The Fener 410 PRO is a bass cab designed in conjunction with the makers of Eminence speakers. This state-of-the-art 4x10 bass cabinet holds cast-frame speakers that reproduce focused and punchy bass frequencies while still delivering sub-level feeling that will strip the paint off your car!

The 410 PRO SL's two upper drivers and tweeter are tilted back 25 degrees, allowing audience and artist alike to hear the full range of the instrument. It's rated at 1,000 watts program (500 watts continuous at 8 ohms), with features including four 10" U.S.-made cast-frame Eminence drivers, a compression driver horn with attenuator control, 1/4" inputs and five-way binding posts, stackable corners, seven-ply birch cabinet covered in rugged black carpet, heavy-duty hardware and metal grille.

Fender 410 PRO 4x10 Bass Speaker Cabinet Specifications:

• Covering: Black Carpet with Black Metal Grille
• Weight: 78 lbs. (35.4 kg)
• Dimensions: Height: 25.5" (64.8 cm),
• Width: 25.5" (64.8 cm),
• Depth: 18.5" (47.0 cm)
• Power Handling: 1000 Watts (Program), 500 Watts (Continous) Handling Capability
• Accessories: Removable Casters p/n 0056483000

Fender 410 PRO 4x10 Bass Speaker Cabinet Features:

• Ohms: 8 ohms Impedence
• Speakers: 4-10" Fender® Special Design Cast Frame Eminence® 8 ohm, 125 watt Speakers, p/n 0057982000,
• 1- Foster® Horn, p/n 0048847000
• Features: Unique Slant Baffle Design,
• Attenuator on Horn,
• Heavy Duty Dual, Parallel Wired, 1/4" Jacks,
• 5-Way Binding Posts for Multiple Connecting Options,
• Perforated Metal Speaker Grille,
• Heavy Duty Spring Loaded Handles,
• 3/4" 7-Ply Birch/Maple Plywood
• Controls: Horn Attenuator (Rear Panel)

Get the bass tone and feel you've been missing! Call or click today to order.

The Fender 610 PRO Bass Speaker Cabinet takes its cue from the 810 Pro but affords a similar sonic power and prowess in a package small enough to transport in most vehicles. 3 chambered and ported sections of 2x10" Fender Special Design Eminence cast-frame drivers deliver power and focus that can handle most any musical application.

The 610 PRO bass cabinet's high-frequency compression driver horn can be adjusted using the attenuator located on the back. The Fender 610 PRO is preferred by bassists who find an 8x10 too large for medium-size venues. Fender put a slide rails across the back to make it easier for you to maneuver in and out of a vehicle. The 610 PRO bass cab's handles and wheels makes it easier to move this large Fender speaker cabinet to your gig.

Fender 610 PRO 6x10 Bass Speaker Cabinet Specifications:

• Weight: 117 lbs.
• Dimensions: 26"W x 36 5/8"H x 16.25"D
• Impedance: 4 ohm
• Rated at 1,600 watts program (800 watts continuous)

Fender 610 PRO 6x10 Bass Speaker Cabinet Features:

• 6 x 10" Fender Special Design speakers
• Foster horn
• Horn attenuator (rear panel)
• Black vinyl covering
• Nickel grille

Amazing stage presence, yet small enough to fit in your car. Order it today.

The Fender 610 PRO Bass Speaker Cabinet takes its cue from the 810 Pro but affords a similar sonic power and prowess in a package small enough to transport in most vehicles. 3 chambered and ported sections of 2x10" Fender Special Design Eminence cast-frame drivers deliver power and focus that can handle most any musical application.

The 610 PRO bass cabinet's high-frequency compression driver horn can be adjusted using the attenuator located on the back. The Fender 610 PRO is preferred by bassists who find an 8x10 too large for medium-size venues. Fender put a slide rails across the back to make it easier for you to maneuver in and out of a vehicle. The 610 PRO bass cab's handles and wheels makes it easier to move this large Fender speaker cabinet to your gig.

Fender 610 PRO 6x10 Bass Speaker Cabinet - Scratch 'n' Dent Specifications:

• Weight: 117 lbs.
• Dimensions: 26"W x 36 5/8"H x 16.25"D
• Impedance: 4 ohm
• Rated at 1,600 watts program (800 watts continuous)

Fender 610 PRO 6x10 Bass Speaker Cabinet - Scratch 'n' Dent Features:

• 6 x 10" Fender Special Design speakers
• Foster horn
• Horn attenuator (rear panel)
• Black vinyl covering
• Nickel grille

Amazing stage presence, yet small enough to fit in your car. Order it today.

Merging the easy-to-use front end from the 400 PRO and the extreme power of the Bassman 1200, the 800 is a toneful monster that puts total tweakability at your fingertips. It delivers 800W at 4 ohms and 1,200W at 2 ohms via either Speakon or 1/4" connectors. The anodized silver faceplate is easy to read and is flanked by heavy-duty chrome handles. Tone is handled by a 5-band EQ that includes a 3-band semi-parametric EQ with on/off and gain control. A Room Balance control compensates for extreme acoustics. Other controls include an Enhance switch that emphasizes highs and lows, a variable compressor, balanced XLR output with pre/post EQ switch, ground llift and level control for line out, mute switch, tuner output, effects loop, and one-button footswitch for EQ.

Fender 800 PRO Bass Head Specifications:

• 19"W x 3-1/2"H x 16"D
• 36 lbs.

Fender 800 PRO Bass Head Features:

• 800W at 4 ohms ; 1,200W at 2 ohms
• Speakon and 1/4" connectors
• Legible anodized silver faceplate
• Heavy-duty chrome handles
• 5-band EQ with 3-band semi-parametric EQ with on/off and gain control
• Room Balance control compensates for extreme acoustics
• Enhance switch emphasizes highs and lows
• Variable compressor
• Balanced XLR output with pre/post EQ switch
• Ground lift and level control for line out
• Mute switch
• Tuner output
• Effects loop
• One-button footswitch for EQ

Click or call to go PRO now!

The Fender B-DEC 30 (Bass Digital Entertainment Center) is both an entertainment center and a teaching/training tool for bass players. It includes 70 loops called Performance Presets which provide instrumental accompaniment for many musical styles and teacher loops which help bassists develop and refine basic techniques. The B-DEC 30 has eight of the most popular bass amps and 18 effects models combined with musical loops for endless jamming fun. Each loop has drum, guitar, and keyboard sounds along with a guide bass track, and each instrument can easily be muted. The internal synthesizer with MIDI interface allows playback of any MIDI file and can store up to 64 MIDI song files. The included complete method book has transcription and tablature for every preset along with suggested techniques, areas of focus, and playing variations. 15"W x 17"H x 14.5"D. 33 lbs.

Fender B-DEC 30 Bass Digital Entertainment Center Features:

• 30W
• 10" Fender Special Design Speaker
• High-frequency piezo horn
• Tilt-back cabinet
• Headphone jack
• 70 Performance Preset loops
• Instrument backing tracks in various styles
• Teacher loops
• Transpose and tune function
• Tempo control
• Volume control over each instrument in loop
• Preset loop model and effect controls
• 8 bass amp models
• 18 effects
• 3 reverbs
• 28 second phrase sampler
• Internal MIDI synth
• Storage for 64 MIDI song files
• Tuner
• Method book
• Speaker out
• RCA aux in
• Line level 1/4" out
• MIDI I/O
• Rear panel teacher input jack
• Footswitch jack
• Black carpet covering
• Black metal grille
• 15"W x 17"H x 14.5"D
• 33 lbs.
• Optional ULT-4 Footswitch

Get your groove on with the ultimate practice tool! Order your B-DEC today!

The Fender Bassman 100 Combo Amp features a tilt-back real wood cab. 100W and single 10" driver with horn, 3-band EQ with semi-parametric mid, contour, and XLR output for recording or PA reinforcement with level, pre/post switch, and ground lift. RCA aux in for CD player, effects loop, and more.

A horn attenuator control accommodates brighter thumb-style playing (full horn) or warm, standup-style (horn off) or anything in-between.

A nicely configured cab that will serve upright players with gigs in coffee houses and restaurants and electric players needing a stage monitor while sending their sound to a PA. Its pro-level features make it a worthy and portable practice amp.

Fender Bassman 100 Combo Amp Specifications:

• 15"W x 17"H x 14-1/2"D
• 25 lbs.

Fender Bassman 100 Combo Amp Features:

• Full internal power with removable speaker cord that can be used for an external cab
• 100W power
• Fender special-design Eminence USA PRO speaker with stamped frame
• Compression driver horn with full attenuation
• Real wood cab
• Tilt-back cab design
• Spring-loaded handles
• 3 bands of EQ with semi-parametric mid
• XLR output with level for recording or PA reinforcement
• -6dB input pad
• Mute switch with LED
• Contour (a variable scoop applied to mids)
• Headphone jack for silent practice
• Effects loop
• Tuner out

Any bassist can use a super portable combo with pro features and sound. This is it. Order today.

The Bassman 115 bass cabinet was designed to provide solid, full tone. And with 500 watts programmable power (250 watts continuous) at 8 ohms, one Fender Special Design 15" Eminence speaker and a compression driver horn with full attenuator, it's ideal for medium power usage.

The Bassman 115 cab has similar tonal characteristics to the PRO series speaker cabinets in a low power-handling model, and features carpet covering with metal grille, removable casters, spring-loaded handles and 1/4" and Speakon® inputs. Its narrow depth provides brighter tone-and also makes it easier to transport!

Fender Bassman 115 1x15 Bass Cabinet Specifications:

• Covering: Black Carpet with Black Metal Grille
• Weight: 54 lbs. (25 kg)
• Dimensions: Height: 20.75" (52.3 cm),
• Width: 23" (58.4 cm),
• Depth: 14.5" (36.83 cm)
• Power Handling: 500 Watts (Program), 250 Watts (Continous) Handling Capability

Fender Bassman 115 1x15 Bass Cabinet Features:

• Ohms: 8 ohms Impedence
• Speakers: 1-15" Fender® Special Design Eminence®, 8 ohm, 250 watt Speaker, P/N 0069148000,
• 1 Compression Driver High Frequency Horn P/N 0048847000
• Features: Dual, Parallel Wired, 1/4" Jacks, Perforated Metal Speaker Grille, Heavy Duty Spring Loaded Handles

Order today with the protection of our 45-day lowest price and total satisfaction guarantees!

Musicians love the Fender Bassman 150 Bass Combo Amp for its reliability. Tilt-back real wood cab; 150W and single 12" driver with horn; 3-band EQ with semi-parametric mid, contour, and XLR output for recording or PA reinforcement with level, pre/post switch, and ground lift. RCA aux in for CD player, effects loop, onboard compressor and more.

Fender Bassman 150 Bass Combo Amp Specifications:

• 19-1/4"W x 21"H x 17-1/4"D
• 39 lbs.

Fender Bassman 150 Bass Combo Amp Features:

• Full internal power with removable speaker cord that can be used for an external cab
• 150W power
• Fender special-design 12" Eminence USA PRO speaker with stamped frame
• Compression driver horn with full attenuation
• Real wood cab
• Tilt-back cab design
• Spring-loaded handles
• 3 bands of EQ with semi-parametric mid
• Compressor
• XLR output with level for recording or PA reinforcement
• -6dB input pad
• Mute switch with LED
• Contour (a variable scoop applied to mids)
• Headphone jack for silent practice
• Effects loop
• Tuner out

Any bassist can use a super portable combo with pro features and sound. This is it. Order today.

The Bassman 250 HD Head delivers 250 watts (at 4 ohms) of full-size sound!

The full feature set and sound of this amp head has a very PRO 400/PRO 800 vibe. Mounted in a cool carpet-covered enclosure, the Bassman 250 HD has a high-quality XLR output great for recording or amplifying a live signal, plus two 1/4" speaker outputs and one Speakon® speaker output.

Two cabinets ideal for this amplifier head are the Bassman 410 and Bassman 115, each of which is rated at 8 ohms and ready to pair up for a great full or half stack.

Fender Bassman 250 HD 120V Bass Amplifier Head Specifications:

• Covering: Black Carpet with Black Metal Grille and Brushed Aluminum Control Panel
• Weight: 29 lbs. (13.15 kg)
• Dimensions: Height: 6" (15.24)
• Width: 23.5" (58.4 cm)
• Depth: 13.5" (34.3 cm)

Fender Bassman 250 HD 120V Bass Amplifier Head Features:

• Series: Bassman® Series
• Type: Solid State Bass Amplifier Head
• Output: 250 Watts
• Ohms: 4 ohms
• Speakers: None
• Channels: 1 Channel
• Features: -6dB Input Pad (for High Output Basses)
• XLR Line Out Jack for Recording or PA Feed
• High Frequency Horn with 3-Position Attenuator Switch (FULL / -6 dB / OFF)
• RCA Auxilliary Input Jacks for Playing Along with Tape or CD
• Mute Switch
• Tuner Output
• Effects Loop
• Headphone Jack
• Plywood Cabinet (No Particle Board)
• Heavy Duty Spring Loaded Handles
  
  Controls: Front Panel Controls
• Input Jack
• -6dB input pad (for high output basses)
• Input volume (to set proper incoming level)
• Compressor (fixed threshold, adjustable ratio)
• Contour (a variable scoop applied to the MID section for slap style playing)
• Bass, Low and High Semi-Parametric Midrange (Freq / Level), Treble
• XLR output with Level control, PRE/POST switch and Ground Lift switch (live, recording)
• Mute switch (with LED to indicate Mute ON)
• Master Volume
  
  Rear Panel Controls:
• Speaker Out (4 Ohm min, full power internal, unplug internal cable for use with external cabinet)
• Headphone input (for silent practice)
• AUX in (RCA style input jacks for use with CD player or similar)
• Effects Loop (send and return)
• Tuner Out (still functions when the amplifier is MUTED)
• Removable IEC style cable

Get the amp you've been waiting for. Order now.

The Fender Bassman 250/115 Bass Combo Amp will fill your gig with thick bottom-end pump. 250W bass amplification designed to deliver full power through an Eminence USA-made 15" driver and a compression driver horn. Real wood cab with removable casters and spring-loaded handles. 3 bands of EQ with semi-parametric mid, XLR output for recording or PA reinforcement. With horn attenuation, it covers a full tonal range from warm and bassy to bright and edgy.

Fender Bassman 250/115 Bass Combo Amp Specifications:

• 23"W x 25-1/4"H x 14-1/2"D
• 63 lbs.

Fender Bassman 250/115 Bass Combo Amp Features:

• Full internal power with removable speaker cord that can be used for an external cab
• 250W power
• Fender special-design Eminence USA PRO 15" speaker with stamped frame
• Compression driver horn with full attenuation
• Real wood cab
• Removable casters
• Spring-loaded handles
• 3 bands of EQ with semi-parametric mid
• XLR output with level for recording or PA reinforcement
• Horn attenuation
• -6dB input pad
• Mute switch with LED
• Contour (a variable scoop applied to mids)
• Headphone jack for silent practice
• Effects loop
• Tuner out

Fender Bassman 250/115 Bass Combo Amp Includes:

• '

It'll do it all practice, rehearsal, and gig with professional sound. Order today.

The Fender Bassman 250/210 Bass Combo Amp gives you elegant bass amplification designed to deliver full power through 2 Eminence USA-made 10" drivers and a compression driver horn. 250W, real wood cab with removable casters and spring-loaded handles. 3 bands of EQ with semi-parametric mid, XLR output for recording or PA reinforcement. With horn attenuation, it covers a full tonal range from warm and bassy to bright and edgy.

Fender Bassman 250/210 Bass Combo Amp Specifications:

• 23"W x 25-1/4"H x 14-1/2"D
• 63 lbs.

Fender Bassman 250/210 Bass Combo Amp Features:

• Full internal power with removable speaker cord that can be used for an external cab
• 250W power
• Fender special-design 10" Eminence USA PRO speakers with stamped frames
• Compression driver horn with full attenuation
• Real wood cab
• Removable casters
• Spring-loaded handles
• 3 bands of EQ with semi-parametric mid
• XLR output with level for recording or PA reinforcement
• Horn attenuation
• -6dB input pad
• Mute switch with LED
• Contour (a variable scoop applied to mids)
• Headphone jack for silent practice
• Effects loop
• Tuner out

It'll do it all practice, rehearsal, and gig with professional sound. Order today.

300 all-tube watts for amazingly rich and creamy tone, 2-channel tube preamp, compressor, footswitchable channel switching, 10-band graphic EQ, and extensive patching capabilities provide everything a modern bassist with a golden ear could hope for. 6 - 6550 power tubes, plus 3 - 12AX7s and a 12AT7 produce that cascading full tube tone that solid state can only emulate. 26"W x 11"H x 16"D. 75 lbs.

Fender Bassman 300 Features:

• 300W, all-tube head
• 2-channel tube preamp
• Split-band compression
• High-/low-compression level controls
• Compressor EG balance
• Selectable 10-band graphic EQ
• EQ in/out switch
• Balanced XLR line output
• 1/4" phone line output
• Tuner output
• System mute (tuner only) switch
• Master volume
• Input pad for active or passive instrument
• High and low enhancement
• Mid-notch filter
• Effects loop
• Gain
• Mix control
• 2 speaker output jacks
• Switchable impedance

Fender Bassman 300 Includes:

• footswitch

Search no more for that elusive, high-powered, all-tube tone. Order today!

The Bassman 410 bass speaker cabinet was designed to provide a quick and punchy tone. And with 700 watts programmable power (350 watts continuous) at 8 ohms, four 10" Eminence speakers and a compression driver horn with full attenuator, it's ideal for medium power usage.

The Bassman 410 amp has similar tonal characteristics to the PRO series cabinets in a low power-handling platform, and features carpet covering with metal grille, removable casters, spring-loaded handles, and 1/4" and Speakon® inputs.

Fender Bassman 410 4X10 Bass Cabinet Specifications:

• Covering: Black Carpet with Black Metal Grille
• Weight: 71 lbs. (32.20 kg)
• Dimensions: Height: 25" (63.5 cm),
• Width: 23" (58.4 cm),
• Depth: 14.5" (36.83 cm)
• Power Handling: 700 Watts (Program), 350 Watts (Continous) Handling Capability

Fender Bassman 410 4X10 Bass Cabinet Features:

• Ohms: 8 ohms Impedence
• Speakers: 4-10" Fender® Special Design Eminence® 8 ohm, 87.5 watt Speakers, P/N 0068843000,
• 1 Compression Driver High Frequency Horn P/N 0048847000
• Features: Attenuator on Horn, Dual, Parallel Wired, 1/4" Jacks, Perforated Metal Speaker Grille, Heavy Duty Spring Loaded Handles, Controls: Horn Attenuator (Rear Panel)

Save BIG when you buy today!

Fender's MB-1200 is a power-only mono block amplifier that can drive a pile of speakers and do it with a sound and response that convey the nuances of the player's style. It is designed to handle 2-ohm loads effortlessly and has 6 speaker outlets and the power for such setups as 2 - 8x10 cabs, 4 - 4x10 cabs, or 2 - 2x10 cabs combined with 2 - 1x15 cabs. Together with a preamp such as Fender's TBP-1 (sold separately), it creates a flexible system where the number and types of speakers can be changed to fit the venue size.

Fender MB-1200 Bass Power Amplifier Features:

• 1200W @ 2 ohms
• Power-amp pass through allows linking of multiple MB-1200s
• 1/4" and XLR inputs
• 6 speaker outputs (4 -1/4" and 2 Speakon)
• Heavy-duty steel chassis with thick, milled front panel
• Brushed aluminum finish matches TBP-1
• 2U rackmountable

It's time to move to a modular rig that can be more flexible, and the MB-1200 is a great place to start. Buy it now.

Fender has designed the Rumble 100 Bass Combo to meet the needs of the beginning bassist. By building in all the essentials then holding the line on price, they've made it accessible to most anyone. The ported bass design holds a 15" special driver and horn driven by a 100W amp. Exclusive red stage light pulsates with your playing. The carpeted, ported cab has oversized corners and a metal grille.

Fender Rumble 100 Bass Combo Specifications:

• 21"W x 25"H x 13"D
• 60 lbs.

Fender Rumble 100 Bass Combo Features:

• Ported bass design
• 100W
• 15" special driver and piezo horn
• Carpet-covered cab
• Oversized corners
• Metal grille
• 4-band EQ
• Mid scoop switch
• Effects loop
• XLR line out
• CD input
• 4-band EQ

Click or call to get the best deal anywhere, then get ready to RUMBLE!

You'll find the Fender Rumble 15 Bass Combo Amp perfect as your in-house practice amplifier. Fender has designed the Rumble series to meet the needs of the beginning bassist by building in all the essentials, then holding the line on price to make it accessible to most anyone. The ported bass design holds an 8" special driver powered by a 15W amp. Fender built the carpeted cab of the Rumble 15 Bass Combo with oversized corners and a metal grille for durability.

Fender Rumble 15 Bass Combo Amp Specifications:

• 13-1/2"W x 14-1/2"H x 9-1/2"D
• 19 lbs.

Fender Rumble 15 Bass Combo Amp Features:

• Closed-back cab design
• 15W
• 8" special driver
• Carpet covering
• Oversized corners
• Metal grille
• 3-band EQ
• CD input
• Headphone jack

Click or call to get the best deal anywhere, then get ready to RUMBLE!

Fender has designed the Rumble series to meet the needs of the beginning bassist by building in all the essentials, then holding the line on price to make it accessible to most anyone. The ported bass design holds a 10" driver powered by a 25W amp. The speaker cabinet has carpet covering, oversized corners, and a metal grille.

Fender Rumble 25 Bass Combo Amplifier Specifications:

• 15"W x 17-1/2"H x 10-1/4"D
• 32 lbs.

Fender Rumble 25 Bass Combo Amplifier Features:

• Ported speaker cab design
• 25W
• 10" special driver
• Carpet covered cabinet
• Oversized corners
• Metal grille
• CD input/Headphone out
• Effects loop/preamp out
• 3-band EQ

Click or call to get the best deal anywhere, then get ready to RUMBLE!

Fender designed the Fender Rumble 60 Bass Combo Amp to meet the needs of the beginning bassist by building in all the essentials. Thankfully, they held the line on price to make it accessible to almost everyone. The ported bass design holds a 12" special driver powered by a 60W amp. The carpet-covered cab has oversized corners and a metal grille.

Fender Rumble 60 Bass Combo Amp Specifications:

• 18-3/4"W x 22-1/2"H x 12-1/4"D
• 46 lbs.

Fender Rumble 60 Bass Combo Amp Features:

• Ported bass design
• 60W
• 12" special driver
• Carpet-covered cab
• Oversized corners
• Metal grille
• Effects loop
• 1/4" line out
• Mid-scoop switch
• 4-band EQ
• CD input
• Headphone jack

Click or call to get the best deal anywhere, then get ready to RUMBLE!

A 4-band EQ, aux CD input, effects loop, headphone jack, passive/active pad, and XLR line out with level and ground lift give The Fender Rumble Series 100/210 Bass Combo Amp plenty of stage and studio flexibility. 100W deliver a surprising amount of punch through a pair of 10" Fender Special Design 8 ohm, 75 watt speakers. The ported cab is covered with rugged carpet and has reinforced corners and a black metal grille that'll stand up to years of road rage.

Fender Rumble Series 100/210 100 Watt 2x10 Bass Combo Amp Features:

• 100W at 4 ohms
• 2 -10" Fender speakers
• 4-band EQ
• Mid scoop button
• Aux input
• Delta comp adaptive compression
• Effects loop
• Headphone jack
• XLR line out with level and ground lift
• Ported cab
• Carpet covering
• Metal grill
• Reinforced corners
• 24"W x 21"H x 14-1/2"D
• 62 lbs.

Order today and enjoy solid Fender quality for a very reasonable price!

The Fender TB 1200 Bass Amp Head delivers 1200W at 2 ohms, ideal for running multiple speaker cabinets while keeping its cool. Fender's family of TB bass amps were created for professional bass players looking for a thick, natural, and balanced tone that sits fat in their live or studio mix.

Based on the TBP-1 tube bass preamp, the key to the Fender TB-1200 Bass Amp's creamy tone is a passive tone stack, the backbone of classic Fender guitar and bass amps. A passive tone stack is interactive, with each knob affecting the others. You get big warm notes that faithfully represent the natural sound of your bass. Fender includes a 4-button TBFS-4 footswitch that gives you easy access to Overdrive, Vari-Q, FX Loop, and Mute, as well as its own built-in tuner.

Fender TB-1200 Bass Amp Head Specifications:

• Weight: 48 lbs.
• Dimensions: 19"W x 3.5"H x 15"D
• Tubes: 2 X 12AX7
• Output: 1200W at 2 ohms, 800W at 4 ohms, 550W at 8 ohms

Fender TB-1200 Bass Amp Head Features:

• Hybrid head: (tube preamp, solid state power amp)
• 1-Channel
• Front panel controls:
• Vintage Tube Tone - Input, -9dB pad switch, Mute, Volume, Bass w/Deep switch (pull to activate), Mid, Treble w/Bright switch (pull to activate)
• Tube Overdrive - (Enable/Disable Switch), Gain, and Volume
• Blend Vari-Q - (Enable/Disable Switch), Frequency, Level/Q, Room Balance, and Master Volume
• Rear panel controls: Balanced Line Output with Ground Lift, XLR Jack, Level, Pre/Post EQ Select Switch, FX Loop with Trim, +4dBu/-10dBv level switch, Send/Return jacks
• Effects: Fender passive tone stack, Tube Overdrive section, Vari-Q section, Room Balance, FX Loop/Boost
• Brushed Aluminum rackmount panel covering
• TBFS-4, 4-button footswitch with built-in tuner

Fender TB-1200 Bass Amp Head Includes:

• TBFS-4 footswitch

The best of both worlds, this hybrid features a tube preamp with a solid state power amp. Order today!