Achieve nirvana.

The Bill Dickens 212 is like a standard Accugroove cab, but with customized speakers and circuitry built to handle the extreme levels of punishment dealt out by the Buddha. It brings together 2 - 12" woofers, an 8" midrange, and 2 high-frequency tweeters in one unique, 3-way bass cab. The Bill Dickens 212 has the same premium construction as other Accugroove cabs, with each driver housed in its own individual enclosure specifically tuned for optimal response. Accugroove uses premium 3/4" void-free plywood with traditional dado and rabbet joints. It also has the same steel vibration-free grille; self-resetting protection circuit for midrange and high-frequency drivers; stackable locking corners; comfortable recessed handles; reliable 1,000W crossover circuit; and removable casters, but has only 2 Speakon jacks for higher power handling.

Accugroove Bill Dickens Signature 212 Bass Cabinet Features:

• 2 - 12" woofers
• 8" midrange driver
• 2 high-frequency tweeters
• Lightweight neodymium-magnet speakers
• Individual, specifically tuned cabinet-within-a-cabinet enclosures
• High-grade, 3/4" void-free birch plywood
• Rabbet and dado joints
• Black steel vibration-free grille
• Self-resetting protection circuit for midrange and tweeters
• Can be placed on side or upright
• Metal input panel
• Stackable, locking corners
• Comfortable recessed handles
• Reliable 1,000W crossover circuit
• 2 Speakon jacks
• Removable casters
• 1,000W handling @ 4 ohms
• Frequency response: 33Hz-18kHz
• 102dB SPL
• 24-3/4"W x 27-3/4"H x 18-1/4"D
• 85 lbs.

If you're serious about audiophile-quality amplification for your bass, this is your cab. Order today!

Achieve nirvana.

The Bill Dickens Signature Sub applies Accugroove engineering to a subwoofer customized to handle the extreme levels of punishment dealt out by the Buddha. It brings together 2 - 12" woofers in a unique sub that goes all the way down to 28Hz! The Bill Dickens Sub has the same premium construction as other Accugroove cabs, with each driver housed in its own individual enclosure specifically tuned for optimal response. Accugroove uses premium 3/4" void-free plywood with traditional dado and rabbet joints. It also has the same steel vibration-free grille; stackable locking corners; comfortable recessed handles; and removable casters, but has only 2 Speakon jacks for higher power handling.

Accugroove Bill Dickens Signature Sub Bass Cabinet Features:

• 2 - 12" subwoofers
• Lightweight neodymium-magnet speakers
• Individual, specifically tuned cabinet-within-a-cabinet enclosures
• High-grade, 3/4" void-free birch plywood
• Rabbet and dado joints
• Black steel vibration-free grille
• Can be placed on side or upright
• Metal input panel
• Stackable, locking corners
• Comfortable recessed handles
• 2 Speakon jacks
• Removable casters
• 1,400W handling @ 4 ohms
• Frequency response: 28Hz-1kHz
• 101dB SPL
• 24-3/4"W x 27-3/4"H x 18-1/4"D
• 93 lbs.

If you're serious about audiophile-quality amplification for your bass, this is your cab. Order today!

Massive output in a manageable size.

Physically and sonically the Accugroove El Whappo bass cab is big. It's got more moxie and mojo than most standard backline rigs. It can easily replace your 8x10 or multi-cab stack but probably weighs less (only 88 lbs.). The grandaddy of Accugroove's unique four-way cabs, the El Whappo brings together a 15" subwoofer, 12" woofer, 6" midrange, and 2 high-frequency tweeters in one cab.

Accugroove uses custom, lightweight neodymium-magnet speakers, and houses them in their own individual enclosure specifically tuned for optimal response. Every panel in an Accugroove cabinet is constructed from premium 3/4" void-free plywood using traditional dado and rabbet joints. Each cab has lots of other quality features: steel vibration-free grille; self-resetting protection circuit for midrange and high-frequency drivers; stackable locking corners; comfortable recessed handles; reliable 1,000W crossover circuit; 2 sealed 1/4" jacks; 2 Speakon jacks; and removable casters.

Accugroove El Whappo Bass Cabinet Specifications:

• 800W handling @ 4 ohms
• Frequency response: 35Hz-18kHz
• 102dB SPL
• 24-3/4"W x 32-1/4"H x 18-1/4"D
• 88 lbs.

Accugroove El Whappo Bass Cabinet Features:

• 15" subwoofer
• 12" woofer
• 6" midrange
• 2 high-frequency tweeters
• Lightweight neodymium-magnet speakers
• Individual, specifically tuned cabinet-within-a-cabinet enclosures
• High-grade, 3/4" void-free birch plywood
• Rabbet and dado joints
• Black steel vibration-free grille
• Self-resetting protection circuit for midrange and tweeters
• Can be placed on side or upright
• Metal input panel
• Stackable, locking corners
• Comfortable recessed handles
• Reliable 1,000W crossover circuit
• 2 sealed 1/4" jacks
• 2 Speakon jacks
• Removable casters
• 800W handling @ 4 ohms
• Frequency response: 35Hz-18kHz
• 102dB SPL
• 24-3/4"W x 32-1/4"H x 18-1/4"D
• 88 lbs.

If you're serious about audiophile-quality sound for your bass, this is your cab. Order today!

3-way cab that covers the entire bass range without holes or hernias!

The Accugroove Tri110L is for players looking for incredibly accurate and hi-fi sound in a 1x10 cab. The Tri110L brings together a 10" woofer, a 6" midrange, and 2 high-frequency tweeters in one unique, 3-way bass cab.

Accugroove uses custom, lightweight neodymium-magnet speakers, and houses them in their own individual enclosure specifically tuned for optimal response. Every panel in an Accugroove cabinet is constructed from premium 3/4" void-free plywood using traditional dado and rabbet joints. Each cab has lots of other quality features: steel vibration-free grille; self-resetting protection circuit for midrange and high-frequency drivers; stackable locking corners; comfortable recessed handles; reliable 1,000W crossover circuit; 2 sealed 1/4" jacks; 2 Speakon jacks; and removable casters.

Accugroove Tri110L Bass Cabinet Features:

• 10" woofer
• 6" midrange driver
• 2 high-frequency tweeters
• Lightweight neodymium-magnet speakers
• Individual, specifically tuned cabinet-within-a-cabinet enclosures
• High-grade, 3/4" void-free birch plywood
• Rabbet and dado joints
• Black steel vibration-free grille
• Self-resetting protection circuit for midrange and tweeters
• Can be placed on side or upright
• Metal input panel
• Stackable, locking corners
• Comfortable recessed handles
• Reliable 1,000W crossover circuit
• 2 sealed 1/4" jacks
• 2 Speakon jacks
• Removable casters
• 300W handling @ 8 ohms
• Frequency response: 43Hz-18kHz
• 100dB SPL
• 15-1/2"W x 21-1/4"H x 17-1/4"D
• 36 lbs.

If you're serious about audiophile-quality amplification for your bass, this is your cab. Order today!

A one-cabinet-does-it-all box!

The Accugroove Tri112L is for players looking for incredibly accurate and hi-fi sound in a 1x12 cab. The Tri112L brings together a 12" woofer, a 6" midrange, and 2 high-frequency tweeters in one unique, 3-way bass cab.

Accugroove uses custom, lightweight neodymium-magnet speakers, and houses them in their own individual enclosure specifically tuned for optimal response. Every panel in an Accugroove cabinet is constructed from premium 3/4" void-free plywood using traditional dado and rabbet joints. Each cab has lots of other quality features: steel vibration-free grille; self-resetting protection circuit for midrange and high-frequency drivers; stackable locking corners; comfortable recessed handles; reliable 1,000W crossover circuit; 2 sealed 1/4" jacks; 2 Speakon jacks; and removable casters.

Accugroove Tri112L Bass Cabinet Features:

• 12" woofer
• 6" midrange driver
• 2 high-frequency tweeters
• Lightweight neodymium-magnet speakers
• Individual, specifically tuned cabinet-within-a-cabinet enclosures
• High-grade, 3/4" void-free birch plywood
• Rabbet and dado joints
• Black steel vibration-free grille
• Self-resetting protection circuit for midrange and tweeters
• Can be placed on side or upright
• Metal input panel
• Stackable, locking corners
• Comfortable recessed handles
• Reliable 1,000W crossover circuit
• 2 sealed 1/4" jacks
• 2 Speakon jacks
• Removable casters
• 400W handling @ 8 ohms
• Frequency response: 39Hz-18kHz
• 100dB SPL
• 16-1/2"W x 21-1/4"H x 17-1/4"D
• 38 lbs.

If you're serious about audiophile-quality amplification for your bass, this is your cab. Order today!

El Whappo impact in a more portable cab!

The Accugroove Tri115L is for players looking for incredibly accurate and hi-fi sound in a 1x15 cab. The Tri115L brings together a 15" woofer, a 6" midrange, and 2 high-frequency tweeters in one unique, 3-way bass cab. Combine with the Tri112L for a hi-fi stack to play the big gigs with!

Accugroove uses custom, lightweight neodymium-magnet speakers, and houses them in their own individual enclosure specifically tuned for optimal response. Every panel in an Accugroove cabinet is constructed from premium 3/4" void-free plywood using traditional dado and rabbet joints. Each cab has lots of other quality features: steel vibration-free grille; self-resetting protection circuit for midrange and high-frequency drivers; stackable locking corners; comfortable recessed handles; reliable 1,000W crossover circuit; 2 sealed 1/4" jacks; 2 Speakon jacks; and removable casters.

Accugroove Tri115L Bass Cabinet Features:

• 15" woofer
• 6" midrange driver
• 2 high-frequency tweeters
• Lightweight neodymium-magnet speakers
• Individual, specifically tuned cabinet-within-a-cabinet enclosures
• High-grade, 3/4" void-free birch plywood
• Rabbet and dado joints
• Black steel vibration-free grille
• Self-resetting protection circuit for midrange and tweeters
• Can be placed on side or upright
• Metal input panel
• Stackable, locking corners
• Comfortable recessed handles
• Reliable 1,000W crossover circuit
• 2 sealed 1/4" jacks
• 2 Speakon jacks
• Removable casters
• 500W handling @ 8 ohms
• Frequency response: 38Hz-18kHz
• 101dB SPL
• 24-3/4"W x 21-1/4"H x 18-1/4"D
• 52 lbs.

If you're serious about audiophile-quality amplification for your bass, this is your cab. Order today!

Audiophile-approved cab that goes lower than most 4x10s!

The Accugroove Tri210L is for players looking for incredibly accurate and hi-fi sound in a 2x10 cab. The Tri210L brings together 2 - 10" woofers, a 6" midrange, and 2 high-frequency tweeters in one unique, 3-way bass cab.

Accugroove uses custom, lightweight neodymium-magnet speakers, and houses them in their own individual enclosure specifically tuned for optimal response. Every panel in an Accugroove cabinet is constructed from premium 3/4" void-free plywood using traditional dado and rabbet joint. Each cab has lots of other quality features: steel vibration-free grille; self-resetting protection circuit for midrange and high-frequency drivers; stackable locking corners; comfortable recessed handles; reliable 1000W crossover circuit; 2 sealed 1/4" jacks; 2 Speakon jacks; and removable casters.

Accugroove Tri210L Bass Cabinet Features:

• 2 - 10" woofers
• 6" midrange driver
• 2 high-frequency tweeters
• Lightweight neodymium-magnet speakers
• Individual, specifically tuned cabinet-within-a-cabinet enclosures
• High-grade, 3/4" void-free birch plywood
• Rabbet and dado joints
• Black steel vibration-free grille
• Self-resetting protection circuit for midrange and tweeters
• Can be placed on side or upright
• Metal input panel
• Stackable, locking corners
• Comfortable recessed handles
• Reliable 1000W crossover circuit
• 2 sealed 1/4" jacks
• 2 Speakon jacks
• Removable casters
• 600W handling @ 4 ohms
• Frequency response: 39Hz-18kHz
• 103dB SPL
• 24-3/4"W x 21-1/4"H x 18-1/4"D
• 57 lbs.

If you're serious about audiophile-quality amplification for your bass, this is your cab. Order today!

21' of total low-frequency domination!

The Whappo Grande is a sub like no other. It's massive 21" driver delivers notes down to low F# with authority. If you've got to go low, this is your sub.

Accugroove uses custom, lightweight neodymium-magnet speakers, and houses them in their own individual enclosure specifically tuned for optimal response. Every panel in an Accugroove cabinet is constructed from premium 3/4" void-free plywood using traditional dado and rabbet joint. Each cab has lots of other quality features: steel vibration-free grille; self-resetting protection circuit for midrange and high-frequency drivers; stackable locking corners; comfortable recessed handles; reliable 1,000W crossover circuit; 2 sealed 1/4" jacks; 2 Speakon jacks; and removable casters.

Accugroove Whappo Grande Bass Cabinet Features:

• 21" subwoofer
• High-grade, 3/4" void-free birch plywood
• Rabbet and dado joints
• Black steel vibration-free grille
• Self-resetting protection circuit for midrange and tweeters
• Can be placed on side or upright
• Metal input panel
• Stackable, locking corners
• Comfortable recessed handles
• 2 sealed 1/4" jacks
• 2 Speakon jacks
• Removable casters
• 800W handling @ 8 ohms
• Frequency response: 22Hz-400Hz
• 98dB SPL
• 32-1/4"W x 24-3/4"H x 18-1/4"D
• 85 lbs.

If you're serious about audiophile-quality amplification for your bass, this is your cab. Order today!

More portable than the El Whappo and still packs a whallop!

The Accugroove Whappo Jr. was designed for players who want the full Accugroove experience but without the transportation issues an El Whappo owner faces. Junior brings together a 12" subwoofer, 12" woofer, 6" midrange, and 2 high-frequency tweeters in one unique, 4-way bass cab.

Accugroove uses custom, lightweight neodymium-magnet speakers, and houses them in their own individual enclosure specifically tuned for optimal response. Every panel in an Accugroove cabinet is constructed from premium 3/4" void-free plywood using traditional dado and rabbet joint. Each cab has lots of other quality features: steel vibration-free grille; self-resetting protection circuit for midrange and high-frequency drivers; stackable locking corners; comfortable recessed handles; reliable 1000W crossover circuit; 2 sealed 1/4" jacks; 2 Speakon jacks; and removable casters.

Accugroove Whappo Jr. Bass Cabinet Features:

• 12" subwoofer
• 12" woofer
• 6" midrange driver
• 2 high-frequency tweeters
• Lightweight neodymium-magnet speakers
• Individual, specifically tuned cabinet-within-a-cabinet enclosures
• High-grade, 3/4" void-free birch plywood
• Rabbet and dado joints
• Black steel vibration-free grille
• Self-resetting protection circuit for midrange and tweeters
• Can be placed on side or upright
• Metal input panel
• Stackable, locking corners
• Comfortable recessed handles
• Reliable 1000W crossover circuit
• 2 sealed 1/4" jacks
• 2 Speakon jacks
• Removable casters
• 800W handling @ 4 ohms
• Frequency response: 39Hz-18kHz
• 102dB SPL
• 24-3/4"W x 27-3/4"H x 18-1/4"D
• 69 lbs.

If you're serious about audiophile-quality amplification for your bass, this is your cab. Order today!

Specifically designed for acoustic-electric bass.

The AB50 Bass Combo Amp is the first amplifier specifically designed for Acoustic-Electric Bass. The 50W AB50 is a 1x10 amplifier that offers you simple operation, great bass tone and dashing looks. Two combination XLR/1/4" input jacks so that you can plug a high or low impedance device into either channel. Stereo 1/8" Line-in and headphone jack enables you to jam with your favorite CDs or MP3s right through your amp, without ticking the neighbors off.

Acoustic brand amps have always been known for their durability and simplicity. Designed by musicians, they sport unique and useful features, have outstanding tone, and are louder and more powerful than many similarly priced amps.

Acoustic AB50 Acoustic Bass Combo Amplifier Features:

• First amp designed for use with an acoustic bass
• 50W
• 10" speaker + tweeter
• Tilt back wedge shaped cabinet
• 2 dual purpose inputs (1/4" & XLR Mic)
• Independent volume controls
• 1/8" Stereo Line-in & Headphone
• Simple operation
• Tolex covering
• Nickel corners
• Aluminum capped knobs
• Session handles
• Rubber feet
• Poly-cone, rubber surround with high-frequency tweeter
• Blue accents, white type
• Blue LED
• Grey speaker cones
• Black grille
• White piping

Save BIG when you buy today!

Great tone for practice or low level jams.

The B20 bass combo amp from Acoustic offers you simple operation, great bass tone and dashing looks. Dual 1/4" input jacks mean you don't have to search for adapters or direct boxes anymore. Stereo 1/8" Line-in and headphone jack let you to jam with your favorite CDs or MP3s right through your amp, without ticking the neighbors off.

Acoustic brand amps have always been known for their durability and simplicity. Designed by musicians, they sport unique and useful features, have outstanding tone, and are louder and more powerful than many similarly priced amps.

Acoustic B20 1x12 Bass Combo Amplifier Features:

• 20W
• 12" speaker
• Mp3 player input
• Headphone out
• Dual 1/4" input jacks
• 1/8" Stereo Line-in & Headphone
• Simple operation
• Tolex covering
• Nickel corners
• Aluminum capped knobs
• Acoustic branded strap handle
• Rubber feet
• Full range bass driver
• Blue accents, white type
• Blue LED
• Grey speaker cones
• Black grille
• White piping

Order today and enjoy a simple, inexpensive, but very likable amp.

A head for big bottom end sound.

The Acoustic B200H professional head is designed for large club and live applications where it will fill any stage with depth and definition. Used in conjunction with the B115 and/or B410 enclosures, the B200H will easily drive either one or two cabinets in any combination of your choice.

The two bass inputs are designed to accommodate both active and passive bass instruments while the Gain and Volume controls give you complete control over the character of your tone. Increase the gain for some old school rock tones, or lower it and turn up the volume for great clean, classic or funk tones. The preamp includes a very natural and tube-like compression as well as a harmonically rich distortion circuit, which keeps your tone musical-even at high volume levels. The B200H also includes a notch filter to tailor your mids, and a six-band EQ for exact control over every nuance of your bass s tone.

Rear panel features include a parallel Effects Loop, and XLR balanced Line Out with Level Control and Ground Lift. The two speaker output jacks allow you to directly connect to each enclosure (such as the B115 and/or B410) to maximize your tone and power.

The heritage of Acoustic comes through loud and clear in the B200H-a seriously professional stage head for serious bassists.

Acoustic B200H 200W Bass Head Features:

• Extra goodies:
• Ground Lift, Effect Loop
  
  Options:
• B115 1x15 Bass Cabinet
• B410 4x10 Bass Cabinet
• Power: 200 Watts @ 4 Ohms
• Speaker: 15" Heavy-duty speaker, built-in horn
• Channels: 1
• EQ: 6-Band EQ - sweepable
• Frequency notch filter
• Inputs: dual inputs (passive & active)
• Outs: XLR direct out

Save BIG when you buy today!

Wall-shaking lows and massive bottom end.

The Acoustic B410 professional enclosure is designed for large club and live applications where it will fill any stage with depth and definition. Used in conjunction with the Acoustic B200H head, the B410 will easily handle the power of the amplifier and provide wall-shaking lows and massive bottom end. Although conservatively rated at 400 watts RMS, any combination of B115 or B410 cabinets may be used for larger venues.

The B410 features a rock-solid, sealed design with heavy internal bracing, caster sockets and professional spring-loaded touring handles with rubber grips. Heavy-duty rubber feet allow secure stacking and ensure solid placement on any floor surface. Rear panel features include a recessed jackplate with parallel dual 1/4 jacks and a horn on/off switch.

Classic Acoustic cosmetics include nickel corners, black grille cloth with white piping, heavy-duty road-worthy covering material and steel trim strips with understated blue accent color. It all adds to the durability (and legacy vibe) of this great cabinet.

The heritage of Acoustic comes through loud and clear in the B410-a seriously professional stage enclosure for serious bassists.

Acoustic B410 400W 4x10 Bass Cabinet Features:

• Other goodies: heavy-duty tour handles, damage resistant vinyl covering, caster sockets
• Power: 400 watts power handling
• Speaker: 4 x 10" heavy-duty speakers, high-frequency with on/off switch
• Impedance: 8 Ohms
• Input: Parallel 1/4" Input Jacks

Save BIG when you buy today!

High-power, light weight, killer sound quality, and 4-band active EQ.

Combine 500 watts of power with a 4 band active EQ and you have an amp for any style of music and any size venue. With a blendable FX loop, pure sounding D.I., and tuner out this versatile head has all of the professional features without the price.

Aguilar AG 500SC Single Channel Bass Head Specifications:

• Tone controls:
• Bright: +5dB >4kHz shelving
• Treble: ±13dB @ 4kHz shelving
• High Mid: +/- 14dB @ 800Hz peaking
• Low Mid: +/- 14dB @ 400Hz peaking
• Bass: +/- 18dB @ 40Hz shelving
• Deep: +6dB <100Hz shelving
  
  FX Loop: Series/Parallel
• Send pot is push/pull for line or instrument level
• Return pot is push/pull for parallel or series operation
• Outputs: 2 Neutrik Speakon and 2 speaker outputs, XLR balanced
• D.I. out with Pre and Post EQ switch, tuner output
• Mute: Push button with LED (footswitch optional)
• Size: 2 rack spaces, 17" W X 3-1/2" H X 10" D
• Weight: 18 lbs.

Aguilar AG 500SC Single Channel Bass Head Features:

• 500W
• 18 lbs.
• 2 rackspaces
• 4-band active EQ
• Front-panel FX loop
• Front-panel D.I.
• Bright and deep switches

This baby will never let you down no matter what your manager throws at you. Order now.

The DB 112 speaker cab from Aguilar combines full low-end extension with punchy midrange. A heavy-duty cast frame Eminence driver is mounted in a rear-ported 13-ply Baltic birch enclosure to create a high-efficiency cabinet that will be focused, musical and sound louder than other boxes of similar size.

Aguilar DB 112 Speaker Cabinet Specifications:

• Dimensions: 14"H x 19"W x 19"D
• 13-ply, void free Baltic Birch
• Weight: 45 lbs
• Warranty: Three year limited
• Optional: Padded Cover

Aguilar DB 112 Speaker Cabinet Features:

• One 12" cast frame woofer, 56 oz. magnet
• Power handling: 300 watts
• Impedance: 8 ohms
• Phenolic tweeter with integral phase plug
• Custom crossover with variable tweeter control
• One Neutrik Speakon and two 1/4" inputs
• Frequency response: 42 Hz to 16 kHz
• Sensitivity: 95 dB 1W 1M
• Deluxe Strap Handle
• Metal Corners, Rubber Feet

This cab will sound great and look cool on any stage. Call or click today to order.

Combining raw power and excellent tone.

A hybrid design, the Aguilar DB 750 Bass Head combines a discrete solid-state power section and all-tube preamp circuits. It's a bass head that runs safely under 2-, 4-, or 8-ohm loads, and its 750W power rating (at 4 ohms) is measured well within the usable operating range of the amp. Controls include treble, mid, and bass EQs; deep switch; bright switch; a push/pull to select line or instrument level on the effects loop pot. Connections include active and passive inputs, a tube-buffered DI with Jenson transformer balanced output (-40 pre and post EQ), a tuner out, 2 Speakon outputs, and one XLR balanced output. Custom Aguilar toroidal power transformer completes the DB 750 Bass Head.

Aguilar DB 750 Bass Head Features:

• Hybrid design with discrete solid-state power section and all-tube preamp section
• Runs safely under 2-, 4-, or 8-ohm loads
• 750W at 4 ohms, 975W at 2 ohms
• Controls include treble, mid, and bass EQs; deep switch; bright switch; a push/pull to select line or instrument level on the effects loop pot
• Connections include active and passive inputs, a tube-buffered DI with Jenson transformer balanced output (-40 pre and post EQ), a tuner out, 2 Speakon outputs, and one XLR balanced output
• Custom Aguilar toroidal power transformer

It's one of the biggest bass head available and should be yours. Order today.

Powerful sound delivery system!

The Aguilar GS 112 Single 12" Bass Speaker Cabinet combines a power-hungry driver with full-range response to deliver tone with incredible punch and clarity. It features a 300-watt cast-frame driver with 56-oz. magnet, adjustable tweeter with phase plug, custom crossover, heavy-duty handle, 1/4" and Speakon inputs, and 7-ply void-free Philippine mahogany. 3-year limited warranty.

Aguilar GS 112 Single 12" Bass Speaker Cabinet Specifications:

• Dimensions: 19"W x 14"H x 18"D
• Weight: 42 lbs.
• 3-year limited warranty

Aguilar GS 112 Single 12" Bass Speaker Cabinet Features:

• Custom 300W cast-frame driver with 56-oz. magnet
• Frequency response: 42Hz-16kHz ±2dB
• Sensitivity: 102dB @ 1w-1m
• Adjustable tweeter with phase plug
• Custom crossover
• Heavy-duty spring-loaded handle
• Speakon and 1/4" inputs
• 7-ply void-free Philippine mahogany
• Interlocking corners

Aguilar GS 112 Single 12" Bass Speaker Cabinet Includes:

• 3-year limited warranty

Time to upgrade your bass cab to Aguilar quality - DO IT TODAY!

Put a little extra thunder under your Aguilar stack.

The GS 112NT speaker cabinet is the perfect companion to the Aguilar GS 112 cabinet and the AG500-112C combo (See recommended accessories box on this page). This tweeterless version of the GS 112 features a custom 12" Eminence driver, Neutrik Speakon and 1/4" inputs, 7-ply void-free Philippine mahogany construction, and interlocking corners.

Aguilar GS 112NT 1x12 Bass Cabinet Features:

• Custom 300W Eminence driver with 56 oz. magnet
• Sensitivity: 102db @ 1w-1m
• Heavy-duty spring loaded handle
• Speakon and 1/4" inputs
• 7-ply void-free Philippine mahogany
• Interlocking corners
• Dimensions: 19"W x 14"H x 18"D
• Weight: 40 lbs.
• 3-year limited warranty

Now you can speak softly and carry a small cab. Perfect! Order this premium low-end loudbox today.

Tight and punchy.

2 - 12" cast frame woofers with 56 oz. magnets handle up to 600W and give you a solid, defined deep bass. A phenolic tweeter with integral phase plug lets you dial in just the right amount of edge. Neutric Speakon and 1/4" inputs. Recessed handles. Interlocking corners. 24"H x 22-1/2"W x 16-5/8"D. Includes removable casters.

Aguilar GS 212 Bass Cab Specifications:

• Dimensions: 22-1/2""W x 24"H x 16-5/8"D
• Weight: 70 lbs.

Aguilar GS 212 Bass Cab Features:

• 2 - 12" cast frame woofers with 56 oz. magnets
• Power handling: 600 watts
• Impedance: available in 4 or 8 ohms
• Phenolic tweeter with integral phase plug
• Custom crossover with variable tweeter control
• One Neutrik Speakon and 2 - 1/4" inputs
• Frequency response: 41 Hz to 16 kHz
• Sensitivity: 103 dB @ 1W 1M
• Casters included
• Recessed deep-dish handles
• Interlocking corners
• 7-ply, void-free Philippine mahogany
• Weight: 70 lbs.
• 3-year limited warranty

Aguilar GS 212 Bass Cab Includes:

• removable casters and limited 3-year warranty

It'll make whatever amp you have sound better. Order today.

Rough and ready high-fidelity bass sound.

The best thing about this massive air-moving marvel? It's way lighter than most comparable 8x10 cabs and is easy to move thanks to a tilt-back design with built-in rear-mounted wheels (less prone to tipping) and recessed top- and side-mounted deep-dish handles. Plus, your sound benefits from 4 custom-designed, cast-frame Aguilar 12" speakers with 56 oz. magnets. They easily handle all the lows while keeping things nice and punchy. Adjust the custom crossover and phenolic tweeter right on the back of the cab to dial in just the right amount of high-end snap.

All Aguilar GS Series cabinets feature cast-frame drivers, phenolic tweeters with integral phase plug, variable tweeter level control, Neutrik Speakon and 1/4" inputs, 7-ply, void-free Philippine mahogany construction, and interlocking corners.

Aguilar GS 412 Bass Cabinet Specifications:

• Power handling: 1200W
• Impedance: 4 ohms
• One Neutrik Speakon and 2 - 1/4" inputs
• Frequency response: 37Hz to 16kHz
• Sensitivity: 104dB @1W1M
• Dimensions: 23-1/4"W x 45"H x 17"D
• Weight: 116 lbs.

Aguilar GS 412 Bass Cabinet Features:

• Top- and side-mounted handles
• Built-in rear mounted wheels
• 4 - 12" cast frame woofers w/56 oz. magnets
• Phenolic tweeter with integral phase plug
• Custom crossover with variable tweeter control
• 7-ply, void free Philippine mahogany construction

Knock 'em down with the amount of sound this baby produces. Order now.