The Traynor DynaBass 800H is set apart from other bass amp heads by its versatile hybrid tube and solid state preamp. The all-tube input signal path gives you as much grunge or as little tube warmth as you want. Meanwhile, the FET-driven solid state input circuit ensures highly responsive and clean tone. The DynaBass amp head's innovative blend control ensures the right mix of raw power and definition.

Built for the most demanding stages, the DynaBass 800H is one of the highest-powered bass amps Traynor's ever offered. The highly efficient solid state amplifier section reliably delivers 800W to a 4-ohm load for maximum compatibility with a typical live rig.

A dual fan cooling system integrated into the DynaBass 800H completely negates the need for heavier heatsinks. Well placed intake/exhaust vents allow the two cooling fans to immediately draw all extraneous heat away from the amplifier to make sure the amplifier won't overheat even under the most extreme live conditions.

Innovative tone-shaping controls like Scoop and Bass Resonance are standard on the DynaBass 800H as well as a compressor with user-definable threshold and a customizable output limiter. The variable contour Scoop function sweeps from a flat frequency response through a mid-frequency dip at 400Hz. As you increase beyond the halfway point on the control, you begin to boost both the top and bottom end to your tone, in addition to further reducing the midrange level. The Bass Resonance control actually controls the damping factor of the amplifier's output stage, and lets you take full advantage of the tone of a loudspeaker enclosure. When used with a high quality and responsive loudspeaker like the Traynor TC810, Bass Resonance allows you to dial in the exact response from your rig that you want to hear - anything from a tight and punchy modern tone to a looser, more vintage bass sound. The five-band EQ with semi-parametric mid also aids in finding the tones you need.

Other professional features added to the DynaBass 800H include highly visible VU metering of the output signal, a front panel wet/dry control for the footswitchable tube drive, footswitchable effects return with front panel wet/dry blend control, and a pre/post selectable XLR balanced DI output with ground lift. High power handling Speakon extension speaker cabinet outputs have been added in addition to the 1/4-inch phono jacks commonly used on instrument amplifiers.

Traynor DynaBass 800H Bass Amp Head Specifications:

• Power at min. impedance (Watts): 600 at 8ohms/800 at 4ohms/600 at 2ohms
• Minimum impedance (ohms): 2
• Burst power - 2 cycle: 1000
• Channel 1 - inputs: 2x1/4
• Channel 1 - controls: 5-band EQ w/ parametric sweepable mid, Tube Gain
• Channel 1 - switches: Limiter, Compressor, Tube Drive, Tuner Mute
• Input sensitivity (mV): 80
• Master outputs: Speakon, 1/4" (x2)
• Line out: (type/configuration): XLR (Pre/Post switchable)
• Line out sensitivity (Vrms): 1.0
• Effects Footswitch/Function: Tube Drive/Effects Loop
• Effects Return sensitivity (Vrms): 1.0
• LED Indicators: Power, Tube Drive, Compressor, Mute, EFX Rtn
• Protection: Thermal, Short Circuit
• Limiter/Switchable: Yes/Yes (Output Clip Limiter)
• Dimensions: 21"W x 8.5"H x 16"D
• Weight: 47 lbs.

Traynor DynaBass 800H Bass Amp Head Features:

• 800-watts at 4 ohms
• Hybrid tube/solid state preamp design (switchable)
• 5-band EQ w/sweep mid w/additional Scoop & Bass Resonance controls
• Footswitchable Tube Overdrive w/Clean Blend
• Onboard Compression and Limiting
• Tuner mute
• Active and passive instrument level inputs
• Integrated metal flip handles
• XLR balanced Pre/Post D.I output
• Integrated solid plywood sleeve w/additional single 19-inch accessory rack space
• Amp In (rear)
• Parametric mid
• Wet/Dry Blend on EFX Return
• Wet/Dry control on Drive mode
• Tuner mute switch and 1/4" tuner out jack
• Bass resonance
• Master volume control
• Effects Loop (Rear)
• 12 LED output power display with Clip indicator
• Dual fan cooling system

Mix your sound through the blender of a tube and solid state hybrid for a special tone. Order today!

The Traynor TC115 is a bass speaker cabinet that works as a stand-alone box for rock, blues, and country players, or as a solid foundation under any 2x10 or 4x10 cabinet for bigger rigs. The TC115 bass cab's 15" speaker provides 400W of power handling with a frequency response of 45Hz to 5kHz.

The reason you'll experience the kind of tone the TC115 produces comes from Traynor's dedication to quality construction. With forty-plus years of experience designing and building instrument and loudspeaker cabinets, they've learned that MDF (medium density fiberboard) or particleboard construction isn't conducive to a long rattle-free life or a great bass tone, especially when played night after night at the volumes these cabinets are expected to produce. With that in mind, all Traynor bass cabinets are built using only a solid birch plywood cabinet construction to ensure maximum tone and long-term reliability. The TC115 also has both Speakon and 1/4" inputs, an all-metal speaker grill, removable casters, all-metal flip handles, and a heavy duty Nubtex covering to protect the internal components.

Traynor TC115 400W Bass Extension Cabinet Specifications:

• Cabinet program power handling: 400W
• Cabinet impedance: 8 ohms
• Speaker configuration - LF (Size / Power): 1x15
• Frequency response (Hz +/-3dB): 45 - 5k
• Inputs: 2 x Speakon, 2 x 1/4-inch
• Dimensions: 24"W x 18.25"H x 18.5"D
• Weight: 60 lbs.

Traynor TC115 400W Bass Extension Cabinet Features:

• 1 x 15" speaker
• 2 Speakon inputs
• 2 - 1/4" inputs
• Solid birch plywood cab construction
• Heavy duty Nubtex covering
• Metal corners
• Detachable casters
• Metal flip handles
• 16-gauge punched metal grill
• 2-year manufacturer's unlimited warranty

Order the TC115 and be ready for the big gigs.

This North American built all-tube 200W bass amp head stays true to its vintage roots. The YBA200 is a fan-cooled 200W all-tube bass head powered by four Sovtek 6550WE power tubes amplifying the 2 Sovtek 12AX7A and one 12AU7 that make up the preamp section. In true Traynor tradition, there are no semiconductors in the signal path, glass epoxy circuit boards, solid plywood box construction, solid component selection and an all-metal chassis ensure years of unmatched reliability. Traynor covers the YBA200 with a 2-year unlimited warranty.

Basic controls you'd expect to see appear on the front panel of any high-end bass amp include input gain, master volume control and a 3-band master EQ section. You'll also see innovative new tone shaping features like Scoop, Range', and Resonance'.

The Scoop knob sweeps from a flat frequency response to a mid-frequency dip at 400 Hz and can be completely bypassed from a separate front panel on/off switch. The Range control shifts the overall tone shape and general tonal characteristics of the master EQ section of the amp.

The unique Resonance Control, when used with a high quality and responsive loudspeaker enclosure, like the Traynor YBX1510, allows the player to dial in the exact bass response desired. It's easy to get any sound from a tight and punchy tone to a looser, more vintage-tube' sound with the Traynor YBA200. The Resonance control actually controls the damping factor of the amplifier's output stage, and allows the player to take full advantage of the tone of the loudspeaker enclosure.

The use of toroidal transformers reduces the weight of the YBA200 to less than 41 pounds, much lighter than many other all-tube high-power bass amps in this class.

The YBA200 has high and low level 1/4-inch inputs, a 1" tuner output with a switchable mute function that mutes the entire rig and kills the DI output when tuning. The front panel mounted XLR D.I. output has a one-touch ground lift, a 20dB pad and is switchable pre or post EQ.

The Traynor Bass amps take their place among the vintage Traynor, with the familiar black vinyl covering and black metal corners, all plywood construction, and a classic front-mounted Traynor logo, just like on their guitar counterparts, the Traynor Custom Valve Series. And of course they come with Yorkville's famous 2-year (even if you break it!)* transferable warranty

* Warranty valid in Canada and USA only

As the desire for real tube tone continues to grow among bassists, Yorkville responds to the demand by re-introducing Canadian-made Traynor Tube Amplifiers!

Made famous in the 60's and 70's, Traynor Tube Amps were a hit among both professional and hobby bass players, and were known for their affordability and great tone. And, they were tough as nails!!

To relaunch the popular Traynor bass amplifier line is a fan-cooled 200-watt all-tube bass head, the YBA200. Powered by four Sovtek 6550WE power tubes amplifying the two Sovtek 12AX7A and one 12AU7 that make up the preamp section. In true Traynor tradition, there are no semiconductors in the signal path.

In addition to the famous Traynor Scoop' control, two unique tone-shaping controls appear on the YBA200, making it one of the most versatile bass amplifiers in its class.

The Range control shifts the overall tone shape and general tonal characteristics of the master EQ section of the amp. The completely new Resonance Control, when used with a high quality and responsive loudspeaker enclosure like the Traynor YBX1510, allows the player to dial in the exact bass response from their rig that they want to hear from their amplifier. It's easy to get any sound from a tight and punchy tone to a looser, more vintage-tube' sound with the Traynor YBA200. The Resonance control actually controls the damping factor of the amplifier's output stage, and allows the player to take full advantage of the tone of his loudspeaker enclosure.

The YBA200 has high and low level 1/4" inputs, a 1/4" tuner output with a switchable mute function that mutes the entire rig and kills the DI output when tuning. The front panel mounted XLR D.I. output has a one-touch ground lift, a 20dB pad and is switchable pre or post EQ.

To compliment the retro look and sound is the 400-watt Traynor YBX1510 bass enclosure, the perfect mate to the YBA200 bass head. The YBX1510 is loaded with a compression driver, a single 15-inch and two 10-inch speakers, custom designed by Eminence specifically for this cabinet. - Designed and tuned as a complete unit, the YBX1510 delivers more tone than any separate two-ten cabinet stacked with a single 15-inch box can provide. The YBX1510 has two separate ported chambers in its enclosure; each tuned to compliment each other while taking specific advantage of their individual component's strengths.

The YBX1510's two-ten section with the compression driver delivers clarity, definition and the majority of the bottom end, while the single 15-inch driver provides punch and low-mid presence. The compression driver has an L-pad volume control so as much or as little of the high frequency driver can be dialed in as required.

The Traynor Bass amps take their place among the vintage Traynor with the familiar black vinyl covering and black metal corners, all plywood construction, and a classic front-mounted Traynor logo, just like on their guitar counterparts, the Traynor Custom Valve Series. And of course they come with Yorkville's famous two-year (even if you break it!)* transferable warranty.

* Warranty valid in Canada and USA only

Traynor YBA200 200W Bass Head Specifications:

• Specifications
• Type: All Tube Bass Head
• Power @ min. impedance (Watts): 200 @ 4/8 ohms switchable
• Minimum Impedance (Ohms): 2
• Burst Power - 2 cycle: 250 Watts
• Frequency Response (Hz +/-3dB): 30 - 16,000
• Hum and Noise (dB): -90db
• Input Channels: 1
• Channel 1 - inputs: 2 x 1/4inch
• Channel 1 - controls: Gain
• Master Volume Control: Yes
• Main Tone Controls: Treble, Mid, Range, Bass, Scoop, Resonance
• Input Sensitivity (mV): 20
• Master Outputs: Pre-amp out (Pre Master)
• Line Out (type / configuration): XLR Balanced (Pre/Post, Grnd Lift)
• Line Out Sensitivity (Vrms): 1V (100mV when -20db Pad engaged)
• Effects Loop / Location: Pre-amp out, Power Amp in, Loop Thru
• Effects Return Sensitivity (Vrms): 1V
• LED Indicators: Tuner Mute, Power/Standby
• External speaker output / location: 2 x 1/4inch (Rear)
• Other Features: Impedance Selector (4/8 ohms)
• Tubes: 2x12AX7, 1x12AU7, 4x6550
• Tuner output 1/4inch
• Dimensions (DWH, inches): 11.5 x 22.5 x 9.5
• Dimensions (DWH, cm): 29 x 57 x 24
• Weight (lbs / kg): 44 / 20
• Bass Amps Series Overview

Traynor YBA200 200W Bass Head Features:

• Features
  
  View High Resolution Image of the YBA200
• 200 watts of all tube power, no semi conductors in the signal path
• Four Sovtek 6550WE power tubes, Two 12AX7A and One 12AU7 preamp tubes
• Three band master EQ with unique Range control
• Innovative new tone shaping features like Scoop and Resonance
• Toroidal transformers reduces the weight to less than 41 pounds
• 1/4" tuner output with mute switch
• Pre/Post switchable XLR DI out with ground lift and 20db pad
• Two year unlimited warranty

American-built, amazing price, awesome features, what are you waiting for?

Representing an incredible combination of design, manufacturing and creativity, the Warwick 115 Pro cabinet is loaded with a 15" speaker that offers outstanding performance at a much lighter weight than other 1x15 bass cabs. The 115 Pro is equipped with professional high current speaker connections compatible with Switchcraft HPC and similar connectors. A tough blue-black felt covering plusd chrome-plated ports and high-frequency horns give it an understated yet powerful stage appearance.

Warwick 115 Pro 400W Speaker Cabinet Specifications:

• Weight: 64 lbs.
• Dimensions: 26.5" x 24" x 19" (HxWxD)

Warwick 115 Pro 400W Speaker Cabinet Features:

• 15" Speaker
• 400 watts RMS handling
• Impedance: 8 ohms
• Bass Reflex Housing

Want to make sure your bass is felt and not just heard? Get yourself a 115 Pro.

The 211 Pro is a 2x10 bass cab that represents an incredible combination of design, manufacturing, and creativity. Wawick loaded it with speakers that offer outstanding performance at a much lighter weight. It is equipped with professional high-current speaker connections compatible with Switchcraft HPC and similar connectors. A tough blue-black felt covering and the ports and high-frequency horns are chrome-plated for an understated but powerful stage appearance.

Warwick 211 Pro 400W Speaker Cabinet Specifications:

• Weight: 55 lbs.
• Dimensions: 17.8" x 23.8" x 16.8" (HxWxD)

Warwick 211 Pro 400W Speaker Cabinet Features:

• 1 HF horn with attenuator
• 400 watts RMS
• Impedance: 8 ohms
• Bass Reflex Housing

Great on its own or bi-amped with another cabinet. Order yours now!

Representing an incredible combination of design, manufacturing and creativity, the Warwick 411 Pro cabinet is loaded with speakers that offer outstanding performance at a much lighter weight. The speaker cab is equipped with professional high current speaker connectors compatible with Switchcraft HPC and similar connectors. A tough blue-black felt covering and the ports and high-frequency horns that are chrome-plated give it an understated but powerful stage appearance.

Warwick 411 Pro 600W Speaker Cabinet Specifications:

• Weight: 85.98 lbs.
• Dimensions: 26.5" x 23.8" x 19" (HxWxD)

Warwick 411 Pro 600W Speaker Cabinet Features:

• 4x10 Speakers
• HF Horn with attenuator
• 600 watts RMS
• Impedance: 8 ohms
• Bass Reflex Housing

Big-time wattage handling and quality construction for professional tone. Order today!

The 611 Pro gives you the outstanding design quality and sound you'd expect from Warwick in a unique format designed for professionals. It comes loaded with speakers that offer outstanding performance at a much lighter weight. The speaker cab is equipped with professional high current speaker connections compatible with Switchcraft HPC and similar connectors. A tough blue-black felt covering and ports and high-frequency horns that are chrome-plated give it an understated but powerful stage appearance.

Warwick 611 Pro 900W Speaker Cabinet Specifications:

• Weight: 121.25 lbs.
• Dimensions: 39" x 23.8" x 19" (HxWxD)

Warwick 611 Pro 900W Speaker Cabinet Features:

• 6x10" Speakers
• 1 HF horn with attenuator
• 900 watts RMS
• Impedance: 4 ohms
• Bass Reflex Housing

Big-time wattage handling and quality construction for professional tone. Order today!

The Warwick Blue Cab 15 is perfect for the classroom, bedroom, or even for backstage practice time. It's simplified controls make it easy to use while still giving you professional-quality tone and performance. A super-efficient 8-inch speaker coupled with a ported cabinet and a tilt-back feature allows you to maximize the 15 watts of power and project the tone where you need it the most. Even though it is small in size, the Blue Cab 15 bass amplifier comes with an FX loop on the back panel—a feature normally not seen in small practice amps. Best of all, the Blue Cab offers you all of these great features at an incredibly affordable price.

Warwick Blue Cab 15 15W Bass Combo Specifications:

• Dimensions:
• W 11.81 inches
• H 16.14
• D 9.84
  
  Weight:
• 24.25 lbs.

Warwick Blue Cab 15 15W Bass Combo Features:

• 15 watts
• 8-inch Speaker
• Controls for bass, middle, treble and volume
• FX Loop
• Bass Reflex Housing
• Headphone
• Output
• Collapsible rear foot for tilt-back operation

Affordable, easy to use, and full of big bass sounds. Order now!

The Blue Cab 30 bass combo is compact for sure, but Warwick didn't skimp on the tone. This cool bass amp is small enough to easily move around, yet big enough to handle small acoustic gigs and rehearsals. The 10-inch speaker is impressively deep sounding, and the ported cabinet and tilt-back design work perfectly together to create a dynamic bass combo for the serious musician. There is also a built-in FX loop and a line out, which is perfect for the bassist looking for more from his or her small bass combo.

Warwick Blue Cab 30 30W Bass Combo Specifications:

• Dimensions:
• W 13.39 inches
• H 16.54 inches
• D 12.6 inches
  
  Weight:
• 33.07 lbs.

Warwick Blue Cab 30 30W Bass Combo Features:

• 30 Watts
• 10-inch Speaker
• Separate inputs for active and passive basses
• Controls for bass, middle, treble and volume
• Line Out
• Head Phone Output
• FX Loop
• Bass Reflex Housing
• Collapsible rear foot for tilt-back operation

Affordable, easy to use, and full of big bass sounds. Order now!

The Blue Cab 60 is a serious bass combo that comes loaded with great features for the practicing and performing bassist. This is a bass amplifier compact enough to easily move around and yet powerful enough for small gigs. The Blue Cab 60 also features two RCA auxiliary inputs that are located on the front panel for you to plug in your MP3 player, CD player, or drum machine. There is also an auxiliary input that makes it very easy to balance levels. A powerful 12" speaker loaded in a ported cabinet with tilt-back for extended projection performs perfectly to voice your groove.

Warwick Blue Cab 60 60W 1x12 Bass Combo Amp Specifications:

• Dimensions:
• W 15.75 inches
• H 20.87 inches
• D 13 inches
  
  Weight:
• 41.89 lbs.

Warwick Blue Cab 60 60W 1x12 Bass Combo Amp Features:

• 60 watts power
• Fan-cooled
• 12" Speaker
• Separate inputs for active and passive basses
• Controls for bass, middle, treble and volume
• 2 RCA Aux Inputs with level control
• Line Out
• Headphone Jack
• FX Loop
• Bass Reflex Housing
• Collapsible rear foot for tilt-back operation

Click or call to order today! Our dual 45-day Complete Satisfaction and Lowest Price Guarantees mean you can't lose!

The Warwick Pro Fet 3.2 bass head was created with bassists' deepest desires in mind. Bass players from all over the world told Warwick they wanted a bass amp that would deliver clean power, user-friendly operation, tour-tested durability, and—of course—awesome tone. The Pro Fet 3.2 delivers this and more, with 300W of pristine power and a preamp section that is both easy to operate and powerful in performance. The parametric EQ is divided into four tone controls (bass, low mid, high mid, and treble) and includes two switches, one for Deep and one for Bright. With these simple controls you can shape your tone in an infinite number of ways. Best of all, you do not have to have a degree in electrical engineering to use it!

Warwick Pro Fet 3.2 300W Bass Amp Head Specifications:

• Dimensions:
• W 19 inches
• H 2 Rack Spaces
• D 11.81 inches
  
  Weight:
• 22 lbs.

Warwick Pro Fet 3.2 300W Bass Amp Head Features:

• 300 Watts
• 4 ohms
• Gain control with LED Clip Indicator
• Adjustable Compressor
• Variable Contour
• Controls for bass, low mid, high mid and treble
• FX Loop
• Switches for deep, bright and mute
• DI Out with pre/post and ground lift switches
• Line Out
• Tuner Out
• Headphone Out

The Pro Fet 3.2 bass amp head was designed to be the strongest, best-sounding link in your signal chain. Order today with the assurance of our double guarantees of the lowest possible price and total satisfaction.

The Warwick Pro Fet 3.2 bass head was created with bassists' deepest desires in mind. Bass players from all over the world told Warwick they wanted a bass amp that would deliver clean power, user-friendly operation, tour-tested durability, and—of course—awesome tone. The Pro Fet 3.2 delivers this and more, with 300W of pristine power and a preamp section that is both easy to operate and powerful in performance. The parametric EQ is divided into four tone controls (bass, low mid, high mid, and treble) and includes two switches, one for Deep and one for Bright. With these simple controls you can shape your tone in an infinite number of ways. Best of all, you do not have to have a degree in electrical engineering to use it!

Warwick Pro Fet 3.2 300W Bass Amp Head - Scratch 'n' Dent Specifications:

• Dimensions:
• W 19 inches
• H 2 Rack Spaces
• D 11.81 inches
  
  Weight:
• 22 lbs.

Warwick Pro Fet 3.2 300W Bass Amp Head - Scratch 'n' Dent Features:

• 300 Watts
• 4 ohms
• Gain control with LED Clip Indicator
• Adjustable Compressor
• Variable Contour
• Controls for bass, low mid, high mid and treble
• FX Loop
• Switches for deep, bright and mute
• DI Out with pre/post and ground lift switches
• Line Out
• Tuner Out
• Headphone Out

The Pro Fet 3.2 bass amp head was designed to be the strongest, best-sounding link in your signal chain. Order today with the assurance of our double guarantees of the lowest possible price and total satisfaction.

The Pro Fet 5.1 Bass Amp Head is the bigger, more powerful brother of the Pro Fet 3.2. It puts out 500W of clear, clean, solid-state power for mix-cutting volume and tons of headroom. The preamp section is easy to use and extremely flexible. The Pro Fet 5.1 amplifier head gives you more features than most amps by including an adjustable compressor and a variable contour control to help you dial in your tone.

Warwick Pro Fet 5.1 500W Bass Amp Head Specifications:

• Dimensions:
• W 19 inches
• H 2 Rack Spaces
• D 11.81 inches
  
  Weight:
• 26.46 lbs.

Warwick Pro Fet 5.1 500W Bass Amp Head Features:

• 500W
• 4 ohms
• Gain control with LED Clip Indicator
• Adjustable Compressor
• Variable Contour
• Controls for bass, low mid, high mid and treble
• FX Loop
• Switches for deep, bright and mute
• DI Out with pre/post and ground lift switches
• Line Out
• Tuner Out
• Headphone Out

With a ProFet 5.1 and a few Warwick cabs you will be unstoppable! Order today!

Warwick through everything they had at the Sweet 25.1 and, in the process, made a bass amplifier that's very special. It's loaded with a 250-watt amp to drive a 15-inch speaker, an 8-inch speaker, and a high-frequency horn all loaded in a bass reflex cabinet for full-spectrum bass sound. You want control over your tone? The Sweet 25.1 gives you a 4-band parametric EQ; deep and bright switches; a compressor with variable compression rate; and an adjustable contour control! The Sweet 25.1 is the perfect blend of power, precision, and performance.

Warwick Sweet 25.1 250W Bass Combo Specifications:

• Dimensions:
• W 17.72 inches
• H 28.35 inches
• D 13.78 inches
  
  Weight:
• 63.93 lbs.

Warwick Sweet 25.1 250W Bass Combo Features:

• 250 Watts
• 15-inch Speaker
• 8-inch Speaker
• HF Horn
• Gain control with LED Clip Indicator
• Adjustable Compressor
• Variable Contour
• Controls for bass, low mid, high mid and treble
• FX Loop
• Switches for deep, bright and mute
• DI Out with pre/post and ground lift switches
• Line Out
• Tuner Out
• Headphone Out
• Bass Reflex Housing
• Collapsible rear foot for tilt-back operation

Buy the Sweet 25.1 today. Your band, your bass tone, and your audience will thank you for it!

The Warwick Take 12 Bass Combo Amp is a powerhouse that delivers a full range of tones in a setup that's incredibly easy to dial in. The EQ section gives you control over Lows, Mid Low, Mid High and Treble frequencies, making it better able to contour the ever important midrange of your bass sound. The 12" speaker and switchable high-frequency horn work perfectly together to give you fat lows and crystal clear highs. All of these features and more come packed into a very portable and road-ready solid-state bass combo amplifier.

Warwick Take 12 80W 1x12 Bass Combo Amp Specifications:

• Dimensions:
• W 15.35 inches
• H 21.65 inches
• D 13.39 inches
  
  Weight:
• 35.27 lbs.

Warwick Take 12 80W 1x12 Bass Combo Amp Features:

• 80 Watts power
• 12" speaker
• Switchable (on/off) high-frequency horn
• Controls for gain, bass, mid low, mid high, treble and master volume
• Clip LED to help set optimum input level
• Mute Switch
• Line Out
• Headphone Out
• FX Loop
• Bass Reflex Housing
• Collapsible rear foot for tilt-back operation

Shouldn't your small amp perform like your full stack? The Take 12 bass combo does. Get yours now!

The Warwick X-treme 10.1 bass amp head is both beauty and beast, all in one rack unit! The beauty is found in the incredible voicing and EQ section, which gives you the ability to shape your sound in a myriad of ways. The beast is found in the beefy 1000 watts (at 4 ohms) of MOSFET power, which is clean, clear and devastating. There are several other features on this bass amplifier head—like the switchable and adjustable onboard compressor—which pro players will rejoice over and find that they cannot live without.

Warwick X-treme 10.1 1000W Bass Amp Head Specifications:

• Dimensions:
• W 19 inches
• H 2 Rack Spaces
• D 1 4.57 inches
  
  Weight:
• 35.27 lbs.

Warwick X-treme 10.1 1000W Bass Amp Head Features:

• 1,000 Watts
• 4 ohms
• Gain control with LED Clip Indicator
• Voicing Section with controls for Bottom, Contour, Growl and Attack
• 3-band EQ with parametric mids
• Adjustable Compressor
• 2-Way Boost Switch
• Parallel FX Loop
• DI Out with pre/post and ground lift switches
• Line Out
• Tuner Out
• Footswitch Connector for Boost and EQ

Make the guitarist whine about not being heard with the X-treme 10.1!

If the X-Treme 10.1 is too much power for your musical lifestyle, the X-Treme 5.1 is just the thing for you. With many of the same killer features as its big brother, the 500-watt power amp is still big enough to make your guitarist whine about not being heard. The X-Treme 5.1 has an incredible voicing and EQ section, which gives players the ability to shape their sound in a myriad of ways. The MOSFET power amp is clean, clear, and devastating. Switchable and adjustable onboard compression is the icing on this thick slab of cake.

Warwick X-treme 5.1 500W Bass Amp Head Specifications:

• Dimensions:
• W 19 inches
• H 2 Rack Spaces
• D 1 4.57 inches
  
  Weight:
• 35.27 lbs.

Warwick X-treme 5.1 500W Bass Amp Head Features:

• 500 Watts
• 4 ohms
• Gain control with LED Clip Indicator
• Voicing Section with controls for Bottom, Contour, Growl and Attack
• 3-band EQ with parametric mids
• Adjustable Compressor
• 2-Way Boost Switch
• Parallel FX Loop
• DI Out with pre/post and ground lift switches
• Line Out
• Tuner Out
• Footswitch Connector for Boost and EQ

Make the guitarist whine about not being heard with the X-treme 5.1!

Waves GTR Solo amp and effects modeling software is powerful and affordable. GTR Solo delivers the sound of real amps, cabs, stompboxes, and microphones right into your computer. Just plug in, fire it up, and experience precision models of 10 different amplifiers by Fender, Marshall, Vox, and others. Then take it to the next level with GTR Solo's collection of 13 awesome distortion, modulation, and ambient effects. These are the same GTR sounds top guitarists, producers, and engineers are using on their most important tracks. GTR Solo software can be used as a standalone or with a DAW with no iLok needed. Just grab your guitar and you're ready to rock.

Waves GTR Solo Amps and Effects Software Specifications:

• System requirements
• PC: Intel Pentium 4 2.8GHz/AMD Athlon XP 3400, 1GB RAM on XP/2GB RAM on Vista, WinXP 32-bit SP2/Vista Business 32-bit/Vista Ultimate 32-bit, 1024 x 768 screen resolution
• Mac: G5 Dual 2GHz, 1 GB RAM, OS-X 10.4.11 & 10.5.2, 1024 x 768 screen resolution
• Intel-based Mac: Core Duo 1.83GHz, 1 GB, OS-X 10.4.11 & 10.5.2, 1024 x 768 screen resolution
  
  Mac supported hosts/formats
• Pro Tools TDM 7.3.1cs3 (RTAS only)
• Pro Tools LE 7.3.1cs3 (RTAS)
• Pro Tools M-Powered 7.3.1cs3 (RTAS)
• Cubase SX 4.1.3 (VST)
• Nuendo 4.1.3 (VST)
• Logic 8 (Audio Units)
• Garage Band 4.1.2 (Audio Units)
  
  PC supported hosts/formats
• Pro Tools TDM 7.3.1cs3 - 7.4 (RTAS only)
• Pro Tools LE 7.3.1cs3 - 7.4 (RTAS)
• Pro Tools M-Powered 7.3.1cs3 - 7.4 (RTAS)
• Cubase SX 4.1.3 (VST)
• Nuendo 4.1.3 (VST)
• SoundForge 9.0e (VST)
• Vegas 8 (VST)
• Adobe Audition 3.0 (VST)
• Sonar 7 VST, (WinXP only)
• Samplitude 10 (VST, WinXP only)
• Ableton Live 7 (VST, WinXP only)

Waves GTR Solo Amps and Effects Software Features:

• 10 Amps:
• Clean: Based on a 1959 tweed Fender Bassman
• Sweet: Based on a 1968 Gibson Skylark
• Crunch: Based on a custom Garcia from Paul Reed Smith's personal collection
• Shredder: Based on a Marshall JMP1 preamp
• PRS Scorch: Based on a boutique amplifier from Paul Reed Smith's personal collection
• PRS Crush: Based on a modified 50W Marshall MK2
• Edgy: Based on a 1980 Vox AC-30 TB-2
• Drive: Based on a 1964 blackface Fender Super Reverb
• Overdrive: Based on a 1980 Marshall JMP
• SolidState: Based on a Hartke 3500
  
  10 Cabs:
• 12" OpenBack
• 2x12" Closed Back
• 2x12" Open Back
• 4x10" Open Back
• 4x12" Standard
• 4x12" Vintage
• Acme 12" Custom
• Bass 8x10" Pro
• Acme 4x12" Vintage Gibson Skylark
• Acme 8" OpenBack Hiwatt
  
  13 Stomps:
• OverDrive
• Distortion
• Phaser
• Flanger
• Chorus
• Delay
• WahWah
• Spring
• Pitcher
• Vibrolo
• GateComp
• EQ
• Volume
  
  Includes Waves Precision Tuner
• Supports up to 96kHz

As a standalone or a cog in your DAW, this plug-in is for guitarists looking to explore their sound. Order today!

100W of power through a specially tuned enclosure yields amazing sound. The scoop control boosts bass, adds presence to the highs, and notches the mids. Its knob lets you set the degree of depth. Selectable pre/post XLR out and effects loop. 3-band EQ. Headphone jack. Carpet finish.

Yorkville BassMaster XM100C Combo Specifications:

• Type: Bass Combo Amplifier
• Power @ min. impedance (Watts): 100
• Minimum Impedance (Ohms): 4
• Burst Power - 2 cycle: 125
• Speaker Configuration - LF (Size / Power): 1 x 15 inch / 100 Watts
• Input Channels: 1
• Channel 1 — inputs: 1/4 inch Phono
• Channel 1 — controls: Volume, Bass Mid, Treble, Contour
• Line Out (type / configuration): XLR Switchable pre or post
• Line Out Sensitivity (Vrms): 25
• LED Indicators: Power
• Protection: Thermal, Short Circuit
• Headphone Jack: Yes
• Ultra-Thane painted finish
• 17"W x 20"H x 13"D
• 51 lbs.

Great sound for a low price and all the essential features. Order your Yorkville today.