with the features upright and acoustic bass players crave!

SWR amplifiers have been an integral part of the tool kit for thousands of upright bassists since the brand debuted in 1984. The Natural Blonde amp has taken the features that appeal most to upright players, mixed in some features for acoustic bass guitarists and blended them into the ideal amp for these discriminating musicians. Two independent channels and a jam-packed feature set make the Natural Blonde a Swiss Army knife for bassists of all styles.

SWR Natural Blonde 200W Acoustic Bass Combo Features:

• 200 watts
• 2 X 8 enclosure with hi-fi tweeter and rear-firing 5" driver
• Classic SWR preamp with Aural Enhancer™
• Bass Intensifier™ circuitry
• Master tuning mute and individual channel mutes
• Two independent input channels with 3-band active EQ & phase reverse
• 1/4" Low Z Balanced input (ch. 1)
• Low Z Balanced XLR & unbalanced 1/4" input (ch. 2)
• EQ bypass function on both channels
• Independent XLR outputs for individual and summed channels
• Independent side-chain effects loop for each channel
• Footswitchable (Master mute and Bass Intensifier)
• Convenient luggage-style telescoping handle with wheels (optional)
• Spring-handle on bottom of cabinet for carrying or operation in tilt-back mode

Be proud of your roots! Order the Natural Blonde today.

The 4X10 that started it all! They thought SWR was crazy to use four 10" speakers and a horn in a bass cabinet! Twenty-one years and countless performances later, the Goliath 4X10 remains the most copied bass speaker cabinet in the world.

SWR Goliath IV 4X10 Bass Speaker Cabinet Features:

• 4X10 enclosure
• 800 watts handling
• Custom SWR speakers
• Horn tweeter w/ attenuator
• Dual SpeakonŠ and _" speaker jacks
• Removable casters
• Side spring-loaded handles
• Vibration-free shock-mounted chrome grill
• Front slot port
• Impedance: 4 or 8 ohms

Get the one that will do the job right for years. Call or click to order your Goliath IV bass cab today.

Thunderous and portable!

The WorkingPro 2X10C offers 260W of power at 8 ohms (400 watts with an 8-ohm extension cabinet), housed in a tough, cool-looking cabinet with 2 - 10" speakers, a horn tweeter, and tilt-back legs. An ideal amp for nearly any performance, practice or recording situation.

Lots of tone shaping tools including SWR's exclusive Bass Intensifier circuit makes it a working bassist's dream machine. It sounds huge but is pleasingly portable.

SWR WorkingPro 2X10C Bass Combo Amp Specifications:

• Controls: Variable Tweeter Attenuator
• Frequency Response: 98 dB SPL @ 1W1M (-3dB @ 63Hz and 18.5KHz)
• SPL: 98 dB SPL @ 1W1M (-3dB @ 63Hz and 18.5KHz)
• Weight: 55 lbs.
• Dimensions: 23"W x 17"H x 16-1/4"W
  
  

SWR WorkingPro 2X10C Bass Combo Amp Features:

• 260W of power
• 2 - 10" Eminence speakers and Le Son TLX-1e horn tweeter
• Tilt-back legs
• Black carpet covering
• Stamped grille
• SWR preamp
• with Aural Enhancer
• Bass Intensifier circuit
• Wedge EQ circuit
• Side-mounted monitor input jack
• 3-Band Active EQ
• Headphone jack
• Effects Send & Return
• Unbalanced 1/4" & Balanced XLR Lines out

You can't beat it for huge bass tone. Order today.

Latest version of the 350 with SubWave and variable XLR pad for the balanced out.

All the tight punch and moaning sustain of the original 350, including sidechain effects loop, effects blend control, limiter with defeat, cooling fan with defeat, and tuner send. Now with added Mo'Bass-type SubWave suboctave and variable XLR. 350W RMS into 4 ohms, 450W into 2 ohms. EQ with variable mid for precision tone control. For professional use, the 350x is designed for easy installation in ATA-approved rack cases. 19"W x 3-1/2"H x 12-1/4"D. 17 lbs.

SWR 350x Bass Head Features:

• 350W RMS into 4 ohms, 450W into 2 ohms
• Sidechain effects loop
• Effects blend control
• Limiter with defeat
• Cooling fan with defeat
• Tuner send
• SubWave suboctave
• Variable XLR balanced out
• EQ with variable mid

A dream machine for the serious pro. Order today and play it right.

The power and features required by today's gigging bassist.

The rackmountable 2U SWR WorkingPro 700 Bass Amplifier head delivers 700W into 4 ohms. For tone shaping it combines a 4-band EQ with variable mids, SWR's Aural Enhancer circuitry, and a Bass Intensifier that boosts and compresses the lows. Other pro features include preamp gain and master controls, automatic limiter with defeat switch, blend control for sidechain effects, XLR balanced pre/post output, and a footswitch for Intensifier and mute functions.

SWR WorkingPro 700 Bass Amplifier Specifications:

• 700W @ 4 ohms; 450W @ 8 ohms
• 19"W x 3-1/2"H x 13-1/2"D
• 25 lbs.

SWR WorkingPro 700 Bass Amplifier Features:

• 700W @ 4 ohms; 450W @ 8 ohms
• -10dB pad option on input
• Mute switch (footswitchable)
• Independent preamp gain and master volume controls
• Exclusive SWR Aural Enhancer tone control
• 4-band active EQ with variable midrange
• Bass Intensifier with level and frequency cutoff controls (footswitchable)
• Automatic limiter with defeat option
• XLR balanced output with pre/post switch, ground lift and -10dB switch
• Side-chain effects loop with blend control
• Tuner out jack
• Unbalanced line out jack
• Headphone jack
• Footswitch jack for included 2-button switch (switches Intensifier and mute)
• 2 - 1/4" and 2 Speakon speaker jacks
• 5-year transferable warranty

Step up to SWR. Order today.

Very accurate studio sound.

4-ohm, 400W, 3-way speaker enclosure featuring a 15" woofer, 10" mid driver, and tweeter. The SWR Triad gets full range clarity like no other audio speaker system. 23"W x 27"H x 18.5"D. 80 lbs.

SWR Triad 3-Way Bass Speaker System Features:

• Bottom slot port
• Spring-loaded rubber grip handles
• Black Ozite carpeting with stack lock corners
• Chrome-stamped steel vibration-free grill
• High-quality metal input panel with heavy-duty attenuator
• 1/4" in/out and Speakon jacks
• Horn protection circuit

This loudspeaker lets you play with more assurance. Order today.

The WorkingPro 15 delivers massive low-end punch and clear SWR tone.

The true workhorse of the WorkingPro bass amp series, the WorkingPro 15 combines an elegant appearance with outstanding tone and performance. 200 watts of power are pumped through a 15" woofer and piezo tweeter for rich, full-range sound. The Bass Intensifier provides an instant low-end boost. The 3-band active EQ and Aural Enhancer make shaping your tone simple. A Wedge EQ feature compensates for lost tone when using the amp's tilt-back legs. A side-mounted monitor input lets it double as a powered monitor.

SWR WorkingPro 15 200 Watt 1x15" Bass Combo Amp Specifications:

• 200W
• 15" woofer and piezo tweeter
• 3-band EQ with sweepable mids
• Wedge EQ circuit
• XLR balanced and 1/4" unbalanced outputs
• Headphone jack
• Effects loop
• External speaker jack
• 22-1/2"W x 25"H x 17-1/4"D
• 68 lbs.

SWR WorkingPro 15 200 Watt 1x15" Bass Combo Amp Features:

• 200W
• 15" woofer and piezo tweeter for rich full-range sound
• Tilt-back legs
• Wedge EQ compensates for tonal changes in tilt-back operation
• Side-mounted monitor input
• 3-band active EQ with sweepable mids
• Aural enhancer
• Bass Intensifier boosts low end with ease
• Balanced line out
• Effects loop
• Mute button

Power, performance, and a pro look-everything you'd expect from an SWR combo. Call or click to order now!

The power and features required by today's gigging bassist.

The rackmountable, 2U SWR WorkingPro 400 Bass Amplifier head delivers 400W @ 4 ohms. For tone shaping it combines a 4-band EQ with variable mids, SWR's Aural Enhancer circuitry, and a Bass Intensifier that boosts and compresses the lows. Other pro features include preamp gain and master controls, automatic limiter with defeat switch, blend control for sidechain effects, XLR balanced pre/post output, and footswitch for Intensifier and mute.

SWR WorkingPro 400 Bass Amplifier Specifications:

• 400W @ 4 ohms; 250W @ 8 ohms
• 19"W x 3-1/2"H x 13-1/2"D
• 25 lbs.

SWR WorkingPro 400 Bass Amplifier Features:

• 400W @ 4 ohms; 250W @ 8 ohms
• -10dB pad option on input
• Mute switch (footswitchable)
• Independent preamp gain and master volume controls
• Exclusive SWR Aural Enhancer tone control
• 4-band active EQ with variable midrange
• Bass Intensifier with level and frequency cutoff controls (footswitchable)
• Automatic limiter with defeat option
• XLR balanced output with pre/post switch, ground lift and -10dB switch
• Side-chain effects loop with blend control
• Tuner out jack
• Unbalanced line out jack
• Headphone jack
• Footswitch jack for included 2-button switch (switches Intensifier and mute)
• 2 - 1/4" and 2 Speakon speaker jacks
• 5-year transferable warranty

Step up to SWR. Order today.

Serious low frequency reproduction!

This carpeted 1x18 sub woofer has a very fast 18" speaker. It can be used as a standalone or as part of a biamped system. Rear tube port produces oceans of deep frequency sound. Equipped with pro features such as spring-loaded rubber grip handles, Ozite carpeting; stack lock corners; and a chromed, stamped steel, vibration-free grille. Includes a 2-year parts and labor warranty.

SWR Big Ben 1x18 Bass Speaker Specifications:

• 23"W x 30.5"H x 18.5"D
• 73 lbs.
• 400 Watts RMS 8 Ohms Response Suggested Amplifiers
• -6dB @ 25Hz and 3kHz

SWR Big Ben 1x18 Bass Speaker Features:

• Fast 18" speaker
• Rear tube port
• Spring-loaded rubber grip handles
• Rugged Ozite covering
• 2-year parts and labor warranty

SWR Big Ben 1x18 Bass Speaker Includes:

• 2-year parts and labor warranty

Get some serious bottom end - order it today!