2008 marks the 20th anniversary of a love affair between bassists and one of the most influential bass combo amplifiers in history the SWR Redhead. The original Redhead was a revolution in bass guitar amplification, combining SWR's crystal-clear, full-range tube preamp with a robust solid-state power platform into a rock solid, yet easily portable 2X10 cabinet. Loaded with two state-of-the-art 10" speakers and a high frequency horn, the Redhead bass amp sounded simply phenomenal and offered unprecedented patching options designed to meet the needs of discerning bassists, whether playing live or in the studio.

In celebration of the 20th anniversary, SWR raises its own bar with the newly redesigned Redhead bass amplifier. Two custom-designed Eminence drivers and a Foster horn provide the excellent sound, while several design and feature innovations make this more than just a product face lift. It's a whole new Redhead with lots of control and I/O options to entice any bassist. Fall in love again, with SWR's Redhead Bass Combo Amp.

SWR Redhead Bass Combo Amp Specifications:

• Weight: 95 lbs. (with cover)
• Dimensions: 22.5"W x 21.25" x 16"D (16.75" with the front cover attached)
• Power Handling: 400W (internal @ 4 ohms), 650 watts (@ 2 ohms with 4 ohm extension speaker)
• Tube Complement: Two 12AX7 (Preamp & Tube DI)
• Input Impedance:
• Passive: 1MOhm
• Active: 130kOhm
• Effects Return: 10kOhm
• Output impedance:
• Effects Send: 220 ohms
• Tuner send: 220 ohms
• Tube DI line out: 600 ohms
• Signal-to-noise ratio: -74 dB (<10 milivolts typical)
• Crossover: Third order, 6db rolloff, 18db butterworth high pass 4KHz turnover

SWR Redhead Bass Combo Amp Features:

• 2 - 10" custom-designed 8-ohm Eminence drivers
• One Foster horn
• 1-channel
• Classic SWR preamp with Aural Enhancer
• 2 -12AX7 Preamp Tubes - (Preamp & Tube DI)
• Front ported (slot) eliminates unwanted noise
• All-tube studio-quality Direct Out with front-panel controls including ground lift, level pad, and mute
• 3-band active EQ with variable midrange, pull turbo (ultra-low) and transparency (ultra-high) controls
• SWR compressor circuit
• Tuning Mute
• Side-chain effects loop with Blend control
• Single empty rack space for tuner or effects unit
  
  Front Panel:
• Tuning Mute
• Internal Speaker Defeat switch
• Tube Direct Out Mute
• Steel reinforced front cover/tilt-back stand
• Cabinet-mounted attenuator for Foster horn
• Tuning mute (sliding switch)
• 1/4" inputs (Active & Passive)
• Gain control (with Pre Amp clip LED)
• Aural Enhancer control
• Bass control (with "Pull Turbo")
• Mid-Range Level control
• Mid-range Frequency control
• Treble control (with "Pull Transparency")
• Compressor control (with Compression LED)
• Master Volume control (with Power Amp clip LED)
• Tube DI Line/Direct (sliding switch)
• Tube DI Mute/Line (sliding switch)
• Tube DI Ground Lift (sliding switch)
• Tube DI Pad control
• 1/4" Headphone jack
• Effects Blend control
• Internal Speaker On/Off (rocker switch)
• Power On/Off (rocker switch)
  
  Back Panel:
• AC power outlet (120V version only)
• AC power input
• 1/4" internal speaker jack
• Speakon & 1/4" external speaker jacks
• 1/4" Tuner Out jack
• Effects Loop (1/4" Send/Return)
• Tube DI Outputs (XLR & 1/4")
  
  5/8" 7-ply, maple or birch plywood construction with waterproof glue
• All joints Dado and Rabbet, glued and nailed
• Extremely heavy bracing
• Black carpeting with stack lock corners and chrome stamped steel vibration-free grille
• Protective steel-reinforced front cover (doubles as tilt-back stand)
• Removable casters
• Cooling fan
• 5-year transferable limited electronic warranty

A classic redux. Get your Redhead today and see why it's survived in an ever-changing world. Order today!

The SWR SM-900 Bass Amp has the power, the sound, and the versatility bass players dream of. It can be run mono, stereo, or biamped and delivers 350W RMS stereo and 800W mono into 4 ohms. It has 2 independent and footswitchable 3-band, semi-parametric EQs, sidechain stereo and mono effects loops, an effects blend control, tuner send, adjustable limiter, a built-in crossover, and an XLR record out with pad and ground lift. Fan cooled, rackmountable.

SWR SM-900 Bass Amp Specifications:

• DIMENSIONS: 19" W x 3-9/20" H x 13-3/4" D
• WEIGHT: 26 lbs.
• POWER OUTPUT:
• Bridge/Mono Mode 900 Watts @ 4 Ohms, 650 Watts @ 8 Ohms, 440 Watts @ 16 Ohms (minimum load = 4 Ohms)
• Stereo Mode (per side): 400 watts @ 4 Ohms, 240 watts @ 8 Ohms, 144 watts @ 16 Ohms (minimum load = 2 Ohms)
  
  DISTORTION:
• Power Amplifiers (Effects Return Jack "in"): 0.03% THD
• I.M. Distortion: 0.06%
• System Distortion (Gain and Master Volume full, Enhancer at minimum
• and Tone controls set flat): 0.4% THD
• SIGNAL TO NOISE RATIO: -75dB (<8 millivolts typical)
• EQUIVALENT INPUT NOISE: 8.9 microvolts
• INPUT IMPEDANCE:
• Passive/Active Input: 800kOhms
• Active Input: 60kOhms
• Effects Return: 27K Ohms
  
  OUTPUT IMPEDANCE
• Effects Send: 100 Ohms
• Tuner Send: 100 Ohms
• XLR:1.5kOhms
• Crossover High and Low Outs: 100 Ohms
• SUGGESTED SPEAKER ENCLOSURES
• Megoliath
• Goliath Senior
• Big Bertha
• Goliath III
• SUGGESTED SPEAKER COMBINATIONS
• (2) Goliath IIIs
• (2) Son Of Berthas
• (1) Goliath III & (1) Son Of Bertha
• (1) Goliath III & (1) Big Ben

SWR SM-900 Bass Amp Features:

• FRONT PANEL:
• All tube preamp gain stages
• Dual independent input jacks compatible for both active and passive instruments
• Gain control with LED peak clipping indicator
• Limiter with variable threshold control
• Exclusive Aural Enhancer circuitry
• Master volume control w/clip LED indicator
• Active bass and treble controls
• 2 independent switchable
• 3-band semi-parametric EQs
• EQ footswitch
• Effects blend control
• Tuner send
• Electronic crossover
• Rackmountable
• Bi Amp Crossover Point Control: 100Hz to 1000Hz
• Crossover Slope: 12 dB per octave
• Rack Handles
• REAR PANEL:
• Stereo and Mono Effects Loop
• Balanced XLR Output with select switch for Line or Direct Mode
• Ground lift & pad control
• High and Low Crossover Outputs
• Power Amp Assign Switch selects Bridge or Stereo Mode
• SPEAKER OUTPUTS:
• 2 - 1/4" jacks each for Left and Right Stereo Out
• One Speakon jack for Left and Right Side Output
• One Speakon Output Jack for Mono Operation
• Speaker fuses (x2): 3AG, 10 Amp, Fast Blo
• Line Fuse: 3AG, 8 Amp, Slow Blo
• On/Off Switch
• INTERNAL:
• (1) 12AX7 Preamp Tube
• Cooling fan
• FREQUENCY RESPONSE: (Power amplifier): -3dB @ 20Hz and 40KHz
• SENSITIVITY:
• Full output, 8 ohm load, 100Hz
• Passive Input Jack: 50 millivolts
• Active Input Jack: 200 millivolts
• Power Amplifiers (Effects Return Jack "in"):1.6 volts
• DiISTORTION:
• Power Amplifiers (Effects Return Jack "in"): 0.03% THD
• I.M. Distortion: 0.06%
• System Distortion
• (Gain and Master Volume full, Enhancer at minimum
• and Tone controls set flat): 0.4% THD
• SIGNAL TO NOISE RATIO: -75dB (<8 millivolts typical)
• EQUIVALENT INPUT NOISE: 8.9 microvolts
• INPUT IMPEDANCE:
• Passive/Active Input: 800kOhms
• Active Input: 60kOhms
• Effects Return: 27kOhms
• OUTPUT IMPEDANCE:
• Effects Send: 100 Ohms
• Tuner Send: 100 Ohms
• XLR:1.5kOhms
• Crossover High and Low Outs: 100 Ohms
• SUGGESTED SPEAKER ENCLOSURES:
• Megoliath
• Goliath Senior
• Big Bertha
• Goliath III
• SUGGESTED SPEAKER COMBINATIONS:
• (2) Goliath IIIs
• (2) Son Of Berthas
• (1) Goliath III & (1) Son Of Bertha
• (1) Goliath III & (1) Big Ben

You're serious about your music. Get a head that matches your commitment. Order today.

The SWR Spellbinder Blue combo amplifier features the iconic Baby Blue tube preamp — long treasured by sound engineers and bassists of all styles for its exceptionally clean, natural tone — housed in a stylish, lightweight Italian poplar cabinet. A 160-watt Class D amplifier with switch-mode power supply powers the Spellbinder Blue, driving a 10" SWR-designed neodymium speaker and Eminence super-tweeter. The result? A 27-lb. dynamo of portable, hi-fi tone that's well-suited to studio work and small-to-medium-sized stages.

SWR Spellbinder Blue 120V 1x10 In Bass Combo Amplifier Specifications:

• Power Output: 160 Watts
• Impedance (Ohms): 4 Ohms
• Speakers: (1) 10" SWR-Designed 4 Ohm Eminence Neodymium Driver, P/N 0076017000, (1) Custom Eminence Supertweeter, P/N 0067254000
• Channels: 1
  
  Front Panel Controls:
• Neutrik Combo Input Jack (XLR or 1/4")
• +15V Phantom Power On/Off Switch
• Gain
• -10dB Input Pad Switch
• Phase Switch
• Aural Enhancer
• Bass
• Mid
• Treble
• EQ In/Out Switch with LED Indicators
• Effects Blend
• Effects Bypass Switch
• Compression with LED Indicator
• Master
• Mute Switch with LED Indicator
  
  Rear Panel Controls:
• Speakon Speaker Input Jack (XLR or 1/4")
• Internal Speaker On/Off Switch
• Effects Loop (Send/Return)
• Headphone Out Jack
• Tuner Out Jack
• Balanced Outputs (XLR and 1/4")
• Line Out Pad
• XLR Ground Lift Switch
• Line/Direct Switch
  
  Cabinet:
• Horn Level Attenuator
• Covering: Anodized Blue Face Plate with Dark Blue Carpeting, Heavy Duty Corners and Chrome Stamped Steel Vibration-Free Grille
• Weight: 27 lb.
• Dimensions: 15-3/8" W x 19-1/2" H x 14-1/2" D
• Tube Complement: 1 12AX7 (Preamp)
• Cover: Uses Cover P/N 007-7463-000 (Not Included)

SWR Spellbinder Blue 120V 1x10 In Bass Combo Amplifier Features:

• 160 watts (Class D power amp w/ switch mode power supply)
• SWR tube preamp with 3-band active EQ
• 1x10" SWR-designed neodymium driver
• Eminence super-tweeter with rear Level control
• EQ In/Out switch w/ LED indicators
• +15V Phantom Power w/ On/Off switch

The distinctive Spellbinder Blue tone goes wherever you go—add it to the cart now.

4-ohm, 400W, 3-way speaker enclosure featuring a 15" woofer, 10" mid driver, and tweeter. The SWR Triad gets full range clarity like no other audio speaker system. 23"W x 27"H x 18.5"D. 80 lbs.

SWR Triad 3-Way Bass Speaker System Features:

• Bottom slot port
• Spring-loaded rubber grip handles
• Black Ozite carpeting with stack lock corners
• Chrome-stamped steel vibration-free grill
• High-quality metal input panel with heavy-duty attenuator
• 1/4" in/out and Speakon jacks
• Horn protection circuit

This loudspeaker lets you play with more assurance. Order today.

The WorkingPro 10 is a compact amp that's full of killer SWR tone. 100 watts of power are pumped through a 10" woofer and piezo tweeter for rich, full-range sound. The Bass Intensifier provides an instant low-end boost. The 3-band active EQ and Aural Enhancer make shaping your tone simple. A Wedge EQ feature compensates for lost tone when using the amp in tilt-back mode. A side-mounted monitor input lets it double as a powered monitor as well.

SWR WorkingPro 10 100 Watt 1x10 Bass Combo Amp Specifications:

• 100W
• 10" woofer and piezo tweeter
• 3-band EQ
• Wedge EQ circuit
• XLR balanced output
• Headphone jack
• Effects loop
• External speaker jack
• 17-9/10"W x 18-1/5"H x 15-3/10"D
• 41 lbs.

SWR WorkingPro 10 100 Watt 1x10 Bass Combo Amp Features:

• 100W of power provide surprising volume and headroom for an amp this size
• 10" woofer and piezo tweeter for rich full-range sound
• Tilt-back cabinet for multiple placement options
• Wedge EQ compensates for tonal changes in tilt-back operation
• Side-mounted monitor input
• 3-band active EQ
• Aural enhancer
• Bass Intensifier boosts low end with ease
• Balanced line out
• Effects loop
• Mute button

It's small on size but big on SWR tone and performance. Call or click to order now!

The WorkingPro 12 is a compact amp that's full of killer SWR tone. 200 watts of power are pumped through a 12" woofer and piezo tweeter for rich, full-range sound. The Bass Intensifier provides an instant low-end boost. The 3-band active EQ and Aural Enhancer make shaping your tone simple. A Wedge EQ feature compensates for lost tone when using the amp in tilt-back mode. A side-mounted monitor input lets it double as a powered monitor as well.

SWR WorkingPro 12 200 Watt 1x12" Bass Combo Amp Specifications:

• 200W
• 12" woofer and piezo tweeter
• 3-band EQ
• Wedge EQ circuit
• XLR balanced and 1/4" unbalanced outputs
• Headphone jack
• Effects loop
• External speaker jack
• 18-1/2"W x 22-1/2"H x 18-1/2"D
• 44 lbs.

SWR WorkingPro 12 200 Watt 1x12" Bass Combo Amp Features:

• 200W of power provide surprising volume and headroom for an amp this size
• 12" woofer and piezo tweeter for rich full-range sound
• Tilt-back cabinet for multiple placement options
• Wedge EQ compensates for tonal changes in tilt-back operation
• Side-mounted monitor input
• 3-band active EQ
• Aural enhancer
• Bass Intensifier boosts low end with ease
• Balanced line out
• Effects loop
• Mute button

It's small on size but big on SWR tone and performance. Call or click to order now!

It's a perfect cab for smaller gigs. 2 - 10" bass drivers and piezo tweeter. Carpet covered, heavy-duty grille, spring-loaded side handles, and specially tuned front port. 200W handling. 23-1/4"W x 20-1/4"H x 18-1/2"D. 60 lbs.

SWR WorkingPro 2x10 Bass Speaker Cabinet Specifications:

• 200W handling
• 8 ohms impedance
• 100dB max SPL
• 23-1/4"W x 20-1/4"H x 18-1/2"D
• 60 lbs.

SWR WorkingPro 2x10 Bass Speaker Cabinet Features:

• 2 - 10" bass drivers
• Piezo tweeter with attenuation control
• Black carpet covering
• Grille: SWR square-punched with chrome powdercoat
• Speakon and 1/4" connectors
• Spring-loaded side handles
• Removable casters
• Specially tuned front port
• 5-year transferable warranty

Equip yourself right with SWR. Order today.

The WorkingPro 2X10C offers 260W of power at 8 ohms (400 watts with an 8-ohm extension cabinet), housed in a tough, cool-looking cabinet with 2 - 10" speakers, a horn tweeter, and tilt-back legs. An ideal amp for nearly any performance, practice or recording situation.

Lots of tone shaping tools including SWR's exclusive Bass Intensifier circuit makes it a working bassist's dream machine. It sounds huge but is pleasingly portable.

SWR WorkingPro 2X10C Bass Combo Amp Specifications:

• Controls: Variable Tweeter Attenuator
• Frequency Response: 98 dB SPL @ 1W1M (-3dB @ 63Hz and 18.5KHz)
• SPL: 98 dB SPL @ 1W1M (-3dB @ 63Hz and 18.5KHz)
• Weight: 55 lbs.
• Dimensions: 23"W x 17"H x 16-1/4"W
  
  

SWR WorkingPro 2X10C Bass Combo Amp Features:

• 260W of power
• 2 - 10" Eminence speakers and Le Son TLX-1e horn tweeter
• Tilt-back legs
• Black carpet covering
• Stamped grille
• SWR preamp
• with Aural Enhancer
• Bass Intensifier circuit
• Wedge EQ circuit
• Side-mounted monitor input jack
• 3-Band Active EQ
• Headphone jack
• Effects Send & Return
• Unbalanced 1/4" & Balanced XLR Lines out

You can't beat it for huge bass tone. Order today.

The rackmountable, 2U SWR WorkingPro 400 Bass Amplifier head delivers 400W @ 4 ohms. For tone shaping it combines a 4-band EQ with variable mids, SWR's Aural Enhancer circuitry, and a Bass Intensifier that boosts and compresses the lows. Other pro features include preamp gain and master controls, automatic limiter with defeat switch, blend control for sidechain effects, XLR balanced pre/post output, and footswitch for Intensifier and mute.

SWR WorkingPro 400 Bass Amplifier Specifications:

• 400W @ 4 ohms; 250W @ 8 ohms
• 19"W x 3-1/2"H x 13-1/2"D
• 25 lbs.

SWR WorkingPro 400 Bass Amplifier Features:

• 400W @ 4 ohms; 250W @ 8 ohms
• -10dB pad option on input
• Mute switch (footswitchable)
• Independent preamp gain and master volume controls
• Exclusive SWR Aural Enhancer tone control
• 4-band active EQ with variable midrange
• Bass Intensifier with level and frequency cutoff controls (footswitchable)
• Automatic limiter with defeat option
• XLR balanced output with pre/post switch, ground lift and -10dB switch
• Side-chain effects loop with blend control
• Tuner out jack
• Unbalanced line out jack
• Headphone jack
• Footswitch jack for included 2-button switch (switches Intensifier and mute)
• 2 - 1/4" and 2 Speakon speaker jacks
• 5-year transferable warranty

Step up to SWR. Order today.

The SWR WorkingPro Bass Speaker has 4 - 10" drivers that make it tight and punchy and an adjustable piezo tweeter lets you top it off with just the right upper edge. Black carpet covering, heavy-duty vibration-free grille, spring-loaded side handles, removable casters, Speakon and 1/4" connectors, and specially tuned front port for focused bass guitar response. 400W handling. 100dB max SPL.

SWR WorkingPro 4x10 Bass Speaker Cabinet Specifications:

• 100dB max SPL
• 400W power handling
• 8 ohms impedance
• 23"W x 25-1/4"H x 18-1/3"D
• 97 lbs.

SWR WorkingPro 4x10 Bass Speaker Cabinet Features:

• 4 - 10" bass drivers
• Piezo tweeter with attenuation
• Black carpet covering
• Grille: SWR square-punched with chrome powdercoat
• Speakon and 1/4" connectors
• Spring-loaded side handles
• Removable casters
• Specially tuned front port
• 5-year transferable warranty

Step up to SWR. Order today.

The rackmountable 2U SWR WorkingPro 700 Bass Amplifier head delivers 700W into 4 ohms. For tone shaping it combines a 4-band EQ with variable mids, SWR's Aural Enhancer circuitry, and a Bass Intensifier that boosts and compresses the lows. Other pro features include preamp gain and master controls, automatic limiter with defeat switch, blend control for sidechain effects, XLR balanced pre/post output, and a footswitch for Intensifier and mute functions.

SWR WorkingPro 700 Bass Amplifier Specifications:

• 700W @ 4 ohms; 450W @ 8 ohms
• 19"W x 3-1/2"H x 13-1/2"D
• 25 lbs.

SWR WorkingPro 700 Bass Amplifier Features:

• 700W @ 4 ohms; 450W @ 8 ohms
• -10dB pad option on input
• Mute switch (footswitchable)
• Independent preamp gain and master volume controls
• Exclusive SWR Aural Enhancer tone control
• 4-band active EQ with variable midrange
• Bass Intensifier with level and frequency cutoff controls (footswitchable)
• Automatic limiter with defeat option
• XLR balanced output with pre/post switch, ground lift and -10dB switch
• Side-chain effects loop with blend control
• Tuner out jack
• Unbalanced line out jack
• Headphone jack
• Footswitch jack for included 2-button switch (switches Intensifier and mute)
• 2 - 1/4" and 2 Speakon speaker jacks
• 5-year transferable warranty

Step up to SWR. Order today.

8-ohm bass speaker cabinet handles 400W without even breathing hard. 4 cast-frame, custom-designed 10" speakers pump out chunky, tight bass tones. Chromeplated steel grille and rear-vented sturdy construction can handle whatever the road dishes out. Speakon and 1/4" jacks. 24"W x 24"H x 16"D. 70 lbs.y

Tech 21 B410 Cabinet Features:

• 8-ohm bass speaker cabinet
• Handles 400W
• 4 cast-frame, custom-designed 10" speakers
• Chromeplated steel grille
• Rear vented
• Sturdy construction
• Speakon and 1/4" jacks

Don't waste any more time. Go for the sound you've been after today!

A 2-channel bass amp head, the Tech 21 Landmark 300 is a 2-rackspace, 300W version of its predecessor, the Landmark 600. It too incorporates proprietary, 100% analog SansAmp Tube Amplifier Emulation technology. It offers a truckload of vintage and modern tube amp sounds, as well as a variety of overdriven tones. The interactive controls give you access to specific tone shaping characteristics to create your own custom sounds as well. Sample settings such as Bassman, SVT, Crimson, and King's X, are included in the owner's manual to get you started.

Tech 21 Landmark 300 300W Bass Head Specifications:

• 17"W x 16"D x 3.5"H, with an overall depth of 17-3/4".
• 21 lbs.

Tech 21 Landmark 300 300W Bass Head Features:

• 2 distinctively different channels
• Channel 1 is based on the famed SansAmp Bass Driver DI
• Channel 2 is based on the SansAmp Acoustic DI
• Channel 1 includes Drive, Presence, Level, active Bass and Treble, and blend controls
• Channel 2 includes Drive, Level, and active Bass and Treble controls, and a parametric EQ
• Parametric has sweep range of 170 Hz to 3.5 kHz, ± 16dB
• Channel switches manually or with standard latching footswitch
• Optional Tech 21 footswitch (#BFSWL) is available, which further expands the amp's capabilities
• 10dB gain boost to set up the preamp for different style pickups
• XLR Direct Output, switchable from -10dB to 0dB, enables you to go straight to mixer or recorder
• Effects loop
• Independent buffered tuner output provides a constant, unaffected signal
• 1/4" speaker outputs
• Forced-air cooled
• Included rackmount kit
  
  

Click or call now to score the best deal anywhere on the Landmark 300 - guaranteed!

The Tech 21 Sansamp RBI Rackmount Bass Tube Amp Emulator puts all of the preamp tone-shaping and fattening control of the popular SansAmp Bass Driver DI in a single rackspace and adds a host of new features: a dedicated mid control; individual level control for the XLR out to optimize your amp's output relative to the PA; effects loop; Mix 50/50 switch; 2 XLR outputs, one with level selection and a buffered unaffected XLR for running a dry signal to another channel. It also has 2 footswitch inputs: on/off and an output for chaining and toggling between 2 SansAmps.

Tech 21 SansAmp RBI Rackmount Bass Tube Amp Emulator Features:

• Puts all of its predecessor's preamp tone-shaping and fattening control in a single rackspace
• Dedicated mid control
• Individual level control for the XLR out to optimize your amp's output relative to the PA
• An effects loop
• Mix 50/50 switch
• 2 XLR outputs, one with level selection and a buffered unaffected XLR for running a dry signal to another channel
• 2 footswitch inputs: on/off and an output for chaining and toggling between 2 SansAmps

One piece of gear that can make your old amp sound like a million bucks. Buy it today.

The Trace Elliot 1048H has 4 specially voiced 10" Celestion speakers and a high-frequency attenuator horn for superb full-range reproduction. Enhanced connectivity includes 2 Neutrik Speakon and 2 - 1/4" jacks. Cab is tuned to 40Hz with central unobstructed slots for superior low-frequency response. Features metal handles, carpet covering, stainless corners, and protective steel grille. 300W handling.

Trace Elliot 1048H 4x10" 800W Bass Cabinet Features:

• 4 specially voiced 10" Celestion speakers
• Cab tuned to 40Hz with unobstructed central slots
• 2 Neutrik Speakon and 2 - 1/4" jacks
• Steel protective corners
• Shockmounted steel grille
• 300W handling

There are plenty of 4x10' cabs out there, but only the 1048H pumps out the Trace tone you want. Call or click to buy now!

The Trace Elliot 1215 is a 500W combo amp with a 15'', special design Celestion speaker and high frequency horn for outstanding full-range reproduction. The cabinet has been tuned with an unobstructed bottom slot to 42Hz for tight bass response. A 12-band EQ gives you loads of control over your sound. 6 footswitchable features include Pre Shape for the classic Trace sound, Valve to add warmth or overdrive, dual-band compressor with separate hi and lo bands, sophisticated effects loop, and an output mute.

Trace Elliot 1215 15" 500W Bass Combo Features:

• 500W
• 15", specially voiced Celestion speaker
• High-frequency horn
• MOSFET technology
• Dual-tube driver stages for signal pre-conditioning
• 12-band Trace Elliot graphic equalizer
• Dual band compressor with separate hi/lo controls
• Sophisticated effects loop (hi-pass/lo-pass/full range outputs, left/right/mono returns, series/parallel switch, loop level control)
• Electronically balanced XLR DI outputs for pre-EQ and post-preamp
• Line out
• 6 footswitchable features include pre-shape, valve, dual band compressor, sophisticated effects loop, and output mute

The 1215 is the perfect way to get that solid Trace Elliot tone and performance you want in a high-powered combo. Call or click to buy now!

Trace Elliot's 1518 bass cabinet has a specially voiced 15" Celestion speaker. Enhanced connectivity includes 2 Neutrik Speakon and 2 - 1/4" jacks. The cabinet has been tuned to 38Hz with an unobstructed bottom slot to deliver superb low-frequency reproduction. Solid construction including steel protective corners and shockmounted steel grille. 500W handling.

Trace Elliot 1518 1x15" 500W Bass Cabinet Features:

• Specially voiced 15" Celestion speaker
• Cab tuned to 38Hz with unobstructed slot
• 2 Neutrik Speakon and 2 - 1/4" jacks
• Steel protective corners
• Shockmounted steel grilles
• 500W handling

The 1518 adds that punchy bottom end that only Trace Elliot cabs have. Call or click to buy now!

The AH1000-12 delivers a massive 1000W (2x500W) of power for the demanding bassist. Each internal output stage uses MOSFET technology and incorporates a dual-tube driver stage for signal pre-conditioning. The 12-band EQ delivers more control over your sound. 6 footswitchable features include Pre Shape for the classic Trace sound, Valve to add warmth or overdrive, a dual band compressor with separate hi and lo bands, a sophisticated effects loop, and an output mute.

Trace Elliot AH1000-12 1000W Bass Amplifier Head - Scratch 'n' Dent Features:

• 1000W of power (2x500W)
• MOSFET technology
• Dual-tube driver stages for signal pre-conditioning
• 12-band Trace Elliot graphic equalizer
• Dual-band compressor with separate hi/lo controls
• Sophisticated effects loop (hi-pass/lo-pass/full range outputs, left/right/mono returns, series/parallel switch, loop level control)
• Electronically balanced XLR DI outputs for pre-EQ and post-preamp left/right
• Left/right line outputs
• 6 footswitchable features include Pre Shape, Valve, dual-band compressor, sophisticated effects loop, and output mute

If maximum power and stellar tone are what you crave, the AH1000 is your head. Call or click to buy now!

It may be a mere 10W and an 8" speaker, but this little powerhouse looms large in tone. It takes up minimal space when you're not practicing, and you can easily pack it off to lessons, dueling-bass sessions, or low-level jams. 3-band EQ and presence. Line and headphone outs.

Traynor Bass Mate 10W Combo Features:

• 10W
• 8" speaker
• 3-band EQ
• Presence
• Line out
• Headphone out
• 13"W x 15"H x 8-1/2"D
• 18 lbs.

Let him share your bedroom. Order today.

This 25W dynamo uses a specially-tuned enclosure and a punchy 10" speaker to deliver unbelievable sound. Active bass, mid, and treble tone controls, plus presence and bass boost. Line out and headphone jack. Its compact size and rugged construction make it more than just a low-level practice amp. It's also a great gigging amp for upright players or any bassist who doesn't have to get too loud.

Traynor Bass Mate 25W Combo Features:

• Specially tuned cab
• 25W power
• 10" speaker
• 3-band EQ
• Presence and bass boost
• Line out
• Headphone jack
• 16-1/2"W x 16-1/2"H x 8"D
• 24 lbs.

It's the biggest little bass amp in all the world. Order today.