A very affordable and great-sounding first Ampeg.

The Ampeg BA115 Bass Amp Series Combo, a member of Ampeg's starter series, has simple, clean looks and easy controls. The BA115 delivers 100W of power to a single 15" speaker. It provides simple 3-band tone controls, plus a "style selector" with 5 basic tone options. Other features include master and gain controls, a balanced line out (XLR), headphone jacks, and RCA inputs for connecting a CD or tape player. As a handy stage feature, the cabinet tilts back.

Ampeg BA115 Bass Combo Features:

• 100 watts of power
• 15" speaker
• Style selector with 5 basic tone options
• 3-band tone controls
• Master and gain controls
• Balanced XLR line out
• Headphone jack
• RCA inputs for connecting a tape or CD player
• Tilt-back cabinet

One difference between the great and near-great is their amplifier. Order today.

A very affordable and great-sounding first Ampeg.

The Ampeg BA115 Bass Amp Series Combo, a member of Ampeg's starter series, has simple, clean looks and easy controls. The BA115 delivers 100W of power to a single 15" speaker. It provides simple 3-band tone controls, plus a "style selector" with 5 basic tone options. Other features include master and gain controls, a balanced line out (XLR), headphone jacks, and RCA inputs for connecting a CD or tape player. As a handy stage feature, the cabinet tilts back.

Ampeg BA115 Bass Combo - Scratch 'n' Dent Features:

• 100 watts of power
• 15" speaker
• Style selector with 5 basic tone options
• 3-band tone controls
• Master and gain controls
• Balanced XLR line out
• Headphone jack
• RCA inputs for connecting a tape or CD player
• Tilt-back cabinet

One difference between the great and near-great is their amplifier. Order today.

The BA115HP is stripped down and ready to rock.

Simple and to the point, the BA115HP has a 220W power section, custom 15" woofer, and 1" compression tweeter with a variable pad to adjust the crossover level. The straightforward-yet-effective EQ controls deliver lots of tonal flexibility, especially in conjunction with the Style response control. An XLR direct out allows patching to a mixing board or recording console while the built-in digital chromatic tuner and mute switch make it easy to tune silently.

Ampeg BA115HP 220 Watt 1x15 Bass Series Combo Amp Features:

• 220W power output
• Custom 15" Ampeg driver
• 1" compression driver
• 3-band EQ
• 5-position Style mid control
• Built-in tuner
• Input gain and master
• CD input
• Mute switch
• 21"W x 21"H x 15-1/2"D
• 80 lbs.

The BA115HP deliverse the solid Ampeg sound in a compact, practice-friendly package. Order yours today!

Tube-driven preamp for additional warmth and coloration.

The BA115HPT has all the professional features of other Ampeg Bass Amp Series combos, with the addition of a 12AU7 tube integrated into the preamp circuit. Line out, 3-band EQ, Style control, and padded input option in a robust, tilt-back enclosure.

The BA115HPT features 220 watts of power, a 15" driver, and a 1" compression driver. In addition, the BA115HPT has dedicated input and master gain controls as well as CD input and mute switch.

Ampeg BA115HPT 1X15 220 Watt Bass Combo Amp Features:

• 220W
• 12AU7 preamp tube
• 15" heavy-duty driver
• 1" horn driver with L-pad attenuator
• XLR output

Ideal for stage, studio, or even the bedroom. Order today!

Tube-driven preamp for additional warmth and coloration.

The BA115T has all the professional features of other Ampeg Bass Amp Series combos, with the addition of a 12AU7 tube integrated into the preamp circuit. Line out, 3-band EQ, Style control, and padded input option in a robust, tilt-back enclosure.

The BA115T features 100 watts of power, a 15" driver, and a piezo high-frequency component for additional punch and tonal clarity and at the upper end.

Ampeg BA115T 1X15 100 Watt Bass Combo Amp Features:

• 100W
• 12AU7 preamp tube
• 15" heavy-duty driver
• Piezo tweeter
• XLR output

Ideal for stage, studio, or even the bedroom. Order today!

Portable, powerful, and toneful.

At just 50 pounds, you'll wonder how Ampeg crammed so many features into it's BA300/210 bass combo. Although it packs dual 10" LF drivers, a HF horn (with Level control), and 300 Watts of pure Ampeg output into its small frame, this combo is ultra-transportable. It even includes a set of removable casters, so you're ready to roll whenever you've got a gig or need to take it to the garage for practice. The bass amp gives you all the Ampeg tone-shaping you've grown accustomed to thanks to its 12AX7 tube preamp, Style control, 3-Band EQ, and Ultra-High/Low switches.

In order to keep the weight factor low without sacrificing power output, Ampeg integrated a Class-D switching power supply. They also gave it a variable compressor and a selectable pre/post XLR tube DI with Level control. All together, it makes Ampeg BA300/210 amplifier ideal for the semi-pro to professional player seeking superb tone-sculpting options, extreme portability, and SVT-level output.

Ampeg BA300 / 210 2 x 10 Bass Combo Amp Specifications:

• Dimensions: (WxHxD): 21.25" x 21.5" x 16"
• Weight: 55lbs.
  
  RMS power output: 300W Class-D

Ampeg BA300 / 210 2 x 10 Bass Combo Amp Features:

• LF driver: 2 x 10" speakers
• HF driver: 1 x HF horn w/Level control
• Preamp: tube (1 x 12AX7)
• Power amp: solid state, Class D
• Tone controls: 3-Band EQ
• Mid tone control: style
• Ultra High/Ultra Low switches
• Variable compressor
• Tube-driven balanced XLR and unbalanced 1/4" TS line out w/ Level control, Pre/Post-EQ switch and ground lift
• Effects loop
• Removable casters

If you want it loud and proud, this cab combo is your answer. Portable and powerful, make a smart decision and order yours today.

SVT-level output and easy portability.

With removable casters and weighing in at only 60 pounds, the Ampeg 300/115 combo is the epitome of portability. Ampeg has managed to stuff a 15" LF driver, an HF horn with Level control, and 300W of pure Ampeg output Into this compact unit. The amp section is also exceptionally versatile. You get all the Ampeg tone and teakability pros love, thanks to its 12AX7 tube preamp, Style control, 3-Band EQ, and Ultra-High/Low switches.

Ideal for the semi-pro or professional player seeking superb tone-sculpting options and SVT-level output in an extremely transportable combo, the BA300/115 is the real deal in bass appeal.

Ampeg BA300/115 1 x 15 Bass Combo Specifications:

• Dimensions (WxHxD): 21.25" x 21.5" x 16"
• Weight: 60 lbs.
• RMS Power Output: 300W Class-D

Ampeg BA300/115 1 x 15 Bass Combo Features:

• LF Driver: 1 x 15" speaker
• HF Driver: 1 x HF horn w/Level control
• Preamp: Tube (1 x 12AX7)
• Power amp: Solid state, Class D
• Tone Controls: 3-Band EQ
• Mid Tone Control: Style
• Ultra High/Ultra Low switches
• Variable compressor
• Tube-driven balanced XLR and unbalanced 1/4" TS line out w/ Level control, Pre/Post-EQ switch, and ground lift
• Effects loop
• Removable casters

Easily portable, loud, and affordable, this is a deal you don't want to pass up. Order yours today!

Portable, powerful, and toneful.

The Ampeg BA600/210 is not just another everyday bass combo. Even though it packs dual 10" LF drivers, an HF horn (with Level control), and a whopping 600 watts of pure power, the BA600/210 is easily transportable. You get Ampeg's legendary tone-shaping thanks to it's multi-stage 12AX7 tube preamp, style control, 3-Band EQ, and Ultra-Hi/Lo switches, all of which make it extremely versatile. It even lets you choose between 2 channels, the vintage B-15 channel and a more modern tone with the simple click of a switch.

By integrating a Class D power section and universal switching power supply, Ampeg was able to keep the BA600/210's weight factor low, without sacrificing power output or sound quality. The combo also features a variable compressor, a selectable pre/post XLR tube DI with Level control (the same as Ampeg's SVT-DI), and an effects loop.

If you're a semi-pro to professional player seeking high-powered tone in an extremely versatile and portable package, this bass combo from Ampeg is a great solution.

Ampeg BA600 / 210 2x10 Bass Combo Amp Specifications:

• Dimensions (WxHxD): 21" x 23" x 15.25"
• Weight: 50 lbs.
• RMS Power Output: 600-Watts Class-D

Ampeg BA600 / 210 2x10 Bass Combo Amp Features:

• LF Driver: 2 x 10" Lightweight, custom designed Neodymium speakers
• HF Driver: 1 x HF horn w/Level control
• Preamp: Tube (2 x 12AX7)
• Channel Switching: Vintage B15 channel, Modern channel
• Power amp: solid state, Class D
• Tone Controls: 3-Band EQ
• Ultra Hi/Lo switches
• Variable compressor
• Tube-driven balanced XLR and unbalanced 1/4" TS line out w/ Level control, Pre/Post-EQ switch and ground lift
• Effects loop
• Footswitch with channel select and mute
• Removable casters

Top-quality tone, in a convenient cab. Click or call in an order today.

Portable, powerful, and toneful!

The Ampeg BA600/115 bass combo epitomizes portability. Despite containing a 15" LF driver, an HF horn (with Level control), and 600W of power, this just over four cubic feet cab is quite transportable thanks to removable casters and its very manageable 50 pound weight.

Soundwise, it's also quite versatile. You get Ampeg's legendary tone-shaping thanks to the multi-stage 12AX7 tube preamp, Style control, 3-Band EQ, and Ultra-Hi/Lo switches. With the simple click of a switch you can also choose between the vintage B-15 channel or the aptly named Modern tone.

Ampeg integrated a Class D power section and universal switching power supply, which helps keep the BA600's weight factor low, but doesn't sacrifice power output or impressive sound quality. It also features a variable compressor, selectable pre/post XLR tube DI with Level control (the same as our stunning SVT-DI), and an effects loop.

Ampeg BA600 / 115 1 x 15 Bass Combo Specifications:

• RMS Power Output: 600 Watts Class-D
  
  Dimensions (WxHxD): 21" x 23" x 15.25"
• Weight: 50 lbs.

Ampeg BA600 / 115 1 x 15 Bass Combo Features:

• LF Driver: 1 x 15" Lightweight, custom designed Neodymium speaker
• HF Driver: 1 x HF horn w/Level control
• Preamp: Tube (2 x 12AX7)
• Channel Switching: Vintage B15 channel, Modern channel
• Power amp: solidstate, Class D
• Tone Controls: 3-Band EQ
• Ultra Hi/Lo switches
• Variable compressor
• Balanced, tube-driven XLR and unbalanced 1/4" direct line out w/Level control, Pre/Post-EQ switch, and ground lift
• Effects Loop
• Footswitch for Channel select and Mute
• Removable casters

Take your bass sound to another level without breaking your back or bank. Order this fantastic combo today!

Great used alone, or paired with a two-ten cab.

The Ampeg SVT-15E Speaker Cabinet gives you an especially compact yet powerful cab that delivers a full, round tone. It features both Neutrik Speakon connectors and standard 1/4". Handles 200W RMS, 400W program. 22" x 24" x 16". 72 lbs.

Save BIG when you buy today!

Great used alone, or paired with a two-ten cab.

The Ampeg SVT-15E Speaker Cabinet gives you an especially compact yet powerful cab that delivers a full, round tone. It features both Neutrik Speakon connectors and standard 1/4". Handles 200W RMS, 400W program. 22" x 24" x 16". 72 lbs.

Save BIG when you buy today!

Deep sound, great looks, and tone from the heart!

The Ampeg SVT-2 Pro Series Amp Head is a shining example of Ampeg's attention to quality and detail. You know it's right when the sound you hear matches the sound in your imagination. For over 5 decades, Ampeg has been helping bass players reach that place where it all comes together. 5 - 12AX7 tubes in the SVT-2 Pro Head provide you with gobs of tone, texture, and gain, while the six - 6550s launch 300 heart-thumping watts into the air. Flexible EQ including 3 tone controls, a 5-position midband frequency control, and a nine-band graphic equalizer work together to help you shape the tone you demand from your gear. The 1/4" thick extruded aluminum front panel not only look good, it is essential for safe racking. With the power and flexibility of the Ampeg SVT-2 Pro Amp Head, your creative mind has the palette to deliver the goods!

Ampeg SVT-2 Pro Series Amp Head Specifications:

• Preamp tubes: 5 - 12AX7s
• Driver tubes: one 12AX7, 2 - 12AU7s
• Power amp tubes: 6 - 6550s
• RMS power: 300W into 2-4 ohms
• Tone controls: 3-band EQ
• Mid tone control: 5 position
• Graphic EQ: 9-band
• Ultralow/high boosts: yes
• Transformer-balanced line out
• Effects loop
• Preamp out/power amp in
• 19"W x 7-1/2"H x 15-3/4" D
• 70 lbs.

Ampeg SVT-2 Pro Series Amp Head Features:

• Unique tube drive control
• Input peak LED
• Input pad and bright switch
• Mute function
• Tuner out
• User bias controls
• Tube protection circuitry
• 3 oversized transformers
• Timed delayed turn-on
• DC supplied filament
• High-capacity fan

Get down with your bad self - ORDER THE SVT-2 TODAY!

A totally modern, hybrid version of the famous SVT.

The tube preamp section of the Ampeg SVT-3PRO Series Head re-creates the great bass tone that made the original SVT the most respected bass amp of all time. The power section is solid state with a toroidal transformer that generates less noise and magnetic interference. Delivers 450W @ 4 ohms and has an arsenal of tone-shaping tools: 3 bands of tone, a 5-position mid selector, 9-band graphic EQ, plus low and high boosts. Other pro features include input peak LED, input pad and bright switch, mute function, tuner out, variable line-out level, time-delayed turn on, DC-supplied filaments, and variable fan speed. 2U rackmount.

Ampeg SVT-3PRO Series Head Specifications:

• Dimensions: 19"W x 3-1/2"H x 15-1/2"D
• Weight: 26 lbs.
• RMS Power Output (8 Ohms): 275 ÿ
• RMS Power Output (4 Ohms): 450 ÿ
• RMS Power Output (2 Ohms): n/a ÿ
• Tone Controls: 3 band ÿ
• Mid Tone Control: 5 pos ÿ
• Graphic EQ: 9 band ÿ
• Ultralow/High Boosts: Yes ÿ
• Balanced Line Out: Yes (Transformer) ÿ
• Effects Loop: Yes ÿ
• Pre-amp Out/Power Amp In: Yes ÿ

Ampeg SVT-3PRO Series Head Features:

• Tube preamp section re-creates great bass tone of the original SVT
• 450W @ 4 ohms
• 3 bands of tone
• 5-position mid selector
• 9-band graphic EQ
• Low and high boosts
• Input peak LED
• Input pad and bright switch
• Mute function
• Tuner out
• Variable line-out level
• Time-delayed turn on
• DC-supplied filaments
• Variable fan speed
• 2U rackmount

Order today to get that vintage Ampeg growl!

The big gun . . . the industry's highest powered bass amp!

The Ampeg SVT-4 PRO Series Bass Head gives you lots of tonal control and lots of power. This true hybrid features a 3-tube preamp, a Mos-Fet power amp that delivers 1,200W into 4 ohms, tone-shaping tools, and all the Pro features you'll ever need. For tone control you get 3 tone controls, a 5-position mid switch, a 9-band graphic, and ultralow/high boosts. It also features a defeatable optocoupler limiter, a variable 0-7:1 compressor, an internal 24dB/octave crossover, a 50Hz-1kHz crossover point, high/low balance control, tuner out/mute function, 1/4" biamp outputs, 2 balanced line outs with transformers, 2 effects loops, and 2 preamp out/power amp ins. It gives you classic SVT tone and more.

Ampeg SVT-4 PRO Series Bass Head Specifications:

• Dimensions: 19 x 5.25 x 15.5 in.
• Weight: 42 lbs.

Ampeg SVT-4 PRO Series Bass Head Features:

• 1200 watts @ 4 Ohms (2x600W)
• 3 x 12AX7 preamp tubes
• 3-band EQ
• 9-band graphic EQ 5-position mid tone control
• Ultra low and ultra high boost switches
• 2 balanced line outputs 2 effects loops
• 1/4" and Neutrik Speakon outputs
• Input peak LED

Save BIG when you buy today!

A great cabinet for clear, dense, cutting bass tones.

4 x 10" speakers with 2" coils and 30 oz. magnets. To enhance these is an added 1" horn. The cab handles 400W RMS and 800W program. 8 ohms. 25" x 24" x 16". 91 lbs.

Save BIG when you buy today!

Greater low-end response, perfect for 5-string players!

The Ampeg SVT-410HLF Enclosure gives you plenty of volume and clean low end. This 4x10" cabinet has the same speakers and 1" horn as the SVT-410HE with 2" coils and 30 oz. magnets, but the cabinet itself is tuned differently. It's deeper and has a bottom port that results in better low-end response, down to 28Hz!

Ampeg SVT-410HLF Classic Series Bass Cabinet Specifications:

• 30"W x 24"H x 19"D
• 110 lbs.

Save BIG when you buy today!

A roomful of fat, rich tone!

The Ampeg SVT-610HLF 6x10 Bass Cabinet provides all the soul-stirring, breath-stopping punch and moan you need to hold down the bottom end. The bass guitar cab has 6 - 10" bass drivers with 30-oz. magnets and 2" voice coils, plus a 10-oz. horn with 1" coil to bring out the funky string snaps. Variable-level attenuator and resistive bulb wired in series with the horn to prevent damage. The SVT-610HLF also has rear skid rails for better protection and easier loading. 600W RMS and 1,200W program handling. 4 ohms impedance, 42Hz usable low frequency. 24"W x 40"H x 16"D. 115 lbs.

Get that deep rumble of your dreams today! Order now!

A single cabinet that can handle the biggest heads, play the biggest shows.

Decades of pro musicians don't lie, the Ampeg SVT-810E Bass Enclosure will rattle your foundation. 8 - 10" speakers produce an incredible wall-of-sound! Fidelity is enhanced by the fact that each pair of speakers is in a separate internal cabinet, which prevents standing wave interference. 800W RMS handling capability. 1,600W program handling. 4-ohm nominal impedance.

Ampeg SVT-810E Bass Enclosure Specifications:

• 48" x 26" x 16". 165 lbs.

Ampeg SVT-810E Bass Enclosure Features:

• 8 - 10" speakers
• Each pair of speakers is in a separate internal cabinet
• 800W RMS handling capability, 1,600W program, 4-ohm nominal impedance
• 26"W x 48"H x 16"D
• 165 lbs.

Make yourself heard in the biggest venues with the loudest bands. Order today!

A totally modern, hybrid version of the famous SVT.

This Ampeg Half Stack includes the SVT-3PRO Series amp head and the SVT-410HLF Classic Series bass cabinet.

The tube preamp section of the Ampeg SVT-3PRO Series Head re-creates the great bass tone that made the original SVT the most respected bass amp of all time. The power section is tube-driven solid state with a toroidal transformer that generates less noise and magnetic interference. Delivers 450W @ 4 ohms and has an arsenal of tone-shaping tools: 3 bands of tone, a 5-position mid selector, 9-band graphic EQ, plus low and high boosts. Other pro features include input peak LED, input pad and bright switch, mute function, tuner out, variable line-out level, time-delayed turn on, DC-supplied filaments, and variable fan speed. 2U rackmount.

The Ampeg SVT-410HLF Enclosure gives you plenty of volume and clean low end. This 4x10" cabinet has the same speakers and 1" horn as the SVT-410HE with 2" coils and 30 oz. magnets, but the cabinet itself is tuned differently. It's deeper and has a bottom port that results in better low-end response, down to 28Hz!

Ampeg SVT Bass Amp Half Stack Specifications:

• SVT-3PRO Series amp head
• Dimensions: 19"W x 3-1/2"H x 15-1/2"D
• Weight: 26 lbs.
• RMS Power Output (8 Ohms): 275 ÿ
• RMS Power Output (4 Ohms): 450 ÿ
• RMS Power Output (2 Ohms): n/a ÿ
• Tone Controls: 3 band ÿ
• Mid Tone Control: 5 pos ÿ
• Graphic EQ: 9 band ÿ
• Ultralow/High Boosts: Yes ÿ
• Balanced Line Out: Yes (Transformer) ÿ
• Effects Loop: Yes ÿ
• Pre-amp Out/Power Amp In: Yes ÿ
  
  SVT-410HLF Classic Series bass cabinet
• 30"W x 24"H x 19"D
• 110 lbs.

Ampeg SVT Bass Amp Half Stack Features:

• SVT-3PRO Series amp head
• Tube preamp section re-creates great bass tone of the original SVT
• 450W @ 4 ohms
• 3 bands of tone
• 5-position mid selector
• 9-band graphic EQ
• Low and high boosts
• Input peak LED
• Input pad and bright switch
• Mute function
• Tuner out
• Variable line-out level
• Time-delayed turn on
• DC-supplied filaments
• Variable fan speed
• 2U rackmount
  
  

Order today to get that vintage Ampeg growl!

It's the original all-tube monster bass amp, the classic of classics!

The reissue Ampeg SVT-CL Classic Bass Head brings back in all its glory a classic big stage amp that was the choice of players in the '60s. There's no question that the SVT-CL delivers 300W (to either 2 or 4 ohms). Its tube array includes 2 - 12AX7s in the preamp, 2 - 12AU7s and a 12AX7 for drivers, and six - 6550s for power. Controls include 3 bands of tone, a 5-way mid selector, plus ultralow and high boosts. Other pro features on the Ampeg SVT-CL Bass Head include normal and padded inputs, tube protection circuitry, auto-fault mode, fan cooling, slave output jack, 4/2 ohm selector, user biasing controls, and 3-position AC polarity switch. 24"W x 11-1/2"H x 13"D. 80 lbs.

Ampeg SVT-CL Classic Bass Head Features:

• 300W tube power
• Three-band tone/five-way mid selector/low and high boosts
• Normal and padded inputs
• Tube protection circuitry
• Fan cooled
• Slave output

Emulate, schmemulate. If you want REAL tube tone, you gotta get REAL tubes. Make the investment today. You'll never regret it.