You'll marvel that an amp as small as the Gallien-Krueger MB150S-112 MicroBass Combo Amp can sound this great. 150W RMS combo with a heavy-duty 12" speaker and a host of pro features packed into a rugged, all-metal cab that weighs only 24 lbs. and fits into an overhead luggage compartment. Perfect for small gigs, rehearsals, or studio. Or mount on a stand as a personal monitor and use direct outs to feed PA or recording. For larger stage performances, switch off internal speaker, plug into 2 - 8-ohm cabs, and you're ready to rock. Features a 4-band EQ and a user-activated limiter to eliminate distortion. 1-year warranty on speaker. 2-year warranty on electronics.

Gallien-Krueger MB150S-112 MicroBass Combo Amp Features:

• 150W RMS of pure power
• Heavy-magnet 12" driver
• Tough all-metal cab
• 4-band EQ
• 1 year warranty on speakers
• 2 year warranty on electronics

Carry it in one hand, power double stacks if necessary. One amp for all needs. Order today.

The excellent MB2 Ultra Light Bass amplifier head is fully equipped with professional features: master and gain, padded input, contour, 4-band active EQ, footswitchable boost, tuning mute, effects loop, isolated DI, Speakon combo outputs, headphone/line out, and 500W of power into 4-ohm loads.

Gallien-Krueger MB2-500 Ultra Light Bass Amplifier Head Specifications:

• Dimensions: 11"W x 1-3/4"H x 7-3/4"D
• Weight: 3 lbs.12 oz.

Gallien-Krueger MB2-500 Ultra Light Bass Amplifier Head Features:

• 500W at 4 ohms, 350W at 8 ohms
• 10dB pad
• Tuning Mute
• Input Gain, Master
• Contour
• 4-band active EQ
• Footswitchable boost with independent volume
• Effects Loop & Tuner out
• Transformer Isolated DI out with Pre/Post Switch and Ground Lift
• Dual Speakon Combo Outputs
• Headphone/Line Out
• Footswitch Input

Lighten your load and beef up your sound. Order the MB2 today!

Now you can get the Gallien-Krueger MB2-500 Ultra Light Bass Amp Head and the Neo410 Bass Speaker Cabinet all in one rocking kit.

The MB2-500
This ultra-light, under-4-pound bass amplifier head is fully equipped with professional features: master and gain, padded input, contour, 4-band active EQ, footswitchable boost, tuning mute, effects loop, isolated DI, Speakon combo outputs, headphone/line out, and 500W of power into 4-ohm loads.

The Neo410
The Gallien-Krueger Neo410 bass speaker cabinet offers you high-powered performance without breaking your back during transport. Part of GK's Neo Series speaker cabinets, at the Neo410 cab's core are 4 10" GK Paragon cast-frame neodymium loudspeakers. The speakers maintain high power output while producing silky-smooth natural tone with consistent response from top to bottom. They've also been designed with reduced weight for your gigging convenience. Removable casters help you move the cab easily.

The Neo410 speaker cab provides plenty of definition in the highs and mids with an abundance of fat, punchy low end. This bass cab may be used in standard full-range operation or with GK's innovative Horn Bi-Amp System. Special chambering and bracing have been incorporated in the cabinet design to eliminate standing waves so that nothing gets in the way of your performance. Other features include a high-quality horn, black Tolex covering, recessed spring-loaded handles, rugged steel grille, custom interlocking corners, and 11-ply poplar construction.

SP1000 Speakon Speaker Cable
This kit also includes a Monster Studio Pro 1000 Speaker Cable. It achieves Monster's ultimate performance standard for both studio and live applications. Uses 3 Time Correct multi-gauge wire networks for extreme accuracy in imaging. It's ultra quiet and backed by Monster's lifetime guarantee.

Gallien-Krueger MB2 Ultra Light Bass Amp Head and NEO410 Cab Stack Features:

• MB2-500:
• 500W at 4 ohms, 350W at 8 ohms
• 10dB pad
• Tuning Mute
• Input Gain, Master
• Contour
• 4-band active EQ
• Footswitchable boost with independent volume
• Effects Loop & Tuner out
• Transformer Isolated DI out with Pre/Post Switch and Ground Lift
• Dual Speakon Combo Outputs
• Headphone/Line Out
• Footswitch Input
• Dimensions: 11" W x 1-3/4" H x 7-3/4" D
• Weight: Less than 4lb.
  
  Neo410 Speaker Cabinet
• GK Paragon cast-frame neodymium loudspeakers
• Special chambering and bracing
• High-quality horn
• Black Tolex covering Recessed spring-loaded handles
• Rugged steel grille
• Custom interlocking corners
• 11-ply poplar construction
• Removable castors
• Impedance: 8 ohms
• Power Rating: 800 Watts
• Speakers: 4x10" plus horn
• Frequency response: 45 Hz to 19 kHz
• Usable Low Frequency: 31 Hz
• Sensitivity: 98 dB
• Connectors: 1/4" & Speakon
• Porting: Front-ported
• Dimensions: 23-1/2" W x 26-1/2" H x 18-1/2"D
• Weight: 78lb.
  
  SP1000 Speaker Cable (3 ft.)
• Precision Time Correct windings with separate wire networks provide excellent soundstage performance
• Heavy-gauge Bass Control Conductor for improved low frequency punch and dynamics
• Magnetic Flux Tube improves bass response and natural sonic characteristics
• Extra-flexible Duraflex outer jacket for superior reliability and cut resistance

Take your earth-shaking sound everywhere you go—order this GK kit now.

The Neo 1001/212 Bass Combo pairs the high powered Artist Series amp head with the popular Neo Series speakers. It's designed for easy transport, ruggedness, compact size, and to deliver the warm tone and output that leads to exceptional musical performance. The combo includes GK's Horn Bi-Amp system which is supported by GK Neo, SBX and RBH series speaker cabinets. The Neo 1001/212 amplifier provides the best in bass sound and is priced to rank among the best values in bass gear.

Gallien-Krueger Neo 1001/212 Bass Combo Specifications:

• Power <1% THD: 460 Watts (700 Watts With Extension Cabinet)
• Cooling: Continuously Variable Speed Fan.
• Input Section: Ultra Low Noise S/N>90dB, Clip Led, -14dB Pad, Volume, Mute Switch And Mute Led
• Voicing Filter: 5/4 String Voicing, Adjustable Contour And Presence
• Equalizer: Four Band Active
• Output: Boost, Tweeter Level With Hi-Cut Switch And Woofer Level With Hi-Cut Switch
• Direct Out: XLR, Neutrick Speakon X2, Send Out Impendance: 220 Ohm, Di Out: 500 Ohms
• Patching: Send, Return And Tuner Out
• Speaker Output: Two 1/4" And Two Horn Bi-Amp Compatible Speakon Connectors
• Woofer: 2xGK Paragon 10b200-16 Cast Frame 12", 300w 16 Ohm High Presence Voice Coil
• Tweeter: Gk-Paragon 5h50-8
• Construction: 11-Ply Poplar, Tolex, 16 Gauge Steel Grill, Lock 'N Roll Transport System, Custom Tooled Interlocking Corners, Front Ported
• Weight: 84 Lbs.
• Dimensions: 21"W X 30 "H X 16"D

Call or click today to order!

The Gallien-Krueger Neo 115 Bass Cab is a high-powered bass cab built to deliver silky-smooth, solid tone with less weight. This compact roadworthy, front-ported cab is loaded with a custom-designed, cast-frame 15" neodymium speaker. Neodymium speakers are lighter than traditional speakers, but deliver the same robust performance. Tuned for a consistent response from top to bottom, there is plenty of definition in the highs and mids, coupled with a fat low-end. The cabinet also features GK's bi-amp system; Speakon-style and 1/4" connectors; 300W power handling; rugged 11-ply poplar construction; Tolex covering; reinforced, interlocking corners; 16-gauge steel grill; and removable casters.

Gallien-Krueger Neo 115 1x15 Bass Speaker Cabinet Features:

• 300W power handling
• 1 GK-Paragon stamped-frame 15" neodymium woofer
• GK-Paragon tweeter
• 8 ohms impedance
• 36Hz-19kHz frequency response
• 104dB sensitivity
• Crossover circuit with bi-amp/full range switch, horn power limiter, and high frequency attenuator
• 1 Speakon, 1 - 1/4"
• 11-ply poplar construction
• Black tolex covering
• 16-gauge steel grill
• Removable nickel-plated casters
• Custom-tooled interlocking corners
• Front-loaded ports
• 54 lbs.
• 21"W x 23"H x 16"D

Delivers the professional, solid GK tone and punch you want. Order now!

The Gallien-Krueger Neo410 is a bass speaker cabinet that offers you high-powered performance without breaking your back during transport. Part of GK's Neo Series speaker cabinets, at the Neo 410 cab's core are 4 - 10" GK Paragon cast-frame Neodymium loudspeakers. The speakers maintain high power output while producing silky-smooth natural tone with consistent response from top to bottom. And they've been designed with reduced weight for your gigging convenience. Removable casters help you move the cab easily.

The Neo410 speaker cab provides plenty of definition in the highs and mids with an abundance of fat, punchy low end. This bass cab may be used in standard full-range operation or with GK's innovative Horn Bi-Amp System. Special chambering and bracing have been incorporated in the cabinet design to eliminate standing waves so that nothing gets in the way of your performance. Other features include a high-quality horn, black Tolex covering, recessed spring-loaded handles, rugged steel grille, custom interlocking corners and 11-ply poplar construction.

Gallien-Krueger Neo 410 4 x 10 Bass Speaker Cabinet Specifications:

• Impedance: 8 ohms
• Power Rating: 800 Watts
• Speakers: Four 10", plus horn
• Frequency response: 45Hz to 19kHz
• Useable Low Frequency: 31Hz
• Sensitivity: 98dB
• Connectors: 1/4" & Speakon
• Porting: Front Ported
• Dimensions: 23.5"W x 26.5"H x 18.5"D
• Weight: 78 lbs.

Gallien-Krueger Neo 410 4 x 10 Bass Speaker Cabinet Features:

• GK Paragon cast-frame neodymium loudspeakers
• Special chambering and bracing
• High-quality horn
• Black Tolex covering Recessed spring-loaded handles
• Rugged steel grille
• Custom interlocking corners
• 11-ply poplar construction
• Removable castors

Add the Neo410 to your gigging setup and notice the difference it makes on your sound and your body. Order today.

The Gallien-Krueger Neo 412 bass cab a high-powered bass cab built to deliver silky-smooth, solid tone with less weight. This compact roadworthy, front-ported cab is loaded with four custom-designed, cast-frame 12" neodymium speakers. Neodymium speakers are lighter than traditional speakers, but deliver the same robust performance. Tuned for a consistent response from top to bottom, there is plenty of definition in the highs and mids, coupled with a fat low-end. The cabinet also features GK's bi-amp system; Speakon-style and 1/4" connectors; 1,200W power handling; rugged 11-ply poplar construction; Tolex covering; reinforced, interlocking corners; 16-gauge steel grill; a pair of 3" dolly wheels; and an easy-grip handlebar.

Gallien-Krueger Neo 412 4x12 Bass Speaker Cabinet Features:

• 1200W power handling
• 1 GK-Paragon stamped-frame 15" neodymium woofer
• GK-Paragon tweeter
• 4 ohms impedance
• 36Hz-19kHz frequency response
• 107dB sensitivity
• Crossover circuit with bi-amp/full range switch, horn power limiter, and high frequency attenuator
• 1 Speakon, 1 - 1/4"
• 11-ply poplar construction
• Black tolex covering
• 16-gauge steel grill
• Tilt-back handle and wheels
• Custom-tooled interlocking corners
• Front-loaded ports
• 54 lbs.
• 25-3/4"W x 40"H x 16"D

Delivers the professional, solid GK tone and punch you want. Order now!

The Gallien-Krueger Neo210 is a bass speaker cabinet that offers high-powered performance through two 10" GK Paragon cast-frame Neodymium loudspeakers and a high-quality horn. These lightweight speakers maintain a high level of output, producing a silky-smooth, natural tone with consistent response from top to bottom. You'll love the definition it gives you in the highs and mids while delivering ample amounts of fat, punchy low end. This cab may be used in standard full-range operation or with GK's innovative Horn Bi-Amp System. Special chambering and bracing have been incorporated into it's design to eliminate standing waves so that nothing distorts your performance. Other features include black Tolex covering, recessed spring-loaded handles, a rugged steel grille, custom interlocking corners, and 11-ply poplar construction. And, weighing only 45 pounds, it won't break your back after an exhausting gig.

Gallien-Krueger Neo210 2 x 10 Bass Speaker Cabinet Specifications:

• Impedance: 8 ohms
• Power Rating: 400 Watts
• Speakers: Two 10", plus horn
• Frequency response: 43Hz to 19kHz
• Useable Low Frequency: 31Hz
• Sensitivity: 97dB
• Connectors: 1/4" & Speakon
• Porting: Front Ported
• Dimensions: 23.5"W x 19.5"H x 18.5"D
• Weight: 45 lbs.

Gallien-Krueger Neo210 2 x 10 Bass Speaker Cabinet Features:

• GK Paragon cast-frame Neodymium loudspeakers
• Special chambering and bracing
• High-quality horn
• Black Tolex covering Recessed spring-loaded handles
• Rugged stell grills
• Custom interlocking corners
• 11-ply poplar construction

Rich tones at an affordable price. Add an excellent GK bass cab to your setup by ordering the Neo210 today!

The NEOX-112T is a powerful, full-bodied single 12" bass enclosure designed to produce the full spectrum of bass tones with stunning clarity and it easily handles the fundamentals of 5-string basses. Bottom-mounted, tilt-back design makes the NEOX-112T ideal for high output on tight stages.

GNX 12300 Neodymium Loudspeaker The custom-designed, 12" neodymium cast-frame loudspeaker is rated at 300W RMS and utilizes a 2-1/2", aluminum edge-wound, high-temperature voice coil. The 7 oz. neodymium magnet assembly is encased in a large heatsink for exceptional cooling. The paper cone, spider, and dust cap have been calibrated to deliver the low-frequency support and midrange articulation that today's bassists demand.

Genz Benz NEOX-112T 300W 1x12" Bass Cabinet Specifications:

• 300W RMS handling
• Frequency response: 45Hz-18kHz
• Sensitivity 1W/1M: 98dB
• Impedance: 8 ohms
• Crossover point: 4kHz
• 21-1/4"W x 18"H x 16-1/2"D
• 37 lbs.

Genz Benz NEOX-112T 300W 1x12" Bass Cabinet Features:

• 300W RMS
• 12" neodymium loudspeaker
• Dual Edge porting system for increased low-frequency projection
• Bottom-mounted, tilt-back handle

The NEOX-112T has earned a stellar reputation for its outstanding tone, clarity, and articulate response in a portable cabinet. Call or click to order now!

The coupling of the 2 neodymium loudspeakers with the X porting of the cabinet combine to project round, solid, explosive sound on any stage. The lightweight design, Edge Lift handles and tilt-back casters make it a breeze to move around. Each loudspeaker is rated at 300W RMS and utilizes a 2-1/2" aluminum edge-wound, high-temperature voice coil. The 7-ounce neodymium magnet assembly is encased in a large heatsink structure for exceptional cooling. The paper cone, spider, and dust cap have been calibrated to deliver the low-frequency support and midrange articulation that today's bassists demand. The ideal companion to the GBE 400 and GBE 600 bass heads!

Genz Benz NEOX-212T 600W 2x12 Bass Cabinet Specifications:

• Frequency response: 42Hz-18kHz
• 4 ohms
• Sensitivity: 101dB (1W/1M)
• Dimensions: 21-1/4"W x 31"H x 16-1/2"D
• 62 lbs.

Genz Benz NEOX-212T 600W 2x12 Bass Cabinet Features:

• 600W RMS handling
• 2 - 12" neodymium loudspeakers with 2-1/2" voice coil
• Dual edge porting places a shelf port in each corner of the baffle face for increased low-frequency support and projection
• Edge Lift handles and tilt-back casters make for easy transport

Bright, punchy tone in a compact cab. Call or click to order yours today!

This compact, 8 ohm extension cabinet from Genz Benz was made to be used in conjunction with any of the Shuttle combos. It features a 10" custom-sourced, cast-frame neodymium woofer and a tweeter with attenuation control, and will free more output from your rig. The speaker cab itself is made of birch-ply with heavy-duty vinyl covering.

Genz Benz Shuttle 1x10 Bass Speaker Cabinet Specifications:

• Power handling RMS: 200W
• Frequency ± 10db: 56-20K Hz
• Sensitivity 1W/1M: 97db
• Nominal impedance: 8 ohm
• Crossover point: 5kHz
• Dimensions: 14"W x 12.5"H x 11.75"D
• Weight: 16 lbs.

Genz Benz Shuttle 1x10 Bass Speaker Cabinet Features:

• 200 W
• Custom sourced cast-frame 10" neodymium loudspeaker Custom sourced soft-dome neodymium tweeter with attenuation control.
• The cab is a Birch-ply, with heavy duty vinyl covering
• Rear-ported for full responses
• Protected corners
• Speaker grill

Give your Shuttle more power with this tiny extension cab. Order yours today.

The 3.0-10T amp from the Shuttle series was developed by Genz•Benz for professional players who require an easily transported, great sounding, and flexible bass amplifier system that is also full-featured.

The heart of the Shuttle series is the lightweight amplifier design. This 2.75 lb. amp is available as a "head only" or in combo versions, such as this one, delivering 175 watts at 8 ohms and 300 watts at 4 ohms with an external speaker cab. In the combo models, the amp chassis can be easily removed from it's combo "saddle" in seconds and carried to a larger gig in the pocket of your bass case or the available carry bag.

The head is extremely useful as a standalone unit, with a headphone output that is excellent for quiet, personal practice sessions. You can adjust the volume level and tone you hear with the preamp, and, using the Post EQ setting on the DI, you can turn the Shuttle into an outstanding preamp for recording.

The Shuttle 3.0-10T amp gives you an ultra compact combo that delivers plenty of output and tone. The ported enclosure combines a 10" neodymium loudspeaker and soft-dome neodymium tweeter in a compact 18.75 lb. package easily usable in a variety of venues. It comes with a bottom-mounted kickstand for projecting the sound back upwards towards you while you're performing.

Genz Benz Shuttle 3.0-10T 300W 1x10 Bass Combo Specifications:

• Power: 175W/8 ohms; 300W/4 ohms
• Cabinet response: 56 - 20kHz
• Speaker configuration: 1x 10" & tweeter
• Preamp type: FET
• Dimensions: 14"W x 15.5"H x 11.75"D
• Weight: 18.75 lbs. as combo, 16 lbs. for cab, 2.75 lbs. for head

Genz Benz Shuttle 3.0-10T 300W 1x10 Bass Combo Features:

• Shuttle 3.0 head
• High current, Class D power amplifier
• Extended range input gain for active/passive sensitivity
• Active EQ w/parametric mids
• 3-band signal shape circuit
• Tuner out
• Headphone jack
• Aux. input
• Limiter circuit
• LED status indicators
• Speakon and 1/4" speaker outputs
• Full XLR direct out interface
  
  Bass cab
• Custom sourced cast-frame 10" neodymium loudspeaker Custom sourced soft-dome neodymium tweeter with attenuation control.
• The cab is a Birch-ply, with heavy duty vinyl covering
• 175W as combo/300W with ext. cab
• Removable amp chassis
• Rear-ported for full responses
• Protected corners
• Speaker grille

Give your bass more power without taking up too much space. Order this combo today!

The 3.0 bass amp from the Shuttle series was developed by Genz•Benz for professional players who require an easily transported, great sounding, and flexible bass amplification system that is also full-featured.

The heart of the Genz-Benz Shuttle series is the lightweight amplifier design. This 2.75 lb. amplifier is available as a "head only" or in combo versions delivering 175 watts at 8 ohms and 300 watts at 4 ohms. In the combo models, the amp chassis can be easily removed from it's combo "saddle" in seconds and carried to a larger gig in the pocket of your bass case or the available carry bag.

The amp head is extremely useful as a standalone unit, with a headphone output that is excellent for quiet, personal practice sessions. You can adjust the volume level and tone you hear with the preamp, and, using the Post EQ setting on the DI, you can turn the Shuttle into an outstanding preamp for recording.

The Shuttle features power, punch, tone, versatility, and Genz•Benz quality in a lightweight package. Whether you have fly-in dates, in-home recording or practice sessions, here is a bass solution that is ready to go where you need to, easily fitting in your gig bag.

Genz Benz Shuttle 3.0 300 Watt Lightweight Bass Amp Specifications:

• Power: 175W/8 ohms; 300W/4 ohms
• Preamp type: FET
• Weight: 2.75 lbs.
• Dimensions: 8.5"W x 2 3/8"H x 9.25"D

Genz Benz Shuttle 3.0 300 Watt Lightweight Bass Amp Features:

• High current, Class D power amplifier
• Extended range input gain for active/passive sensitivity
• Active EQ w/parametric mids
• 3-band signal shape circuit
• Tuner out
• Headphone jack
• Aux. input
• Limiter circuit
• LED status indicators
• Speakon and 1/4" speaker outputs
• Full XLR direct out interface

Add this small but effective bass amp to your rig for a nice boost of power and sound. Order one today.

The Shuttle series was developed by Genz•Benz for professional players who require an easily transported, great sounding, and flexible bass system that is also full-featured.

The heart of the Shuttle series is the lightweight amplifier design. This 2.75 lb. amplifier is available as a "head only" or in combo versions, such as this one, delivering 175 watts at 8 ohms and 300 watts at 4 ohms. In the combo models, the amp chassis can be easily removed from it's combo "saddle" in seconds and carried to a larger gig in the pocket of your bass case or the available carry bag.

The head is extremely useful as a standalone unit, with a headphone output that is excellent for quiet, personal practice sessions. You can adjust the volume level and tone you hear with the preamp, and, using the Post EQ setting on the DI, you can turn the Shuttle into an outstanding preamp for recording.

However, with the Shuttle 3.0-8T, you get an ultra compact combo that delivers impressive output and tone. The ported enclosure combines an 8" neodymium loudspeaker and soft-dome neodymium tweeter in a "micro" 13.5 lb. package. The power rating is 175 watts; 300 watts with an optional extension cabinet.

Genz Benz Shuttle 3.0-8T 300 Watt Lightweight Bass 1x8 Combo Specifications:

• Power: 175W/8 ohms; 300W/4 ohms
• Cabinet response: 58 - 20kHz
• Speaker configuration: 1x 8" & tweeter
• Preamp type: FET
• Dimensions: 11-7/8"W x 13.5"H x 10.75"D
• Weight: 13.5 lbs. as combo

Genz Benz Shuttle 3.0-8T 300 Watt Lightweight Bass 1x8 Combo Features:

• Shuttle 3.0 head
• High current, Class D power amplifier
• Extended range input gain for active/passive sensitivity
• Active EQ w/parametric mids
• 3-band signal shape circuit
• Tuner out
• Headphone jack
• Aux. input
• Limiter circuit
• LED status indicators
• Speakon and 1/4" speaker outputs
• Full XLR direct out interface
  
  Bass cab
• Custom sourced cast-frame 8" neodymium loudspeaker Custom sourced soft-dome neodymium tweeter with attenuation control.
• The cab is a Birch-ply, with heavy duty vinyl covering
• 175W as combo/300W with ext. cab
• Removable amp chassis
• Rear-ported for full responses
• Protected corners
• Speaker grill

Boost your sound with this convenient, compact combo. Order one today!

The Shuttle series was developed by Genz•Benz for professional players who require a flexible, full-featured bass system that is easily transportable and still sounds great.

The heart of the Shuttle series is the lightweight Shuttle 6.0 amplifier design. This 3.75 lb. amplifier is available as a "head only" or in combo versions, such as this one, delivering 375 watts at 8 ohms and 600 watts at 4 ohms. In the combo models, the amp chassis can be easily removed from it's combo "saddle" quickly and carried to another gig in the pocket of your bass case or the available carry bag. The chassis has a handle that makes carrying the other half of the combo, the cab, just as easy to take with you.

The head is extremely useful as a standalone unit, with a headphone output that is excellent for quiet, personal practice sessions. You can adjust the volume level and tone you hear with the analog 12AX7 tube preamp, and, using the Post EQ setting on the DI, you can turn the Shuttle 6.0 into an outstanding preamp for recording. It also has an extended range input gain for active/passive sensitivity, effects loop, limiter circuit, LED status indicators, Speakon speaker outputs, tuner out, full XLR direct out interface, aux. input, and a headphone jack

The Shuttle 6.0-12T adds a rear-ported, Birch-ply enclosured amp that combines Genz•Benz's GNX12300 neodymium 10" loudspeaker with a custom sourced bullet tweeter with attenuation control for a bass combo that is as versatile as it is pleasing to the ear.

Genz Benz Shuttle 6.0-12T 600 Watt Lightweight Bass 1x12 Combo Specifications:

• Dimensions: 18-3/8"W x 21.75"H x 14.25"D
• Weight: 32 lbs. total, 3.75 lbs. amp head, 28.25 lbs. cab
• Power: 375W/8 ohms; 600W/4 ohms
• Preamp type: Tube
• Speaker config: 1 x 12" & tweeter
• Cab response: 45-18kHz

Genz Benz Shuttle 6.0-12T 600 Watt Lightweight Bass 1x12 Combo Features:

• Shuttle 6.0 amp head
• Analog 12AX7 tube preamp
• Digital SMPS (switch mode power supply)
• High-current Class D amplifier
• Active EQ w/parametric mids
• 3-band signal shape circuit (footswitchable)
• Signal mute switch (footswitchable)
• Tuner out
• Extended range input gain for active/passive sensitivity
• Limiter circuit
• LED status indicators
• Speakon speaker outputs
• Internal fan cooling
• Full XLR direct out interface
• Aux. input
• Headphone jack
• Effects loop
• Optional footswitch available
  
  Bass cab
• Custom sourced cast-frame 12" neodymium loudspeaker Custom sourced bullet tweeter with attenuation control
• The cab is a Birch-ply, with heavy duty vinyl covering
• 175W as combo/300W with ext. cab
• Removable amp chassis
• Rear-ported for full responses
• Protected corners
• Speaker grill

Crank up the bass with this unique combo. Order yours today!

Genz•Benz's amplifiers from the Shuttle series was created for on-the-move bassists who need a flexible, full-featured combo system that is easily transportable and sounds good too.

The core of the series is the lightweight Shuttle amplifier design. The 6.0 weighs only 3.75 lbs. and delivers 375 watts at 8 ohms and 600 watts at 4 ohms. Though this is a combo, the amp chassis can be easily removed from it's combo "saddle" quickly and carried to another gig in the pocket of your bass case or the available carry bag. The chassis has a handle too that makes carrying the cab, just as easy.

The head is extremely useful as a standalone unit, with a headphone output that is excellent for quiet, personal practice sessions. You can adjust the volume level and tone you hear with the analog 12AX7 tube preamp, and, using the Post EQ setting on the DI, you can turn the Shuttle 6.0 into an outstanding preamp for recording. It also has an extended range input gain for active/passive sensitivity, effects loop, limiter circuit, LED status indicators, Speakon speaker outputs, tuner out, full XLR direct out interface, aux. input, and a headphone jack

The cab portion of the 6.0-12T combo is a rear-ported, Birch-ply enclosured amp that combines 2 Genz•Benz GNX12300 neodymium 10" loudspeakers with a custom sourced bullet compression tweeter with attenuation control for a bass combo that is as versatile as it is pleasing to the ear. It's also got a bottom-mounted, tilt-back stand for angling the speaker cab towards you while you perform.

Genz Benz Shuttle 6.0-210T 600 Watt Lightweight Bass 2x10 Combo Specifications:

• Dimensions: 18-3/8"W x 27.75"H x 14.25"D
• Weight: 41 lbs. total, 3.75 lbs. amp head, 37.25 lbs. cab
• Power: 375W/8 ohms; 600W/4 ohms
• Preamp type: Tube
• Speaker config: 2 x 10" & tweeter
• Cab response: 45-18kHz

Genz Benz Shuttle 6.0-210T 600 Watt Lightweight Bass 2x10 Combo Features:

• Shuttle 6.0 amp head
• Analog 12AX7 tube preamp
• Digital SMPS (Switch Mode power supply)
• High-current Class D amplifier
• Active EQ w/parametric mids
• 3-band signal shape circuit (footswitchable)
• Signal mute switch (footswitchable)
• Tuner out
• Extended range input gain for active/passive sensitivity
• Limiter circuit
• LED status indicators
• Speakon speaker outputs
• Internal fan cooling
• Full XLR direct out interface
• Aux. input
• Headphone jack
• Effects loop
• Optional footswitch available
  
  Bass cab
• Custom sourced cast-frame 12" neodymium loudspeaker Custom sourced bullet compression tweeter with attenuation control.
• The cab is a Birch-ply, with heavy duty vinyl covering
• 175W as combo/300W with ext. cab
• Bottom mounted, tilt-back stand
• Removable amp chassis
• Rear-ported for full responses
• Protected corners
• Speaker grill

Big bang for your buck. Little pain on your back and pocketbook. Order today!

The Shuttle 6.0 bass amplifier blends analog and digital platforms to produce plenty of warmth, punch, and a generous 600 watts of power for its size. The signal path utilizes a 12AX7 tube preamp with Genz•Benz active EQ and responsive signal shape circuitry. An optional footswitch is available for use with the Signal Mute and three Signal Shaping circuits. The power amp section is a high-power CLASS D module, which also incorporates a switch mode power supply. It has an effects loop option, extended range input gain for active/passive sensitivity, a Limiter circuit, Speakon speaker outputs, full XLR direct out interface, aux, input, LED status indicators and more.

The Shuttle series from Genz•Benz also incorporates a highly innovative removable amp chassis design that allows you to pull out the lightweight amp head from its saddle and transport it inside a gig bag. It's a high-powered bass solution that doesn't sacrifice and tone or power, yet gives you the freedom of easy transportability.

Genz Benz Shuttle 6.0 600 Watt Lightweight Bass Amp Specifications:

• Dimensions: 10"W x 2.5"H x 10.5"D
• Weight: 3.75 lb Design
• Power: 375W/8 ohms; 600W/4 ohms
• Preamp type: Tube

Genz Benz Shuttle 6.0 600 Watt Lightweight Bass Amp Features:

• Analog 12AX7 tube preamp
• Digital SMPS (switch mode power supply)
• High-current Class D amplifier
• Active Analog 12AX7 tube preamp
• Digital SMPS (Switch Mode power supply)
• High-current Class D amplifier
• Active EQ w/parametric mids
• 3-band signal shape circuit (footswitchable)
• Signal mute switch (footswitchable)
• Tuner out
• Extended range input gain for active/passive sensitivity
• Limiter circuit
• LED status indicators
• Speakon speaker outputs
• Internal fan cooling
• Full XLR direct out interface
• Aux. input
• Headphone jack
• Effects loop
• Optional footswitch available w/parametric mids

Kick it up a notch with this highly portable amp head. Order one today!

This rumbler has 30 watts driving the 10" woofer. With features like reverb; overdrive depth, master, and boost controls; treble, mid, and high tone knobs; you can dial your sound in with precision. Also has high and low inputs, a mic input with level control, effects loop, headphone jack, and footswitch input. Loaded with features at a steal of a price! 14"W x 17"H x 7-1/2"D.

Hiwatt Bulldog 30 Watt Bass Amplifier Specifications:

• 14"W x 17"H x 7-1/2"D

Hiwatt Bulldog 30 Watt Bass Amplifier Features:

• 30 watts
• 10" bass driver
• Master and volume controls
• Treble, mid, and bass tone controls
• High, low, and CD/tape inputs
• External cabinet output
• Headphone jack

The Bulldog combines great tone and plenty of control in an affordable package. Order now.

This 10W dedicated bass amp has 3-band EQ and presence control. Its closed back design and 6" speaker with headphone out make it ideal for backstage warming up and for beginners in need of loud sound.

Save BIG when you buy today!

The Ibanez SWX100 Bass Combo Amplifier has a 15" speaker making it the big daddy of the Ibanez SWX bass combo series. The SWX100 also boasts a piezo horn tweeter as well as an active 3-band EQ with tweeter on-off switch, Effects Send and Return, direct out with Pre/Post Switch, ground lift switch line out, and more.

All the Ibanez SWX Series bass amplifiers are equipped with internal auto compression circuitry, which minimizes distortion and keeps the sound clean and powerful. SWX bass combo amps also have HUE Control which adjusts overall tonal character. Ibanez equips the SWX bass combos with a Bright switch, which changes the sound character from passive bass tone to active bass, and a Shape switch, which givse you a high and low boost and mid cut sound.

Ibanez SWX100 100W 1x15 Bass Combo Amp Specifications:

• Dimensions: 20.5"W x 26.9"H x 12.3"D
• Weight: 53.4 lbs.

Ibanez SWX100 100W 1x15 Bass Combo Amp Features:

• 100 Watt dedicated bass amp
• 15" speaker with Piezo horn tweeter with on/off switch
• Active 3-band EQ and HUE control
• Auto-Comp circuit
• Shape switch and Bright swtich
• Direct Out (XLR) with pre/post switch
• Ground Lift Switch line out
• Effects Send and Return
• Master Volume control
• CD/MP3 input
• Headphones out
• Line out
• Effects Send and Return
• Closed back with Tilt-up system
• Casters for easytransportation
• Protected corners
• Speaker grille

Make a huge difference in your bass sound in more ways than one. Order this combo amp today.