It's the original all-tube monster bass amp, the classic of classics!

The reissue Ampeg SVT-CL Classic Bass Head brings back in all its glory a classic big stage amp that was the choice of players in the '60s. There's no question that the SVT-CL delivers 300W (to either 2 or 4 ohms). Its tube array includes 2 - 12AX7s in the preamp, 2 - 12AU7s and a 12AX7 for drivers, and six - 6550s for power. Controls include 3 bands of tone, a 5-way mid selector, plus ultralow and high boosts. Other pro features on the Ampeg SVT-CL Bass Head include normal and padded inputs, tube protection circuitry, auto-fault mode, fan cooling, slave output jack, 4/2 ohm selector, user biasing controls, and 3-position AC polarity switch. 24"W x 11-1/2"H x 13"D. 80 lbs.

Ampeg SVT-CL Classic Bass Head - Scratch 'n' Dent Features:

• 300W tube power
• Three-band tone/five-way mid selector/low and high boosts
• Normal and padded inputs
• Tube protection circuitry
• Fan cooled
• Slave output

Emulate, schmemulate. If you want REAL tube tone, you gotta get REAL tubes. Make the investment today. You'll never regret it.

A vintage reissue of the highly sought after 1970's blue-line SVT head.

With the new SVT-VR, the Ampeg engineering and product development teams had one primary goal-get as close to the coveted tone of the classic SVT as possible. As a result, the preamp stage, power section, and even the rocker switches of the new SVT-VR emulate the exact signal path, tone, and vibe of the original.

The all-tube, 300-watt SVT-VR amplifier is driven by a total of six 6550 power tubes for massive power and tone. In addition to the '70s style dials and rocker switches, the SVT-VR's preamp circuitry has been faithfully re-created to match the original.

Ampeg SVT-VR Vintage Reissue 300 Watt SVT Amp Head Features:

• 300W
• 2-channel preamp
• 6 - 6550 power tubes
• Original power amp output spec and tube complement
• Original preamp signal path
• Original blue-line graphics and cosmetics
• Original EQ rocker switches
• XLR output
• Slave out

The signature sonics and looks of the original. Order now!

Expanded power amp section for more headroom with classic tube feel.

The Ampeg SVT450H 450W Classic Series Head has authentic vintage Ampeg tube sound and the Classic series look. 450W MOSFET output provides the most tube-like feel of any amp in its class. Optocoupler limiter circuit maximizes clean acoustic output and crunches a little when defeated. 3-band EQ plus 9-band graphic EQ. Pre/post EQ XLR line out, line out level select, input pad, variable speed fan.

Ampeg SVT450H 450W Classic Series Head Features:

• Vintage Ampeg tube sound
• 450W MOSFET output
• Defeatable optocoupler limiter
• Pre/post EQ XLR line out
• Line out level select
• Variable-speed fan
• 3-band EQ
• 9-band graphic EQ
• Peak LED indicator
• 24"W x 11-1/2"H x 13"D
• 44 lbs.

The look and tone of vintage Ampeg without the backache or tube replacement cost. Order yours now.

An innovative emulation circuit re-creates the signature growl of classic, tube-driven SVTs.

The Ampeg SVT8Pro bass amp head combines a vintage SVT preamp-complete with two 12AX7 and two 12AU7 tubes-with a powerful 2500-watt switch-mode Class D amplifier. Like all SVT Pro Series heads, the SVT8 Pro's front panel controls include an expanded EQ section for fine-tuning your sound.

The unique power amp emulation circuit allows users to dial in the sound of an overdriven tube amp at any volume and with varying intensity.

Also features variable speed fan, DC-supplied tube filaments for noise-free performance, and Neutrik Speakon connectors for quick set up and better conductivity. Rackmountable (2RU).

Ampeg SVT8PRO Rackmount Bass Amp Head Specifications:

• 1,300W @ 4 ohms, 2500W @ 2 ohms
• 25 lbs.

Ampeg SVT8PRO Rackmount Bass Amp Head Features:

• 1,300W @ 4 ohms, 2500W @ 2 ohms
• Multi-tube preamp with '70s-era signal path
• Switch mode power supply
• 5-position Ultra Low switch
• Power amp reduction section with Drive and Power controls
• Emulation circuit delivers overdriven tube amp sound

Modern day reliability and vintage sound. Order now!

The ABM 115 delivers controlled low end with great response.

The ABM 115 is a 300W, 8-ohm bass cabinet with a single 15" Ashdown BlueLine driver.

Ashdown BlueLine speakers are designed to achieve a superb balance of power; transparency; and deep, controlled low end without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound.

The precision-tuned, birch plywood cabinet is protected by a tough, buffalo leather cloth covering and chromed metal corners. Special Ashdown-designed metal handles are used in favor of inferior flip handles, which can rattle after years of use.

Ashdown ABM 115 15" Bass Speaker Cabinet Specifications:

• Power handling: 300W continuous, 600W program
• 8-ohm impedance
• Frequency Response: 37Hz-2kHz
• SPL: 98dB 1W@1m
• 24"W x 26"H x 16-1/2"D
• 73 lbs.

Ashdown ABM 115 15" Bass Speaker Cabinet Features:

• 300W continuous, 600W program power handling
• 15" BlueLine speaker
• High-grade birch plywood construction
• Buffalo leather cloth covering
• Chromed metal corners
• Metal handles

Add some serious bottom end to your rig with this big, bad 15-incher. Call or click to order now!

The ABM 115 delivers controlled low end in a compact cab.

The ABM 115 is a 300W, 8-ohm bass cabinet with a single 15" Ashdown BlueLine driver.

Ashdown BlueLine speakers are designed to achieve a superb balance of power; transparency; and deep, controlled low end without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound.

The precision-tuned, birch plywood cabinet is protected by a tough, buffalo leather cloth covering and chromed metal corners. Special Ashdown-designed metal handles are used in favor of inferior flip handles, which can rattle after years of use.

Ashdown ABM 115 15" Compact Bass Speaker Cabinet Specifications:

• Power handling: 300W continuous, 600W program
• 8-ohm impedance
• Frequency Response: 41Hz-4kHz
• SPL: 98dB 1W@1m
• 24"W x 18-2/3"H x 13-1/5"D
• 62 lbs.

Ashdown ABM 115 15" Compact Bass Speaker Cabinet Features:

• 300W continuous, 600W program power handling
• 15" BlueLine speaker
• High-grade birch plywood construction
• Buffalo leather cloth covering
• Chromed metal corners
• Metal handles

Add some serious bottom end to your rig with this big, bad 15-incher. Call or click to order now!

The ABM 210T produces rich, full-range tone with serious punch.

The ABM 210T is a 300W, 8-ohm bass cabinet with 2 - 10" Ashdown BlueLine drivers and a tweeter.

Ashdown BlueLine speakers are designed to achieve a superb balance of power; transparency; and deep, controlled low end without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound.

The precision-tuned, birch plywood cabinet is protected by a tough, buffalo leather cloth covering and chromed metal corners. Special Ashdown-designed metal handles are used in favor of inferior flip handles, which can rattle after years of use.

Ashdown ABM 210T 2X10" Compact Bass Speaker Cabinet with Tweeter Specifications:

• Power handling: 300W continuous, 600W program
• 8-ohm impedance
• Frequency Response: 75Hz-20kHz
• SPL: 102dB 1W@1m
• 23-1/4"W x 27-1/2"H x 17-3/4"D
• 62 lbs.

Ashdown ABM 210T 2X10" Compact Bass Speaker Cabinet with Tweeter Features:

• 300W continuous, 600W program power handling
• 2 - 10" BlueLine speakers
• High-frequency tweeter
• High-grade birch plywood construction
• Buffalo leather cloth covering
• Chromed metal corners
• Metal handles

Impeccable sound for the most demanding bassists. Call or click to buy now!

The ABM 410T has all the midrange punch you need with controlled low end.

The ABM 410T is a 600W, 8-ohm bass cabinet with 4 - 10" Ashdown BlueLine drivers and a tweeter.

The precision-tuned, birch plywood cabinet is protected by a tough, buffalo leather cloth covering and chromed metal corners. Special Ashdown-designed metal handles are used in favor of inferior flip handles, which can rattle after years of use.

Ashdown BlueLine speakers are designed to achieve a superb balance of power; transparency; and deep, controlled low end without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound.

Ashdown ABM 410T 4X10" Bass Speaker Cabinet with Tweeter Specifications:

• Power handling: 600W continuous, 900W program
• 8-ohm impedance
• Frequency Response: 70Hz-20kHz
• SPL: 103dB 1W@1m
• 24"W x 26"H x 16-1/2"D
• 79 lbs.

Ashdown ABM 410T 4X10" Bass Speaker Cabinet with Tweeter Features:

• 600W continuous, 900W program power handling
• 4 - 10" BlueLine speakers
• High-frequency tweeter
• High-grade birch plywood construction
• Buffalo leather cloth covering
• Chromed metal corners
• Metal handles

Impeccable sound for the most demanding bassists. Call or click to buy now!

The 414T adds bright midrange and punchy bottom end to any rig.

The ABM 410T is a 600W, 4-ohm bass cabinet with 4 - 10" Ashdown BlueLine drivers and a tweeter.

The precision-tuned, birch plywood cabinet is protected by a tough, buffalo leather cloth covering and chromed metal corners. Special Ashdown-designed metal handles are used in favor of inferior flip handles, which can rattle after years of use.

Ashdown BlueLine speakers are designed to achieve a superb balance of power; transparency; and deep, controlled low end without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound.

Ashdown ABM 414T 4X10" Bass Speaker Cabinet with Tweeter Specifications:

• Power handling: 600W continuous, 900W program
• 4-ohm impedance
• Frequency Response: 70Hz-20kHz
• SPL: 103dB 1W@1m
• 24"W x 26"H x 16-1/2"D
• 79 lbs.

Ashdown ABM 414T 4X10" Bass Speaker Cabinet with Tweeter Features:

• 600W continuous, 900W program power handling
• 4 - 10" BlueLine speakers
• High-frequency tweeter
• High-grade birch plywood construction
• Buffalo leather cloth covering
• Chromed metal corners
• Metal handles

Impeccable sound for the most demanding bassists. Call or click to buy now!

The After Eight is a small practice amp packed with big Ashdown tone.

The After Eight bass practice amp pumps 15 watts through an 8" Ashdown BlueLine speaker. Sounds can be shaped quickly and intuitively using bass, middle, and treble controls, supplemented by a pre-shaped 'deep' switch. Headphone output allows private practice.

Ashdown After Eight 8" Combo Bass Amp Specifications:

• Power Output: 15 watts RMS
• Input impedance: 1M ohm
• Input signal range: 100mV to 10V
• 14-4/5"W x 16-1/3"H x 16"D
• 32 lbs.

Ashdown After Eight 8" Combo Bass Amp Features:

• 15W
• 8" Ashdown BlueLine speaker
• 3-band EQ
• Deep switch
• Headphone output
• Extension cab jack

You shouldn't have to sacrifice good tone when you practice. With this amp, you won't. Call or click to buy now!

The AL-MK500 captures the sound of legendary U.K. bassist Mark King.

Ashdown Labs worked in consultation with Mark to build an amplifier that met his requirements for absolute fidelity and clarity, precision tone shaping, and massive power on tap for stunning dynamics. The result is the AL-MK500, a 575W RMS funk powerhouse with low-impedance instrument input, illuminated VU meter, Harmonic Emphasis, 12-band graphic EQ, switchable pre- and post-EQ balanced direct output, tuner output with mute switch, line output, effects loop, and speaker outputs on jack and Speakon connectors. Rackmountable (2RU).

Ashdown AL-MK500 Mark King Signature Rackmount Bass Amp Head Specifications:

• Output Power: 575W RMS/900W Peak
• Output Impedance: 4 ohm
• Jack Input Impedance: 3.9MOhm
• Jack Input Range: 150mV to 20V P-P
• XLR Input Impedance: Balanced 600 ohm
• XLR Input Range: 100mV to 10V p-p
• FX Return Impedance: 10kOhm
• FX Return Level: 0dBu nominal
• Tuner Output Impedance: 22kOhm
• Tuner Output Level: 0dBu nominal
• Line Output Impedance: 1kOhm
• Line Output Level: 0dBu nominal
• Effects Send Impedance: 22kOhm
• Effects Send Level: 0dBu nominal
• DI Output Impedance: 600 ohm balanced
• DI Output Level: -20dBu nominal
• Digital Output: none
• Graphic EQ: ±15dB @ 12 center frequencies
• 20-7/10"W x 7-7/10"H x 12-4/5"D
• 31 lbs.

Ashdown AL-MK500 Mark King Signature Rackmount Bass Amp Head Features:

• 575W RMS, 900W peak
• 12-band graphic EQ
• Illuminated VU meter
• Harmonic Emphasis
• Rackmountable (2RU)
• Switchable pre- and post-EQ balanced direct out
• Tuner output with mute switch
• Line out
• FX loop
• 1/4" and Speakon connectors

'Dynamic and alive' is how Mark King describes his signature amp. Sounds good, doesn't it? Call or click to buy now!

The Electric Blue 180 offers fine Ashdown tone for players on a budget.

The Electric Blue 180 head produces 180 watts of Ashdown goodness via a fan-cooled, fast-transient power stage. The preamp section boasts active/passive instrument inputs, a VU-style LED input meter, 5-band EQ with Bright and Deep switches, front panel-mounted DI output, FX loop, and tuner/line out. The mighty Ashdown subharmonic generator tracks the main signal and reproduces it an octave lower, and the level control lets you to add just the right amount of low-end reinforcement-everything from a subtle thickening of the sound to unbridled, bone-crushing tone.

A 12", high-performance Ashdown BlueLine bass driver ensures exceptional attack, clarity, and low-end performance, while the extension speaker output can be used to connect an additional cabinet for use in larger venues. The cabinet is finished in a tough, scuff-proof carpet covering with protective corners and a kick-proof metal grille.

Ashdown Electric Blue 12-180 Combo Bass Amp Specifications:

• Power Output: 180 watts RMS
• High Input: Impedance 3.9mOhm/Input range 150mV-20V p-p
• Low Input: Impedance 10kOhm/Input range 300mV-40V p-p
• Line Input: Impedance 22kOhm/Input level 0dBu nominal
• Effects Return: Impedance 22kOhm/Level 0dBu nominal
• Tuner Output: Impedance 22kOhm/Level 0dBu nominal
• Effects Send: Impedance 22kOhm/Level 0dBu nominal
• DI Output: 600 ohm balanced/Level -20dBu nominal
• Speaker Outputs: Minimum impedance 4 ohm
• Bass: ±15dB @ 100Hz
• Lo Mid: ±15dB @ 220Hz
• Middle: ±15dB @ 660Hz
• Hi Mid: ±15dB @ 1.6kHz
• Treble: ±15dB @ 7kHz shelving
• Deep: +8dB @ 50Hz
• Bright: +10dB @ 10kHz
• Signal to Noise: Better than 80dB (EQ flat)
• Distortion: Less than 0.5% THD
• Frequency Response: -3dB at 33Hz and 25kHz
• Power Requirements: 230/115v
• 20-2/3"W x 7-2/3"H x 15-1/10"D
• 18 lbs.

Ashdown Electric Blue 12-180 Combo Bass Amp Features:

• 180W RMS
• 12" Ashdown BlueLine driver
• Fan-cooled, fast-transient power stage
• Active/passive instrument inputs
• VU-style LED input meter
• 5-band EQ
• Bright/Deep switches
• FX loop
• Front-panel direct output
• Tuner/line out
• Subharmonic generator
• Extension cab output
• Scuff-proof carpet covering
• Reinforced corners
• Sturdy metal grille

Pro tone that won't break the bank. Call or click to order now!

The Electric Blue 180 offers fine Ashdown tone for players on a budget.

The Electric Blue 180 head produces 180 watts of Ashdown goodness via a fan-cooled, fast-transient power stage. The preamp section boasts active/passive instrument inputs, a VU-style LED input meter, 5-band EQ with Bright and Deep switches, front panel-mounted DI output, FX loop, and tuner/line out.

The mighty Ashdown subharmonic generator tracks the main signal and reproduces it an octave lower, and the level control lets you add just the right amount of low-end reinforcement-everything from a subtle thickening of the sound to unbridled, bone-crushing tone.

A 15" high-performance Ashdown BlueLine bass driver ensures exceptional attack, clarity, and low-end performance, while the extension speaker output can be used to connect an additional cabinet for use in larger venues. The cabinet is finished in a tough, scuff-proof carpet covering with protective corners and a kick-proof metal grille.

Ashdown Electric Blue 15-180 Bass Combo Amp Specifications:

• Power Output: 180 watts RMS
• High Input: Impedance 3.9mOhm/Input range 150mV-20V p-p
• Low Input: Impedance 10kOhm/Input range 300mV-40V p-p
• Line Input: Impedance 22kOhm/Input level 0dBu nominal
• Effects Return: Impedance 22kOhm/Level 0dBu nominal
• Tuner Output: Impedance 22kOhm/Level 0dBu nominal
• Effects Send: Impedance 22kOhm/Level 0dBu nominal
• DI Output: 600 ohm balanced/Level -20dBu nominal
• Speaker Outputs: Minimum impedance 4 ohms
• Bass: ±15dB @ 100Hz
• Lo: ±15dB @ 220Hz
• Middle: ±15dB @ 660Hz
• Hi Mid: ±15dB @ 1.6kHz
• Treble: ±15dB @ 7kHz shelving
• Deep: +8dB @ 50Hz
• Bright: +10dB @ 10kHz
• Signal to Noise: Better than 80dB (EQ flat)
• Distortion: Less than 0.5% THD
• Frequency Response: -3dB at 33Hz and 25kHz
• Power Requirements: 230/15v
• 19-1/10"W x 27-1/4"H x 26-1/5"D
• 55 lbs.

Ashdown Electric Blue 15-180 Bass Combo Amp Features:

• 180W RMS
• 15" Ashdown BlueLine driver
• Fan-cooled, fast-transient power stage
• Active/passive instrument inputs
• VU-style LED input meter
• 5-band EQ
• Bright/Deep switches
• FX loop
• Front-panel direct output
• Tuner/line out
• Subharmonic generator
• Extension cab output
• Scuff-proof carpet covering
• Reinforced corners
• Sturdy metal grille

Pro tone that won't break the bank. Call or click to order now!

The Electric Blue 180 offers fine Ashdown tone for players on a budget.

The Electric Blue 180 head produces 180 watts of Ashdown goodness via a fan-cooled, fast-transient power stage. The preamp section boasts active/passive instrument inputs, a VU-style LED input meter, 5-band EQ with Bright and Deep switches, front panel-mounted DI output, FX loop, and tuner/line out. The mighty Ashdown subharmonic generator tracks the main signal and reproduces it an octave lower, and the level control lets you to add just the right amount of low-end reinforcement-everything from a subtle thickening of the sound to unbridled, bone-crushing tone.

Ashdown Electric Blue 180 Bass Amp Head Specifications:

• Power Output: 180 watts RMS
• High Input: Impedance 3.9MOhm/Input range 150mV-20V p-p
• Low Input: Impedance 10kOhm/Input range 300mV-40V p-p
• Line Input: Impedance 22kOhm/Input level 0dBu nominal
• Effects Return: Impedance 22kOhm/Level 0dBu nominal
• Tuner Output: Impedance 22kOhm/Level 0dBu nominal
• Effects Send: Impedance 22kOhm/Level 0dBu nominal
• DI Output: 600 ohms balanced/Level -20dBu nominal
• Speaker Outputs: Minimum impedance 4 ohms
• Bass: ±15dB @ 100Hz
• Lo Mid: ±15dB @ 220Hz
• Middle: ±15dB @ 660Hz
• Hi Mid: ±15dB @ 1.6kHz
• Treble: ±15dB @ 7kHz shelving
• Deep: +8dB @ 50Hz
• Bright: +10dB @ 10kHz
• Signal to Noise: Better than 80dB (EQ flat)
• Distortion: Less than 0.5% THD
• Frequency Response: -3dB at 33Hz and 25kHz
• Power Requirements: 230/115v
• 20-2/3"W x 7-2/3"H x 15-1/10"D
• 18 lbs.

Ashdown Electric Blue 180 Bass Amp Head Features:

• 180W RMS
• Fan-cooled, fast-transient power stage
• Active/passive instrument inputs
• VU-style LED input meter
• 5-band EQ
• Bright/Deep switches
• FX loop
• Front-panel direct output
• Tuner/line out
• Subharmonic generator

Pro tone that won't break the bank. Call or click to order now!

The Five Fifteen packs serious punch and big bottom end into an affordable combo.

Named in memory of the late, great John Entwistle (whose live solos during the Who song "5:15" made many a jaw drop), the Five Fifteen combo pumps out 100w of power through a 15" BlueLine speaker. Adjust your tone quickly and easily with the bass, mid, and treble controls. Give your sound a quick boost with the pre-shaped Deep switch. Headphone output allows for silent practice. External speaker jack.

Ashdown Five Fifteen 15" Combo Bass Amp Specifications:

• Output Power: 100w RMS
• Input Impedance: 1M Ohm
• Input Signal Range: 100mV to 10V
• 18"W x 21-2/3"H x 21-2/5"D
• 59 lbs.

Ashdown Five Fifteen 15" Combo Bass Amp Features:

• 100w
• 15" Ashdown BlueLine driver
• 3-band EQ
• Deep switch
• Headphone output
• External speaker jack

Big and bold, just like the Ox. Call or click to buy now!

The MAG 115 has extra depth for fat low-end.

The MAG 115 is built extra-deep and loaded with a 15", 250W Ashdown BlueLine speaker for exceptional attack, clarity, and low end. Tough black carpet exterior and steel grille add protection and a pro look. Recessed handles make it easy to move around.

Ashdown BlueLine speakers achieve a superb balance of power, transparency, and deep, controlled low end without sacrificing any of the mid-band attack and high-end brightness that are so important in modern bass sound.

Ashdown MAG 115 1X15" Deep Bass Cabinet Specifications:

• 250W continuous power handling
• 8-ohm impedance
• Frequency response: 37Hz-2kHz
• SPL: 98dB 1W@1m
• 23-3/4"W x 18-2/5"H x 16-1/2"D
• 44 lbs.

Ashdown MAG 115 1X15" Deep Bass Cabinet Features:

• 15" Ashdown BlueLine speaker
• 250W continuous handling
• Extra-deep cabinet
• Black carpet covering
• Steel grille
• Recessed handles

If room-shaking bass is what your rig needs, the MAG 115 is your cab. Call or click to buy now!

The 210T has got lots of punch and bright midrange.

The MAG 210T is built extra-deep and loaded with 2 - 10" Ashdown BlueLine speakers and a tweeter for exceptional attack, clarity, and low end. Tough black carpet exterior and steel grille add protection and a pro look. Recessed handles make it easy to move around.

Ashdown BlueLine speakers achieve a superb balance of power, transparency, and deep, controlled low end without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound.

Ashdown MAG 210T 2X10" Deep Bass Cabinet with Tweeter Specifications:

• Power Handling: 200W continuous
• Impedance: 8 ohms
• Frequency Response: 60Hz-20kHz
• SPL: 98dB 1W @1m
• 23-3/4"W x 18-2/5"H x 16-1/2"D
• 42 lbs.

Ashdown MAG 210T 2X10" Deep Bass Cabinet with Tweeter Features:

• 200W continous power handling
• 2 - 10" Ashdown BlueLine speakers and tweeter
• Extra-deep cabinet
• Black carpet exterior
• Steel grille
• Recessed handles

The 210T has bold Ashdown tone at a price you can handle. Call or click to order now!

The MAG 300H has massive power and classic Ashdown tone.

The MAG 300H amplifier head features a potent, fan-cooled 307W RMS power section. Rotary bass, mid, and treble controls are supplemented by smaller rotary controls, providing 15dB of cut and boost at 220Hz and 1.6kHz, making it a comprehensive 5-band EQ section. Additionally, front panel push switches for Bright and Deep settings provide instant access to either attacking or warm, rounded sounds. For enhanced low-end response, the MAG 300H has Ashdown's acclaimed subharmonic generator ready to take your tone on a deep dive. Inputs are provided for active and passive instruments, and the front panel also features an effects send and return, a tuner/line output, and a balanced DI output for direct connection to a mixing console.

Ashdown MAG 300H 300W Bass Amp Head Specifications:

• Output: 307W RMS
• Signal to Noise: Better than 80dB (EQ flat)
• Frequency Response: 17Hz-300kHz
• Distortion: Less than 0.5% THD
• Dimensions: 20-1/2"W x 7-3/4"H x 15-1/4"D
• Weight: 19 lbs.

Ashdown MAG 300H 300W Bass Amp Head Features:

• 307W RMS power
• Bass, middle, and treble controls
• Rotary controls for 15dB of cut/boost at 220Hz and at 1.6kHz
• Front panel shape switches for Bright and Deep settings
• Ashdown's acclaimed subharmonic generator for enhanced low-end response
• Active and passive bass inputs
• Effects send and return
• Tuner/line output
• Balanced DI output

The MAG 300H is everything you need in an amp without the frills. Order today and play big.

The MAG 410T will add bright, bold Ashdown tone to any rig.

The MAG 410T is built extra-deep and loaded with 4 - 10" Ashdown BlueLine speakers and a tweeter for exceptional attack, clarity, and low end. Tough black carpet exterior and steel grille add protection and a pro look. Recessed handles make it easy to move around.

Ashdown BlueLine speakers achieve a superb balance of power, transparency and deep, controlled low end, without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound.

Ashdown MAG 410T 4X10" Deep Bass Cabinet with Tweeter Specifications:

• Power Handling: 450W continuous
• Impedance: 8 ohms
• Frequency Response: 60Hz-20kHz
• SPL: 101dB 1W @1m
• 23-3/4"W x 25-3/4"H x 16-1/2"D
• 61 lbs.

Ashdown MAG 410T 4X10" Deep Bass Cabinet with Tweeter Features:

• 450W continous power handling
• 4 - 10" Ashdown BlueLine speakers and tweeter
• Extra-deep cabinet
• Black carpet exterior
• Steel grille
• Recessed handles

Add the punch of an Ashdown 4x10" cabinet to your rig without going broke. Call or click to buy now!

The MAG 600H has massive power and classic Ashdown tone.

Bigger brother to the MAG300 model, the Ashdown MAG 600H bass amplifier head features a potent, fan-cooled 575W RMS power section. Rotary bass, mid, and treble controls are supplemented by smaller rotary controls, providing 15dB of cut and boost at 220Hz and 1.6kHz, making it a comprehensive 5-band EQ section. Additionally, front panel push switches for Bright and Deep settings provide instant access to either punchy, attacking or warm, rounded sounds. For enhanced low-end response, the MAG 600H has Ashdown's acclaimed subharmonic generator, so it's ready to take your tone on a deep dive. Inputs are provided for active and passive instruments, and the front panel also features an effects send and return, a tuner/line output, and a balanced DI output for direct connection to a mixing console.

Ashdown MAG 600H Bass Amp Head Specifications:

• Output: 575W RMS
• Signal to Noise: Better than 80dB (EQ flat)
• Frequency Response: 17Hz-300kHz
• Distortion: Less than 0.5% THD
• Weight: 21 lbs.

Ashdown MAG 600H Bass Amp Head Features:

• 575W RMS power
• Bass, middle, and treble controls
• Rotary controls for 15dB of cut/boost at 220Hz and at 1.6kHz
• Front panel shape switches for Bright and Deep settings
• Ashdown's acclaimed subharmonic generator for enhanced low-end response
• Active and passive bass inputs
• Effects send and return
• Tuner/line output
• Balanced DI output

The MAG 600H is everything you need in an amp without the frills. Order today and play big.